Forms removing system resources

I have a forms 4.5 application which seems to be eating the system resources on my users machine. After a period of time, there system resources are so low( jumps from 55% to 5%) that they can not print or open another app. When they close the Forms, there resources returns to normal. I believe this is happening on a form that has many canvases and tabs. Is there a way to figure out where on a form is causing this problem? Anybody have any ideas?

Thing is I am scheduling jobs through third party tool,FLOW MANAGER,and i am using SAS,I have to extract data from SAP and load into oracle table,oracle 10g,OS:HPUX itanium
when i run my job from SAS Application i,e SAS DI (ETL TOOL) it works fine and target table gets loaded witin 5 mins but when i schedule the same from third party tool it takes hours to execute
I want to check system resources at oracle end like how much memory,cpu time ,elapsed time being used ,can you plezse help it out.
How should i check the system resources.
Thanks ,

Similar Messages

  • Interactive form takes 10-15 minutes to open and exhausts system resources.

    The version of Livecycle designer am using is 7.1
    The interactive form that I designed is taking like 10-15 minutes to open and while its opening, its taking all the system resources as I see a prompt on the task bar besides time/date  "Virtual Memory Minimum Too Low".
    The tutorial project works fine, the TravelRequest.pdf opens just fine: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/offline%20interactive%20pdf%20form%20using%20download.pdf
    Would installing version 8.0 solve this ?
    I am on NWDS sp18.
    Thanks
    Tony

    Hi,
    Refer to the following blogs which explains the steps to improve the performance.
    Offline Part u2013 I /people/sankar.narayana/blog/2008/12/23/dynamic-generation-of-offline-adobe-interactive-forms-for-sap-46c-and-ep-70-without-user-intervention-part-150-i
    Offline Part u2013 II /people/sankar.narayana/blog/2008/12/30/dynamic-generation-of-offline-adobe-interactive-forms-for-sap-46c-and-ep-70-without-user-interventionpart-ii
    Adobe Performance : /people/ramesh.kotagiri/blog/2008/12/30/sap146s-magic-solution-to-obtain-amazing-performance-of-dynamic-adobe-interactive-forms-using-zci-forms-zero-client-installation
    Installing the Adobe 8.0 also improves the performance.
    Thanks & Regards,
    Jhansi Miryala

  • Cannot use Enter Persons Form because Human Resources fully installed

    I have recently installed 11.5.10 (using RapidInstall, with the sample Vision database). A problem I encounter is that when I try to enter an employee, an error pops up:
    APP-PAY-06041: You cannot use the Enter Person Form because Human Resources is fully installed. Instead, use the Human Resources People Form.
    Since I don't need the HR module, how can I disable/uninstall/remove it?
    Any help or pointers to any user guides will be appreciated.

    Hi,
    Uninstalling Human Resources is simply not possible.
    you can try to trick the system by setting HR back to Shared install. One single update can do that. Do not try this at home.
    If that is not enough, you can do a minimal implementation of HR, so that the full install people form works correctly, and so bypassing the shared people form in finance.

  • Why the video playback stotter but audio is ok and all system resources are ok as well?

    Hi,
    I'm using Premiere Elements 12 and prepared a project using m2ts files of my sony camera. When I started the project, everything was find, editing easy. Now, some months later I wanted to finish the project on the same laptop ( Intel Cor i5-4200 2,50GHz, 8GB RAM, 64 bit Windwos 8.1, 1TB Hybrid HDD, dual graphic: Intel HD Graphics 4600 and NVIDIA GeForce GT740M). The system resources are not completly used during the playback, maybe 10 - 15% usage, RAM is between 20 and 50% usage, harddrive usage is between 10 and 40% usage. Video data are stored local on the harddrive (not on USB or network).
    When I open the original files in e.g. VLC or Media Player the playback is perfect, no interupts. The playback of rendered elements in Premiere Elements is without interupts as well. Only "native", untouched HD material stotters after a short time I'm working on the project. It's the same for other videos, when I start a new project. It's anoying me because it was the reason why I decided for the SW.
    I deinstalled Premiere Elements completly, used also CCleaner to remove unused registry entries... reinstalled it completly after some restarts... updated to 12.1.0.0 but after an afternoon of installation, the same issue is back.
    Who can help me to fix it? Thanks for your feedback.

    Player version 7.1.6 is a very old version but it should play H264 / AAC videos without issue.
    http://support.apple.com/kb/DL837?viewlocale=en_US&locale=en_US a link for a more modern version.

  • Error: insufficient system resources exist to complete the requested service

    Hi,
    Hope all are well. I am getting this error "insufficient system resources exist to complete the requested service" while trying to install Lookback Adapter on my Windows 7 Professional OS installed on my HP Laptop.
    Well, there is more to this problem. Actually I have VMWare installed on my Laptop where everything was working fine. At one fresh boot, I found VMWare Host-Only adapters were missing. So I tried to enable them and could never do so. I tried to troubleshoot
    a lot but couldn't get it working. Not sure why but I thought of uninstalling Lookback Adapter and reinstall and see if that works and there you go, I am getting "insufficient system resources exist to complete the requested service". I am sure if
    I can solve this one for Loopback Adapter, I can also make VMWare environment working as there definitely appears to be a relation between these two.
    So by now, I have at least read 20 different articles and did a "Clean Boot" of OS and uninstalled all unnecessary applications from it. But I still can't install Loopback Adapter.
    Can some Microsoft expert provide a solution? I can see many people facing this problem and many of them haven't found a solution. Note that I have admin rights on my OS.
    Any quick help will be greatly appreciated!
    Thanks,
    N Jo

    Based on the information found on the internet and on the Microsoft website, there is nothing wrong with the OS.
    How much personal research have you done looking for solutions?
    See Microsoft info links @
    http://www.microsoft.com/en-us/search/results.aspx?form=MSHOME&mkt=en-us&setlang=en-us&q=microsoft%20loopback%20adapter%20windows%207
    See Google info links @
    https://www.google.com/search?lr=&as_qdr=all&q=microsoft+loopback+adapter+windows+7&revid=308607325&sa=X&ei=KIOxU8zaNIqvyAT6soKQDw&ved=0CGgQ1QIoAQ&biw=1128&bih=871
    And based on the thread @
    http://social.technet.microsoft.com/Forums/windows/en-US/259c7ef2-3770-4212-8fca-c58936979851/how-to-install-microsoft-loopback-adapter it has been working for the past 5 years.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • What does it mean: Error Message "Low system resources" ?

    Hi,
    we are using CR out of Visual Studio 2005 and 2008 for a PDF export.
    We are able to start a report process and can see on the load of the process that the report seems to be generated, but we didn't received a report PDF file.
    We add the following Registry key (depending on CR version) to get log files:
    For 10.5: HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Report Application SErver\Server\
    For 10.2: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions\Report Application SErver\Server\
    and got the following error message:
    ErrorLog 2010  3  1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report.
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources.."
    ErrorLog 2010  3  1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report.
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources.."
    Maybe do you have any suggestions what the problem could be? What does it mean with "Low system ressources"? There should be enough memory, hard disc size and cpu power on the machine.
    Please let me know if you need any further information.
    Thank you very much for your help in advance!!
    Best regards,
    Matthias

    Re logging. What I was referring was the following in  your post:
    We add the following Registry key (depending on CR version) to get log files:
    ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report.
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources.."
    ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
    Error formatting Field Object.
    Failed to export the report
    Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
    Low system resources..".
    I think we want to back up a bit here. I am not sure what  "Low System Resources" means or what it's about. So, let's try the following:
    1) Are you able to export to any other format?
    2) Are you able to print to printer?
    3) Try a new simple app and add a viewer to the form. See if export from the viewer export button works.
    4) In the above new app, export to CR report format from the export button on the viewer toolbar.
    5) If you are able to get an exported rpt file, it will have saved data with it. Run that report in your original app (comment out any db logon code). Can you export a saved data report?
    6) Make sure you have read / write permissions on the win\temp directory
    7) What database are you connecting to and what is the database connection method (OLE DB, ODBC, etc.)
    Ludek

  • After Effects does not recognize correct system resources

    On my computer at work, I have After Effects CS4 and After Effects CS3. The computer is a 2x2.66 GHz Quad Core Intel Xeon with 8 gigs of ram running OSX 10.5.6.
    Both versions of After Effects can only see/use 1.7 gigs of ram. My understanding is that After Effects should see as available 3 gigs of ram. (On the identical computer at home I can in fact see 3 gigs of ram.)
    I need the maximum resources when working since I need to do longer HD ram previews. In addition at this low memory setting the software does not run right, with multiple memory crashes that should not be happening -- the kind of things that happen when you have insufficient system resources to run a program. I'm an advanced user who has been using this software for over 15 years -- it's not operator error.
    I'm hoping someone has some suggestions of things I can do to alleviate this bug.
    [As an additional note, the multiprocessing option is also telling me I have 16 processors, when I have only 8.]

    >  [As an additional note, the multiprocessing option is also telling me
    I have 16 processors, when I have only 8.]
    This is the easy question, so I'll deal with it first.
    This a borderline bug. After Effects CS4 isn't able to take advantage of hyperthreading (which turns 8 physical processor cores into 16 virtual processor cores). However, it can _see_ the virtual cores, and it reports them as being there. Yeah, it's misleading. We fixed it in After Effects CS5---and we fixed it in the good way, by making After Effects CS5 capable of using the virtual cores provided by hyperthreading.
    OK. Now for the harder question:
    > Both versions of After Effects can only see/use 1.7 gigs of ram. My
    understanding is that After Effects should see as available 3 gigs of
    ram.
    Please be very specific about what you mean by "see". Exactly what are your settings in the Memory & Multiprocessing preferences? (A screenshot would remove all ambiguity.)
    Have a look at this page: "FAQ: Why doesn't After Effects see and use all of my RAM?"
    Also, see this page, especially the first comment on the bottom.

  • Excel 2010 not enough system resources to display completely

    I have searched the web high and low for an answer to this issue we are having with one user who uses Excel 2010 quite extensively and I have not been able to find an answer that resolves the issue.
    She keeps getting the error message "Not enough system resources to display completely."  The spreadsheet in question is a simple two worksheet file that she does simple calculations on.  Her PC is an HP Elitebook 8560w (only 1 month
    old) with an i7 Intel processor, 8GB RAM, 500GB HDD with over 300GB free, Windows 7 Professional (64-bit) with all the latest patches and updates & Office 2010 Professional (32-bit).  The video and printer drivers are all update to the latest versions. 
    The spreadsheet is one she has used before on her older Windows XP Pro SP3 desktop with no problems.   We have tried the "set the Zoom to 100% or less" resolution that has been mentioned all over the web and it does not work. 
    We are still having this issue.  Does anyone know how to resolve this in Excel 2010.  I have seen the "solutions" for Excel XP, 7, 2000, 2003 and 2007 and they don't seem to work, or at least the ones I have tried!  :-)
    Would welcome all serious suggestions.  Mahalo Nui Loa!

    I've had this problem on several computers on our network.  I found various recommendations, but no solid answers.  I have resolved this problem on two computers with
    just the first steps performed.  The third computer require also following the step highlighted in yellow below:
    Deleted all temp files by:
    Start > Run > enter %temp% in the search box and press Enter
    Delete everything from this folder
    Cleared Recent Docs List & Lower Number Displaying:
    File > Options > Advanced > Scroll to Display category > change number of recent documents.  To clear the list, set this to 0 and save.  You can adjust up after that if you choose.
    Delete files from the following folders:
    (may have to view hidden files – top corner drop down > folder options > view tab > Hidden files and folders > select Show hidden files, folders and drives.
    Local Service:
    %windir%\ServicesProfiles\LocalService\AppData\LocalLow\Microsoft\CryptnetUrlCache\Content
    %windir%\ServicesProfiles\LocalService\AppData\LocalLow\Microsoft\CryptnetUrlCache\MetaData
    Network Service:
    %windir%\ServicesProfiles\NetworkService\AppData\LocalLow\Microsoft\CryptnetUrlCache\Content
    %windir%\ServicesProfiles\NetworkService\AppData\LocalLow\Microsoft\CryptnetUrlCache\MetaData
    LocalSystem:
    %windir%\System32\config\systemprofile\AppData\LocalLow\Microsoft\CryptnetUrlCache\Content
    %windir%\System32\config\systemprofile\AppData\LocalLow\Microsoft\CryptnetUrlCache\MetaData
    The above process worked to prevent this problem on two machines, but not another.  On the one that this didn’t work, I also
    Start > Programs > Windows Update > View Update History.  Look for KB# 2597166
    If it exists, click it and uninstall. 
    Can also try, though I didn’t.  I may do this first, but I didn’t feel this was my issue.
    Control Panel > Add/Remove Programs > Select Office > Change > Run Repair

  • SDK optimizing for low system resources

    Hello,
    I'm temporary working on legacy Pentium 133MHz machine with 64MB RAM Win98SE. After multiple unsuccessful probes with J2SE SDK 1.5.0.04 and previous version I stayed with JDK 1.1.8. It works without errors at least.
    My question is:
    does it possible to optimize recent versions of SDK for low system resources removing unnessesary features, modules, libraries etc.?
    Thanks
    Antanas

    Video editing via USB drive does not really work... the data transfer rate is too slow... you need eSata or Firewire 800
    eSata Dock http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t
    My 3 hard drives are configured as... (WD = Western Digital)
    1 - 320G WD Win7 64bit Pro and all program installs
    2 - 320G WD Win7 swap file and video project files
    3 - 1T WD all video files... read and write files
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for easy video editing
    One hard drive is not as good as two which is not as good as three

  • Automatically launching iCal at Login:  is it a drain on system resources?

    Since the persistent "July 17" iCal icon bugs me, I was thinking of having iCal automatically launch (hidden) at login.
    Can anyone knowledgable of such things comment on if keeping iCal running all the time would be a drain on system resources?
    I know the origin of the JUL 17 (the day iCal was first launched), but it's sort of a useless thing to note for anyone of than iCal software developers and Apple execs.

    Argelius,
    I run iCal continuously and find that it has no adverse effect on my system performance, but depending upon many variables starting with RAM your mileage may vary. When hidden, iCal uses 0.00% of the CPU.
    One of the best ways for you to determine the efficacy of an iCal automatic login with a continuously running but hidden iCal is to give it a try. If your system performance suffers, you should probably not use the automatic login feature.
    If you read Mac OS X: Reading system memory usage in Activity Monitor, and search for Activity Monitor you will find several articles which relate to evaluating your system performance.
    According to Troubleshooting Mac OS X by Dr. Smoke, some of the things that you can do to improve system performance are, getting more RAM, turning off the eye candy, make the Dock less entertaining, disabling window effects, using a static desktop background, skipping iTunes visuals, reducing the number of widgets, disabling automatic protection features, and removing unnecessary fonts.
    ;~)

  • Dekstop DC7800p Small Form Factor system

    Hi,
    I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
    From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes.
    Is there a way to do one of the following:
    - force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
    - force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
    I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
    It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
    Any advice would be greatly appreciated.

    After doing some research on the message, I came across this post.
    Apparently, your PC has a smart card optional system (maybe it was government surplus).
    http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
    Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
    Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
    Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
    I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC, but that one.
    You may want to post your issue on the HP business support forum, business PC section.  Hopefully someone there has experience with turning this feature on or off.
    http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
    You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
    RichS hasn't replied to a post in 3 years. Although someone else may.
    Good luck, and please post back if you find the solution to the problem.

  • Windows System Resource Manager deprecated

    Hi all,
    starting with Windows Server 2012 the "Windows System Resource Manager" is deprecated. What is the new functionality we can leverage on to achive the tasks managed by the old WSRM?
    I plan to deploy Windows Server 2012R2 and I need some memory / CPU management

    Hello, 
    We too agree with you 'Windows System Resource Manager (WSRM) is deprecated. Similar functionality is provided by Hyper-V."
    Please find the same in Features Removed
    or Deprecated in Windows Server 2012
    Regards, Ravikumar P

  • Does Serialization Remove Mac Resource Fork

    Hello all!
    Does the Java Object Serialization remove the resource fork of Macintosh files? Please give a short argumentation why or why not.
    If not, what happens with the resource fork after serializing: is a deserialized Mac file usable on other operating systems?
    Thank you very much for answering!

    This is a meaningless question.Well, let's see.
    You cannot serialize a file anyway.
    All you can do is serialize some objects and write the resulting byte sequence to a file.An object-oriented programming like the Java one is based on objects, classes and the relation between them. The objects consist of variables (that address the data) and methods (that operate on the data). The objects have a particular type and thus constitute classes. Since a file is a 'bag' of bits and bytes its contents can be read into a byte[] and serialized.
    The files on the Mac HPFS consist not only of a data fork but also of a resource fork. Another file systems, e.g. NTFS, process only the data fork and keep resources separately. I know that the serialization removes certain processor-specific issues such as endianess or word length. How about removing certain OS-specific issues as far as the Mac's resource fork is concerned? ... and so enabling files serialized on the Mac to be transfered to a different OS without loss of resource infos.
    Then later you can read the byte sequence and deserialize it to produce copies (more or less approximately) of the original objects.Yes, to be done on the non-Mac system: but if serialization does not handle the resource fork in some way it will be unpleasant (if not more) not to be able to deal with your deserialized files there.
    It must be more than clear now what I want to know: it's not a joke and has nothing to do with a mere homework or the like.

  • Can't open vcf file. "The file may not exist ... Out of memory or system resources"

    Trying to open a vcf file (vCard) from a user.  After double-clicking file, get message:
    Cannot open file: C:\folder\filename.vcf. The file may not exist, you may not have permission to open it, or it may be open in another program. Right-click the folder that contains
    the file, and then click Properties to check your permissions for the folder. Out of memory or system resources. Close some windows or programs and try again.
    I have Outlook 2010 with SP2.
    Similar error, different problem.  Has workaround:
    http://community.office365.com/en-us/f/172/t/198029.aspx
    I turn OFF cached exchange mode.  I double-click the vcf file, it opens fine.
    I turn ON cached exchange mode.  I double-click the vcf file, I get the erorr message again.
    We have hosted Exchange, so we can't turn off cached exchange mode in Outlook.
    Is this a bug?  Anybody know of a fix?
    By the way, if I save one of my contact as a vcf file
    and double-click it, it opens fine.

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • After removing system fonts and reinstalling fonts, FireFox will not start

    After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
    == This happened ==
    Every time Firefox opened
    == After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

    The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
    The file names will begin with '''bp-'''
    There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
    One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
    See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
    To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

Maybe you are looking for