Forms Timeout - Screen turn to blank if leave it idle for 5 min

Dear gurus,
I have a problem when ever i connect our oracle form through our OAS 10g, if the forms leave it idle after login more than 5 min and try to access again, the form will turn to blank screen and i have to force end task to re-connect again.
How do i overcome this problem?
Many thanks in advance
Edited by: sharwo on Oct 20, 2008 5:20 PM

It's the timeout of the http server (default value is 300 sec).
You can modify the timeout parameter with ASControl or in OHOME\apache\apache\conf\httpd.conf and restart the http server.

Similar Messages

  • I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

    I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

    If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Or sent it to Apple

  • HT2101 my i phne was exposed to a little water and then i put it under a table lamp to ensure ebvaporation of water . During this the phone was switched off. Later when i turned the phone n , it worked pine for 5 min and then the temp alarm came. Need hel

    Hi my iphone showed signs of moisture in camera area and so i kept it under a table lamp for a few hrs after switching off the phone. Later the moisture was gone so i switched on the phone and after 5 min of perfect operation an High temp alarm came. Every time i switch off the phone works fro 5 min and ten gets the alarm. How can i get my phone back to normal?

    Thanks for the reply, just being positive as the phone turns on fine and every thing works ok for 5 min and then the temperature alarm comes on. I am hoping that the issue may be limited to a perticular temperature sensor etc.
    I have got the phone opened and there was little water signs that have been cleaned with alcohol but the issue remains the same. I believe that the temp alarm is caused due to the phone being kept under the table lamp which raised the phones temp beyond the acceptable range and hence may be damaged one of the temp sensors. Heard that there are around 5 different temp sensors in the iphone. If any one has more knowledge please advise on how i can get this fixed.Thanks.

  • Firefox shows a black screen suddenly while browsing or when left idle for long time (more than 1 hr).

    Firefox suddenly turns totally black while I was browsing yesterday. I tried restarted it, and it works fine. In such state none of the menu or actions items are accessible. Even while closing the browser I get the confirmation popup which is also completely black.
    Screenshot link: http://prntscr.com/55kggq
    I had to randomly click on the "close tabs" button.
    I am using Mozilla Firefox v33.1 in Windows 7, 32 Bit OS with i3 processor, 4GB RAM.

    ''nescafe2002 [[#answer-663423|said]]''
    <blockquote>
    I've just had the same issue (sudden black screen while browsing), probably related to my graphics card driver which I've updated two days ago.
    Laptop model: ASUS N550JV CN270H
    Graphics card model: Intel(R) HD Graphics 4600
    Old driver: 10.18.10.3308 (2013-09-16)
    New driver: 10.18.10.3960 (2014-09-29)
    If the problems recurs, I will re-install the 10.18.10.3308 driver and post the results here.
    </blockquote>
    After 3 more blackouts, I restored 10.18.10.3308 and the problem went away.

  • How do I get to full-screen mode in Adobe Reader 10.4.4 for ipad mini? It's vanished.

    I updated Adobe Reader and now double tapping activates zoom. There does not seem to be any way to go to full-screen mode, and reading with the header (time and battery life icons) is unpleasant.

    Thanks for taking the time to post -- especially to a thread that was started almost a year ago.  I'll give your suggestion a try.
    Larry

  • Wait step in leave workflow wait for 20 min

    hi friends
      I have designed a multilevel ESS leave workflow. After 1st approver the status need to change from approved to sent after that i am using a wait step with condition REQ.STATUS = SENT. This condition is met immediately but it still waits there nearly 15 to 20 min after that only it goes to the next approver. I dont no y its happening even after the condition is met. There is background job SWWCOND is directly related to this wait step. I have scheduled this job for every 3 min. But its long time to execute. If i remove the wait step its shows dump. How to minimize the time of execution of the wait step.
    Regards
    vijay

    Hello,
    Let me know if I've understood the problem correctly.
    You have a workflow with two wait steps.
    These wait steps rely on the running of SWWCOND
    to check if the conditions have been satisfied.
    The workflow takes 15-20 mins to pass the first condition, even
    when already true, but takes little or no time to pass the second
    condition.
    SWWCOND is scheduled to run every 3 mins and doesn't run for more
    than a couple of minutes.
    My questions:
    - Are you absolutely certain SWWCOND runs every 3 minutes?
      Do you see that happening in SM37 while your workflow is waiting?
    - You've said that the first condition is REQ.STATUS = SENT,
      what is the second condition?
    - Is REQ.STATUS a virtual attribute?
    - Where is REQ.STATUS set to SENT? Outside of the workflow?
      Does it do so without an error? Is a commit work done?
    regards
    Rick Bakker
    Hanabi Technology

  • Internet hangs/drops after leaving it idle for a few minutes.

    Quick question that I've been pulling my hair out over... I have had a MBP for about 6 months now which I have been connecting to the internet via wireless router (Linksys WRT150N). I'm currently using OS X 10.4.11. For the most part, internet is lightning fast, but every half hour or so (or when I let the Mac sit idle for a couple of minutes, noting that I keep my sleep mode at 'never'), it hangs, saying that it can't find the server. Airport says I got a full signal, and tests say that everything is working properly, but Firefox and Safari are lights out. The way to get it back can be one of the following:
    1) Wait... sometimes comes back on if I wait a few more minutes (a pain in the rear!!)
    2) Re-boot... this does not work 100% of the time (also a pain in the rear!!).
    3) Plug my charger in and open Airport connection, which sometimes picks up the page loading (again, a pain in the rear).
    Anyway, I've been reading about some issues with both Tiger and Leopard's internet connectivity issues. One posting here (can't find it now) gave me some suggestions on changing the settings in my router settings page, which helped significantly, but I still have intermittent hangs.
    Any help would be totally appreciated (and sorry this is so long!).

    Not an infrequent problem on/for IntelBooks it seems, especially moreso running on Battery power.
    Some cures I've seen, no single one seems to work for everyone, and not all get cured...
    Changing the Channel on the Wireless Router.
    The following commands from the command line, (lasts until a reboot)...
    sudo sysctl -w net.inet.tcp.delayed_ack=0
    sudo sysctl -w net.inet.tcp.mssdflt=1492
    sudo sysctl -w net.inet.tcp.newreno=1
    sudo sysctl -w net.net.inet.tcp.always_keepalive=1
    The last cure I read about was a Cordless Phone being moved.
    The strangest cures, (2 or 3), was connecting once to a Wifi Cafe's hot spot, then never seeing the issue at home thereafter!?

  • Facetime screen turned green

    Why is my face time's call on the receiver's screen turn green a few minutes after the talk. MIne is Mac pro laptop with retina display. Thanks

    The device will shut down when the software detects potential danger to the hardware. Can either be potential or real danger. Device shuts down to protect the hardware.
    Please restart the device and give it another go. If you continue to hiave this issue you may consider restoring your device back to default settings.
    Good luck.

  • My ipad turns in but will not boot up. screen stays blank. I've tried resetting it and rebooting from itunes. It says it is done but the screen still stays blank. The apple icone will show up intermittetly.

    I turned on my ipad after charging it and the screen went blank. I tried the home button and on off button and that did not help. I went to iTunes and rebooted the ipad and restored it and it asked me to reboot from the ipad but the screen is still blank. It will go to a blue screen if I hit the on/off button. What else is there to check?

    If you restored the iPad, there is nothing else to check. I suggest that you make an appointment at an Apple Store Genius Bar and let them evaluate your iPad.

  • My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!

    My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!

    Restart your phone by holding the sleep/wake button and the home button until it starts back up.

  • Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

    hi,
    phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
    I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

    "Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
    But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

  • My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

    My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
    This is happening only since I have updated to new ios version (ios 8.1).
    Is there anyone facing similar issue?? Any suggestion?!?

    Hi jayla_mora, 
    Thanks for visiting Apple Support Communities. 
    It sounds like your iPhone screen is going blank and not responding. 
    You may find the tips in this article useful for troubleshooting this behavior:
    iOS: Not responding or does not turn on - Apple Support
    Best Regards,
    Jeremy

  • Screen turns blank all it sudden...

    I installed SL on a MBP all went normal, but now all it sudden the screen turns black. All I can do is to push the power on/off button till it reboots.
    All works fine and then all it sudden I loose the screen again.
    I was on skype with a friend while it happened, sound and everything else was still going fine, only the screen turned black (actually very dark gray).
    This happens since I installed SL, it does get a little better (had waaay more blank outs shortly after the install) but I normally don't get more then maybe 30 minutes out of the laptop before I have to restart it again.
    Any ideas? Any help?
    Sure appreciated.
    Thanks

    I had a similar experience this weekend. First road trip with my MBP converted to SL. I normally get the "you are running on reserve power" notification when I'm running low, but when watching movies on the flight out and back, the computer spontaneously went black - I thought it had shut down out of power. But both times when I later turned it back on I had more than 25% power still remaining. I was thinking it was some kind of problem between the DVD player app and low power notification, but after reading this I am wondering if the screen simply went black as is being described. Unfortunately I did not even try to reboot it after it went dead, assuming it was simply out of power.
    Picking up the 'book and putting it back in my briefcase it did not feel overly or unusually warm. On the way out I was running with an external drive connected to the 'book and on the way back I was watching a DVD ... so the only interesting symptom was that in both cases power usage was a little more (or at least different) than normal (I usually watch movies right from the hard drive). The worst thing is that the spontaneous shutdown on the way out seemed to have killed my little external drive - I mean dead. Can't even find it at all in Disk Utility - pretty weird, but that smacks of some kind of power event as well.

  • TS1702 I have approximately 400 lives in reserve as gifts from friends in Candy Crush, but every time I try to access them, the screen turns blank. It will only let me use the 5 lives you are given every 30 minutes. Updates are up to date.  Any suggestion

    I have approximately 400 lives in reserve as gifts from friends in Candy Crush, but every time I try to access them, the screen turns blank. It will only let me use the 5 lives you are given every 30 minutes. Updates are up to date.  Any suggestions?

    Contact the app develed.

  • IMac's screen turns blank randomly

    Hi,
    My iMac's screen turns blank randomly a few times in the past three days. It works fine after I reboost it. But, I have been keeping losing the files I am working on. Any one know what's wrong with it? Woud it be virus or malware? My mac is on OS X 10.6.8. 2.8 GHZ Intel Core 2 Duo, Memory 4 GB.
    Thanks a lot!

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Maybe you are looking for