Forms with Native(ZCI) Layout.
Hi Experts,
I am developing Forms with Native(ZCI) Layout. Offline the form is working fine. But online the form is creating issues. I have a button on my web dynpro screen. When I click on it to save the data in the form the form gets reloaded and data gets disappeared from the form. Please provide a solution.
Regards,
Vaibhav Tiwari.
Hi, Robert
In my scenario I have 2 views: General view with data and Print button and second view with PDF form. When pressed Print button I need display Pdf form on the second view with data from general screen.
I created a window and embeded a second view in it. And I displaying an Adobe Form in a pop up modal window.
Similar Messages
-
Layout Style "tree-form" with Wizard Style Layout checked
Dear all,
I am using layout style "tree-form" with Wizard Style Layout check box checked. intention is to display the hierarchy in tree and insertion with the help of Wizard for the last block. But with above settings, generated form is displaying as blank.
Example of required behavior: REGIONS should be displayed in Tree while the new Employees entry should be with the help of Wizard Style Layout.
Thanks in advance for help.
Muhammad ShafiqueMuhammed,
This combination is not supported. But you can acvhieve what you want by creating a separate group to insert a new employee. This additional group should have form layout, wizard checkbox checked, and "Add Menu Entry" option unchecked.
Then you can customize the New button in the existing tree-form employee group to navigate to the new employee wizard group.
Steven Davelaar,
JHeadstart Team. -
Form with webutil functions. How identify if user is using native internet
Hello,
I have one form with some webutil functions. How can i identify if a user is using the form with native internet explorer?
If a user with jinitiator use the forms, its ok, but when a user use native internet explorer, he gets error orcle.forms.webutil.fileTransfer bean not found. WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work.
When the user use internet explorer native, I want disable the webutil function before generate a file on the application server and then download to a client machine.
Im using Forms10g and Forms10gR2.
Thanksdo you have two different config-sections for the two modes?
If so, you could either place a different value for each one in the otherparams-tag and read that at runtime, or use a different env-fiel and set some variable with different values for each config in there and read it via TOOL_ENV. -
ISR drop-down lists with ZCI layout
Hi,
We are developing a custom ISR scenario on Netweaver 2004s SP11 and Adobe LiveCycle Designer 7.1. Our Interactive form has a drop-down list which is supposed to get prefilled. When we use the ZCI layout, the drop-down is not showing any values. If we simply change the layout type to Standard, it is working fine. While using ZCI layout, we inserted the webdynpro script and used ISR native controls.
Why the drop-down is not working with ZCI layout? Are we missing any thing?
Appreciate your response
Thanks
RamIt is solved. The issue was with binding.
-
Online Interactive form - ZCI Layout
Hi All,
I'm creating an online form on release 701 level 2 and am having problems with ZCI layout.
I have created forms before with this layout to use feautures such as search help.
Can anyone tell me what the latest recommended layout format is, ZCI or Standard?
With Standard layout my form interface binding works but search helps lock up the form after use but with ZCI the search help works but only the field with the help is bound to my interface successfully on the submit method.
I have reverted back to Adobe Reader 8.2 but this is still extremely flaky.
Thanks,
GregorHi Chintan,
Yes the script has been inserted. The more I look at this the more I am thinking that online interactive forms are not fit for purpose.
I guess there are some use cases but a web dynpro page would serve this purpose better with better integration into SAP etc.
I am using version 8.2 of Adobe Designer but keeping versions of Designer and Reader and different versions of the ZCI script in line is not feasible. Adobe Reader can auto update so what if a user has updated from 8.2 to 8.3 and suddenly all the forms stop working?
I understand that integrating between the browser and the embedded PDF is no mean feat but I'm going to stick to using Adobe Forms for offline use or print outputs.
tl;dr HERE BE DRAGONS -
Large interactive form ( ZCI layout ) SAVE problem
Hi Experts,
Please advice.
We migrated our interactive forms to ZCI layout and they work fine.
But when the form size exceeds 2 MB (this varies), we observed the following two cases.
<b>Case 1 )</b> In upload of an offline form, on 'ShowForm' action, the form opens, but when the 'SAVE' button ( placed in the webdynpro and not on the adobe form) is pressed, the browser shows the processing icon, but nothing happens at the server side. The corresponding action method is not called.
If the size of the form is small, then it executes successfully.
<b>Case 2)</b> During upload of the offline form ( only when large form), on 'ShowForm', after showing processing icon for a long time, nothing happens and the following exception is thrown.
<b>Initial exception</b> -- java.net.SocketTimeoutException: Read timed out
<b>Detailed exception</b>
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to GENERATEPDF
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:392)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:895)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:244)
... 29 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
java.net.SocketTimeoutException: Read timed out
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:408)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3958)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:148)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
... 32 more
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
java.net.SocketTimeoutException: Read timed out
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:385)
... 35 more
Caused by: java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:553)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1432)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)Hi Mona...
Refer to the following SAP Note 867502 . In addition you can also check out this blog:
/people/r.eijpe/blog/2007/01/08/performing-sap-interactive-forms-by-adobe
Hope this helps.
PS. Reward points for helpful answers. -
No Save option with ZCI Layout
Hi,
We are currently implementing HCM Forms in MSS and using Adobe interactive forms for the same. We were initially using the standard layout. However, as recommended by SAP, we switched to the ZCI layout format.
However, with the new layout, when the Adobe forms shows up on the portal, the save icon to save the form on the hard disk is not coming up anymore. Basically the entire toolbar which allows Saving, Printing etc is not there anymore. We can still print the form by right clicking on it and selecting the Print option. However, there is no option to save the form.
We would also like to add the Digital signature functionality to the form and wondering how to go about that.
Any help will be appreciated.
Regards,
AlokI am checking this out. In all the scenario which i have tested.. by default the toolbar is visible. I doubt somebody might have written some code to hide it by default.
We can hide the tool bar through coding ... But not very sure why it is happening in your case
Please refer to the help file for the coding to hide the toolbar
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Also we can hide the tool bar through java script.
Please check if any of the code is written in your case. Otherwise you can do coding to do the reverse means to display the tool bar by default.
Cheers
Satya -
Print layout with native client
I have a user who is printing calendar pages with a customized layout. She wants to know if it's possible to print the pages without the acceptance marks on them (ie, no accepted, denied, or maybe checkmark, x, or question mark).
I can't see a way to do it, but I could be missing something. Does anyone know if there is a way to do this?
Thank you,
MikeBonjour Michael,
Acceptance status will always be printed and unfortunately this can not be customize.
This way, when users are printing on a black and white printer, it makes it easier to determine the status of the event.
Thank you for your understanding in this matter,
Manon Delisle -
F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
Hello,
I have created an Interactive Form with ZCI type.
I placed a text field MATNR on the form.
Then I placed a Native WD UI element 'Value Help' as mentioned in the below link: http://help.sap.com/saphelp_nw70/helpdata/EN/42/fb2fe500553ee4e10000000a1553f7/frameset.htm
This form was then embeded into Web Dynpro ABAP view.
The problem is that when I click on the F4 button, nothing happens.
Is anything else needs to be done?
Thanks
SagarHi Amol,
After binding the Context variable in the view, and in the Adobe Layout Designer from the Library go to WebDynpro Native Tab and drag and drop the Value Help and for this automatically JavaScript is being generated, go that script and edit the line
Var fieldname = "yourfieldname";
Note: Don't forget to link the context attribute to search help. ie. in the context properties of the attributes select the input help mode as dictionary search help and specify the name of the search help present in data dictionary.
And now go to Utilities and click on u201CInsert Web Dynpro Scriptu201D.
Also make sure that you specify the Layout as ZCI Layout in the Propertioes of the Adobe Form.
Ragards,
Amol Patil. -
Search Help on Adobe Interactive Form with Web Dynpro ABAP
Hi All,
I have created Adobe Interactive Form with ZCI type and XML based interface type using Webdynpro ABAP.
I placed a text field USER_NAME on the form ( data element is linked to search help USER_COMP ).
Added Native WD UI element 'Value Help' to form to search for users and changed script
*var fieldName = "INSERT_NAME_HERE*"; to var fieldName = "USER_NAME";
The problem is that when I click on the value help button, nothing happens.
Is any more additional steps required ?
Thanks
KaruHello
Check this
F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
Thanks
Anirudh -
Friends,
I am creating an Adobe Interactive form of ZCI Layout type.
When i select "ZCI Layout" type in Properties tab of the form, i get the message "Check the Web Dynpro script of the layout". I opened the Utilities menu entries and the "Insert Web Dynpro Script" options is not enabled. i am unable to leave the Properties tab to Layout tab, unless i change the Layout type to "Standard Layout" type.
Please let me know how to create a form with ZCI Layout type.
Points will be rewarded for helpful answers.
Thanks and Regards.Hi,
I inserted a interactiveForm element under rootuielementcontainer.
I entered a "Z_temp_form" in templatesource property of interactiveform element.
Then I select the interactiveform element and rightclick and in the context menu I selected the "Navigation to form builder". It opens the Adobe Live Cycle Desinger. The form layout type property is set to Unknow Layout Type. When I tried to change it to ZCI layout. I am getting the same error.
Thanks
Sundar -
Dear Experts,
I am new to PDF and interactive forms development and i have a webdynpro component where the layout is Interactive form. However my PDF form is not an interactive one, Its just a PDF print form.
I recently went for the BC480 and BC481 training and confused about the layout part when used with Webdynpro. Is it mandatory that we have to use ZCI layout for non interactive forms also?
Can anyone throw some inputs on this?
Thanks,
Rajesh.Hi,
I inserted a interactiveForm element under rootuielementcontainer.
I entered a "Z_temp_form" in templatesource property of interactiveform element.
Then I select the interactiveform element and rightclick and in the context menu I selected the "Navigation to form builder". It opens the Adobe Live Cycle Desinger. The form layout type property is set to Unknow Layout Type. When I tried to change it to ZCI layout. I am getting the same error.
Thanks
Sundar -
Error in generating form with 6i
I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanksHere is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena -
How to 'flatten' interactive forms with Fixed Pages?
I have a large project I am working on that is automating the population of forms with strict layouts. (Provided by State governments for licensing requirements). I have the need to generate flattened version, or image of the document as one of the last steps of the process. The final step is to use "Insert Pages" to include into the newly created PDF, other PDFs that were attachments to the original document. These would include employment histories, Residential histories, etc. all are in PDF format.
The current method is to print the main document to "Adobe PDF", and save the file as a PDF to the file system. This newly saved PDF will accept Inserted pages as it is no longer deemed interactive with Fixed Pages, where the original with Fixed Pages will not accept insertions.
I have not been able to find a way of doing this via Javascript.
My goal is to find a way to flatten or image the document, then insert the attachments into the main document to create one compound instrument that records the licensure filing, and can be printed off and sent to the government, and retained for proof of filing.
Any ideas of how to replicate the print to "Adobe PDF" function and retain a handle to the new document object would be greatly appreciated. The fileName feature on the print method seems to be limited to ".ps", and ".prn" extensions.
Thank You
MarkI have not been able to Add Pages to a form that has Fixed Pages - either through the UI, or JavaScript. Options are greyed out in the UI.
Could you expand on what you mean by "You can set the Designer properties to Print Form"?
Thanks
Mark -
Urgent! form with webutil works with IAS but not with the 9iDS
I'm configuring a standalone PC on which i can run forms as if they were running with an IAS. Now we have a form which uses webutil. This form runs fine in our IAS-environment, but fails on the standalone PC.
On the standalone machine I'm using 9ids (9.0.2) to run this form. When the form is started I'm getting an error: FRM-40734 Internal error PL/SQL error occurred. This is caused by calls to the webutil-routines client_win_api_environment.get_windows_username and client_win_api_environment.get_computer_name
(When I comment out these calls, the form doesn't return an error)
Below I've included the messages on the Java Console. I can't see anything wrong:
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Administrator\Oracle Jar Cache
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\Administrator\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://min-ea47a8eabc66:8888/forms90/webutil/webutil.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://min-ea47a8eabc66:8888/forms90/webutil/jacob.jar from JAR cache
Loading http://min-ea47a8eabc66:8888/forms90/java/f90all_jinit.jar from JAR cache
Loading http://min-ea47a8eabc66:8888/forms90/hsd65java/hst65.jar from JAR cache
connectMode=HTTP, native.
Versie van Forms-applet is: 902110
2004-jan-28 11:51:50.906 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:50.921 WUI[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:50.921 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:50.921 WUF[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:50.937 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:50.937 WUH[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:50.937 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:50.937 WUS[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:50.953 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:50.953 WUT[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:51.00 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:51.00 WUO[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:51.00 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:51.15 WUL[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:51.15 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-jan-28 11:51:51.15 WUB[VBeanCommon.getIPAddress()] 127.0.0.1
2004-jan-28 11:51:51.625 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.jacob.dll
2004-jan-28 11:51:51.640 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2004-jan-28 11:51:51.640 WUT[loadSettings()] local properties file loaded
2004-jan-28 11:51:51.640 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2004-jan-28 11:51:51.640 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.JNIsharedstubs.dll
2004-jan-28 11:51:51.656 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2004-jan-28 11:51:51.656 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2004-jan-28 11:51:51.656 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.d2kwut60.dll
2004-jan-28 11:51:51.656 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2004-jan-28 11:51:51.656 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
I hope anyone can help me with this problem. I0m getting a bit desperate.....I've tried your suggestion and the newly created form works on both environments (the standalone PC with the iDS and the "normal" evironment with an IAS). Then I added another button to this newly created form with the code "message(client_win_api_environment.Get_Windows_username);"
This also works in the new form. Then I added some debugging code to the webutil.pll and discovered that when I use the above code in the new form everything is ok, but when I use the call client_win_api_environment.Get_Windows_username the following exception is raised in the gew_windows_username-procedure: CLIENT_WIN_API.NOT_AVAILABLE
I've compared the newly created form with the original from and can't discover major differences between the two forms. Do you have another idea where to look?
I noticed I forgot to mention both forms are created with oracle designer.
Maybe you are looking for
-
To add the line item in Sales Order
Hi Experts, I have to insert the line item between two line item in sales order dynamically. How should i do this. any idea?? Thanks in Advance.
-
Is it possible to install Windows 7 on Retina MacBook with a shared CD drive?
My school provides Windows 7 Ultimate upgrades to students My friend installed Windows 7 normally even though it's technically an upgrade (burned the .img file to a DVD using Disk Utility and installed it through the Boot Camp Assistant tool in Snow
-
How to create Schema Header and footer with Pipe delimiter file..?
Hi all, I have issue with creating Schema Header and footer with body file ..The file format is Pipe delimiter.. The follwing file below like is... Adapters:File Adapter(Read)-11g. 1|000|2025|SDFG|54787 1|2055|244|9566|000|000|044|2577|361147|45554|w
-
last few days i am facing the problem of extraction of lo cockpit data source "data package transferred to Bi system but not loaded into target" transfer rules and update rules are activated successfully . errors: 1.sid is missing in 0coasquanty. 2.
-
Office 2003 install with MSI and MST
I have created an install of Office 2003 from an Admin point on the network using a transform file. Gave the application Unsecure System User and when it runs, it will not remove the old version of Office 2000. But if I run the exact same MSI applica