Forms: working and not working. A serendipity question?

Designed a 4 pp form monthly report.
(Extended features in Adobe Reader are already applied)
Eight persons will fill it in order to sent to specific clients who only will read it
But only two say it works. And told that sometimes the information could no be saved...
Doing this in Pc and Mac.
At the same time other people (in our office and some friends) said it worked...
How to detect the problem?
They updated Acrobat Reader version 8.
Does the end user need to hace Reader 8?
Is necessary to save the form in some way before sending it to the end user?
(Some body in this forum proposed as a solution to print as PDF. What does it mean?)
Perhaps do they need Reader extensions?
Of course, they want to come back to MWord, losing the time invested in the form... and losing the advantages offered by Acrobat.
Thank you.

First step should be to compare the environments of the users, starting with:
- Operting System (Windows/Mac), and version (XP,Vista, Windows 7, etc.)
- Reader version (also making sure they're actually using Adobe Reader, and not some 3rd-party application, like Preview on Mac)

Similar Messages

Screen sharing worked and not working

i have set up both my computers for screen sharing and have accessed my macbook pro 17" (snow leopard- up to date) for months on my macbook pro 15" (lion- up to date)- it worked....
THEN, when i went in reverse- mb17" accessing my mb15"- it worked...
BUT NOW... neither can access eachother's screen remotely! haven't changed anything, but get the message that i need to 'check the screen sharing is enabled, that my network is working', OR i get the endless 'connecting to mb17"' window that never connects- on both computers!
HOWEVER- both computers can access files remotely... just not the screen
what to do? like i said, IT WORKED until my mp17" accessed my mb15" and neither works... like it cancelled eachother out!
any help would be greatly appreciated!

Hi,
Since the earlier post I have managed to Screen Share.
I did put the Mac Firewall On.
It was then as simple as using the item in the iChat Buddies menu (The option to allow sharing has to be On in the Video menu)
It replaced the Video I was having and does not go back to the Video when the Keystroke of Control+ESC is used and the Video chat has to be re-established.
I do not have Encryption.
9:04 PM Tuesday; November 13, 2007

Multiclip working and not working at the same time... not making edits

I sync'd and loaded my muliclips and it started off just fine, then i had to pause it while for a second, then i went back to it and it looked like it was running fine it was putting the blue marks in the timeline and my record monitor was switching fine. when i finished i clicked on the timeline and it didnt make the edits after i paused it. So the first half worked and the second half didnt, the blue marker points are still there. what could i have done wrong and is there anyway to put those edits in without redoing the whole clip over again?

Have you loaded the multiclip button bars?...Tools/Button Bars/Multiclip.
Exactly how are you working the multiclip...Buttons?, clicking in the viewer?
It sounds like you are 'switching' the shots and not 'cutting' them. If this is the case, then you'll need to re-edit the cuts you thought you were making.
As a general rule, I'll only go several 'cuts' at a time, then stop the playhead, let them activate, then carry on. The more cuts you do without stopping, the more you will lose, if you decide you want to make changes.
K

Proxy settings working and not working

Hi all,
I use a Mac Mini to develop within a proxy-controlled network. It's a Windows domain, btw. I have my user and password correctly set in System Preferences, and I use Safari to surf the web.
Well, the strange thing is that sometimes I can surf, sometimes not. Sometimes I'm answering in a forum and my answer gets lost... So I've asked the admin here to check the proxy requests of my Mini: he says that many requests arrive with NO AUTHENTICATION, anonymous.
Is this occurring to some other of you?
I suppose there is a bug in proxy settings management in 10.8.2.
Message was edited by: Bugfixer

I have noticed, that I had to change proxy server name to IP address and then Safari and AppStore started working.
Unfortunately any other application still doesn't work
It looks like after upgrade to Yosemite there is a quite big issue with use of proxy settings

I tried to work this for a telephone system Yvonne but stopped work and not work, what do I do

Tried to work this phone system iphone3g but stops working system did not speak ..What can I do to restart the phone???

Post in your native language... your statments make no sense in English.

Ipod touch 4g power button and volume buttons randomly working and not working

Help do any of you have the same problem?

Ok I sent my iPod to apple for free and they are sending me a new iPod touch 4th gen back

I have a problem in this that i want to paas a form in a case that when user pres n then it must go to a form but error arises and not working good and threading is not responding

made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
    class Program
        #region Cosmos Builder logic
        // Most users wont touch this. This will call the Cosmos Build tool
        [STAThread]
        static void Main(string[] args)
            BuildUI.Run();
        #endregion
        // Main entry point of the kernel
        public static void Init()
            var xBoot = new Cosmos.Sys.Boot();
            xBoot.Execute();
            Console.ForegroundColor = ConsoleColor.DarkBlue;
            a:
            Console.WriteLine("------------------------------");
            Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
            Console.WriteLine("------------------------------");
            Console.WriteLine();
            Console.WriteLine();
            Console.WriteLine();
            Console.WriteLine("\t _____
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |___________");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|_____|       |____________|         |____________|      ____________");
            string input;
            Console.WriteLine();
            Console.Write("\nAbout OS     : a");
            Console.Write("\nTo Shutdown : s");
            Console.Write("\nTo Reboot    : r");
            Console.Write("\nStart Windows Normaly : n");
            Console.WriteLine();
            input = Console.ReadLine();
            if (input == "s" || input == "S"){
                Cosmos.Sys.Deboot.ShutDown();
            else
            if (input == "r" || input == "R"){
                Cosmos.Sys.Deboot.Reboot();
            else
            if (input == "a" || input == "A"){
                Console.ForegroundColor = ConsoleColor.DarkBlue;
                Console.Clear();
                Console.WriteLine("\n\n\n-------------------------------------");
                Console.WriteLine("version: DISPLAYS OS VERSION");
                Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
                Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
                Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
                Console.WriteLine("-----------------------------------");
                Console.Write("You Want to know : ");
                input = Console.ReadLine();
                if (input == "version"){
                    Console.WriteLine("--------------------");
                    Console.WriteLine("OS VERSION 0.1");
                    Console.WriteLine("--------------------");
                else
                if (input == "about"){
                    Console.WriteLine("--------------------------------------------");
                    Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
                    Console.WriteLine("--------------------------------------------");
                Console.Write("Want to go back to the main window");
                Console.Write("\nYes : ");
                string ans = Console.ReadLine();
                if (ans == "y" || ans == "Y")
                    goto a;
                    Thread.Sleep(10000);
                else
                if (input == "n" || input == "N")
                    Thread.Sleep(5000);
                    Console.Clear();
                    for (int i = 0; i <= 0; i++){
                        Console.Write("\n\n\n\n\t\t\t\t\t ____        ____   ___
                        Console.Write("\n\t\t|\t\t | |      |    |
|   | | | | |");
                        Console.Write("\n\t\t|\t|    | |---- |    |
|   | | | | |---");
                        Console.Write("\n\t\t|____|____| |____ |___ |____ |___| |    | |___");
                        Thread.Sleep(500);
                    Thread.Sleep(5000);
                    Console.Clear();
                    BootUserInterface();
                    Console.ReadLine();
//                    Form1 fo = new Form1();
                else{
                    for (int i = 0; i <= 5; i++){
                        Console.Beep();
                        Thread.Sleep(1000);
                        goto a;
            while (true);
        private static void BootUserInterface() {
            Thread t = new Thread(UserInterfaceThread);
            t.IsBackground = true;
            t.SetApartmentState(ApartmentState.STA);
            t.Start();
        private static void UserInterfaceThread(object arg) {
            Form1 frm = new Form1(); // use your own
            Application.Run(frm);

Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT5312 Rescue email address not work and I forget my security question answers

Rescue email address not work and I forget my security question answers

If you don't have access to your rescue email account (you won't be able to change it until you can answer 2 of your questions), or you aren't receiving the email to it, then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to update your rescue email address for potential future use, or you could change to 2-step verification : http://support.apple.com/kb/HT5570

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

In dev server my payment advice form f110_prenum_chc is not working

hi,
friends i need urgent help.
1) i have copied f110_avis_in frm 000 client to 200 client with form name
   z_prenum_dup.
2) i have copied f110_prenum_chc frm 000 client to 200 client form name
zf110_prenum_chc1.
3) then i modified my both forms in 200 saved assigned TRs and
transported frm DEV server to PRD server(client 700).
4)in dev server 200 client my both forms are working
but in prd server 700 client my form cheque z_prenum_dup is
working but payment advice form zf110_prenum_chc1 is
not working.
5) but i can see my both forms r their in 700 prd server in se71 t.code.
6) if i run f-58 tr.code and by switching on debug mode i can see my
   cheque form but not payment advice form.
7) if i run in 200 client i can see my both forms.
can any body plz help me out of this issue.

Dear,
   I will be able to put some points, if you can give me some more idea about ur problem,
1, Does system giving any error..?
2, Can you see a preview..?
As I understood, it must not have any problem in transportation.
You can also check with Respective functional consultant whether he has done with required customization in NACE..?
One more thing you can do is,
open a program RSNAST00 and put break point at " PERFORM (tnapr-ronam) IN PROGRAM (tnapr-pgnam) USING returncode", here you can check at runtime ( While in debugging mode) the value of field TNAPR-FONAM, this value must be your SmartForm. If it is not the case then, there is problem with NACE settings and contact your functional counterpart.
Hope it's helpful .......Enjoy.
Regards,
Chetan

TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG

Is it still the case that the Muse CC Forms widget will not work properly unless you have Business Catalyst?

I am looking into options for our next office website redesign. We will definitely need a forms function. I downloaded the Muse CC free trial and went through all of the tutorials. The video on the forms (Contact Form) stated that the forms widget would not work or would not work properly if you do not have Business Catalyst. I'm hoping that has changed since the video was created.
Is this still true that you need to purchase the Business Catalyst product for Muse CC form widgets to work correcty???

Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application? You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Minus and - not working in query

Hi all,
I am operating on 10G R/2.
I have thsi query where thi sstatement <pre>(COUNT(W_O) - COUNT(W_I))</pre> TOTAL is returning 0.Why is the minus and '-' not working out in this query?.
<Pre>
SELECT
TRUNC(DT) week_start ,
next_day (TRUNC( DT) - 7, 'Sunday' ) + 6 week_end ,
to_number(to_char(DT,'FMWW'))wk_no ,
'I_'||W_I AS IO ,
COUNT(W_I) TOTAL
FROM TABLE_A
WHERE W_I IS NOT NULL
GROUP BY TRUNC(DT),
next_day (TRUNC( DT) - 7, 'Sunday' ) + 6,
to_number(to_char(DT,'FMWW')),
'I_'||W_I
UNION ALL
SELECT
TRUNC(DT) week_start ,
next_day (TRUNC( DT) - 7, 'Saturday' ) + 6 week_end ,
to_number(to_char(DT,'FMWW'))wk_no ,
'O_'||W_O AS IO,
(COUNT(W_O) - COUNT(W_I)) TOTAL
FROM TABLE_A
WHERE W_O IS NOT NULL
GROUP BY
TRUNC(DT),
to_number(to_char(DT,'FMWW')), 'O_'||W_O
</pre>
Edited by: CrackerJack on Jun 14, 2011 8:06 PM

basic maths
SQL> select count(object_name), count(owner), count(object_name) - count(owner)
2 from all_objects;
COUNT(OBJECT_NAME) COUNT(OWNER) COUNT(OBJECT_NAME)-COUNT(OWNER)
52658 52658 0
1 row selected.if you take away a number from itself you will get zero. I think you may mean SUM() rather than COUNT()

HT1766 # is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link

I own a iPhone and I have in ÇáÇí Cloud account, but has been disabled worked ريستور and what worked device device is linked to the account books first and I am I do not know the account and password and wrote activation iphone and I am ready to prove tha

I own a iPhone and I have in ÇáÇí Cloud account, but has been disabled worked ريستور and what worked device device is linked to the account books first and I am I do not know the account and password and wrote activation iphone and I am ready to prove that this device is not stolen any way you want

Apple does not participate in these forums. We're only users like you.

Forms: working and not working. A serendipity question?

Similar Messages

Maybe you are looking for