Forms10g is not running, giving this error
Hi , i want to run my form in 10g but its not running giving the following error. i starts oc4j and also given the forms path and working directory in the formsweb.cfg .
Network Error (tcp_error)
A communication error occurred: "Connection refused"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
For assistance, contact your network support team.
You don't need to worry about the port number if running from the forms builder directly.
Let me tell you how it worked with me:
I installed oracle developer suite normally.
Then I edited the registry:
start--> Run --> regedit
1-forms_path : add the path in which you placed your fmb.
2-Add a new entry ORACLE_PATH and in this one also add the path.
Run the form from the forms builder directly
Regards
AK
Similar Messages
-
"qmasterd not running" - how this happened and what we did to fix it.
For this with the message "qmasterd not running".
This may be of help to those of you who are unsuccessful in
• initialising qmasterd
• can't sucessfully 'START' qmaster from the system preferences panel
• can't start qmasterd from the shell or the startupitems
• can't establish a cluster in qmasteradmin.app
• etc etc
Taste will vary ofcourse.
SOLUTION: after 2 days of concentrated troubleshooting on this we REINITIALISED the startup disk and RE_INSTALLED THE 10.4.8 O/S and all the applications and replaced (copied) the user data on the primary startup disk.
Affected H/W:
• g5 QUAD w/8GB memory and 3.7TB disk (including 2 x 250SATA internal DDMs) with 7800graphic card
• 30inches HD Cinema display
HIstory:
• decided to UPGRADE internal 2 x 250GB SATA1 DDM's with 2 x 500GB sATA2 DDMS because of storage shortage.
• on advice, we used APPLE MIGRATION ASSITANT to migrate 100% functional OS 10.4.8 startup disk (Macintoish HD) to external FW disk that had a fullfunctional 10.4.8 and apple pro apps as a back up. (This proved to be a very bad error of judgement - a mistake)
• all data migrated over to external disk sucessfully. System restarted on EXTERNAL DISK and tests (TTPRO) and user apps run - all is ok
• replaced G5 internal UPPER SATA1 250GB disk with new SATA2 500GB .
• using G5 startup DVD's , built and initialised OS/X 10.4.8 system on NEW G5 QUAD internal UPPER 500GB SATA2 disk as Macintosh HD.
• used Apple MIGRATION ASSISTANT to migrate all user and apps and ALL the files and objects from the working EXTERNAL disk we made earlier.
• reatrted and all looked fine. FCS, SHAKE, MOTION etc etc.. all business apps. UNTIL!..
• we could NOT get qmasterd to start - msg "qmasterd not running"
• restarted system many times.. no success.
ERROR SYMPTOMS:
• noticed sever apps were corrupted such as WACOM TABLET, LIttle SNITCH and others - these were remidied by reinstallation ... however..
• console crash reporter contained MANY dumps of qmasterd with general addressing exceptions:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x0nnnnnnn
also r31 contined the page aligned address of the exception.. and this was ALWAYS different.. so assumed a data driven (parm??) corruption.
• other symptions include that need to kill -9 (force quit) qmasterd as it would NEVER shutdown.
WHat else we did to try and fix this:
• repaired disk permissions (disk utility.app) - no luck...
• repaired qmaster files disk permissions as per http://www.kashum.com/blog/1152611689 and follwd instructions.. no luck
• removed QMASTER as per the instructions at http://docs.info.apple.com/article.html?artnum=93234 - reinstalled - NO LUCK - still dumps... ;(
• removed all the qmasterd parms hoping that would help - no luck
• used many sugesstions form these discussion, COW etc .. including disconnecting all networks... no luck
• tried out most of the suggestions including an excellent on from Richard BF at http://www.kashum.com/blog/1152611689 - a trully excellent entry for those with the issue of Unable to connect to background process' error dialog problem.
• einstalled QMASTER for SHAKE4.1 disks - no luck
• resinstalled FCS (2 hours later) - no luck
• restarted on secondary system (the external disk) and QMASTER works fine!
• reinstalled the original 250GB SATA1 - restarted form it to verify QMASTER was ok.. no dumps existed.
• reinstalled OS 10.4.8 (OS only) .. no luck
• used CARBONCOPY (CCC) to make new disk - this failed miserably .. will not use this again ever....
final outcome:
• concluded that APPLE MIGRATION ASSISTANT had somehow corrupted some objects in the SECOND GENERATION of copy) from external DISK to new internal 500GB SATA2 drive.
• threw the towel in and initialised the G5 QUAD's UPPER internal DDM (500GB SATA2) - installed a new OS to 10.4.8 + maint
• tediously installed every APP including ADOBE CS2 and the CS3 photoshop whilst I mess around calling Adobe locally for an activation code (I always need to do this I dunno why).
so a great waste of 2 days.
Summary: when QMASTER works it is terrific.. especially for rendering and transcoding... but when it doesn;t it is dreadful.
Maybe someone with expertise could shed some light on this.
cheers
W
Hong KongHI Chris, I closed it because:
• at the time + a few eeks after I posted it, I had few views of it .
• it is just a reference document to suggest the trouble shooting procedures and headaches we endured to try and rectify it in the view that others may try this path
• it is in fact old news for some who have FCS 2 now.
The 'fix" is described in the "SOLUTION" part of my post.
I agree your symptom you are having wth QMASTER is of great frustration.
I would encourage you however to perserve to get this working because wehn set up it works very well.
fwiw -
installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?
Hi - I have opened a second log with the same date and name and am now tracking down the problem.
This seems to be the problem for me: Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 -
Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714) -
Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
When i am doing PGI System giving this error message
When i am doing PGI System giving this error message
when i am posting the stockthrough t.code mb1c also i am getting this error
For document type WL, an entry is required in field Doc. Hdr Text
For document type WA, an entry is required in field Doc. Hdr Text
Message no. F5480Hi,
Enter header text or make the header text field option for the document type. It will allow you to save.
You can make the field as optional either with Transaction Variant (SHD0) or from IMG.
Regards,
Naveen. -
Transformation giving this error "Source not active"
I'm trying to create transformation and I am getting this error message "Source not active". I went in to source system (in my case it is flat file). I activated the source system again but I get the error still.
Please guide.Hi,
As others have suggested, activate the DATA SOURCE and also try to view data in your flat file . you can find this option in the last tab in the data source. if your souce is active , it will allow you to see the data, this way also you can confirm is its active or not.
You mentioend that you have activated the source system, not a data source...
Try again activating the data source, it should solve your problem.
- Jaimin -
After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
Discoverer 9iASv2: does not run, produces java errors
Hi,
I am evaluating Discoverer9ias v2 for my company. We have set up 9iAs infrastructure on a Win2K box, with the main 9ias BI and Forms on another Win2K box.
After installing everything, the disco plus demo ran fine for a few hours. After that the 9ias admin website and the demo stopped responding. A reboot of main 9ias box was required to fix this. And on the main 9ias servers admin website, the discoverer status always appears as unknown.
We added a few public connections. The last public connection I tried to define had only the databse service name in it. I was trying to find out if Disco Plus will prompt the user for a userid/password. On clicking 'Apply' I got a Java error. I don't know if the connection got created or not. Since then, Discoverer is NOT WORKING AT ALL!
The demo url produces this error:
java.lang.NullPointerException
at oracle.discoiv.session.model.Authentication.(Authentication.java:87)
at oracle.discoiv.session.model.ConnectionManager.findConnection(ConnectionManager.java:306)
at oracle.discoiv.session.model.ConnectionManager.findConnection(ConnectionManager.java:277)
at oracle.discoiv.session.model.ConnectionManager.getConnection(ConnectionManager.java:74)
at oracle.discoiv.session.model.ModelSession.openConnection(ModelSession.java:272)
at oracle.discoiv.session.model.ModelSession.openAccount(ModelSession.java:331)
at oracle.discoiv.state.LoginTransition.doTransition(LoginTransition.java:62)
at oracle.discoiv.state.StateTransition.execute(StateTransition.java:37)
at oracle.discoiv.state.StateTransition.execute(StateTransition.java:46)
at oracle.discoiv.state.DiscoState.getState(DiscoState.java:155)
at oracle.discoiv.state.DiscoState.getState(DiscoState.java:52)
at oracle.discoiv.state.StateMachine.setState(StateMachine.java:75)
at oracle.discoiv.controller.DiscovererController.setState(DiscovererController.java:236)
at oracle.discoiv.servlet.DiscovererHttpHandler.processRequest(DiscovererHttpHandler.java:101)
at oracle.discoiv.servlet.DiscoServlet.doRequest(DiscoServlet.java:314)
at oracle.discoiv.servlet.DiscoServlet.doGet(DiscoServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
at oracle.plus.servlet.Disco4iProxyServlet.doRequest(Disco4iProxyServlet.java:141)
at oracle.plus.servlet.Disco4iProxyServlet.doGet(Disco4iProxyServlet.java:68)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
9ias Restarts and reboots have not helped. The Discoverer Services Configuration page on the 9ias admin website has a 'General Discoverer' option for creating and changing connections. But, clicking on this link also produces an error, even though 'Discoverer Viewer' and 'Discoverer Portlet Provider' links seem to work fine. This is the error:
500 Internal Server Error
java.lang.NullPointerException
at oracle.disco.oem.configuration.ConnectionConfiguration.getConnection(ConnectionConfiguration.java:161)
at oracle.disco.oem.configuration.ConnectionConfiguration.GetConnections(ConnectionConfiguration.java:64)
at oracle.disco.oem.beans.GeneralBean.<init>(GeneralBean.java:98)
at oracle.disco.oem.beans.BeansFactory.getGeneralBean(BeansFactory.java:47)
at oracle.disco.oem.cabo.DiscovererPageHandler.loadGeneralPage(DiscovererPageHandler.java:610)
at oracle.disco.oem.cabo.DiscovererPageHandler.prepareData(DiscovererPageHandler.java:252)
at oracle.sysman.emSDK.eml.svlt.PageHandler.handleRequest(PageHandler.java:305)
at oracle.sysman.emSDK.eml.svlt.EMServlet.myDoGet(EMServlet.java:649)
at oracle.sysman.emSDK.eml.svlt.EMServlet.doGet(EMServlet.java:224)
at oracle.sysman.eml.app.ConsoleSN.doGet(ConsoleSN.java:71)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)A few tips creating a public connection:
1) Always use capital letters when typing a EUL name
2) Never leave blank userid or password when defining public connections.
Althought these are fixed in the up coming patch, you just need to follow the tips for the 9.0.2.39 -
ITunes will not run. Several error codes. Please help
A couple months ago I tried updating iTunes and received the error "Could not open key:
UNKNOWN\Components\69413F169B198734FA40BC8B73511DB0\108B43C0CEA676640B35306AE7D2 4051.
Verify that you have sufficient access to that key, or contact your support personnel." (take note my key is different than the one above thats just for an example.) So I read and read and finally figured out that my problem came down to permissions for that key. I changed the permissions and voila it installed properly! But now I just tried updating again because I want to get iOS5 on my iPhone4. I received the same error again, "Could not open key..." so I thought heck this is an easy fix and I changed the permissions again and this time it did not work. So then I uninstalled Quicktime, iTunes, and all other Apple software from my computer (which is running Windows 7 btw). I tried to reinstall iTunes and then it went through the install and finally comes to a screen that says "iTunes has successfully been installed on your computer." So I closed that window, restarted my computer, clicked on the iTunes icon and I get a completely different error now. This error is a two-part pop up. The first error window that pops up says:
"The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
I click OK.
Then I get:
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)"
I've tried reinstalling it again and I get the same error. I tried stuff from this thread ( https://discussions.apple.com/thread/2262389?start=0&tstart=0 ) and it doesnt seem to be working. Can someone please help me work through this. I would appreciate it very much, and please explain everything in computer-illiterate terms as I'm not the greatest with computers these days.
Thank you,
MaxOK, so iTunes opens OK in another account so it is a user specific problem.
Just to be absolutely clear, have you carried out the all the user specific steps:
Remobe plugins
Remove preference files
Recreate Library
Check for Content files with issues.
One of those steps usually solves user specific issues.
Something else that you could try is to create a new iTunes library elsewhere on your disk.
Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose or create a library. Select "Create" and create a new library somewhere way from the your music folder eg in Documents - so it is completely separate from your existing iTunes.
Does iTunes Open like this?
If so go do Edit>>Preferences>>Advanced and Un-check "Copy to iTunes Music folder when adding to library". This is to stop iTunes copying your music files when you add to you new library.
Now try adding music from your original iTunes Music folder in stages as in the "Content files with issues" section.
This approach has worked for someone else although they did not say if they stuck with their test library or if they ever found the problem with the original one. -
Why is this JSTL giving this error?
This code :
<c:set var="rssTitle" scope="page">
<rss:itemTitle feedId="example1" index="1"/>
</c:set>---
Gives this error :
description The server encountered an internal error () that prevented it from fulfilling this request.
javax.servlet.ServletException: javax/servlet/jsp/el/VariableResolver
While this code works :
<jsp:useBean id="now" class="java.util.Date" />
Date: <c:out value="${now}"/>---
What is wrong?
Thanks for any help!Hmmm...something similar happening to me.
Using sql tag libs The following works:
<c:out value="${sites.rows[0].name}" />but this causes the class not found exception for VariableResolver
<c:set var="site" value="${sites.rows[0]}" scope="session" />
<c:out value="${site.name}" />Now functionally these should be doing pretty much the same thing but the second gives an exception. I'm not convinced that this is an Aopache problem since the VariableResolver class is supposed to be in the javax.servlet.... package which is NOT something Apache get to mess with.
I've checked my jstl.jar and sure enough the class isn't there but I can't find a version of the jar file which DOES contain it. Any help anyone ?
For the completists among us;
Tomcat 4.1.24
Tlib 1.0
JSP version 1.2
Regards
KC -
I am trying to fix an outlook cal sync issue which requires me to sign into icloud. I get this error every time I try. "You cant sign in because of a server error" why do i keep getting this?
I have used the solution below to fix mine and others that have run into this issue.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in: "Netsh winsock reset" (-without the quotes-)
Hit enter, restart PC, iCloud For PC should now connect without any server errors
(This solutions will work in some instances when trying to fix errors associated when you are unable to connect to iTunes also.) -
i am running windows 7 64bit professional on an asus essentio series cm5675 i5 processor with 16gigs of ram
any reason or what is causes the update program/service to not run?Hi, here is the report generated by the Farbar Service Scanner:
Farbar Service Scanner Version: 31-05-2013 01
Ran by Owner (administrator) on 02-06-2013 at 13:50:39
Running from "C:\Users\Owner\Desktop"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo IP is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
Firewall Disabled Policy:
==================
System Restore:
============
System Restore Disabled Policy:
========================
Action Center:
============
Action Center Notification Icon =====> Unable to open HKLM\...\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A} key. The key does not exist.
Windows Update:
============
BITS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Windows Defender Disabled Policy:
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1
Other Services:
==============
Checking Start type of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ImagePath of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ServiceDll of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
File Check:
========
C:\Windows\System32\nsisvc.dll => MD5 is legit
C:\Windows\System32\drivers\nsiproxy.sys => MD5 is legit
C:\Windows\System32\dhcpcore.dll => MD5 is legit
C:\Windows\System32\drivers\afd.sys => MD5 is legit
C:\Windows\System32\drivers\tdx.sys => MD5 is legit
C:\Windows\System32\Drivers\tcpip.sys => MD5 is legit
C:\Windows\System32\dnsrslvr.dll => MD5 is legit
C:\Windows\System32\mpssvc.dll => MD5 is legit
C:\Windows\System32\bfe.dll => MD5 is legit
C:\Windows\System32\drivers\mpsdrv.sys => MD5 is legit
C:\Windows\System32\SDRSVC.dll => MD5 is legit
C:\Windows\System32\vssvc.exe => MD5 is legit
C:\Windows\System32\wscsvc.dll => MD5 is legit
C:\Windows\System32\wbem\WMIsvc.dll => MD5 is legit
C:\Windows\System32\wuaueng.dll => MD5 is legit
C:\Windows\System32\qmgr.dll => MD5 is legit
C:\Windows\System32\es.dll => MD5 is legit
C:\Windows\System32\cryptsvc.dll => MD5 is legit
C:\Program Files\Windows Defender\MpSvc.dll => MD5 is legit
C:\Windows\System32\ipnathlp.dll => MD5 is legit
C:\Windows\System32\iphlpsvc.dll => MD5 is legit
C:\Windows\System32\svchost.exe => MD5 is legit
C:\Windows\System32\rpcss.dll => MD5 is legit
**** End of log **** -
This computer not running Genuine Windows error 0x8004FE21
HELP!!
I tried different solutions that was given on similar questions as mine. But that all didn't worked for me sadly enough..
Who can help me?
Diagnostic Report (1.9.0027.0):
Windows
Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-788W3-H689G-6P6GT
Windows Product Key Hash: yr8OHoeXhbT4dc6MxGYjdAStSPY=
Windows Product ID: 00371-OEM-8992671-00008
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {DCD1265E-8DEF-4F33-92B0-7057B793F4E2}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{DCD1265E-8DEF-4F33-92B0-7057B793F4E2}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-6P6GT</PKey><PID>00371-OEM-8992671-00008</PID><PIDType>2</PIDType><SID>S-1-5-21-2559910035-1535158486-1214636800</SID><SYSTEM><Manufacturer>Hewlett-Packard</Manufacturer><Model>HP
Z230 SFF Workstation</Model></SYSTEM><BIOS><Manufacturer>Hewlett-Packard</Manufacturer><Version>L51 v01.13</Version><SMBIOSVersion major="2" minor="7"/><Date>20131018000000.000000+000</Date></BIOS><HWID>9E913107018400F4</HWID><UserLCID>0413</UserLCID><SystemLCID>0413</SystemLCID><TimeZone>West-Europa
(standaardtijd)(GMT+01:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-WKS</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Versie van Software Licensing-service: 6.1.7601.17514
Naam: Windows(R) 7, Professional edition
Beschrijving: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activerings-id: 50e329f7-a5fa-46b2-85fd-f224e5da7764
Toepassings-id55c92734-d682-4d71-983e-d6ec3f16059f
Uitgebreide PID: 00371-00178-926-700008-02-1033-7601.0000-0422011
Installatie-id001701222413279544439363369062761925684480910865586663
URL van processorcertificaat:
URL van computercertificaat:
URL van gebruikte licentie:
URL van productcodecertificaat:
Gedeeltelijke productcode: 6P6GT
Licentiestatus: licentie
Resterend aantal nieuwe Windows-activeringen: 1
Vertrouwde tijd: 12-5-2014 10:08:56
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x0000000000000001
Event Time Stamp: 5:7:2014 13:22
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\wat\watadminsvc.exe
HWID Data-->
HWID Hash Current: KgAAAAEAAAABAAEAAQABAAAAAQABAAEA6GGSABCybIRYXSLYgmCezMj2
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC HPQOEM
SLIC-WKS
FACP HPQOEM
SLIC-WKS
HPET HPQOEM
SLIC-WKS
MCFG HPQOEM
SLIC-WKS
FPDT HPQOEM
SLIC-WKS
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SLIC HPQOEM
SLIC-WKS
MSDM
HPQOEM SLIC-WKS
ASF! INTEL
HCG
TCPA APTIO4
NAPAASFNew Report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-788W3-H689G-6P6GT
Windows Product Key Hash: yr8OHoeXhbT4dc6MxGYjdAStSPY=
Windows Product ID: 00371-OEM-8992671-00008
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {DCD1265E-8DEF-4F33-92B0-7057B793F4E2}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{DCD1265E-8DEF-4F33-92B0-7057B793F4E2}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-6P6GT</PKey><PID>00371-OEM-8992671-00008</PID><PIDType>2</PIDType><SID>S-1-5-21-2559910035-1535158486-1214636800</SID><SYSTEM><Manufacturer>Hewlett-Packard</Manufacturer><Model>HP
Z230 SFF Workstation</Model></SYSTEM><BIOS><Manufacturer>Hewlett-Packard</Manufacturer><Version>L51 v01.13</Version><SMBIOSVersion major="2" minor="7"/><Date>20131018000000.000000+000</Date></BIOS><HWID>9E913107018400F4</HWID><UserLCID>0413</UserLCID><SystemLCID>0413</SystemLCID><TimeZone>West-Europa
(standaardtijd)(GMT+01:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-WKS</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Versie van Software Licensing-service: 6.1.7601.17514
Naam: Windows(R) 7, Professional edition
Beschrijving: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activerings-id: 50e329f7-a5fa-46b2-85fd-f224e5da7764
Toepassings-id55c92734-d682-4d71-983e-d6ec3f16059f
Uitgebreide PID: 00371-00178-926-700008-02-1043-7601.0000-1392014
Installatie-id001701222413279544439363369062761925684480910865586663
URL van processorcertificaat:
URL van computercertificaat:
URL van gebruikte licentie:
URL van productcodecertificaat:
Gedeeltelijke productcode: 6P6GT
Licentiestatus: licentie
Resterend aantal nieuwe Windows-activeringen: 1
Vertrouwde tijd: 19-5-2014 10:19:15
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x0000000000000001
Event Time Stamp: 5:14:2014 16:09
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\wat\watadminsvc.exe
HWID Data-->
HWID Hash Current: KgAAAAEAAAABAAEAAQABAAAAAQABAAEA6GGSABCybIRYXSLYgmCezMj2
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC HPQOEM
SLIC-WKS
FACP HPQOEM
SLIC-WKS
HPET HPQOEM
SLIC-WKS
MCFG HPQOEM
SLIC-WKS
FPDT HPQOEM
SLIC-WKS
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SSDT PmRef
Cpu0Ist
SLIC HPQOEM
SLIC-WKS
MSDM
HPQOEM SLIC-WKS
ASF! INTEL
HCG
TCPA APTIO4
NAPAASF -
Openbox will not start, gives this error...
(openbox:3300):Openbox-CRITICAL**:Failed to open the display
I have E17 installed and running well, so I don,t think it is an X server error, but I am not sure about that.
Has anyone seen anything like this with Openbox?
I am trying to to start it with
/usr/bin/openbox
I have also tried starting it from .xinitrc with
exec openboxCould you be more specific about "look in your xorg log for warning/error messages"
and here is my .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
numlockx &
exec /opt/e17/bin/enlightenment_start
#exec /usr/bin/openbox
# exec wmaker
# exec startkde
# exec icewm
# exec blackbox
# exec fluxbox
Last edited by JohnGalt (2007-02-21 13:42:39)
Maybe you are looking for
-
First connection with IC webClient
Hi, I've got a strange behaviour when I execute CRM_IC (in se80). The IE is launched automatically and after a while (short time) a second IE shows up. In the first one I've got a Interaction Center framework which is visible but with only two butto
-
IDOC to SOAP - Asynchronous message
Dear friends, We are working on IDOC-SOAP scenario using Asynchronous communication. The Receiver has SSL Authentication as well. When we are sending requests, the Adapter Engine is showing below details in the Audit log: 2009-01-13 07:11:40 Success
-
In which table does INCO2(Incoterms (Part 2) stored.
In which table does INCO2(Incoterms (Part 2) stored. One can see in po header . Incoterms (Part 2) Additional information for the primary Incoterm. Example If the primary Incoterm is, for example, FOB ("Free on Board"), then the second field provides
-
Answers & Dashboard report as an input formular?
Hi everybody, I was wondering if anyone of has experience in using an answers report placed on a dashboard as an input formular? The idea is to replace several excel spreadsheet with a standardized answers report. Could BIEE's write back capability b
-
Time dependent data load to BW using Fixed Time Interval selection
Hi, I'm facing a problem in extracting time-dependent master data to BW. I would really appreciate if anyone can help in this regard. We have a table in R/3 which has time-dependent data. For example, for a single OBJID we could have multiple records