Forms6 LOB not compatible with 9i CLOB
We have a table with some CLOB data type fields. Front-end of this table is forms60 interface. As forms60 has LOB instead of CLOB, we have selected the same for the field in form. When we try to enter data through form, LOB related data missing from database and ### appears in place of LOB data in form.
According to the matrix documentation of 11 release 1 which clearly state that 9.2.0.8 can support all as my installation
as following
databases version (9.2.1.0, 9.2.0.8, 10.2.0.4, 11.1.0.6)
Rman catalog database + Schema + Rman utility is (9.2.0.8) database
Now 11 release 2 matrix documentation says no you have to use 10.2.0.3 even oracle documents are confusing me
I have successfully registered all the database in my catalog as well run ( crosscheck archivelog all, report schema ) was functioning smoothly
when its came to the integration part to HP - Data Protector it started to through me an error ( this version of database its not compatible with recovery manager)
and what does this oracle document senario means
====================
RMAN Compatibility:
Scenario
Assume that you maintain a production databases of the following releases:
9.2.0
10.2.0
11.2.0
You want to record RMAN repository data about these databases in a single recovery catalog database. According to Table B-2, you can use a single 11.2.0 recovery catalog database with a 11.2.0 catalog schema for all target databases. Ensure that the version of the RMAN client used to back up each target database meets the following requirements:
Use the 9.2.0 RMAN executable to back up the 9.2.0 database.
Use either the 9.2.0 or 10.2.0 RMAN executable to back up the 10.2.0 database.
Use any RMAN executable to back up the 11.2.0 database.
==================================
All what i want is to achieve one single catalog for all the above mentioned oracle versions and can be integrated with HP-DP
can anyone explain this doubts and give me a best solution to achieve desire solution if not what are the altarnative ??/
thanks and sorry its quite log post
Regards
Similar Messages
-
Mail app deleted and reinstall wont open, says not compatible with OSX
i accindetally deleted my mail app and emptied the trash, when I tried to reinstall from the startup disk, it installs but wont open, saying that the version of mail is not compatible with the version of OSX (10.5.8)
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
There is no downloadable version of Mail.app - it comes with the operating system i.e. on your install disks. -
I am using a lap top, just reinstalled everything, and now have Firefox 9.1 and am being told it is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.
See:
* http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Read-Me-Before-Posting-Titanium-Hotfixes/m-p/55632 -
I downloaded Version 4 and installed it. At no point did it say that it was not compatible with the version of OS X that I am running (10.4.11) now that it is installed it will not open but it has already up graded from 3.6 so I have lost the lot. How can I download a version of 3.6 so that I can use it again or should I just pack up and use Safari as all I can get from your site is version 4. HELP!!!
Go to this link and find your language:
http://www.mozilla.com/en-US/firefox/all-older.html -
iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open. So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.
Maybe. See:
Reverting to previous version of Numbers -
I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
Another message they get is:
AutoConfigAlert:
Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
This is on Windows XPDo you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
After update to 3.6.20, ERROR, platform version 1.9.2.18 not compatible with Min/Max v 1.9.2.20
Win2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 03/22/2011. Got a msg window in FireFox stating important security update available. ''(ADDED INFO: Checked System Requirements of update and then...)'' As usual, I clicked yes load it. A few moments later I got the message: "XULRunner Error:
Platform version '1.9.2.18' is not compatible with
minVersion>=1.9.2.20
maxVersion<=1.9.2.20"
That is it, NO MORE FIREFOX!!! How can I fix it and not loose any of my 'stuff'?You're welcome
-
I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
Maybe there is a newer setup installer? But I can't find it.
[10:42:54]: Error:
:Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read returned true. so far, this is OM DB, not an empty DB
[10:42:54]: Debug:
:Connection was not open. We will try to open it.
[10:42:54]: Debug:
:SqlConnectionReady returned True.
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read did not return true. The MG is missing. This is not OM DB
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Always:
:Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.Never mind, found it!
Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
CLR Types for Microsoft® SQL Server® 2012 and now it works!! -
This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
What is this about and how can I retsore access to Firefox on my pc?If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari
How to Downgrade OS X Yosemite Back to OS X Mavericks
-
I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.
Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13 -
Cannot install Logic from DVD version 9.0.0. because it is not compatible with the latest OS 10.8.3
As I tried to install Logic 9.0.0 the OS comes out with a message saying that the OS is not compatible with this version of Logic.
I have Logic conventional DVD Software package.
How can I get this done?
Any help, I appreciate!
Thanks!No, the message prevents me from installing.
Now, I took the App Icon from my Laptop which has the latest Logic Update installed and throw it in my new iMac's Application Folder. It seems to work OK.
What I havent installed are the Additional Content and all the DVDs that come with Logic. -
I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.Go to the menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience. -
Photoshop CS2: "file not compatible with this version of Photoshop" error
So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
OS: OSX 10.4.11
Photoshop CS2
Info:
Kind: Adobe Photoshop file
Size: 394.4MB
Created: December 13, 2007
Modified: Yesterday at 3:54 PMThis is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost. -
need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?
Maybe you are looking for
-
I have both the latest Firefox 3.6.12 and Adobe Flash. Firefox will freeze up for no apparent reason. It's most commonly happened when there's a box that needs text information adding into it (like the comments box on Facebook pages) or when a smalle
-
Hi Guys, I have been looking at the use of Cisco ACS server for VLAN assignment. So far I have searched through a number of threads and no found what I am looking for specifically so here it goes. 1) When the RADIUS attributes have been configured in
-
New computer - what about iTunes?
I have a new computer (iMac) and used a windows based computer before. That computer no longer works, but what to do with iTunes and my iPhone on the new computer? I do not want to loose everything I have on the iPhone when I connect my iPhone to the
-
I thought I understood how Captivate (3 or 4) handles recording audio, but now I'm not sure. I always thought I should set the audio settings as high as possible when I record my audio in Captivate (so I'd have good quality audio), then change the a
-
# at the end of the file in application server
Hello All, While uploading data from text file into application sever through transaction CG3Z I am getting # at the end of each line in the file that is uploaded in application server.Please let me know how to eliminate this # symbol. Thanks, Rakesh