Forms9i: Cannot open Oracle*Terminal file: fmrweb.

Hi there,
Anyone who knows what to do about the error message "Cannot open Oracle*Terminal file: fmrweb" when trying to compile and run a form in Forms9i ?? I have found a few files named fmrweb*.* in the D:\OraHome\Forms90 directory. What can I do ???
Thanks for your help.
Cheers ...Jesper ( [email protected] )

hi jesper,
U must have been working with forms either design or run mode.
U have to close the application before oracle terminal can be effective.
restart forms desgin/run mode after u have registered the changes made in the oracle terminal file.
(resp. *.res)

Similar Messages

Error Opening Oracle Terminal File fmrweb.

I installed 9IAS portal and the forms/reports server. The portal works fine, but when I try the 'Run Form Web ( runform.htm)' I get an error "Error opening Oracle*Terminal file fmrweb." The file does exist in my c:\oracle\806\forms60 directory and my FORMS60_PATH is set to c:\oracle\806\forms60 as well. Anybody having ( had ) similar problems? Note: 8.1.7, portal, and formsserver installed on the same Win 2000 machine. No Oracle apps. Thanks in advance.

Hi Christian,
It's probably working because you're now using fmrweb.res instead of the foobar fmrwebdk.res. Just look out for that missing quotation mark :)
--Jesper

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open shared object file: on Informatica Power Centre Installation

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Libclnysh.so.1.0 : cannot open shared object file..

Hi,
I was running Oracle for linux successfuly for about 2 weeks
now.. until from yesterday, I am starting to recieve the
following error when i run svrmgrl
libclnysh.so.1.0 : cannot open shared object file : No such file
or directory
But, however svrmgrlO works..
I tried to do a 'genclntsh ' but it gave me the following error..
ld: cannot open -lnsl: No such file or directory
I am using
-SuSE 5.2
-Kernel 2.0.36 ..
-patch for glibc installed
Memory 64 MB
I just cant understand why it started giving this problem after
all this time it worked fine.. what could have gone wrong?
HELP !!
Shibu Basheer
null

Shibu Basheer (guest) wrote:
: ld: cannot open -lnsl: No such file or directory
: I am using
: -SuSE 5.2
: -Kernel 2.0.36 ..
: -patch for glibc installed
: Memory 64 MB
See LD_LIBRARY_PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export LD_LIBRARY_PATH
: I just cant understand why it started giving this problem after
: all this time it worked fine.. what could have gone wrong?
: HELP !!
: Shibu Basheer
null

Linux - libnqwebibotapi.so Cannot open shared object file

BI is running on my Linux box (Redhat). I have configured and started BI Scheduler. It starts without an issue.
When I create an iBot to be delivered immediately I get the error:
libnqwebibotapi.so: cannot open shared object file: No such file or directory [nQSError: 77002] Could not load iBot library libnqwebibotapi.so.
My LD_LIBRARY_PATH is pointing to the location of the file: /opt/oracle/oraclebi/web/bin
declare -x LD_LIBRARY_PATH="/opt/oracle/11.2.0/client_1/lib:/opt/oracle/oraclebi/server/Bin:/opt/oracle/oraclebi/web/bin"
Any ideas? I am not sure what step I am missing.
Thanks!
Eric

Can you post the full error log from Delivers please
You've not told us OS, versions, etc
http://catb.org/~esr/faqs/smart-questions.html#beprecise

Libsqlplus.so: cannot open shared object file

After oracle-instantclient-sqlplus-10.1.0.3-1 rpm install on Red Hat, running sql plus gives:
sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
The fix is to include in the sqlplus rpm the file
/etc/ld.so.conf.d/oracle-instantclient.conf
which would contain this line:
/usr/lib/oracle/10.1.0.3/client/lib/
Also run ldconfig in post-install script.
Thanks.

Alternatively you can set LD_LIBRARY_PATH as mentioned
in the notes:
http://www.oracle.com/technology/docs/tech/sql_plus/10103/readme_ic.htm
This is more flexibile than using ld.so.conf if you have
another version of Oracle or the Instant Client installed.
-- CJ

Libdb-4.3.so: cannot open shared object file: No such file or dii rectory

Hi Experts... I am a new to Oracle APPS trying to install Ebusiness suite in oracle enterprise linux ver 6,1 using oracle virtualbox.. and I am stuck with libdb-4.3.so for last 3 days.. searched google and bing, not able to find any information.
Could you please help me..
$ADMIN_SCRIPTS_HOME/adapcctl.sh start
/home/oracle/ebs/inst/apps/VIS_localhost/ora/10.1.3/Apache/Apache/bin/apachectl stt
artssl: execing httpd
/home/oracle/ebs/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading
shared libraries: libdb-4.3.so: cannot open shared object file: No such file or dii
rectory
11/12/26 00:10:25 Start process
/home/oracle/ebs/inst/apps/VIS_localhost/ora/10.1.3/Apache/Apache/bin/apachectl stt
artssl: execing httpd
/home/oracle/ebs/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading
shared libraries: libdb-4.3.so: wrong ELF class: ELFCLASS64
getting bellow error.
/home/oracle/ebs/inst/apps/VIS_localhost/ora/10.1.3/Apache/Apache/bin/apachectl stt
artssl: execing httpd
/home/oracle/ebs/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading
shared libraries: libdb-4.3.so: cannot open shared object file: No such file or dii
rectory
I started httpd from /home/oracle/ebs/apps/tech_st/10.1.3/Apache/Apache/bin/ by using service httpd start and then run $ADMIN_SCRIPTS_HOME/adapcctl.sh start got bellow message
11/12/26 00:10:25 Start process
/home/oracle/ebs/inst/apps/VIS_localhost/ora/10.1.3/Apache/Apache/bin/apachectl stt
artssl: execing httpd
/home/oracle/ebs/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading
shared libraries: libdb-4.3.so: wrong ELF class: ELFCLASS64
Not able to figure it out the file libdb-4.3.so issue.
Here is the...
IDD for httpd... not sure, why it has two folderss.. one with 10.1.3 and another one with 10.1.2..
[root@localhost appl]# ldd /home/oracle/ebs/apps/tech_st/10.1.3/Apache/Apache/bin/httpd
linux-gate.so.1 => (0xf7795000)
libdms2.so => not found
libdl.so.2 => /lib/libdl.so.2 (0x49c7b000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0xf7742000)
libpthread.so.0 => /lib/libpthread.so.0 (0xf7727000)
libdb.so.2 => /usr/lib/libdb.so.2 (0xf7724000)
libm.so.6 => /lib/libm.so.6 (0x49c09000)
libc.so.6 => /lib/libc.so.6 (0x4d737000)
/lib/ld-linux.so.2 (0x4d715000)
libfreebl3.so => /lib/libfreebl3.so (0xf76d7000)
libdb-4.3.so => not found
[root@localhost appl]# ldd /home/oracle/ebs/apps/tech_st/10.1.2/Apache/Apache/bin/httpd
linux-gate.so.1 => (0xf7704000)
libdms2.so => not found
libpthread.so.0 => /lib/libpthread.so.0 (0xf76c6000)
libnsl.so.1 => /lib/libnsl.so.1 (0xf76ac000)
libm.so.6 => /lib/libm.so.6 (0x49c09000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0xf767b000)
libdl.so.2 => /lib/libdl.so.2 (0x49c7b000)
libdb.so.2 => /usr/lib/libdb.so.2 (0xf7679000)
libc.so.6 => /lib/libc.so.6 (0x4d737000)
/lib/ld-linux.so.2 (0x4d715000)
libfreebl3.so => /lib/libfreebl3.so (0xf762c000)
libdb-4.3.so => not found
[root@localhost appl]# find / -type f | grep -i "libdb"
/lib64/libdb_cxx-4.3.so
/lib64/libdb_cxx-4.2.so
/lib64/libdbus-1.so.3.4.0
/lib64/libdb-4.3.sobackup
/lib64/libdb-4.2.so
/lib64/libdb-4.7.so
/home/backup/startCD/Disk1/rapidwiz/jre/IBM_AIX/1.6.0/lib/ppc/libdbx_j9.so
/home/oracle/Downloads/6078836/libdb.so.2
/home/oracle/ebs/apps/tech_st/10.1.2/rdbms/lib/libdbtools10.a
/home/oracle/ebs/apps/tech_st/10.1.2/.patch_storage/7379122/rdbms/lib/impdta.o_libdbtools10.a_pre_7379122
/home/oracle/ebs/apps/tech_st/10.1.2/.patch_storage/7379122/rdbms/lib/impdrv.o_libdbtools10.a_pre_7379122
/home/oracle/ebs/apps/tech_st/10.1.2/inventory/filemap/rdbms/lib/libdbtools10.a/files.map
/home/oracle/ebs/apps/apps_st/appl/gl/12.0.0/patch/115/sql/glibdbts.pls
/home/oracle/ebs/apps/apps_st/appl/gl/12.0.0/patch/115/sql/glibdbtb.pls
/home/oracle/ebs/apps/apps_st/appl/msd/12.0.0/patch/115/sql/MSDRETLIBDBNAME.sql
/home/oracle/ebs/apps/apps_st/appl/msd/12.0.0/patch/115/sql/MSDNEWLIBDB.sql
/home/oracle/ebs/db/tech_st/11.1.0/rdbms/lib32/libdbtools11.a
/home/oracle/ebs/db/tech_st/11.1.0/rdbms/lib/libdbtools11.a
/home/oracle/ebs/db/tech_st/11.1.0/srvm/lib/libdbcfg11.a
/home/oracle/ebs/db/tech_st/11.1.0/lib32/libdbcfg11.so
/home/oracle/ebs/db/tech_st/11.1.0/lib/libdbcfg11.so
/usr/lib64/xulrunner-1.9.2/components/libdbusservice.so
/usr/lib64/compiz/libdbus.so
/usr/lib64/libdbus-c++-1.so.0.0.0
/usr/lib64/libdbus-glib-1.so.2.1.0
/usr/lib64/libdb_cxx-4.7.so
/usr/lib64/xorg/modules/extensions/libdbe.so
/usr/lib64/libdbus-qt-1.so.1.0.0
/usr/share/doc/rsyslog-4.6.2/omlibdbi.html
/usr/lib/libdb.so.2
/root/rpmbuild/SOURCES/libdbi-drivers-0.8.3.tar.gz
/root/rpmbuild/SOURCES/libdbi-0.8.3.tar.gz
/root/rpmbuild/SOURCES/libdbi-drivers-error-handler.patch
/root/rpmbuild/SOURCES/libdbi-drivers-cflags.patch
/root/rpmbuild/SOURCES/libdbi-cflags.patch
/root/rpmbuild/SPECS/libdbi-drivers.spec
/root/rpmbuild/SPECS/libdbi.spec
find: `/proc/5275/task/5275/fd/5': No such file or directory
find: `/proc/5275/task/5275/fdinfo/5': No such file or directory
find: `/proc/5275/fd/5': No such file or directory
find: `/proc/5275/fdinfo/5': No such file or directory
/lib/libdbus-1.so.3.4.0
[root@localhost appl]#
[root@localhost lib]# ls -ltr libdb* from /usr/lib
-rwxr-xr-x. 1 root root 5825 Dec 25 12:06 libdb.so.2
[root@localhost lib64]# ls -ltr libdb* /usr/lib64
-rwxr-xr-x. 1 root root 195696 Apr 28 2010 libdbus-c++-1.so.0.0.0
-rwxr-xr-x. 1 root root 71136 Jul 3 2010 libdbus-qt-1.so.1.0.0
-rwxr-xr-x. 1 root root 1647120 Jul 22 2010 libdb_cxx-4.7.so
-rwxr-xr-x. 1 root root 144960 Nov 19 2010 libdbus-glib-1.so.2.1.0
lrwxrwxrwx. 1 root root 24 Dec 14 22:45 libdb-4.7.so -> ../../lib64/libdb-4.7.so
lrwxrwxrwx. 1 root root 23 Dec 14 22:46 libdbus-glib-1.so.2 -> libdbus-glib-1.so.2.1.0
lrwxrwxrwx. 1 root root 23 Dec 14 22:47 libdbus-glib-1.so -> libdbus-glib-1.so.2.1.0
lrwxrwxrwx. 1 root root 22 Dec 14 22:50 libdbus-c++-1.so.0 -> libdbus-c++-1.so.0.0.0
lrwxrwxrwx. 1 root root 21 Dec 14 22:50 libdbus-qt-1.so.1 -> libdbus-qt-1.so.1.0.0
lrwxrwxrwx. 1 root root 24 Dec 14 23:07 libdb.so -> ../../lib64/libdb-4.7.so
lrwxrwxrwx. 1 root root 16 Dec 14 23:07 libdb_cxx.so -> libdb_cxx-4.7.so
[root@localhost lib]# ls -ltr libdb* from /lib
-rwxr-xr-x. 1 root root 284764 Mar 22 2011 libdbus-1.so.3.4.0
lrwxrwxrwx. 1 root root 18 Dec 18 00:39 libdbus-1.so.3 -> libdbus-1.so.3.4.0
lrwxrwxrwx. 1 root root 17 Dec 25 01:40 libdb-3.3.so -> /lib/libdb-4.3.so
[root@localhost lib64]# ls -ltr libdb* from /lib64
-rwxr-xr-x. 1 root root 1139224 Jul 22 2010 libdb_cxx-4.3.so
-rwxr-xr-x. 1 root root 1055864 Jul 22 2010 libdb_cxx-4.2.so
-rwxr-xr-x. 1 root root 976976 Jul 22 2010 libdb-4.2.so
-rwxr-xr-x. 1 root root 1526952 Jul 22 2010 libdb-4.7.so
-rwxr-xr-x. 1 root root 268200 Mar 22 2011 libdbus-1.so.3.4.0
lrwxrwxrwx. 1 root root 18 Dec 14 22:45 libdbus-1.so.3 -> libdbus-1.so.3.4.0
lrwxrwxrwx. 1 root root 18 Dec 14 22:46 libdbus-1.so -> libdbus-1.so.3.4.0
-rwxr-xr-x. 1 root root 1043696 Dec 25 12:04 libdb-4.3.sobackup
lrwxrwxrwx 1 root root 18 Dec 25 23:16 libdb-4.3.so -> libdb-4.3.sobackup
Any one help me, what I am missing from above.. and also, my post installation rapidwizard is cancelled, so Do I need to install from scratch? or If I fix this issue, can i access the application using web url?
Edited by: user1254389 on Dec 25, 2011 10:06 PM
Edited by: user1254389 on Dec 25, 2011 10:10 PM

Hi Experts... I am a new to Oracle APPS trying to install Ebusiness suite in oracle enterprise linux ver 6,1 using oracle virtualbox.. and I am stuck with libdb-4.3.so for last 3 days.. searched google and bing, not able to find any information.Oracle EBS R12 is not certified yet with Linux 6 so please install a supported OS (see the docs before for the list) or check the certification matrix and try the installation then.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Thanks,
Hussein

[sovled] gnome3.12 locale issue, cannot open gnome-terminal

I update gnome from 3.10 to 3.12, everything works fine except that I cannot open gnome-terminal, the error message shows
(process:2410): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.gnome.Terminal exited with status 1.
The other problem is that I cannot start fcitx(I use it to input chinese) either, there is somethings wrong in my locale, when I type 'locale ' it shows
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_US-UTF-8
LC_CTYPE=en_US-UTF-8
LC_NUMERIC="en_US-UTF-8"
LC_TIME="en_US-UTF-8"
LC_COLLATE=C
LC_MONETARY="en_US-UTF-8"
LC_MESSAGES="en_US-UTF-8"
LC_PAPER="en_US-UTF-8"
LC_NAME="en_US-UTF-8"
LC_ADDRESS="en_US-UTF-8"
LC_TELEPHONE="en_US-UTF-8"
LC_MEASUREMENT="en_US-UTF-8"
LC_IDENTIFICATION="en_US-UTF-8"
LC_ALL=
I try to reinstall the glibc or regenerate the locale-gen, but none of them solve the problem, so can anyone help me? thanks.
Last edited by wntyygtwxf (2014-04-11 10:25:48)

I have resolved this issue. The reason I guess is also "locale"
"$localectl" output "System Locale: n/a" and I check the /etc/locale.conf I found this file is lost.
So after I press below command and reboot the machine, gnome-terminal could be started.
# localectl set-locale LANG="en_US.UTF-8"
Thanks all!
gogoer wrote:
I don't meet C locale error message after I exec gnome-terminal. Although that, I post below output.
~ locale -a
C
en_US
en_US.iso88591
en_US.utf8
POSIX
zh_CN
zh_CN.gb18030
zh_CN.gb2312
zh_CN.gbk
zh_CN.utf8
~ localectl
System Locale: n/a
VC Keymap: n/a
X11 Layout: n/a
clfarron4 wrote:@gogoer, did you also get a message about the C locale, or is this an unrelated issue (in which you need to start a new thread)?

Libstdc++-libc6.1-1.so.2: cannot open shared object file

When I try to install Oracle 9i on OEL 5 I get:
#./runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2009-01-05_03-05-57PM/jre/bin/java. Please wait...
/tmp/OraInstall2009-01-05_03-05-57PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
Although:
#rpm -qi libstdc++
Name : libstdc++ Relocations: (not relocatable)
Version : 4.1.2 Vendor: Oracle USA
Release : 42.el5 Build Date: Sun 25 May 2008 11:14:02 AM EEST
Install Date: Sat 03 Jan 2009 03:15:57 AM EET Build Host: ca-build15.us.oracle.com
Group : System Environment/Libraries Source RPM: gcc-4.1.2-42.el5.src.rpm
Size : 925520 License: GPL
Signature : DSA/SHA1, Mon 26 May 2008 08:58:57 AM EEST, Key ID 66ced3de1e5e0159
URL : http://gcc.gnu.org
Summary : GNU Standard C++ Library
Description :
The libstdc++ package contains a rewritten standard compliant GCC Standard
C++ Library.
What's the problem?

Hi Valentin
It is very typical that a Library is not found by the OUI when an installation is going to be done. Basically there are 2 typic causes.
The first is that the library is not in your OS and the another one is that the library is in your OS but you have not set correctly the LD_LIBRARY_PATH in order to the OUI can find it. The solution is very easy:
1.- Check where is the library in your OS. It can be in:
/usr/lib or /usr/lib64 or another directory. connected as root go to / and apply this command to find where the library is:
find ./ -name libstdc*
with that command you will see where the library is. Take that path and added it to the LD_LIBRARY_PATH.
The LD_LIBRARY_PATH is an eviroment variable that must be set in the profile of the user usually.
Once done all this , reload the connection with the user with what you want to install the Oracle Software and test.
For any more information or guide replay again friend.
Joel Pérez
Oracle Ace Member
DBA Oracle

Rapidwiz error cannot open shared object file: libpthread.so.0 libc.so.6

Hi,
We are following Note 238276.1 Migrating to Linux with Oracle Applications Release 11i, trying to install the technology stack (Section 2: Step 4), in a RHEL5 64Bits.
We have downloaded the startCD (B29029-01) and the TechStack CDs (B29032-01_2of2). When running the ./rapidwiz from startCD, we get following error:
/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
chmod: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
More info:
[applmgr@desaebs rapidwiz]$ ldd '/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre'
linux-gate.so.1 => (0xffffe000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00bed000)
libdl.so.2 => /lib/libdl.so.2 (0x00be7000)
libc.so.6 => /lib/libc.so.6 (0x00a9f000)
/lib/ld-linux.so.2 (0x00a81000)
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libpthread.so.0
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libc.so.6
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libdl.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/ld-linux.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ locate linux-gate.so.1
It seems that linux-gate.so.1 is not present, I'll try to install it, but I'm not sure this can be the real problem.
Any idea?
Thanks!
Alvaro

Yes, thats correct ...
The actual situation is:
-Customer has split configuration: DB 11g in RHEL5x86-64Bits + APPS 11.5.10.2 in Windows2003
-The target is to have all DB11g and APPS R12 in single node RHEL5x86-64Bits
We're following Note "Migrating to Linux with Oracle Applications Release 11i [ID 238276.1]" to migrate the APPS server from Windows to Linux, as a middle/temporary step prior to make the Migration to R12.
We are trying to do it, but we get errors during Section 2.4 "Install the Middle Tier Technology Stack", running the rapidwiz command we get errors, because of R11i is not supported in 64bits platforms (Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1])
Our bigest doubt now is that we are trying to install 11i techstack into RHEL5 x86-64bits, and we think this is not possible, because of R11i is not supported in 64bits platforms !!!
That is, could we migrate the APPS server from Windows to Linux x86-64 as a temporary step to begin the upgrate to R12 all in RHEL5x86-84bits, that is full supported on this 64bit platform?
What possibilities do we have if we can't do this?
Theese can be some of them:
1-Migrate apps server from actual windows2003 to Linux 32bit, in other host with 32 bits installed, instead of 64bits, and move here from windows to lilnux 32bits, and the begin the R12migration
2-Migrate to R12 into actual appserver Windows2003 and then migrate appserver from windows to rhel5-64bits
I don't like second option, because we want to make the R12 upgrade into Linux, not in windows. We need to eliminate windows platform as soon as we can.
Thanks in advance ,

Libclntsh.so.10.1: cannot open shared object file: No such file or director

Hi,
I am getting this error when I am running a report in OBIEE. I can login to the .rpd but when I run a request, I am getting:
libclntsh.so.10.1: cannot open shared object file: No such file or directory
[nQSError: 46029] Failed to load the DLL /obieesbos1/obi/OBIEE/OracleBI/server/Bin/libnqsdbgatewayoci10g.so. Check if 'Oracle OCI 10G' database client is installed.
But I can ping to the tnsnames on this server using sqlplus. The envionment is on Linux. Any suggestions?

yes, in fact I have an Oracle Consultant looking into the issue since three days but of no helpl
I can connect to the source database using sqlplus on this machine and can run a query. But OBI is throwing error.
Not sure what else is missing. Any suggestions?
Here is the user.sh
# Oracle Parameters
# Make sure that Oracle DB 32 bit Client is installed
ORACLE_HOME==/obieesbos1/obi/oracle/product/10.2.0/db_1
export ORACLE_HOME
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
export PATH
#LD_LIBRARY_PATH=$OracleBI_HOME/server/Bin:$LD_LIBRARY_PATH
#export LD_LIBRARY_PATH
#LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
#export LD_LIBRARY_PATH
# If you have Linux 64 bit Platform, and would like to run Oracle BI 32 bit
# then you must install Oracle DB 64 bit client, and this client comes with
# 32 bit libraries under $ORACLE_HOME/lib32. The LD_LIBRARY_PATH in this case
# shall be like this:
LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH

Libclntsh.so.10.1: cannot open shared object file

Running Redhat EL5.5 with php5.3.13
Installed Oracle instant client basic, sqlplus, and devel 11.2.0.3.0-1
edited .bashrc to include
export ORACLE_HOME=/usr/lib/oracle/11.2/client
export LD_LIBRARY_PATH=/usr/lib/oracle/11.2/client/lib
export TNS_ADMIN=/usr/include/oracle/11.2
pecl install oci8
restarted
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/oci8.so' - libclntsh.so.10.1: cannot open shared object file: No such file or directory in Unknown on line 0
Why is it looking for libclntsh.so.10.1?
php -i
ENV["LDLIBRARY_PATH"] => /usr/lib/oracle/11.2/client/lib
_ENV["TNS_ADMIN"] => /usr/include/oracle/11.2
_ENV["ORACLE_HOME"] => /usr/lib/oracle/11.2/client
I checked ld.so.conf and ld.so.conf.d and nothing mentions oracle at all.
sqlplus works just fine so the oracle install appears good, just not loading in php right.

By restart I meant the whole server so that the environmental variables are set in .bashrc, etc.
from phpinfo() Apache Environment includes:
TNS_ADMIN     /usr/include/oracle/11.2
LD_LIBRARY_PATH     /usr/lib/oracle/11.2/client/lib
PHP variables include:
SERVER["TNSADMIN"]     /usr/include/oracle/11.2
_SERVER["LD_LIBRARY_PATH"]     /usr/lib/oracle/11.2/client/lib
So it doesn't look like I need to explicitly state them again in /etc/sysconfig/httpd
Why is it looking for liblntsh.so.10.1 instead of the installed 11.1 in /usr/lib/oracle/11.2/client/lib?

Ubuntu - libocijdbc11.so: libaio.so.1: cannot open shared object file.

I was trying to fix the "no ocijdbc11 in java.library.path" error, which has been discussed previously.
Re: Test failed - no ocijdbc11 in java.library.path
no ocijdbc11 in java.library.path
ERROR-No ocijdbc11 in java.library.path - Vendor code 0 >>Can you help?
Connect fails w/ ocijdbc11.dll not found
As I understand, the general advice was that you needed to set your ORACLE_HOME variable, which I did in the shell script that starts sql developer:
sqldeveloper.sh
#!/bin/bash
ORACLE_HOME=/opt/oracle/instantclient/
export ORACLE_HOME
The file which it had been complaining about is in that folder, and it seems to find it, but now I get an error "libocijdbc11.so: libaio.so.1: cannot open shared object file."
Where can I get this libaio.so file?
Or am I going about this wrong?
(I have seen other people talking about a file ".tnsnames.ora". Not clear to me how that is related, but I don't have that file. http://mikesmithers.wordpress.com/2010/01/03/solved-%E2%80%93-the-mystery-of-sqldeveloper-and-the-missing-ocijdbc11/)

I'm on Windows, but do mind you need a 11.2 client as home. Alternatively try setting the home to your sqldev installation folder.
Hope that helps,
K.

Forms9i: Cannot open Oracle*Terminal file: fmrweb.

Similar Messages

Maybe you are looking for