FormsCentral Alternatives - Comparison Matrix :: Features and Pricing

I've started looking at alternatives to replace FormsCentral. The process will involve some research.
I'm planning to create a spreadsheet comparing features and pricing.
Has anyone already done this?
I expect many will benefit from this effort, so I will share a comparison analysis matrix when I have something meaningful.
So far, alternatives include more than Adobe mentions in their knowledgebase article.
Here's my list I have so far:
https://www.zoho.com/creator/features.html
http://www.google.com/forms/about/ Google Forms terms of service may not permit collection of PII. Form and data may be removed without notice by a bot???
https://www.surveymonkey.com/pricing/
http://www.jotform.com/pricing
https://www.formstack.com/pricing - Formstack has a forms importer that can ingest Adobe ForsCentral URLs. https://www.formstack.com/features/form-importer

Thanks for sharing the pricing comparisons, DTBartholomew. Director of Communications at JotForm, here.
One of the great things about JotForm is that it's completely free for up to 100 submissions per month, and only goes up to $9.95 after that.
Adobe was kind enough to refer their users to JotForm because it's simply one of the easiest options out there. Check out how to seamlessly import your FormsCentral forms to JotForm here. Also feel free to review a blog we posted about making the switch easier. We're incredibly grateful Adobe took the time to mention us, and we're excited to welcome all of our new users!
Of course, there are many reasons to want to use JotForm that go beyond the fact that we're more economical and easier to use than other form builders. Below are a few other exciting features.
Key Features with JotForm:
Completely free for fewer than 100 submissions per month
The most advanced Form Designer (like nothing you've seen -- seriously, try this thing!)
A Theme Store that features something for everyone
Includes skip logic
Hopefully this provides a little more insight into an easy transition from FormsCentral. I encourage anyone to reach out if you have any additional questions!

Similar Messages

Visual Studio Online- Features and pricing.

I am TFS Admin in my organization and we(approx 100 users) have Visual Studio Professional
with MSDN subscription and i want to know about following things:
1. Is Visual Studio Online free for me(as we have MSDN Professional license)?
2. How much storage(on cloud) we can get with this subscription ,as we have thousands
of applications to store?
3. What are the features available for me with my current(Visual
Studio Professional with MSDN) subscription.
4. is there any other cost or pricing which i will have to pay in order to use Visual
Studio Online?
5. Authorization
migration from existing project : If we migrating from an On-Premises Team Foundation Server to Team Foundation Service:
1. IS source code history preserved
2. Are we able to migrate WorkItems with history.
6. SharePoint Integration with Team Foundation Service: Does
hosted team foundation service support integrate with SharePoint.

I have Visual Studio Professional with MSDN subscription and i want to know about following
things:
1. Is Visual Studio Online free for me?
2. How much storage we get with this subscription?
3. What are the features available for me with my current(Visual
Studio Professional with MSDN) subscription.
4. is there any other cost or pricing which i will have to pay in order to use Visual
Studio Online?

Comparison Matrix for Logic Express and Logic Pro?

I have looked everywhere for a chart that compares the features between these two products and can't find one.
I am thinking of moving up from Garageband, and leaning toward Logic Express right now.
Is there a comparison matrix somewhere?
Thanks,
Kirk

I don't think so, but you can go to their respective Specs in Apple web-site and make one yourself.
Basically, LE is the same thing as Logic Pro, but with less instrument/effects plugins and less audio/instrument loops content. Also, Logic Studio package has additional tools like Mainstage/Soundtrack Pro, which you may not need.
As a sequencer and 3rd party plugin host LE is as powerful as Logic Pro.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Questions about CIN tax procedure choice and pricing schemas

Hi all,
I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I would to understand better which are on behalf of one choice or another.
b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport, etc.).
Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
Thanks in advance
Gianpaolo

hi,
this is to inform you that,
a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
CIN - TAXINN and TAXINJ
b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
b.b. you can create your own pricing procedure for this and go ahead.
hope this clears your issue.
balajia

Tax and pricing procedure

hi sapers
what is meanning of requirement and alternating condition base value in pricing and tax procedure.thanks

hi,
this used for SD/MM
Requirement:
It is a routine that is written by an ABAP consultant according to the business requirement.
By defining Requirement in condition technique we can restrict the access of condition type.
To understand the concept, we will take the example of the Rebates. Rebates are to be included during the billing document processing and not in the sales document processing. As rebates are given on the delivered quantity and not on the ordered quantity (in case of cut-off period for rebates).
For rebates we use the condition types BO01 to BO05, and in the Requirement column we give the value 24 which is "Only in Billing Document".
This Requirement will ensure that these condition types will appear only during the billing document processing.
If new Requirements are to be defined we follow the procedure given below.
Go to T.Code: VOFM. - Maintain Requirements & Formulas
Click on the "Requirements" in the top menu and then click on "pricing".
We have a list of requirements, we can ask ABAP consultant to create new requirement based on the client requests.
And we assign the application type like V - Sales/Distribution etc.
AltCBV - Alternative formula for condition base value:
Formula for determining the condition basis as an alternative to the standard.
It is again a Routine that is written by ABAP Consultant.
It is used as a basis to calculate value of the condition type instead of using it from the "FROM" column.
Ex.: Freight - KF00.
Freight is calculated based on weight, volume etc. and not on the base price. In pricing there is no entry of weight from which the value can be referred like we do for discounts using base price. We have to get the value from the Material master.
In this column we can mention the value as 12 - Gross Weight or 13 - Net Weight.
During pricing, the system will consider the value that is mentioned in this column and determine the freight based on this value.
Suppose we have Net weight: 100 kgs and Gross Weight: 150 kgs. And if we mention 13 in this column then the Freight condition KF00 will be calculated using the weight as 100 kgs.

Comparison between Forms6i and Forms9i

We have some client/server-based applications built in Forms6i and are considering to convert/rebuild them into Forms9i or JDeveloper as web-based applications. Has anyone done any comparison between Forms6i and Forms9i/JDeveloper? Or, can you point me to such documentation if existed?
Thanks.

For comparison between forms 6i and Oracle9i Forms check out the new features paper on:
http://otn.oracle.com/products/forms
Comparison to JDeveloper? How about the fact that you develop with Java language in JDeveloper and with PL/SQL in Forms.
I would suggest that first you try to run your application on the Web using forms 6i. This should be a very simple test to do. See how you like it and only then ask yourself if you really need to go to JDeveloper.

Comparison between 3750 and 3750-metro

hi folks,
is there any links which will provide me on the comparison between 3750 and 3750-metro? for exapmple, isis is not support on 3750 but it support on 3750-metro. The product information from cisco site is insufficient in term of the main differences :p
rgd
josh.w

Hi Josh,
The Cisco Catalyst 3750 Metro Series is built for Metro Ethernet access in a customer location, enabling the delivery of more differentiated Metro Ethernet services. These switches feature bidirectional hierarchical QoS and Traffic Shaping, intelligent 802.1Q tunneling with class-of-service (CoS) mutation, VLAN translation, MPLS, EoMPLS, and Hierarchical Virtual Private LAN Service (H-VPLS) support, and redundant AC or DC power. They are ideal for service providers seeking to deliver profitable business services, such as Layer 2, Layer 3, and MPLS VPNs, in a variety of bandwidths and with different SLAs.
The metro switches have the PXF chips (which allow hierarchical QoS on the 2 "WAN" GigE ports, so several logical links can share a connection, and have soft bandwidth limits).
For more details on 3750-M switches have a look at this link
http://www.cisco.com/en/US/products/hw/switches/ps5532/products_qanda_item09186a00801eb822.shtml
HTH
Ankur
*Pls rate all helpfull post

After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

One More Rant as to Fios features and "improvements"

What kind of marketers does fios have that force their programmers to do such a horrid job?
my wife and i got up this morning. beautiful sunny morning, warm for the first time. we turned on the tv, and saw a show we wanted, so i hit record... as she was getting ready for the day, i saw one that we could watch with breakfast. so i paused the movie, and we went to make breakfast... made it, came back, went to watch the movie, fast forward to its start.
my wife then aks for the description of the movie... so you hit play, the menu comes up.. .
it goes away too fast and so she asked me to display it again.
i hit it, and now, for some screwed up reason, it throws me to on demand
i dont want on demand. on demand cant pause, the play back is bad, when its bad you cant restart and move to where you were, you cant skip, and the list goes on on how horrible its implemented.
but you dont have a choice.. your watching a movie from the beginig with full features, and now fios things you want to go to on demand to watch what your watching with reduced features... screwed up
but, when we get back to the channel to see the movie... its now fast forwarded to current time, and fios has deleted the lead time so you cant go back
in fact, fios does this alot... unlike directv, which says, if you save some movie time, dont delete it.
fios says, if you save some movie time too bad, we know better, we will delete it, and peeve you off, then force you to a free on demand of the same movie wiht fewer features.
but now... you go to the movie on demand, click the hd like you had and go to try to watch and what do you get? a completely unwatchable scrambled mess that cant play no matter how many times you try.
so isnt that great... we have a wonderful morning. save a bit of time to cook a great breakfast, sit down happy to watch, and voila... the fios programming is so horrid it ruins your morning... you dont get to watch what you want, you lose what you have, your now **bleep** off at the DVR and you know that as long as your stuck on crap city dvr programming, your going to hae to deal with this oer and over
the new feature to go watch what your already watching is insanely stupid and horrid..
why does fios think that you want to stop what you are watching with longer pause time, ability to go back wards and forwards.. .which is critical to be able to get rid of the audio artifacts that constantly come up and scramble the voice.
this is one reason my wife and i try to avoid watchnig on demand. it not only wont let you back up to get rid of the audio crud, but will lose your location... want to really have fun? watch a movie for an hour and a half be on the last 15 minutes, get audio artifacts scrambling the sound, and now you have to watch 1 and a half hours with commercials to get back to what you were just watching..
oh joy
not to mention another issue is that you pay for 75megs... and then fios takes the time to slowly move your speed down farther and farter unless you watch it and call and spend an hour getting what you paid for.... ie, their norm is to cheat you from what you pay for, to some lower rate and pocket the money.
right now, i pay for 75, i get 50, and sometimes it drops to 30...
why pay for 75, if you only get 50..
why have to keep calling to stop them from cheating you? i earn money when not calling fios.. .
and i know its a cheat as they never make a mistake in your favor.
you never ever subscribe to 50 and accidently get 75.
what a freaking mess..
my wife and i are disussion paying more to get away from this horrid thing.
and its been horrid this way for two years of our subscription
the idea that the DVR delete time you have saved sucks big time.
the fact your disk drive is too small to record everything so this doesnt happen sucks
the fact that they replace commercials with stuff that is connected to google and facebook really sucks
[i went online looked up some stuff and for months had to see the same commercial over and over for some scam options trading book i dont want, never wanted, was never interested in, etc... but i could not shut it off to see other commercials. even worse, they will do this after you buy the product in other cases. i was at work, needed to search for something, now that something my company purchased is unundating me with ads for something i already purchased!!!!]
the idea that fios changes the operation of the DVR then blames you for not knowing the changes, or being used to how it is and you been using it for years...
all that stuff is completely annoying... as is having to get a pin number to log in every time as passwords dont work right. i had to create a diferent forum id, as the system would not let me log in with the one i have... so i have to reregeister to post most times...
they would be the best company in the world if it wasnt for the idea that they leverage the great tech to mistreat their customers, give bad service, program the dvr with substandard choices of operation, cheat them out of bandwidth stealing time from their lives they wont get back to tell them to up it again.. (sorry, i am a programmer in researxh computing, its not hard to know how much bandwitth your delivering and compare that with the contract rate. if i didnt pay my bill, you would harm my credit, my family, and future... but you get to cheat the customer out of bandwith they pay for, and what happens? nothing...
of ourse this rant will go nowhere... why should it?
its not like they will refud me the money for bandwidth they didnt deliver (as i dont have the time to have some person who can barely program tell me to reboot hundred times and waste an hour before saying, its on our side. etc).
its not like they will change dvr programming to presere what you want, and not dump it cause they want to
the way i see it, the only reason for them to dump what your watching to see what your watching is so that they can fluff up the numbers on the on demand services when reporting growth to shareholders... ie. scamming the investors.
there is no other real reason to have that other than scamming or incompetence. and neither are good... are they?
dumping what people are watching for the same thing with less features cant be spun into a postive.. can it?
thats it for now...
rather than watch a movie this morning and being happy, we did not get to have that
in fact, we are thinking why bother with a service that constistently changes a good day into a bad day as a NORMALcourse of business?
[i have been a customer since their bell atlantic days... their tech is great, but this stuff really stinks and with their money and so forth, they could do a lot better... switching back to directv may be the only way to go as that dvr does not do the stupid horrid stuff that fios does, it preserves your shows, and overall, the software is much better, without any artifacts or scrambling all the time...
i suspect that i will lose this online name again... why not? they lost the other one and locked me out of that...

There are settings you can change or disable for some of the issues you mention. you should go into the menu's settings and explore. Turn off promotions, etc..

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

When I open Safari 5.1.5, it automatically opens all the pages from my previous session. Can I turn off that feature , and how?

When I open Safari 5.1.5, it automatically opens all the pages from my previous session. Can I turn off that feature , and how?

Hi...
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
Restart your Mac.

I bought a used ipod touch. The music on it was not my taste. I found a delete feature and now EVERYTHING is gone. No icons. Nothing. How do I get it back?

I bought a used ipod touch. The music on it was not my taste. I found a delete feature and EVERYTHING is gone. How do I get the icons back and start over?

If you did not yet connect with iTunes, you can place any music from your library back into your iPod from the computer. When set to automatically manage usic and videos, whatever iTunes finds changed in your music app will be reset to what is on your computer iTunes library.

How do I uninstall iCloud from my Windows 7 PC? It isn't in the list of programs, but is in the list of Features and Programs.

I hope someone can help me to remove iCloud from my Windows 7 PC. For some reason I can't use it, because I can't login. No matter what I do to reset my info, it won't allow me in. I want it gone, for it is to much of a hasel. It isn't listed in Features and Programs, but is in the liste in the Control Panel.

I installed I cloud on my windows & Pro desktop PC. I went into Programs and deinstalled the application. WHen I open Internet Explorer.....Kaspersky opens a green surround window and takes me to www.icloud.com!   I no longer have the applications installed!
If I close the window Kaspersky opened and go the the web address, and click on a button to download an audio interview, the site wants to ONLY dowload i-tunes version of the audio file.
I deinstalled i-tunes and still the site only want to send me the i-turnes version of the audio file!!!
I do not want to be constantly bothered by Kaspersky opening the green surround Internet Explore window and taking me to www.icloud.com.   I do not want to have web sites only offering to send me i-tune audio files.
For both my I-pad Air and my I-pod Ver 5 I have gone into settings -icloud and gone to the bottom of the list and turned icloud off.
My problem is in on my desktop PC.   I do not want to have Kaspersky generate the green surround window and take me to www.icloud.com.
Will someone PLEASE help me. I so wish I had never installed Icloud.
thank you.

I am not able to access the "featured" and "top charts" in the app store

I am not able to access the "featured" and "top charts" icons in the app store. Everything else works fine.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

FormsCentral Alternatives - Comparison Matrix :: Features and Pricing

Similar Messages

Maybe you are looking for