FormsCentral - design form : Initialize form field with default value

Hello,
          My customer asks me to initialize text fields with default values. Example , Name , email , phone number etc to be displayed by default till it is overwritten by values entered. Could you please guide me how to achieve this ?
Many Thanks,
Sree

Hi,
see Re: sequencing problem-Forms
Regards Michael

Similar Messages

  • Initializu00EDng select options field with default values and with NO INTERVALS

    Dear All,
    I have used WDR_SELECT_OPTIONS technology within WD Abap.
    I also have added the fields which have to be taken into consideration.
    lt_range_table =
    wd_this->m_handler->create_range_table(
    i_typename = 'PLANT' ).
    wd_this->m_handler->add_selection_field(
    i_id = 'PLANT'
    it_result = lt_range_table
    i_read_only = read_only ).
    Can I assign two values to this field 'PLANT' whereby the user may take only these values.
    I mean kind of pre initializíng of this select options field with default values.
    Due to this handling it should be prevented that the user can give other values
    except this values.
    Additonally it should be fine whether it is possible to disable the second input field
    of this select options field like NO INTERVALS .
    Regard
    sas
    Regard
    sas

    wd_this->m_handler->add_selection_field(
    i_id = 'PLANT'
    it_result = lt_range_table
    I_NO_INTERVALS = 'X'
    i_read_only = read_only ).
    Pls check 'WDR_TEST_SELECT_OPTIONS' web dynpro component

  • Portal Forms - How to make a Field with DEFAULT value NON-EDITABLE by Users

    I HAVE A FORM WITH A DATE FIELD ON IT WITH DEFAULT VALUE.
    THIS IS A TABLE-FIELD.
    I WANT THE FIELD TO BE DISPLAYED ON THE FORM BUT NOT TO ALLOW
    USERS TO EDIT/CHANGE IT.
    HOW CAN I DO THIS?
    TKS IN ADVANCE

    Hi,
    see Re: sequencing problem-Forms
    Regards Michael

  • How to populate a hidden form field with a value passed from another page

    I'm using PHP/MySQL and DW CS4.
    I am trying to obtain the external key for a table, and include it as a hidden field in a form for a second table.
    The user selects a "need" from a list and is taken to a new page which displays the need selected in the prior page and a form the user can fill out with details of his offer, there should also be a hidden field in this form that contains the index to the needs table, this hidden field holds the external key. Most of the code is working, except for populating the hidden field with the external key. I have proven(by printing it to the screen) that I have obtained the external key and stored it in a variable ($saveNeedId) . What I'm unable to do is assign this variable to the hidden field in the form I'm about to store in a table. Sometimes I get zero and sometimes I get the index to the first need in the table. This ought to be simple but I can't get it to work, I must be missing something obvious - still very new to PHP.
    Here's the code that sets up the variable and prints it to the screen for test purposes
          $saveNeedId = "-1";
              if (isset($_GET['needId'])) {
                $saveNeedId = $_GET['needId'];
                print $saveNeedId;
    Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
         <input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
         <input type="hidden" name="offerId" value="" />
         <input type="hidden" name="MM_insert" value="form1" />
    The page where the user sees the list of needs is here www.hollisterairshow.com/weneed.php
    I'd really appreciate sone help with this, I've tried all combinations of double quotes, percent signs and nothing works...sigh.
    Tony

    Here's the code that sets up the variable and prints it to the screen for test purposes
          $saveNeedId = "-1";
              if (isset($_GET['needId'])) {
                $saveNeedId = $_GET['needId'];
                print $saveNeedId;
    Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
         <input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
         <input type="hidden" name="offerId" value="" />
         <input type="hidden" name="MM_insert" value="form1" />
    <input type="hidden" name="needId" value="<?php echo $_GET['needId']; ?>" />
    I looked at your page. It looks like you figured it out.

  • I have created a form that contains fields with default text for a user to update/personalize.  Is there a way to style the text so I can quickly identify changes to default text in a field?

    I have created a form that contains fields with default text for a user to update/personalize.  Is there a way to style the text so I can quickly identify changes to default text in a field?

    George - Thanks you so much!  Actually, i'd love for the text color to be red font color.  Could you send me the script for that? And I assume I just copy and paste the script into the field properties (see screenshot)?
    thanks again!
    Seth

  • Form field with comma delimited value list to cfc

    I have a form that passes a field to an action page with a
    comma delimited value.
    For instance the field name is: Program_ID
    value for program_ID is: 31, 32
    I am able to treat this variable as a list and check its
    length, and loop over the list prior to passing it to a cfc using
    the attached code:
    When I try and pass the variable as a string to a cfc and
    invoke a query, cf no longer recognizes my var as a list.
    Therefore the code attached does not function...
    Is there a specific var type that will pass through as a list
    and allow me to run the code block attached?
    thanks
    Craig

    Ok answered my own question.. Here is the answer for those
    who are interested...
    initialize var for cfc in cfinvoke statement
    <cfinvokeargument name="Program_ID"
    value="#Form.Program_ID#">
    pass argument to cfc as a string
    <cfargument name="Program_ID" type="string"
    required="true">
    use listqualify to parse list in cfc and set new var
    <cfset selectedProgramID =
    ListQualify(Program_ID,"'",",","CHAR")>
    use the new var in the following statement in sql code:
    ((Program_ID) IN (#PreserveSingleQuotes(selectedProgramID)#))
    The following code handles a form field with a single value
    or a comma delimited value.

  • How to Map Proces form field with Resource form field?

    Hi,
    How to Map Proces form field with Resource form field while creating Process form in Form designer

    Are you talking about Provisioning ?
    then you do that in Data Flow under Process Defintion in OIM 10g
    In OIM 11g you use Request Dataset. In that you can directly map fields to process form.

  • Initialize some fields in material master with default values

    Hi,
    I would like to initialize some fields in material master MM01 with default values.
    for exemple in the view MRP1 there is a field MRP type I would like to initialize PD in the field as default value.
    but when I go to the technical information there is no parameter id that I can use in SU3.
    Do you know how I can the initialize the field those don't have parameter ID?
    thank
    Dede

    Dear Glenn,
    This is possible in SAP for this use T code MMD1 and create MRP profile and assign this MRP profile while creating material using MM01 in the organisation level put this created MRP profile. The values you maintained in this profile get copied to the material by default.
    To maintain MRP profile go to MMD1->give your profile name...........> click on  selection screen push button--->give here profile description--->select what MRP  field which u want to make fixed one/default. if make fixed later you can not change--
    >click on data screen 1 push button and maintain your value and save
    sree

  • How to preset fields in TA BP with default values

    Hi!
    I want to fill few fields in transaction BP with default values.
    This should be if there`s a new business partner to insert.
    If i can do this depending on the selected role it was the best
    First i thought on SPA/GPA-parameters ... but then i can`t do it in depence on the selected role.
    In customizing i can tell only if a field should be displayed or not, for input or not, ... but no values to insert.
    Is here anybody with a good idea for me?
    Thanks a lot in advance.
    Best regards,
    Ingo
    Edited by: Ingo Schmökel on Jul 1, 2008 7:20 PM

    Hi,
    There is one possibility which requires an enhancement of the
    BDT event ISDAT and a call to the function module
    BUP_BUPA_FIELDVALUES_SET. This means that an ISDAT function module needs to be written (transaction BUS7) which calls the function module BUP_BUPA_FIELDVALUES_SET with the needed values that are to be defaulted. You can read the role value using BUS_PARAMETERS_ISSTA_GET (T_RLTYP).The fields which are possible can be found in the DDIC structure BUSDEFAULT. However this is limited only to the fields inside this structure.
    Thanks and warm regards,
    Smita.

  • How to preset fields in a transaction BP with default values

    Hi!
    I want to fill few fields in transaction BP with default values.
    This should be if there`s a new business partner to insert.
    If i can do this depending on the selected role it was the best
    First i thought on SPA/GPA-parameters ... but then i can`t do it in depence on the selected role.
    In customizing i can tell only if a field should be displayed or not, for input or not, ... but no values to insert.
    Is here anybody with a good idea for me?
    I`ve posted my question first in crm-section but i think here it`s better
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi,
    There is one possibility which requires an enhancement of the
    BDT event ISDAT and a call to the function module
    BUP_BUPA_FIELDVALUES_SET. This means that an ISDAT function module needs to be written (transaction BUS7) which calls the function module BUP_BUPA_FIELDVALUES_SET with the needed values that are to be defaulted. You can read the role value using BUS_PARAMETERS_ISSTA_GET (T_RLTYP).The fields which are possible can be found in the DDIC structure BUSDEFAULT. However this is limited only to the fields inside this structure.
    Thanks and warm regards,
    Smita.

  • How to insert row where DB date field has default value.

    APEX 4.1, Oracle 11.2
    I'm trying to insert a row using "javascript:addRow();" where the report query is an SQL Query (Updateable Report).
    1)  Several of the fields are display-only with defaulted values.
    2)  No problem with the VARCHAR2 fields.
    3)  And if RUN_DT is a text field, the insert works.
    4)  But I get errors when trying to make RUN_DT (DD-MON-YYYY) display-only and default it to P63_RUN_DT.  I display P63_RUN_DT so I see it is correct.
    Now, this is not a new question.  See:
    Error inserting sysdate with time in tabular form region  https://forums.oracle.com/thread/2551916  (Not answered)
    Date value in tabular form  https://forums.oracle.com/thread/2478358 (Not answered)
    Help! Unable to set default date value for Tabular form DB date field! https://forums.oracle.com/thread/2473208  (Not answered)
    Default Value Date Picker Field https://forums.oracle.com/thread/2468973  (Not answered)
    Tabular Form Default Value PL/SQL https://forums.oracle.com/thread/2464192  (Not answered)
    Display 1st region invoice date into tabular form invoice date column. https://forums.oracle.com/thread/2458561  (Not answered)
    Default System date and time in Tabular form https://forums.oracle.com/thread/2449615 (Not answered)
    Setting default value of Tabular form item is not working https://forums.oracle.com/thread/2396024 (Not answer)
    apex tabular form https://forums.oracle.com/thread/2337098 (Not answered)
    Various folks recommended using Default PL/SQL and SYSDATE when SYSDATE was the desired default value.  That worked for some and not for others.  I could not get it to work for me.  The errors I receive are "•Column must have a value. (Row 1) " and "ORA-01410: invalid ROWID".   I believe the ROWID error is an example of spurious error cascade caused by the RUN_DT problem.   I believe it will disappear once the RUN_DT problem is solved.
    I will try to replicate on apex.oracle.com
    Thoughts?
    Howard

    Update: At least in my case, it seems the RUN_DT date column cannot be Standard Report Column.  I made it "Display as Text (saves state)".  Standard Report Column works for the defaulted VARCHAR2 columns.  Go figure! 
    (more)  And I could not get it to work with "Item" (P63_RUN_DT) as the Default.   However, it seems to work -- so far -- using Default PL/SQL of TO_DATE(:P63_RUN_DT,'DD-MON-YYYY').

  • Records with a picklist field with empty values can't be seen from a report

    Records with a picklist field with empty values can't be seen from a report. I've created a report that have a picklist as a column. When there is no values the record(s) associated to this picklist don't appear. Do you know what are the common causes for this event?
    Regards
    Arturo

    Hi samrat chakraborty ,
    go to SUIM > roles > roles by complexselection criteria>
    under the selection according to authorization values give the object's  form SU53 screen and press enter it will asks the values for given object pass the values as per the SU53 and execute it will give the list of roles.... capture the roles. The user gets access if you give the any one of the listed roles is assigned, assign the role as per your approval process.
    Check with the below link for more assistence:
    http://help.sap.com/saphelp_erp2004/helpdata/EN/71/8fba30840c6e4d90da3526971cc684/frameset.htm
    Regards,
    S.Manu.

  • Table editor problem with default value for column

    Hi there,
    I'm trying to use SQL Developer 1.2.1 on Ubuntu 7.10 (though I don't think the OS is relevant) and I'm running into a snag when trying to update table structures. If you go to edit the table to say modify a column name, and that column has a default value set, SQL Developer is encapsulating the value with brackets and quotes. When trying to save the changes, it complains about the default value being 4 chars too many for the column width. An example of this would be a currency code column of varchar2 (3) set with EUR as the default. SQL Developer changes the value to ('EUR') hence the error.
    Is there anyway to prevent this from happening?
    Cheers,
    Chris

    Could you please be more specific? In 1.2.1.32.40 I
    added the column COL1 VARCHAR2(3) with default value
    'EUR'. The data display field refreshed to show the
    default value, so I edited it in a couple of entries
    and comitted the change without problem. Then I
    renamed the column from the "Edit table" popup menu.
    Finally, I renamed the column from the "Rename
    column" popup menu, no problem either.Ah, you are correct. That does work. What I was trying is select tablename in the object browser, then right click on it and select "Edit" from the contextual menu. You are then presented with edit table dialog box. If you then select a column in that box you will see a column properties box. In that section you can change the name, default value, datatype et cetera. Note that your default column value which should just be EUR (or 'EUR' to denote that it's a string) is now ('EUR'). Once you try changing the name to of the column to something else and then click OK, you should then get an error complaining of "Invalid varchar2 default value" with a more specific message of "Default values size 7 is greater than the allowed 3"
    You have provided a work around, and thanks for that, but it would be nice to edit everything in the Edit table dialog box if you're modifying more than one column name. I'm tasked with cleaning up a bit of a messy database, and there are a good deal of columns to be renamed.
    Cheers,
    Chris

  • Mass changes of Material Master field with different values

    Hi,
    How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
    Thanks,
    K R Vishnu Kumar

    Hi Kumar.
    I think you have to use LSMW for mass updation for Material Master fields with different values.
    Regards,
    Rahul.

  • How to Add column with default value in compress table.

    Hi ,
    while trying to add column to compressed table with default value i am getting error.
    Even i tried no compress command on table still its giivg error that add/drop not allowed on compressed table.
    Can anyone help me in this .
    Thanks.

    Aman wrote:
    while trying to add column to compressed table with default value i am getting error.This is clearly explain in the Oracle doc :
    "+You cannot add a column with a default value to a compressed table or to a partitioned table containing any compressed partition, unless you first disable compression for the table or partition+"
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#sthref5163
    Nicolas.

Maybe you are looking for