FormsCentral site not working right on Windows 8

I cannot open the "My Subscriptions" page - Keep getting errors about Adobe Flash which I have reinstalled twice, and I have also tried 3 different browsers: IE10, Chrome, and FireFox. Please help - I need to cancel my subscription...

Hi Matt,
Did the steps I sent you by email help?
-David

Similar Messages

FingerPrint Sensor/Software not working right with Windows XP Pro SP3

Hi All,
I have a 3 month old Satellite Pro S300-S2504 (2.4 GHz CPU, 3 GB RAM, Bluetooth, firewire - was a custom build with most of the options I could get). The O/S installed was/is Vista Business. It came with a dowgrade XP Pro SP3 disc as well.
I bought a second hard drive - swapped it with the original and installed Windows XP Pro on it - having grown tired of Vista. I don't intend to keep both O/S's - but I didn't want to mess with what I had until I got XP working - and that's the reason I got the second hard drive for XP. Anyway, XP Pro is installed and working except the fingerprint sensor. As soon as I booted for the first time - with nothing but the factory everything installed, it prompted me to register fingers for the sensor. I tried but I got a database not found error followed by a sensor not working error. I got the latest updates for the fingerprint sensor, removed what I had - rebooted and installed the newer program - I got the same error. I then uninstalled the program again, went through the registry and removed all entries whose key had TrueSuite in it, rebooted and installed the latest version again - rebooted - and got the same errors. Looking in Device Manager, the sensor is working fine but once I try to register a finger and it fails, I then look in Device Manager and the sensor has a yellow error indicator. I used System Restore to go back to the original configuration and then tried the Fingerprint drivers/patches for Vista and for Windows 7. All of them installed but I got the same database not found error followed by the fingerprint sensor not working error.
I did end the program, then using Task Manager, I ran the Fingerprint utility as administrator - still got the same errors. I've completely reinstalled from the Windows XP restore CD four times trying to solve this and I can't get the fingerprint reader to register fingerprints - I always get that error.
I have a lot of graphic editing (movies) software as well as file conversion programs and a very stable version of Roxio Easy Media Creator that all works fine in Windows XP - but it all has problems running in Vista and I'm tired of the bugs that Vista seems have - and I want to use Windows XP Pro. I will try any suggestions. The fingerprint sensor and software works reliably in Vista. I even updated it and that went fine. I suspect there's a problem with the XP version of the software for my computer. I did notice that Toshiba doesn't sell the this model series with XP downgrade as an option anymore. I wonder if this is one of the reasons.
Anyway - I would very much appreciate help with this. Any ideas at all are welcome.
Thanks,
Dennis

Satellite Pro M10-S405
..a clean Win XP Pro install and it still doesnt work.There is a Win Xp key on the bottom of the laptop, but I cant seem to use it.
The Product Key that comes with the computer is useless to activate a retail installation. You would need to purchase a new one or convice Microsoft that an old one is no longer in use.
In the device manager it shows
Ethernet Controller
Multimedia Audio Controller
Network Controller
Unknown Device needing Drivers. I have searched and downloaded drivers and installed them but it still doest work.
Get the drivers from here.
Install the chipset utility first, followed by the display driver. Be sure to install the common modules prior to any Toshiba utilities, including power management.
-Jerry

SmartView 11.1.1.3.01 does not work right with Windows 7 64 bit

We have a user running Windows 7 64 bit and Smartview 11.1.1.3.01 that is having a host of issues
1. After initial install SV works as expected
2. If He either shuts his computer down or closes excel and reopens smartview he is not able to save data, nor when doing adhoc query analysis is he able to manually enter dimensions into the cells and click refresh. For example, He will open the connection and ad-hoc query analysis. Drag over the year dimension, enter FY12 in the cell, click refresh and FY12 disappears, he can manually choose it out of the tree and it will stay.
All Windows XP users do not experience this issue
any help would be greatly appreciated
thanx
mike

Which version of MS Office are they using?
Did you confirm the plugin was installed using the run as administrator windows command - as there have been issues when not using this caused problems too.
Can you try using the later version plugin: 11.1.1.3.500. Be careful though that you don't hit the following:
Issue: After upgrading from Smart View v11.1.1.3 to Smart View v11.1.1.3.500, the connection screen box is blank in Excel 2007 on Windows 64-bit systems.
Cause: The registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView was not updated during the upgrade and contained incorrect information.
Solution
In the registry editor, delete the registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView and run the Smart View v11.1.1.3.500 install.
Note: By deleting this key, you will lose stored information for: Connections, Login, Options, Preferences. These will need to be recreated.
Cheers, Iain

VISA serial not working right in Windows 7

Howdy. I wrote a fairly straightforward VISA serial read and write program in LV 2010. I use VISA write to send a query through the COM port, then use VISA read to get the response and display it for the user. I do this for several more addresses, then go back to the first one, and then it continues to loop over and over. It works fine when I run it as a vi on my computer, and it runs fine when I compile it and run the executable from my computer as well. My computer has Windows XP.
However, when I transfer the exe to a laptop running Windows 7, it either works sporadically, or not at all. I know LV is installed correctly because a couple other small programs work fine, and as I said this one will occasionally communicate, although usually I'll see the wrong address being displayed.
At first I thought it was my code, but no matter how many different methods I tried, it would always work perfectly fine under XP, but awful under Windows 7. Then I ran into Windows 7 USB and COM port driver issues with a different, nonrelated software program, so now I'm beginning to suspect it may be Windows 7 that's the culprit and not my code.
ETA: LV is the only program running on the Windows 7 laptop, so I know there is nothing else trying to use the COM port. Plus, I have shut LV completely off and restarted to make sure LV itself isn't still holding the COM port and that didn't help either.
Anyone else run into something like this?
Amateur programmer for over 10 years!

Actually my LV code is talking through a standard DB9 COM port. It was another software application I use that communicated through a USB-to-COM converter that I found worked fine via plug-n-play in XP but I had to go through multiple steps to finally get it to work under Windows 7.
Here's a sample of my code. This is step 4, so I've already established my COM port settings earlier. It sends out a query, in this case "MD 8009", and the microprocessor will echo back the query plus a value, like "MD 8009 75". The serial communication in this device is very slow, so I send the message, then I have to loop for a while until I see a response that includes the original string plus more data. If I don't see a reply that looks correct after so much time, I try sending the query again 20 more times before I give up and flush the I/O buffer then move on to the next address. If everything works well, I store and display the data, flush the I/O buffer, then move on to the next query.
Amateur programmer for over 10 years!
Attachments:
Com port LV.JPG ‏90 KB

Just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

[Quote]
Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts. I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
[/Quote]
Well I found nothing wrong in your post. So why even make a statement like the quote I included?
Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
No bashing, no adversarial post just a little common sense is all I use.
And again your post was great.
Good Luck

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Some web sites not working in FF but they are OK in Safari.

A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJT

Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you

Hp advisor not working right

I have a laptop HP HDX X16T-1200 CTO PREMIUM NOTEBOOK PC and it has two problems
first one COMPUTER WON'T DO SYSTEM RESTORE TO AN EARLIER TIME, I have a lot of restore points
second one HP ADVISOR IS NOT WORKING RIGHT, I open the dashboard and everything starts working but security part keep saying it's initializing, at the same time I get a little message that says hp advisor has a problem windows is checking for a solution but so far a did not get any solution.
Can somebody help please

Going back to a restore point can be problematic if you are using Norton. It has tamper protection setting among others that cause the Windows ssytem restore point process to fail.
What version of HP Advisor are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

History site not working correctly

The menu bars do NOT WORK right all the time... trying to clear history for november.. none of the links are available. This is most trying!

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Dc7700, window7, machine speaker not working. migrating from window xp to 7

dc7700, window7, machine speaker not working. migrating from window xp to 7

Hi:
Just download and install the latest Realtek HD audio driver from the Realtek site.
Accept the agreement. Download and install either the first or second driver on the list depending on whether you installed the 32 or 64 bit version of W7.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

Extend studio extensions do not work right in DW CC

I have Flexi Layouts Pro 2 and JQuery Media Pack installed within the latest Adobe Extension Manager CC and I cannot edit them or get them to work properly, it's like some of the menus/dialogs are missing or cannot launch. They are licensed products however, it shows a BUY bar on the top of each application bar as if they are trials. The editing function does not work in any of the JQuery Media Pack apps.
Windows 8.1
I have re-installed the DW CC software and updated the CC Manager
reinstalled the extension and air components
I have reset licenses
Anyone have a solution or have the same problem?
I really need help here --- these apps are not cheap

Seems with CC 2014.1, you must disable (uncheck) "Live View" option. Once I did that, the dialogs worked
extend studio extensions do not work right in DW CC

FormsCentral site not working right on Windows 8

Similar Messages

Maybe you are looking for