Formula Line Breaks

I'm trying to format text so that there are line breaks in a generated string, but in such a way that it can work with Xcelsius.
I'm aware that you can use CHAR(10) in Excel to make a line break, but Xcelsius doesn't like the Char function.
Here is my formula: ="Item A:" & C39 & "Item B:" & C40
I want it to look like:
Item A:
Information from C39
Item B:
Information from C40
Does anyone know a way to have line breaks in a formula that Xcelsius can accept? The object is to get the text into a text box.
Thanks in advance!

Use the following Formula ..
="Item A:"&"
"&B3&"
"&"Item B:"&"
"&B4
if you want the Line break in formula "Item A:"&" then Hit ALt+ Enter .it will come in new line..
Xcelsius can accept the line breaks in a formula.
Hope this helps.
Thanks,
Srinivas Dandamudi

Similar Messages

Line break/carriage return in formula

Hi, I have an IF ELSEIF formula that works fine. Problem is they now wants the result to show a few paragraph instead of a few words. Can someone help me figure out how to insert line breaks/carriage returns in a formula. Thanks.

This is what I have:
If (CurrentDate> {@21Days}) OR (CurrentDate >{@LastMonth})THEN "NOTICE OF TERMINATION OF CHILD CARE CONTRACT FOR NON-PAYMENT OF FEES. + chr(10)+ Lets see how to make a paragraph"
ELSE
If (CurrentDate<{@LastMonth}) THEN "SECOND WEEK NON-PAYMENT/PARTIAL PAYMENT NOTICE"
ELSE
If {tblAROpenDoc.dtmDocDate} in LastFullWeek THEN "FIRST WEEK NON-PAYMENT/PARTIAL PAYMENT NOTICE" ELSE ""
the chr(10) shows
Any ideas?

Line Break for the column

Hi,
I have a BIP Report.
The report includes the layout of a free text column. This text goes towards the right side for sufficient length.
I want to wrap the text or line break this text.
In the rtf template, I am using the following formula:
<?html2fo: OUTPUT_NOTES?>
Any Ideas?

Dear,
Add the UDF's on the marketing document you want the tax break up.
Apply FMS using below queries and call these UDF's on your PLD.
FOR BED
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount =$[$38.21.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='9' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For Cess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='8' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For HCess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='10' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
This will help you.
regards,
Neetu

Carriage Returns / Line Breaks

I have a requirement to display a customers address in 1 column of a report. The address is stored in the RPD as Address1, Address2, etc. etc. Can I create a formula that concatenates the address fields and puts a line break, carriage return after each field?

Hi,
I had the same problem as member "user12673225". This worked well if I print the file in HTML, but when I print the file in PDF, the HTML control code appear in the PDF report.
e.g.
LTHEA A | P.O. BOX 877 *<br* | KY | VERNON A 100000479 |
VERNON | /> GRAND...........|....|.............................|
...........| CAYMAN.............|....|.............................|
...........| KY1-1103 *<br*......|....|.............................|
...........| /> CAYMAN.........|....|.............................|
...........| ISLANDS.............|....|.............................|
Presently I generate the report in HTML then I convert it in PDF format.
Is there a way to print the report directly in PDF without the html control appearing in clear in the pdf, to do the job all in one step?

Line break

Hi,
I need a solution for a problem i have with some of my reports. The thing is that if a text doesnt fit in a single line i want the line break to happen on a particular place. For example: 'A car costs more than a 10000 USD' - If this text doesnt fit in a single line i want the line break to be before 10000. I want '10000 USD' always in a same line. Any suggestions?
Thanks

create a formula column and inspect the text and return the string as you want

Insert Line Break with Syndicator

Hello,
I have a quite "simple" question: Is it possible to insert a linebreak after a record set using the MDM Syndicator? By default there are some values offered, like ',' or ';' and so on to seperate values, and you can specify seperators by your own. But how to specify a line break?
Thanks for your replies!
Andreas

Andreas,
As far as I know, there is no support for specifying the line break. The records automatically appear in separate rows (If you are using Flat file as Destination).
If you still need to specify your own custom character at the end of each line, create a "Custom Item" and enter the required character in the "Formula" for Custom Item and map this custom Item to a newly created destination field (at the end of all destination items).
Hope this helps,
Regards,
Rajani Kumar

Function: Return First Line of Another Cell (before line break)

Howdy all!
I have a bunch of cells that have multiple lines (line breaks created by pressing option-return). I want to create a function that will return the first line of a cell (IE: the text before the first line break). Any thoughts on how to do this?
IE, if A1=
Test 1
Test 2
Test 3
Then I want to point the function from another cell to A1 and have it return Test 1.
The code would look like this:
=REPLACE(A1,SEARCH([line break],A1),LEN(A1)−SEARCH([line break],A1)+1,"")
(IE: It searches for the line break, then replaces everything from that part on with nothing.)
The problem is that I don't know how to get Numbers to think about [line break]. Thought that =char() would work but I don't know the unicode to put in (85, 2028, and 2029 didn't work).
Thoughts?
Matthew

Thanks, I thought that I had tried that at some point, but I guess I hadn't done it correctly!
I made one adjustment, I subtracted one from the SEARCH. The formula as you have it actually returns the line break along with the first line (you can't see it in your example because your rows are taller). (I also removed the third peramiter from the SEARCH, but that is a personal preference.) Outside of that this works perfectly. Thanks!
B1=LEFT(A1,SEARCH("
",A1)−1)
Matthew

Exporting EPUB from InDesign CC not including line breaks

I am done with a book and have it formatted the way I want. I am exporting it to EPUB through InDesign CC and previewing it in iBooks and also through Kindle previewer. Everything is fine except for one thing... where I have created page breaks, the exported file is not including them.
I tried exporting to HTML just to see what it did and there is no line breaks there. I know its proprietary markup ( in kindle ) but I still would like to include them in a few specific places ( to mark seperations of chapters ).
In kindle this is the tag they say to use: <mbp:pagebreak />
In iBooks, I have not yet figured out how to create them, I am going to work on that today once I sort out the kindle version.
Is there any way to force it to include line breaks on export. Or alternatively, I could export to HTML but I am having trouble figuring out how to go back to the EPUB format from there and also it didn't include the fonts, so there was other issues to consider as I have a custom font I was using for the headers that looks really good and matches the font on the book cover as well... so I really want to keep that consistent if possible.
Are there any tricks or things I can try here to improve on my workflow and do a better job of seperating the chapters ?

Ok, I hadn't tested the advanced options out in the export menu. It works and does so on both the iBooks and Kindle previewer.. which is good news since that is really important to me to try and find a workflow I can update both of these formats from when I continue to work on my book.
The only strange part is that on some chapters its adding an extra blank page between the chapter and the next. What is odd is that it only happens on some of them (in the iBook reader only, the kindle previewer isn't doing this)
I am going to look into this more closely but its not a major deal as I would prefer a little seperation in the chapters anyways, its not really a bad thing. It is just hard to figure out why its doing this.

How to get a line break

Hi All,
How do I get a line break within a particular field?
My DB structure is that I have 4 columns address_line_1, address_line_2 and so on. I cannot select them as different fields because all of them can be null, in which case i pick it from internal_address_line column.
I use:
SELECT DECODE(address_line_1, NULL, internal_address_line, address_line_1 || ', ' || Address_Line_2) as ADDRESS
But instead of th comma separating the 2 address lines I want a line break so that 2 address lines come in 2 separate lines in the output.
It doesn't allow me to use chr(10) as a line break and gives an error
I'm using Reports 2.5
TIA
Naveen

Yes, true.
How about setting up the sections as:
Section 1 Introduction ('Section num space introduction' in this example - tab may be better)
Then generate the Contents.
Then do a GREP find/change on the document after the contents:
This will add a forced line break and tab after each section number... You might want to specify a para style in the Find Format box too, so that references to Section xx in body text are not altered.
If you update Contents after this, you will get the line break and tab in the Contents too.

Not sure why line break is not working

Hi all,
Here is part of my simple Swing application:
String text1 = "hello";
String text2 = "world";
String text3 = text1+"\n"+text2;
// have also tried (String text3 = text1+"\n\r"+text2;)
displayField.setText(text3);I supposed that the text3 in the label field (displayField) would display like this:
hello
world
But not, the text3 just displayed in the same line like this instead: helloworld.
I am not sure why the line break is not working.

Use HTML for a multiline JLabel.// String text3 = text1+"\n"+text2;
String text3 = "<html>" + text1 + "<br/>" + text2 + "</html>";db

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

LE7:Score Layout:Global Format:Maximum Bars per Line - Line Break Bug!

Hello
This problem occurs in Logic Express version 7.
(I am using MacOS version 10.4.2 on an eMac)
I am currently compiling and editing a large score for a big band composition consisting of 22 parts:
Flute 1
Flute 2
Clarinet 1
Clarinet 2
Alto Sax 1
Alto Sax 2
Tenor Sax 1
Tenor Sax 2
Baritone Sax
Trombone 1
Trombone 2
Trombone 3
Trombone 4
Trumpet 1
Trumpet 2
Trumpet 3
Trumpet 4
Guitar
Keyboard
Electric Bass
Percussion 1 (Kit)
Percussion 2 (Aux)
I am creating the score in a separate file, and I am combining parts into 1 stave each by instrument like this:
Flute 1 & 2
Clarinet 1 & 2
Alto Sax 1 & 2
Tenor Sax 1 & 2
Baritone Sax
Trombone 1 - 4
Trumpet 1 - 4
Guitar
Keyboard (2 staves)
Bass
Percussion
Each instrument, with the exception of keyboard which has 2 staves, consists of one stave, making up systems of twelve staves each. By sizing down each score style to 2,
I have managed to fit 2 systems onto each page, therefore significantly reducing the amount of paper needed.
The problem comes when organising the layout of my score,
in particular, the line breaks. Using layout:global format, I have limited the maximum number of bars per line to 8, both in the page edit and normal score mode.
I am trying to divide up my score so that there are 8 bars per system. Using the white arrow tool, I am dragging bars up and down in order to achieve this.
However, when I get 30 odd bars in, I discover a system with 12 bars crammed into it - and even printing it off, it is clear that the system could benefit with less bars; the notation is squashed up together and not very easy to read.
THIS IS THE ACTUAL PROBLEM:
So I tried using the white arrow to move the last 4 bars down onto the next system, and a bug occurs where I end up with about 20 bars on the system, oddly distorted, the first few bars of which are squashed up together at the beginning of the line, and the last bar of which is stretched far off the right hand side of the page out of view. Then the next 20 or so bars are no where to be seen (probably far off the right hand side of the page) before the system below.
If you dont know what I am talking about, I could provide a screenshot if you request.
I have tried everything to get 8 bars on that particular system; dragging the stretched bar downwards, dragging squashed bars downward, moving bars down 1 by 1, moving bars onto the system above, moving bars away from the system below (to make room for the 4 bars that I want to move from above), adding more bars and dragging them down, but none of these methods have worked. I am either stuck with 12 bars crammed onto one system and 4 bars on the next or an oddly distorted version of the system which cannot possibly be read. Even when I settle with the unsatistactory former, I encounter further problems on subsequent systems below, some systems of which are already distorted.
All I want is to have 8 bars per system, it should not be too much to ask! The layout:global format:maximum-bars-per-line calculation seems to be redundant, even when I reset the default line breaks - it just does not automatically set 8 bars per line, which it should do. Is there not an option to determine bars individually by number onto their respective lines, without having to use the white arrow graphic layout tool?
The problem is extremely frustrating, and it is preventing me from completing, presenting and handing in a score for my university music composition.
I have no other score producing software, and starting it
from scratch on paper is going to take me weeks, because it consists of 830 12/8 bars in 22 parts, and I need to get it ready by next term!
Any help would be extremely helpful and much appreciated, especially a patch or a useful way round. It could be related to memory, or hard drive space, as I have experienced similar problems in the past, where my score has been stretched off the page during a time when I have had little disk space...and this is a very large piece of music which might stretch the score capabilities of Logic.
If so, has anyone got any suggestions?
Thanks!
Rory
eMac Mac OS X (10.4.2)
eMac Mac OS X (10.4.2)

nope just cutting should work.
here are some things to try:
1. try assigning a different score style. for the regions. duplicate and then adjust the default ones if necessary.
2. try creating a new instrument set. in fact delete them and make a new one (use the key command: create instrument set from selected)
3. it may be a formatting problem so check:
in global layout constant spacing (try 8 or 9) and proportional spacing (try 45 or so). then try factory defaults.
4. try copying and pasting the midi into a brand new region and looking at the score for that.
5. try fiddling with the layout tool drqagging bars up or down.
normally simply cutting the region of just one object is enough to force a redraw. maybe try it on all of the regions. what happens when you double click on a region?

Carriage Returns / Line Breaks & PDF

I have a requirement to display a customers address in 1 column of a PDF report.
The address is stored in the RPD as Address1, Address2, etc. etc.
I use the answer of the question "Carriage Returns / Line Breaks" as a basic startup.
( Question Registered the 02/24/10 from user12673225 )
I get a great result in the HTML report.
But, when I print the report in PDF the HTML control codes appear in the PDF report.
e.g.
LTHEA A | P.O. BOX 877 *<br* | KY | VERNON A 100000479 |
VERNON | /> GRAND...........|....|.............................|
...........| CAYMAN.............|....|.............................|
...........| KY1-1103 *<br*......|....|.............................|
...........| /> CAYMAN.........|....|.............................|
...........| ISLANDS.............|....|.............................|
Presently I generate the report in HTML then I convert it in PDF format.
Is there a way to print the report directly in PDF without the html control appearing in clear in the pdf file. Is is possible to do the job in one step only?
Edited by: user9214078 on Feb 24, 2010 11:42 AM

Hi Will,
The [ instead of < does not work.
The character "[" is not recognized as an HTLM control code.
It worth the try.
Thanks
Gilles.

Line Breaks missing in captions from other programs...

I've spent the last few hours searching around, and I've been unable to find any solution to a weird thing I noticed.
I've recently purchased LR 3.4.1 and when I imported a handful of older pics that had had the captions set using Bridge, the line breaks were now gone.
I then went to Bridge and tested it, and sure enough, it can read line breaks from LR, but the opposite doesn't seem to be true. As part of my work, I get a bunch of photos that other photogs have shot and added captions to via Bridge, but I can't seem to find any check box or setting on how to get LR to read the line breaks.
Any one have any advice on how to get LR to read line breaks from other programs? I'd hate to have to go through and re-caption each and every single photo, especially when adding the older ones into LR to use it as a DAM.
Thanks!

This is a long-standing, annoying bug in Windows LR that has been acknowledged by Adobe:
http://feedback.photoshop.com/photoshop_family/topics/newline_bug_in_caption_text
Please go to the feedback site and vote for that issue to get fixed.
It is just a display problem in LR -- the line breaks in the metadata are preserved, and if you enter line breaks in the metadata, they are preserved too.

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

Formula Line Breaks

Similar Messages

Maybe you are looking for