Formula Problem in a Query

Dear Gurus,
Created a formula
M Primary= M1 Sec PlanM(Closing Stock+Intransit)-Mopening Stock
Where MClosing stock= Msecplan*Stocknorms
After applying the formula, i am getting the following output.
Calmonth      Sec Plan norms Closing stock      Opening Stk     MPrimary Plan
08.2007           15.750    45        585                        0              <b>-585.0000</b>
09.2007           14.180    45         0                           0               <b>35.4500</b>
                                                                                Whereas the value i want to display in sept priplan column "549.000"
Any solutions for this kind of issue?
Thanks in advance for all the solution providers
Regards
Hari

Hi,
That is similar to what I have tried with my conditions (I have also tried with formulas as you are suggesting), but I have not been sucessful. Yes, all key figures are zero for the order, but if I do not drill down on order then the qty is not zero anymore and my condition/formula stops working.
The method you suggest could probably solve the "number of orders" problem, but I also have a similar problem with "number of materials" and this is more tricky as we also have the same material for many orders...so my qty can be zero on one order item, but not zero on another so this would require some kind of exception aggregation on both order and item.
Best regards,
Mikael

Similar Messages

Strange problem in a query

Hello all,
I'm facing a non-sense problem in a query, I hope you could help me.
I have defined a structure in the rows of my query. Inside the structure, I have defined several selections and formulas. Selections are basically account intervals and formulas are additions of some selections.
Some formulas are correct, adding amounts properly but others aren't. Instead of the addition, a * appears.
Even if I copy and paste now one correct formula and show both in the execution, the first one appears correctly and the second one shows a *. How is it possible?
I need some suggestions about what to do. Thank you in advance. I will assign points.

Thank you for your answers!
I have followed Mustafa advice in SPRO and now I don't see any *.
But there is a thing I can't understand now. As said before, I created a formula based on selections and it shows correctly the amount and the unit.
Then I have copied the formula and pasted after the first one. Both of them show the same value but only the first one is showing the amount.
What do you think? How is it possible if both have been defined identically?

Problem With The Query

Hi gurus,
I have a problem in a query
I have a lot of records that are the same and I dont want to sum the value of them more than once. How can this be done??
The following table should illustrate my problem:
DEPT--MONTHCFBID----SCORE
ALST--APR100--
3
ALST--MAY100--
3
ALST--JUN101--
4
ALST--APR102--
5
Overall Score 15
I want the Overall Score to be 12. (only summing up unique records Of CFBID).
Any help will be greatly appreciated.
Regards
Supraja.K

Hi,
I had Done with Formula with Excveption Aggregation as Average And reference charecterstic as CFBID
DEPT--MONTHCFBID----SCORE
ALST--APR100--
3
ALST--MAY100--
3
ALST--JUN101--
4
ALST--APR102--
5
Overall Score 15
I want the Average Score12/3 = 4.
but I am getting as 15/3 = 5
What to Do any other Solution please

Problem in Adhoc Query's set operation functionality.

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Formula Created in BI Query appears in Universe as Measure with No Data

Hi,
I have created the universe on top of SAP BI Query(Which is built on Infoset).
There are some formulas created in BI Query as mentioned below:
Eg: Status1=
                    If Completion Code = null then Status1 = 0
                    If Completion Code = =10,11,18 then Status1 = 1
      Status2=
                     If Status1= 1 and Field Completion Date <= Regulatory Due Date then Status 2 = 3
                     If Status1= 0 and Report Date <= Regulatory Due Date then Status 2 = 4
In the Universe I get Status1 and Status2 as Measures.
When I use these Measure Objects in WebI report, I donu2019t see any Data for these objects in WebI Report. Both the columns for Status1 and Status2 appear Blank with no data in it, although I get the data in SAP BI Query for both Status1 and status2.
Is there any issue with the formulas to be used in SAP BI Query?
Are Formulas supported in Business Objects from SAP BI Query?
regards,
Nisha

Hi Ingo,
I tried running the standard test MDX in MDXTEST and I got the data for those calculations.
But I wonder why there is no data in WebI for those formulas(Key Figures)?
In Standard test MDX the MDX Query is as Follows:
SELECT
[Measures].MEMBERS ON COLUMNS,
NON EMPTY [Z_WM_IS01___F98].[LEVEL01].MEMBERS ON ROWS
FROM ZWM_M02/Z_ZWM_M02_Q001 SAP VARIABLES
[!V000001] INCLUDING [Z_WM_IS01___F15].[3]
Based on above Query I created the WebI report which includes the objects as described below:
one Dimension Object Notification Number which is equivalent to [Z_WM_IS01___F98].[LEVEL01].MEMBERS from above query.
Selected All the measures objects available in query which refers to [Measures].MEMBERS
And one Prompt on Region which is equivalent to [!V000001] INCLUDING [Z_WM_IS01___F15].[3]
Why there is no data for Calculation columns (Key Figures Status1 and Status2) in WebI Report???

Problems in SQL Query

Dear All,
I am having some problem in SQL query. I am trying to get total sum of one inventory using the following query it works fine:
sum(case when mt.transaction_quantity > 0 then (mt.transaction_quantity) else 0 end) "TOT_IN"
,sum(case when mt.transaction_quantity >= 0 then 0 else (abs(mt.transaction_quantity)) end) "TOT_OUT"
But when I breakup the total sum into monthly breakup it fails to return the correct some could any one help what is wrong in the following query which is returning incorrect monthly sum. Following is that query. Your help in this regard would highly be appreciated.
sum(case when mt.transaction_quantity > 0 then (decode (floor (floor (to_date('17-MAR-2009')- mt.transaction_date) / 30), 0, mt.transaction_quantity, null)) else 0 end) "MONTH1_IN"
,sum(case when mt.transaction_quantity >= 0 then 0 else (decode (floor (floor (to_date('17-MAR-2009')- mt.transaction_date) / 30), 0, abs(mt.transaction_quantity), null)) end) "MONTH1_OUT"
Thanks

Hi,
Sorry, I don't really understand what you want.
Whenever you have a question, it helps to post:
(1) The version of Oracle (and any other relevant software) you're using
(2) A little sample data (just enough to show what the problem is) from all the relevant tables
(3) The results you want from that data
(4) Your best attempt so far (formatted)
(5) The full error message (if any), including line number
Executable SQL statements (like "CREATE TABLE AS ..." or "INSERT ..." statements) are best for (2).
If you can present your problem using commonly available tables (for example, tables in scott schema, or views in the data dictionary), then you can omit (2).
Formatted tabular output is okay for (3). Type these 6 characters
{code}
(small letters only, inside curly brackets) before and after the tabular text, to preserve spacing.
What exactly do you mean by "monthly breakup"?
If you want separate figures for each calendar month, Blushadow's suggestion (TRUNC (mt.transaction_date, 'MM')) is what you want.
If you want separate figures for the last 30 days before today, then something like what you posted ("FLOOR ((:target_date - mt.transaction_date) / 30)": the extra FLOOR doesn't help any) should work, so if you ran the query on March 17, 2009, the first "month" would be February 16 through March 17.
In a CASE statement, there's rarely any need to use DECODE. The following is equivalent to the last line of code you posted:
,       SUM ( CASE
            WHEN mt.transaction_quantity >= 0
            THEN 0
            WHEN TO_DATE ('17-MAR-2009', 'DD-MON-YYYY') - mt.transaction_date
                    BETWEEN 0
                    AND     29.99999 -- 30 days minus a fraction of a second
            THEN ABS (mt.transaction_quantity)
           END
         )          AS month1_outDon't you find this easier to understand (and debug)?

Problem with a query with a BLOB data type

Hi i've a problem with this query in 11g. R1
SELECT
      LOGTIMESTAMP,
      LOGTIMEMILLIS,
      MSGID,
      XMLTYPE(MESSAGEBODY, nls_charset_id('AL32UTF8')).getClobVal() as LLamada
FROM
    vordel.AUDIT_MESSAGE_PAYLOAD,
    vordel.AUDIT_LOG_POINTS
WHERE
    AUDIT_LOG_POINTS.LOGPOINTSPK = AUDIT_MESSAGE_PAYLOAD.MP_LOGPOINTSPK AND
    LOGTIMESTAMP between TO_TIMESTAMP('03-12-2011 00:00','DD-MM-YYYY HH24:MI') and TO_TIMESTAMP('03-12-2011 12:00','DD-MM-YYYY HH24:MI')
     and filtertype = 'LogMessagePayloadFilter'
and filtername like 'Log Llamada%'MESSAGEBODY: data type of the Column is BLOB
throw this error after execute the query
Error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00200: could not convert from encoding UTF-8 to UCS2
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 283
ORA-06512: at line 1

Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base?

Problem in parameter query.

Post Author: eaglesoft
CA Forum: Data Connectivity and SQL
I'm using Crystal reports xi. I have problem on parameter fields. field name-EmployeeCode, datatype-String.In report,I kept the following query in selection expert,(EmployeeTable.EmployeeCode) like "" +{?employeeCode} employeeCode-String Parameter,(while selecting Single option,it'll display in report that particular employeecode only), like "" (while selecting All option in Jsp page,it'll display All employeecodes from database).Now, I have changed my EmployeeCode datatype as integerfield name-EmployeeCode, datatype-String.In Slection Expert, I'm facing problem on previous query "String required" ,though I kept employeeCode as number.(It should fit for Single and All Option)Pls help me on Previous query with integer datatype.

Post Author: jlspublic
CA Forum: Data Connectivity and SQL
It appears that your problem comes from using "+" as the concatenation operator. From the documentation for this operator:If you want to include a value from a numeric field (for example, an account
balance), you must first convert that value to a text string using the ToText function:
"Your account balance is " + ToText({file.BALANCE}) + "."
Instead of casting, you could also switch to the "&" concatenation operator which gives the added benefit of avoiding subtle bugs when attempting to concatenate strings of numbers.

Problem in xml query

Hi
I am working on BLS and having problem in xml query.I want to perform some calculation over xml columns.Than total of this as a new column.I can do this part in logic editor itself but can i do these both task by XSLT.
Can be made our own XSLT for this ?
I am feeling kind of fear to xslt. Can anybody help me in this.
Thanks a lot in advance
thomas

Ram,
In xMII there is a list of predefined xslt transforms that do something similar to what you are explaining. The 3 that I think may be what you are looking for are
they are under Calculation Transformations and Subtotal Transformation take a look at these and tell me if they are doing what you want to accomplish. In the xMII help file do a search on Inline Transforms or navigate to Advanced Topics -> Inline Transforms -> Predefined Inline Transforms. In this section there are examples of how to use these transforms and apply them in the query templates. If this is not what you are looking for can you explain in a little more detail along with a simple example of how you want this transform to work. Also why do you want to use xslt if you can already accomplish this in BLS?
Regards,
Erik

Navigational Attribute Problem in Input Query

Hi,
I am having a problem in input query implementation which uses a navigational attribute. I have, for eg, only one char 'customer' in rows; i want to exclude the customers with the status D (deleted) from displaying (Status is nav. attr. of customer). I tried this by restricting in filter, Status D-"exclude". But as soon as I do this, query no longer remains input ready! (I also tried putting the same restriction in Default Values area rather than Filter, but ended with the same result )
I discovered that if, furthermore, I put Status in rows (with the above said restriction still remaining), query is again input ready.
Can't we exclude values in the filter on an input query? I want to know if this is a restriction with IP or a bug?

Hi Gregor,
Thanks for the explanation. But this makes me wonder, because due to this restriction one of the BIG advantages queries had over the planning layouts of BPS, seems to be gone. I mean, using navigational attributes for filtering; if we have to always have a single value restriction on a nav. attr., this will really be restricting. Is it expected that this will be changed in a later SP?
And there is another problem that is coming due to this. When I use the exclude filter and also the nav. attr. Status in rows, then the query becomes input ready, but there are warning messges displaying when the query opens saying -
Characteristic Customer has no master data for "C1"
Characteristic Customer has no master data for "C2"
etc... (these are the customers with status D). We are on SP15.
Please suggest what should I do to get rid of these messages?
Edited by: Mayank Gupta on Apr 10, 2008

Problem in update Query of MySQL

Hi
I have a large amounts of records in a teble & i want to update the records in a particular condition but it takes time in updating.
I have also used batch update but it's also not going to solve my problem.
can anyone help what should i do to frequently update in a large amount of data.
I am using MySQL along with core java.

It's not a Java question but more of a database profiling question. Try to post your description of the problem and the query in a MySQL forum.
Kaj

Problem with Hierarchical query

Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
Regards

You do not say anything about what count you want to get?
A wild guess could be:
select
   sys_connect_by_path (p1.fname, '/') "PATH",
   p1.fname,
   p1.id,
   level,
   (select count (id) - 1
    from
       (select connect_by_root p2.lname lname, p2.id
        from cmt_person p2
        start with p2.id = p1.id
        connect by prior p2.id = p2.manager_id)
    ) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...)

Problem with af:query

Hi,
I have a problem with af:query. Here's what I do:
1. create a VO, define view criteria
2. drag and drop view criteria from data controls to an empty form, choosing query and table
3. When I run the page and click any of the buttons, I get: "Because of inactivity, your session has timed out and is no longer active...."
I see no exceptions in output window. What am I doing wrong?
Here is my view defenition:
<?xml version="1.0" encoding="windows-1250" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="EmployeesView"
Version="11.1.1.49.49"
SelectList="Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.EMAIL,
Employees.PHONE_NUMBER,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.SALARY,
Employees.COMMISSION_PCT,
Employees.MANAGER_ID,
Employees.DEPARTMENT_ID"
FromList="EMPLOYEES Employees"
BindingStyle="OracleName"
CustomQuery="false"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access|VarAccess"/>
</DesignTime>
<Variable
Name="firstName"
Kind="viewcriteria"
Type="java.lang.String"
DefaultValue="0"/>
<EntityUsage
Name="Employees"
Entity="project3.Employees"
JoinType="INNER JOIN"/>
<ViewAttribute
Name="EmployeeId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="EmployeeId"
EntityUsage="Employees"
AliasName="EMPLOYEE_ID"/>
<ViewAttribute
Name="FirstName"
PrecisionRule="true"
EntityAttrName="FirstName"
EntityUsage="Employees"
AliasName="FIRST_NAME"/>
<ViewAttribute
Name="LastName"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="LastName"
EntityUsage="Employees"
AliasName="LAST_NAME"/>
<ViewAttribute
Name="Email"
IsUnique="true"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="Email"
EntityUsage="Employees"
AliasName="EMAIL"/>
<ViewAttribute
Name="PhoneNumber"
PrecisionRule="true"
EntityAttrName="PhoneNumber"
EntityUsage="Employees"
AliasName="PHONE_NUMBER"/>
<ViewAttribute
Name="HireDate"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="HireDate"
EntityUsage="Employees"
AliasName="HIRE_DATE"/>
<ViewAttribute
Name="JobId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="JobId"
EntityUsage="Employees"
AliasName="JOB_ID"/>
<ViewAttribute
Name="Salary"
PrecisionRule="true"
EntityAttrName="Salary"
EntityUsage="Employees"
AliasName="SALARY"/>
<ViewAttribute
Name="CommissionPct"
PrecisionRule="true"
EntityAttrName="CommissionPct"
EntityUsage="Employees"
AliasName="COMMISSION_PCT"/>
<ViewAttribute
Name="ManagerId"
PrecisionRule="true"
EntityAttrName="ManagerId"
EntityUsage="Employees"
AliasName="MANAGER_ID"/>
<ViewAttribute
Name="DepartmentId"
PrecisionRule="true"
EntityAttrName="DepartmentId"
EntityUsage="Employees"
AliasName="DEPARTMENT_ID"/>
<ViewCriteria
Name="EmployeesViewCriteria"
ViewObjectName="project3.EmployeesView"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="mode"
Value="Basic"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="autoExecute"
Value="false"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow24"
UpperColumns="1">
<ViewCriteriaItem
Name="FirstName"
ViewAttribute="FirstName"
Operator="STARTSWITH"
Conjunction="AND"
UpperColumns="0"
Required="Optional">
<ViewCriteriaItemValue
Name="EmployeesViewCriteria_vcrow24_EmployeeId_vcval0"
Value=":firstName"
IsBindVarValue="true"/>
</ViewCriteriaItem>
</ViewCriteriaRow>
</ViewCriteria>
<ViewLinkAccessor
Name="EmployeesView"
ViewLink="project3.EmpManagerFkLink"
Type="oracle.jbo.RowIterator"
IsUpdateable="false"/>
</ViewObject>
And JSF page:
<af:panelGroupLayout layout="vertical">
<af:panelHeader text="Employees">
<af:query id="employeesViewCriteriaQueryId" headerText="Search"
disclosed="true"
resultComponentId="employeesViewCriteriaQueryResultId"
value="#{bindings.EmployeesViewCriteriaQuery.queryDescriptor}"
model="#{bindings.EmployeesViewCriteriaQuery.queryModel}"
queryListener="#{bindings.EmployeesViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.EmployeesViewCriteriaQuery.processQueryOperation}"/>
</af:panelHeader>
<af:table value="#{bindings.EmployeesView1.collectionModel}" var="row"
rows="#{bindings.EmployeesView1.rangeSize}"
emptyText="#{bindings.EmployeesView1.viewable ? 'No rows yet.' : 'Access Denied.'}"
fetchSize="#{bindings.EmployeesView1.rangeSize}"
id="employeesViewCriteriaQueryResultId">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.EmployeesView1.hints.EmployeeId.label}">
<af:outputText value="#{row.EmployeeId}">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmployeesView1.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.FirstName.label}">
<af:outputText value="#{row.FirstName}"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.LastName.label}">
<af:outputText value="#{row.LastName}"/>
</af:column>
</af:table>
</af:panelGroupLayout>
Regards
Jernej
Message was edited by:
Jernej Kase

It also seems that quick queries don't work with SQL92 sqlBuilder.
I get the following error:
Messages for this page are listed below.
Error
SQL error during statement preparation. Statement: SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.EMAIL, Employees.PHONE_NUMBER, Employees.HIRE_DATE, Employees.JOB_ID, Employees.SALARY, Employees.COMMISSION_PCT, Employees.MANAGER_ID, Employees.DEPARTMENT_ID FROM EMPLOYEES Employees WHERE (( ( ( UPPER(Employees.FIRST_NAME) LIKE UPPER(:vc_temp_1) ) OR ( ? IS NULL ) ) ) )
Error
Missing IN or OUT parameter at index:: 2
Is this a bug or this doesn't work by design?
Edit: and if I create named query I get the following error:
Caused by: oracle.jbo.NoDefException: JBO-25058: Definition fn of type Attribute not found in EmployeesView1
     at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:5634)
     at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.getQuickSearchVC(JUSearchBindingCustomizer.java:847)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
     ... 47 more
I think just ran out of options...
Message was edited by:
Jernej Kase

Problem with update-query

Hallo,
i have a problem with following query. I wanna update the columns in the nutzung table. There are 7 columns but my query updates the geometry that in all columns is the same geometry or I can not update because the query gives more than 1 row in the subquery.
update nutzung
set geometrie=(SELECT F1840_GEOM FROM UG_F1840_GEOM,Nutzung WHERE NUTZUNG.OBJNR=UG_F1840_GEOM.F1840_OBJNR AND GETFEATUREID(UG_F1840_GEOM.F1840_FID) IN(SELECT MSLINK FROM FEATURE WHERE FCODE like '%0000'));
Maybe I need the ug_f1840_geom table in the update query. Don't know how to change the query.
Regards, Katrin

hi it's me again .I am getting error for this
statement
if(numOfUsers>0)
stmt.executeUpdate("update defaultchatrooms set
s set nodename =
'"+chatTopic+"'('"+numOfUsers+"')'");
1. Your update string looks like this:
update defaultchatrooms set nodename = 'someChatTopic'('0')'
Does that look right to you?
2. This will update the column nodename in every row in the table defaultchatrooms. Aren't you missing a "where" condition?

Problem with jump query

Hello ,
iam having problem with jump query when i execute the web report but the same jump query is working fine in Bex analyzer.i think there are some settings need to be done in SAP WAS for web report. if it so can anybody tell me how to maintain these settings so that i can execute the my web report.
Regards
Komal

Hi Komal,
What is the problem you are facing while executing the report.
Are you working on WAD? Explain clearly about your problem you are facing.
Regards,
KK.

Formula Problem in a Query

Similar Messages

Maybe you are looking for