Formula Result not showing proper result

Hi friends,
We have a scenario where if the total is <= 7 then then result *1 and if result >0 then result 0.
Below is the actual scenario if closed with in <= 7 then result  is (closed with in 7 <= 7)*1 or else 0.  For calculating closed with in <= 7 we used selection and then included this selection in formula. but we don't have any closed with in 7 <= 0 even the result is showing 1. but in the selection its showing 0. please help me out

Hi Suman,
Thank you for the reply, yes this is the way im expecting the output. In the screenshot that I have attached  Closed with in 7 days(RKF) is a selection. Using this selection I created a  Closed with in 7 days(formula). The RKF is giving the correct result individually, but wrong result as 1 in Formula.  I request you to please let me know the correct formula that can be included.

Similar Messages

  • I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
    Mylenium

  • Formulation outputs not showing in search results

    The FOs are not showing up in any EQT search screens, show hidden specs setting is on. In the past, we've noticed that the specs show up if we put an extra dummy tag on the wfa statuses that have 7 tags. This is not working anymore.
    please refer to 3 SR 3-5797044111 : WFA Tag Config and EQT Visibility Issue

    I just discovered that if the formulation output doesn't have any entries in the cross reference section, it will not appear in eqt search results. does this make sense? Is there some config that we can adjust to make them apper even without a cross reference?
    thanks,
    David

  • Report not showing proper output in apps 11i

    Hi,
    I am new to oracle Apps 11i. I Have created customized reports . But Layout showing in builder and oracle apps 11i are different. The differernce is distance between the fields. Also labels and fields not showing full (truncating) value. But the same report giving proper output in repots6i builder.
    (i.e all customized reports layout showing 1/2 the width in oracle apps 11i)
    I will appreciate if somebody can give me some suggetion regarding this issue. Also I would like to know any template avaliable for 11i reports development.
    Regards

    hi,
    please make sure that in report builder fields must not contain any bold text , any line or any color b'coz apps11i reports are character mode reports hence if ur report contain any of these mentioned above give format different from the one it shows in report builder. u have to add one by one field and and run the report in apps environment .. in this way u have to move forward... guess it will help u....

  • 3750 not showing proper traffic statistics

    A colleague of mine has a 3750 switch which he is doing routing on.
    He has noticed that traffic statistics are not showing using 'show interface vlan x' or using MRTG graphing.
    Any way to get these statistics back ? I've never seen the behaviour myself so I thought I'd ask for him.
    Thanks,
    = K

    Sounds like you are getting some data, jut not performance data(?) so I would not suspect the agent.
    Check your binaries on the agent - you should have 2 or 3 with root permissions and the sticky bit turned on.
    Make sure you have the new port numbers being used since the agent should now be connecting via the secure port (this looks to already be the case from your post)
    Hit the url from the web browser:
    https://<agent-host>:1830/emd/main
    Any firewalls between you and the oms?
    Does the agent know the oms dns/ip?

  • Elapsed-Time Meters not showing proper time in spreadsheet.

    Using Lookout 6.1
    A couple of different issues.
    I am using ETM to record pump run hours.  This part works very well.
    Where I run into problems is when I use a spreadsheet to record the values. 
    In the Spreadsheet1 object I set the ETM1 format to HH:MM and yet in the 'Spreadsheet1.csv ' pump 1 shows 2015:12:55 (Hours are right) but I don't understand why it will not transfer just HH:MM.  Yet in the same Spreadsheet1 object I take another ETM2 and set the format to HH:MM it shows 52365:45 (Hours are right).
    I then use Spreadsheet2 to grab the data once a month to record daily pump hours.
    However if I try and and do any math formulas with ETM2 they do not work.  (Formats are set HH:MM)
    The ETM1 formulas work and takes the raw data 2015:12:55 and formats to HH:MM.
    Does it stop working because the ETM reaches a too high number? 
    Side note: If I create a new ETM can I input hours somehow to reflect exsisting run hours?

    I would suggest using SQL & ODBC to get the runtime hours based on your digital monitor, instead of the ETM timer.
    http://zone.ni.com/devzone/cda/epd/p/id/2001
    Good luck.
    Mike
    Forshock - Consult.Develop.Solve.

  • SYSDATE not showing proper date

    Hi,
    am using sysdate in my procedure. but sysdate is returning the previous day date and I checked the date set in my computer, its proper. I really don't know why sysdate is showing previous date. Plz can anybody tell me what's going wrong here...

    The NTP (network time protocol) daemon on the Oracle server is either not running, or configured incorrectly.
    You need to raise this problem with the o/s administrator of that server. The Oracle database instance uses the o/s date and time. The Oracle database has no control and no idea whether what the o/s reports the date time to be, to be correct or not. Keeping date and time is the o/s's responsilbility - not Oracle's.
    And at o/s level, this is managed via syncing the o/s date and time with servers that are tasked (amongst other things), to keep accurate time. In order to perform this sync, NTP is used. A local NTP daemon (background server process) needs to be configured and activated in order to perform this sync.
    You will find a similar NTP daemon on your client platform (Windows?) that is sync'ing with the time servers on your network.

  • Uvesafb not showing proper resolutions

    I'm trying to get uvesafb to work, however, it does not list the proper resolution for my monitor:
    I have a 1080p monitor that is capiable of 1920x1080-32
    $ cat /sys/bus/platform/drivers/uvesafb/uvesafb.0/vbe_modes
    640x400-8, 0x0100
    640x480-8, 0x0101
    800x600-8, 0x0103
    1024x768-8, 0x0105
    1280x1024-8, 0x0107
    320x200-16, 0x010e
    320x200-32, 0x010f
    640x480-16, 0x0111
    640x480-32, 0x0112
    800x600-16, 0x0114
    800x600-32, 0x0115
    1024x768-16, 0x0117
    1024x768-32, 0x0118
    1280x1024-16, 0x011a
    1280x1024-32, 0x011b
    320x200-8, 0x0130
    320x400-8, 0x0131
    320x400-16, 0x0132
    320x400-32, 0x0133
    320x240-8, 0x0134
    320x240-16, 0x0135
    320x240-32, 0x0136
    640x400-16, 0x013d
    640x400-32, 0x013e
    1600x1200-8, 0x0145
    1600x1200-16, 0x0146
    1400x1050-8, 0x0147
    1400x1050-16, 0x0148
    2048x1536-32, 0x0152
    any ideas on how i can get the proper or even any 16:9 resolutions?
    Thanks!
    Last edited by adambot (2012-10-24 17:33:06)

    Gusar wrote:You don't. You can only use what's in the vbios of your graphic card. If the resolution you want isn't in there, you're out of luck.
    that was my suspicion.  thanks for confirming
    One last question -- what about using something like the 915resolution hack?
    Last edited by adambot (2012-10-24 17:32:52)

  • Why not showing proper remaing HD space?

    I was using my mac and I checked the HD space and it said 28GB remaining and then 5min later without me adding any other files it told me 22GB was remaining.
    Why did it show inaccurate display space remaining?
    Thanks.
    Dorian

    Apple's built in search tools (Find or Spotlight) can search by modification dates. But that's really not the most efficient way to do a backup.
    I'd recommend SuperDuper for that. The free version clones to an external drive, the $28 licensed version performs "SmartUpdates" (incremental backups that are faster becuase they synchronize changed files only).
    http://www.shirt-pocket.com/SuperDuper/
    EDIT: Wow, I'm faster with my fingers than usual in this thread!

  • Dvt bargraph not showing proper data on x axis

    hi,
    I am using a <dvt:barGraph> on my jsff page. It reads data from the viewObject. On x axis, i have set the values as date. For the very first bar, it displays the date correctly in format 'dd-month-yyyy' but for all the subsequent bars, it just shows the date i.E. just 'dd'.
    can anyone help plz?
    code:
    <dvt:barGraph id="graph1" value="#{bindings.viewObject11.graphModel}" subType="BAR_VERT_STACK"
    inlineStyle="height:160px; width:100%;" seriesEffect="SE_GRADIENT"
    seriesRolloverBehavior="RB_HIGHLIGHT" threeDEffect="true"
    contentDelivery="immediate" imageFormat="PNG" >
    <dvt:background>
    <dvt:specialEffects/>
    </dvt:background>
    <dvt:graphPlotArea/>
    <dvt:seriesSet>
    <dvt:series/>
    </dvt:seriesSet>
    <dvt:o1Axis/>
    <dvt:y1Axis />
    <dvt:legendArea automaticPlacement="AP_NEVER"/>
    </dvt:barGraph>
    jdev version:11.1.1.4.0
    Edited by: user12333779 on Feb 10, 2012 9:30 PM

    Hi Abhishek,
    For your questions, please check the listed items as below:
    1. The Cumulative Flow Diagram shows the flow of the items on your backlog, and it will only show the last 30 weeks of data. You can check the links below for more information about cumulative flow diagram:
    http://blogs.msdn.com/b/visualstudioalm/archive/2006/01/12/511845.aspx
    http://adiws.blogspot.com/2012/04/scrum-for-team-system-product.html
    2. If you want to check the work item status work items in a particular period, seems it's not available for TFS 2012. You can use work item query with start date and finish date and then create a chart by the query if you use TFS 2013 Update 2 or above.
    Check this page
    for more information. 
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • XENPAK-10GB-LR+ not showing Proper product ID

    Hi Experts ,
    We have replaced exsisting "XENPAK-10GB-LR" with new "XENPAK-10GB-LR+" but when I see show inventory it shows a weird PID.
    Switch showing incorrect PID :IOS"s3223-ipbase_wan-mz.122-18.SXF2.bin"
    Switch1#
    NAME: "Te5/1", DESCR: "10Gbase-LR"
    PID: FTLX1461E2-CS     , VID:    , SN: xxx
    NAME: "Te6/1", DESCR: "10Gbase-LR"
    PID: TRE5024EN-SWC     , VID:    , SN: xxx
    Switch showing CORRECT PID :IOS"s3223-ipbasek9-mz.122-33.SXJ5.bin"
    NAME: "Transceiver Te5/1", DESCR: "Xenpak Transceiver 10Gbase-LR Te5/1"
    PID: XENPAK-10GB-LR+   ,                     VID: V01 , SN: xxxx
    NAME: "Transceiver Te6/1", DESCR: "Xenpak Transceiver 10Gbase-LR Te6/1"
    PID: XENPAK-10GB-LR+   ,                     VID: V01 , SN: xxxx
    Both Switches have same SUP "WS-SUP32-10GE-3B" only difference I see is IOS ,but I am not finding any documentation that says IOS is causing the switch to show incorrect Product ID .
    Services are working fine.

    Sounds like you are getting some data, jut not performance data(?) so I would not suspect the agent.
    Check your binaries on the agent - you should have 2 or 3 with root permissions and the sticky bit turned on.
    Make sure you have the new port numbers being used since the agent should now be connecting via the secure port (this looks to already be the case from your post)
    Hit the url from the web browser:
    https://<agent-host>:1830/emd/main
    Any firewalls between you and the oms?
    Does the agent know the oms dns/ip?

  • Disk quota not showing proper

    i have a problem with 10.4 server which is installed on a powermac G5 2.5 Ghz System.
    I have created users on the internal volume and have enabled disk quota on it.. i have given 30 gb for each users and totally i have created 3 users..
    and when i access these users from the network, first time it shows the total volume availabe (my Hdd is 250 Gb) and when i restart the machine am getting only 2 gb as available volume space through the network..
    I have tried updating to 10.4.5, still problem persist
    Acctually i found the problem as the disk quota is not allocating space more than 2 Gb for all users.
    can anyone help me in this

    Yes I've noticed this bug too. I think its a bug in Workgroup Manager or the command line programs WGM calls. If you use the edquota command to set disk quotas you can set them to what every you like.

  • SQL*plus not showing proper value.

    Hi All,
    In one of the database, while quering in sql developer data is showing data as "PüSS", but when trying sqlplus (client and server), its showing as "Puss", but the actual value is "PüSS". Oracle verion 10.2.0.4 and Linux.
    SQL> select sys_context('userenv','language') from dual;
    SYS_CONTEXT('USERENV','LANGUAGE')
    AMERICAN_AMERICA.WE8ISO8859P1
    In server .profile and oraenv there is no nls_lang, same for sql developer. Please help to get the correct data in sqlplus, because i need to manupulate few records in jobs.
    Thanks,
    Prasanna.

    it must be something I'm doing wrong, above, I was running under windows 7 pointing at the version above.
    I just tried it under an Enterprise Linux pointing at
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production          
    PL/SQL Release 11.2.0.2.0 - Production                                          
    CORE     11.2.0.2.0     Production                                                        
    TNS for Linux: Version 11.2.0.2.0 - Production                                  
    NLSRTL Version 11.2.0.2.0 - Production                                           and I get exactly the same script output and no compiler window....
    actually...... if I go into a procedure window from the schema browser and compile it there, then I get the correct warning messages..... the problem is I mostly develop from .sql files extracted from source control rather than directly from the schema browser, I just want the sql worksheet to be able to show me the same compiler log window.....

  • S_PL0_86000030 not  showing proper display

    S_PL0_86000030 display get change
    balance c/f to Accumulated balance there are 7 columns
    but now showing  only three columns  1)debit bal 2)credit bal 3) accumulated bal.   
    how do i get all seven columns?

    Hi
    When you run the Transaction: S_PL0_86000030.. at the bottom of the Selection Screen you have 3 Option for Output Type:
    1.Graphical Report Output
    2.Classical Drilldown report
    3.Object list
    You can choose Graphical Report Output or Object List and then run the report.In the report screen click the Change Layout button and in the pop-up screen you can select the desired column fields you need and drag it on the left.This will give you the desired output you need.
    If you wanted it to be your default layout then save it and use it whenever you run the Transaction.
    Regards
    Andrew

  • 10.4 server disk quota not showing proper available space

    i have a problem with 10.4 server which is installed on a powermac G5 2.5 Ghz System.
    I have created users on the internal volume and have enabled disk quota on it.. i have given 30 gb for each users and totally i have created 3 users..
    and when i access these users from the network, first time it shows the total volume availabe (my Hdd is 250 Gb) and when i restart the machine am getting only 2 gb as available volume space through the network..
    I have tried updating to 10.4.5, still problem persist
    can anyone help me in this
    PM G5 2.5 Ghz   Mac OS X (10.4.5)  

    As you may have noticed, this bug should have been fixed with the 10.4.6 Server update!
    More info about the update:
    http://docs.info.apple.com/article.html?artnum=303160

Maybe you are looking for