Formula: what are real time formula we use in SAP BW/BI?

Can any one guide me , what the formula's, mostly used in real time?

Hi,
It is not fixed to use the respective formulas, as per the requirement we build the respective formulas. At some times if the requirement satisfies the BI Content, then we will use the content formulas
Hope this helps u a lot.........
Assigning points is the way of saying Thanks in SDN
Regards
Ramakrishna Kamurthy.

Similar Messages

  • What are the major risks buying used lenses ?

    i just bought my first dslr,  and i was wondering what are the major risks buying used lenses ?

    You need to be able to inspect and test the lens.
    Look for obvious signs of physical damage, drops, etc. (cracks, dents, etc.)  A lens normally will get some signs of wear but as it's a used lens, you expect *some* wear... you're really looking for signs of damage.
    Remove both front and rear caps.  Look through the lens into a bright no-contrast background (a white wall, a blue sky, etc.) and check the optics.  You're looking for signs of mold growth or damage to coatings.  Minor dust on internal optics wont impact the lens performance... so while you wouldn't want major amounts of dirt... don't worry too much about minor bits of dust (I've actually helped prove this to someone by clipping a 3M PostIt note down to a tiny 1/4" x 1/4" size and sticking it on the front glass.  Take a photo... nothing shows in the photo (even a piece of "dirt" that big wont show because the camera cannot focus on anything that close to the lens.)  
    Rotate the focus ring from end to end.  You should feel a smooth and consistent amount of friction as you rotate the focus ring.  There should be no rough spots.  Listen to the lens as you do this... there should be no grinding noises.
    Do the same with the zoom ring but in addition to checking for smooth consistent performance (no sticky or rough spots) you're also checking to make sure nothing seems excessively worn (nothing wobbles loose... very heavily used lenses can do that after enough wear.)
    Connect the lens to the camera and make sure the camera can completely operate the auto-focus motors without a problem and/or if it's an image stabilized lens that the IS components are working.
    Set the camera to max aperture (e.g. f/22, f/32.. depending on the lens) and press your camera's "depth of field preview" button (if you don't know which button is your DOF preview, check your manual.  Canon tends to move that one around a bit but it's almost always on the front side of the camera near the lens mount.)  You want to press and release it a few times.  This will cause the lens aperture blades to stop down to the aperture you set.  Release... do this while watching the lens.  You should see the aperture blades move in and out (well... they snap in and out very quickly).  You want to make sure it works ok, the camera gets no error codes, and there's no signs that anything is sticking.
    And then there is the focus test... 
    Focus the camera preferably at a FLAT surface that has lots of detail.... such as the brick wall of a building.  Make sure the camera is level and that the camera's focal plane is parallel to the plane of the wall.  Take a test photo at low f-stop and inspect.  You're checking to verify that the focus works and that the focus is reasonable across the image.   As you inspect from left ot right and top to bottom you are looking to make sure the focus is more or less equal (if the right side of the image is focused... but the left side of the image is soft... it would indicate that lens elements are skewed (lens isn't collimated).  It's difficult for a lens to get into this situation unless it was dropped and you'd probably see signs of damage.  
    Tim Campbell
    5D II, 5D III, 60Da

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all,
    What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    Help will be surely rewarded.
    Thanks and Regards,
    Creasy

    > What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
    > Help will be surely rewarded.
    &********************** Please read "the rules" if found usefull... ************************&
    Cheers,
    Julius

  • What are the common APIs we use in oracle interface

    What are the common APIs we use in oracle interface,and any APIs are there for validation Of data During Tranfer to interface table.
    How to find Api s in oracle applications in Individual modules

    For 11i, all public APIS are listed at http://irep.oracle.com
    For R12, use the "Integration Repository" responsibility in your R12 instance to list the APIs available in that instance
    HTH
    Srini

  • What are the possibilities sending notifications using TTY

    What are the possibilities sending notifications using TTY? And how to integrate TTY with Siebel

    Here are the possibilities of Content search webparts
    http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
    http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
    Compare the strengths and limitations of the Web Parts
    It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
    world, here’s how you can decide between the two:
    Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
    Use the CSWP in all other scenarios when you want to show content that is based on a query.
    The table below gives a comparison of the two Web Parts:
    Web Part behavior
    Content Query Web Part
    Content Search Web Part
    Query configuration
    Easy
    You’ll need to know about certain search features such as
    managed properties.
    Query across large amounts of content
    Limited
    Yes
    Handle complex queries
    Limited
    Yes
    Scale to handle future content growth
    Limited
    Yes
    Display content from other site collections
    No
    Yes (see
    section below)
    Design of query results can be customized
    Yes, by using XSLT.
    Yes, by using HTML.
    Maintenance cost in a complex site architecture
    High
    Small (see
    section below)
    Narrow down the query results that are displayed in the Web Part
    No
    Yes, in combination with the
    Refinement Web Part.
    It was not there previously but then it was added to Office 365
    http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
    If this helped you resolve your issue, please mark it Answered

  • What are the advantages/disadvantages of using PS/CS5 in 64bit over 32bit please?

    What are the advantages/disadvantages of using PS/CS5 in 64bit over 32bit please?

    From a practical perspective, besides the 64 bit version being a bit faster at just about everything, limitations on document size are lifted in the 64 bit version.  Essentially, how much can do is limited only by how much RAM you have installed in your system.  You can do things like have larger documents, deeper history, etc. and have it all work quickly.
    On the other hand, many 3rd party plug-ins, especially older ones, only provide 32 bit versions, which will only run in 32 bit Photoshop.
    Both 32 and 64 bit versions are installed by default.  It's important to note that most of the preferences are separate between the two, so you can have two slightly different setups that might help with specialty operations you might need.  This gets pretty subtle, but for example I keep the 32 bit version configured with only 1 cache level, so all previews of high bit depth images are always composited in high bit depth.  This aids me with some aspects of astroimage processing.  It's slower, but more accurate.  By contrast I have more cache levels configured for my 64 bit version, so that's faster for general photography work.
    -Noel

  • What are the things to be tested in sap xi server before going to use th

    1) what are the things to be tested in sap xi server before going to impliment first interface?
    2)what are prerequisites to be configured in xi server before implementing first interface?
    ragards

    Hi Dhanush,
    >>>>><i>1) what are the things to be tested in sap xi server before going to implement first interface?</i>
    >>>>><i>2)what are prerequisites to be configured in xi server before implementing first interface?</i>
    For both of your question the answer would be
    1. Check all the Post installation configuration has been done properly, with the help of the following links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    2. Make sure the latest BASIS Component have been imported into your design time environment
    After this you can start  developing your first interface
    Regards
    Ramesh P

  • Firefox has many versions, what are the 10 most widely used versions?

    Firefox has lots of versions, what are the 10 most widely used versions currently?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)

    http://www.w3schools.com/browsers/browsers_firefox.asp

  • What are the important standard table use in FI/CO module?

    What are the important standard table use in FI/CO module?
    Moderator Message: Please avoid asking such queries.
    Edited by: kishan P on Jan 24, 2012 12:37 PM

    Hi Sanj,
    Please go through the available information and then you can ask if there is any queries.
    [Google|http://www.google.co.in/search?sourceid=chrome&ie=UTF-8&q=importanttablesinficoin+sap]
    Regards,
    Madhu.

  • What are function 'BDC_OPEN_GROUP' / 'BDC_INSERT' / 'BDC_CLOSE_GROUP' used

    Hi all:
    What  are Function 'BDC_OPEN_GROUP' / 'BDC_INSERT' / 'BDC_CLOSE_GROUP' used  for,when I write BDC code.
    Thanksss.
    qimingxing

    Hi Firend,
    BDC_OPEN_GROUP function module is used to create a new session.
    Check this link for complete information on BDC_OPEN_GROUP:
    http://help.sap.com/saphelp_40b/helpdata/en/fa/097126543b11d1898e0000e8322d00/content.htm
    BDC_INSERT function module to add a transaction to a batch input session.
    Check this link for BDC_INSERT:
    http://help.sap.com/saphelp_sm32/helpdata/en/fa/097133543b11d1898e0000e8322d00/content.htm
    BDC_CLOSE_GROUP function module is used to close a session after you have inserted all of your batch input data into it.
    Check this link for BDC_CLOSE_GROUP:
    http://help.sap.com/saphelp_40b/helpdata/en/fa/097140543b11d1898e0000e8322d00/content.htm
    Hope this helps you.
    Regards,
    Chandra Sekhar

  • Dear All,what are the major issues in implementation in sap hcm

    what are the major issues in implementation in SAP HCM project scope is PA ,OM,TIME, INDIA PAYROLL

    Hi Ramjan,
    Try to have a clear understanding of requirements and find the best solution in SAP. Keep as much as possible everything standard and based on SAP best practices.
    In PA look for a comprehensive enterprise structure. It's base for everything.
    DON"T do anything through development(ABAP code) as much as possible specially in PT and PY. Try to do claculation by PCRs and Schema.
    Regards,
    Omid

  • What are the minimum hardware Server requirement for SAP BI BO

    I would be thankful if someone can please tell me  What are the minimum hardware Server requirement for SAP BI BO. if a separate Desktop is used for the server or local server purpose.
    In the Desktop
    I have 8 GB RAM
    2.60 Ghz Processor ( CPU)
    System type: 64 bit OS
    regards
    ranendra

    Hi,
    Refer the attached PAM for BO 4.0 and 4.1.Minimum hardware details are listed there.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&overridelayout=true&58879706677537
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
    I haven't try with your similar specification but  in the below link some one tried with similiar one.
    What are the minimum system requirements to install SAP BO 4.0/4.1
    Amit

  • What are the kind of devices supported by SAP Mobile infrastructure?

    Hi All,
    What are the kind of devices supported by SAP Mobile infrastructure? Is there any document regarding this. Please provide your comments.
    Regards
    George

    Hi George,
    Refer this links. May be it would help you!
    Mobile Device Support in SAP MI
    FAQ from MDK
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cc489997-0901-0010-b3a3-c27a7208e20a#q-4-1
    Hope this helps to some extent.
    Best Regards,
    Lakshmi

  • What are diiferent sector / industry going to implement sap ?

    what are diiferent sector/ industry going to implement sap ?

    Dear deva
    You have posted several questions and almost all the questions are flowing twice but with little change in subject.  Please dont do this.
    Thanks
    G. Lakshmipathi

  • What are the idoc to send data from sap hr to sap fi

    what are the idoc to send data from sap hr to sap fi

    Message type of IDoc depends on the data you wish to send.
    please detail on the data that you need to send in the IDocs.
    regards,
    Nitin

Maybe you are looking for

  • Family Sharing, iTunes Account NOT Apple ID

    I'd like to turn on Family Sharing. However, it seems the only way to turn on Family Sharing is through my Apple ID on my iOS device Settings > iCloud > Family Sharing The issue I have is that my iTunes and App Store purchases are not using my Apple

  • Please help if you can, my user ID will not log on and it has all my data in it.

    The primary user ID (an admin ID with all the valuable info I need access to) will not log on from a restart or initial power up. I was able to go into another user admin ID once and change its password which got me in once but now no passcodes will

  • Recommendations for new mobo using AMD processor

    I am still successfully using my current computer built in 2008 with a K9A2 Platinum mobo. It has been a remarkably reliable mobo with literally no major problems over the years and the mobo has been easily expandable to whatever desktop hardware I h

  • Transport of infoset Query through Report RSAQR3TR

    Dear Hcm Gurus I have created query through sq01 and change functional area sq02 as per requirement in this query i have created additional fields in infoset in which i also assigned abap field code on newly created  data fields i also assigned new d

  • Server 2012 R2 support in SHarePoint 2013

    When 2012 R2 is released will SharePoint 2013 be able to run on it? i've seen there are issues with Preview currently....my server admins would rather build machines in r2 for long term but asked my preference.