Formulas in report painter - form

Hello,
does anyone know where I can add some formula components in KE35? I want to add some components to calculate new formulas.
thanks a lot!
David

Hi,
Good morning and greetings,
In KE35 click on Extras Menu > Report Parameters > Click on Display Form
For example in Net Revenue line double click to define the formula for the same.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

  • Unable to create a report painter form (Message no. KH205).

    Dear all,
    I am trying to create a report painter form, but the system gives an error:
    Key figure scheme  contains errors -> check definition
    Message no. KH205
    Diagnosis
    Entry   not contained in Table T237A.
    Procedure
    Check key figure scheme  (in particular line 9062) in table T237A.
    I checked in Tcode KER1 but did not find any Key figure scheme.
    Afterwards, I checked table T237A and T237 and found out that number of hits in table 237A is less than in T237A.
    I think this is the reason why system has such reaction.
    Please help me with this issue.
    Best regards,
    Linh.
    Edited by: tvlinh on Mar 7, 2012 11:22 AM
    Edited by: tvlinh on Mar 7, 2012 11:22 AM

    Hi,
    This issue can occur if you have transported the Key Figure Scheme (KFS) from another system and /or deleted value fields. Has this happened ?
    To fix the issue you need to renumber the T237 in the source client executing the function module RKE_FILL_TABLES_T237FF as mentioned in the note 13838.
    After this try to create a new form and check if that works. If there are still problems with the existing form/report then the best
    way might be to delete and create again
    regards
    Waman

  • New column with formula in Report Painter - GRR2

    Hi gurus,
    I want to insert a new element in my new report painter created by GRR2. I took a standard report and I copied the report.  I know how to insert a new element.
    The problem is I want to choose the value of a field in PROJ table for create a formula in my report. The users insert a value in user-define fields of CJ20n, and i would like to choose this value for create a formula in my report.
    Can I create a formula to take this value from the table PROJ? If I need to create a characteristic for choose this field, as I can create?
    Thanks.

    Hi,
    My question is:
    Can i pick a value of a table (proj) for use in formula of report painter??
    Many thanks.
    Regards.

  • Report Painter form issue

    Hi
    I have changed the form layout in KE85 for one of our report painter report. I have transported the changes to quality. The form changes are appearing as per Development but the screenlayout is not changed.
    Is there anything else I should do like import, or generate the report etc. If so kindly let me know the details.
    Thanks
    N Sankar

    Hi Franc
    Thank you very much for your valuable input. But my report does not have report group. It is a report created by using a form in KE84. This form is attached to a t_code and the same transported to quality. In quality the form changes are appearing in the form. Whereas when I execute the form changes are not called.
    This is what confusing me a lot. Can you please guide me on this.
    Thanks
    N Sankar

  • Report Painter - Forms

    Hi Gurus,
    I needed to develop report painter report for WBS element, where I need to compare two plan versions against  the actual. The report out put is done.
    User need to enter two plan version as input in the selection,  for both the plan versions the caption is  “Plan version” – I  need to change  one Plan Version as “Plan A” and other as  “Plan  B”, so that user can select appropriate version plan version for Plan A and Plan B.
    How to change it? Please provide instructions on how to achive this......
    Thanks in Advance.
    Regards
    Periasamy

    Transaction Grr2
    Select report
    Insert Plan as a Column, and select which Plan (you can us the icon before the from column to select this in general data selection), possibly with value types (we use 1 & 10)
    Insert plan as another new column and follow the same above, but use a different Set for Plan version.
    You may need to create a set for each plan version (GS01)

  • Conditional formula in report painter.

    Hello.
    I create new CO-PA report in KE31 transaction which is based on a form.
    In transaction KE35 I define the new form and in this form I want to create formula.
    This formula should be conditional. How to define conditional formula in that kind of form.
    I can also define key figure scheme in transaction KER1 but in this transaction I also don't see possibility to define
    conditional formula.
    Conditional formula means that some value fields should be summ and some value fields should be substract
    depending on the value of characteristics.
    How to solve this problem in R/3 4.6C?
    I am waiting for help.
    Best regards
    Bogdan

    Hi,
    I don't think that we can put the conditional formula. but we can do the calcualtion by row wise or column wise.
    Thanks.

  • CO-PA column formula in report painter

    Hi all,
    Sorry about previously explanation!
    In KE34, when define a form, we need several columns with a formula that is a combination between cells.
    Rows:
    - Row 1: Revenue (Y001)
    - Row 2: Total cost (Y002)
    - Row 3:  Wages cost (Y003)
    - Row 4: Depreciation cost (Y004)
    - Row 5: ...
    Columns:
    - Column 1: Plan - value (X001)
    - column 2: Plan - % (X002)= Cost / revenue * 100
                       for example: Cell Z001 (interaction between row 2 and column 2) = Y002/Y001 * 100%
                                             Cell Z002  (interaction between row 3 and column 2) = Y003/Y001 * 100%
    How I can set formula for column 2?
    I tried to define formula for each cell in column 2. It worked, but it takes too much time cause the report includes 3 column like column 2; and about 20 rows -> 3*20 cells need to define for each report like this???
    Is there any tool or formula variable i should  use instead?
    Thanks for any help
    HuyenTT
    Edited by: huyentt4 on May 17, 2010 11:22 AM

    Hi,
    there is no need to define the formula for each cell.
    Mark cell 1/1 (Plan revenue) Have no other cells marked. --> this is cell Z001
    Define column 2 formula as: Column 1 / cell Z001
    The formular will for line X take the plan value from line X and divide it by the plan value from line 1.
    I have lots of reports where I use this
    Regards
    Nikolas

  • Problem is report painter form defination

    Hi Mentors,
    i wish to alter the length of the lead column and have to show a lot of columns in my layout form page (But system is giving error that length exceed.)
    How to cater this?
    Regds,
    Sharmi

    Hi Sharmi,
    For changing the length of the lead column, please go to Menu > Formatting > Report layout > lead column > Length.
    For various columns, the standard SAP limitation is that a page can contain only maximum 255 characters, if your columns are exceeding that then you have two options:-
    (1)     Reduce the length of the various individual columns so that they gets fitted in the same page of 255 characters
    (2)     Create a new page
    Regards,
    Gaurav

  • Default formula in report painter

    Hi,
    We have added one total 'column formula' and one percentage 'line formula'
    The problem is in the cell met by these two formulas. The system takes the column formula by default.
    How can we modify this so that the system takes the line formula by default?
    The total percentage is always the sum of all the percentages but not the percentage of the 'total column'
    Thanks for your answers,
    Best regards,
    Laurent

    Laurent,
    I am struggling with the exactly the same issue. Did you manage to figure out a solution ?
    Regards,
    Peter

  • Difficult report formula in report painter

    Hi Gurus,
    I would like to do the following:
    I have 5 columns(X1-X5) and 5(Y1-Y5) rows. If I wanted column X2 in row Y2 to be the sum of X2 in row y3, how would I go about this.?. The issue is really about putting in a formula in different cells.
    Any help would be appreciated
    Regards

    You need to use special cell processing. First select the cells. Then the selected cells will have a new variable starting with "Z".
    Now use these selected cells to make your custom formule.

  • Difference between Form & Report Painter

    Hi Experts,
    What is the difference between  Forms and Report painter reports? (My understanding is that Forms for PCA and Report painter for Cost Center).
    Could also any one provide me the like related to SAP Documents to create Report Painter & Forms reports
    Thanks in Advance
    Gowsi

    <b>Form painter</b> is a term used in SAP Smart form context
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb48df8f11d3969700a0c930660b/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb42df8f11d3969700a0c930660b/content.htm
    http://www.thespot4sap.com/articles/Code_CostCentreReport.asp
    <b>Report painter</b>
    A tool for creating reports that meet specific business and reporting requirements.
    The Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
    The SAP System is delivered with several row and column models that can be used as building blocks to help you create reports quickly and simply.
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    Regards
    Vivek
    *Assign points for all the useful answers

  • Report Painter - variables in formulas

    Dear all,
    we try to use value variables in formulas within Report Painter reports which should not influence the selection. Example: the benchmark of a daily rate is 975 € - and the report should calculate the variance between the effective daily rate (total of service-provider costs divided by number of rendered hours divided by 8). The 975 € should not be stored as a fixed value within the formula but should be defined as a value variable.
    Ideally the value should be editable at the selection screen.
    Has anybody an idea?
    Thanks for your response.

    Hi
    I suspect you are not able to use the '& symbol in the formula in your system because the note 593897 was not present in old release.   
    Due to this note there is no need to enter '&' symbol for variables in the formula but in order for the variables to be used please make sure  that the variable is contained in the general data selection of the  report.                                                                
    Kidn Regards
    davide

  • Report painter-syntax error form 'SEL-L023' already exists

    Hi,
    When i copy a report painter form and generate it to the same report group (same as source report) i get an error 'syntax error form 'SEL-L023' already exists. I saw the ABAP code the source and target have same form name.
    Where can i change the form name?
    Thanks

    I will closed this thread as I hv solved my problem already.thks

  • How to apply condtion formula inside Report Writer and Report Painter

    Hi anybody,
    I am doing report painter. but i don't know how to include condition formula inside report painter or report writer. ex if condition ..
    Anybody please explain to me the steps of report writer how do this.
    I will appreciate goods answers to me.
    thanks
    Regards,
    S.Muthu
    Edited by: Subramaniyan Marimuthu on Jun 3, 2009 7:50 AM

    www.virtuosollc.com/PDF/Get_Reporter.pdf
    This is most useful PDF written by industry expert. This is more informative.
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    Regards,
    Ravi

  • Cash flow direct method report is generating by using report painter

    Dear all
    i am preparing cash flow statement direct method report by using  standard t.code s_alr_87012271
    in this report i am maintain values by using T.code FSI5 in report painter form name 0SAPRATIO-04
    there i am maintain GL accounts codes which cells are not having formula
    for example second  row item Increase in down payments received it contain the formula Z004-z003
    and third row character Increase in receivbls frm gds & services it contain the formula z007-z006
    where can i maintain formula components and how to create and  link the GL Accounts.
    please guide me.
    Thanking you
    Kranthi

    Hi Victor,
            Cash Flow S_ALR_87012271 is the std cash flow where you have to assign gl. After excuting report. Click on form and assign gl to FORM :-  0SAPRATIO-04 Cash flow (direct).
       But it's std format so you will not get the report of cash flow which will show the total inflows and outflows in the bank account as per comapny scenario. For this   u have to take ABAP person help to create cash as per comapny requirement.
    Nikhil

Maybe you are looking for