Forte Australasian User Group

Dear Forte Customer/Partner:
The Hydro-Electric Commission of Tasmania and Forte Software Pty Ltd invite
you to the first Forte Australasia User Group Meeting.
Spend an evening and a day with fellow Forte users in Hobart, Tasmania. The
registration fee for this meeting is $100 per person which includes all
meals. Attendees will also receive a Forte Australasia T-shirt!
CALL FOR PAPERS: We invite any member of the Forte community to present a
paper at this user meeting. Several papers will be presented by Forte
employees, but we need the participation of Forte users to turn this into a
real USER GROUP!!!!
Schedule:
Wednesday, November 27th.
6:00 pm Registration
7:00 pm Dinner
Thursday, November 28th
8:00 am Breakfast
8:30 am Keynote Address
9:00 am Morning Session: Presentation of papers
12:00 pm Lunch
1:00 pm Afternoon Session: Presentation of papers
4:00 pm Closing Address
4:30 pm The End
DEADLINES:
Please register with me ([email protected]) by November 8, 1996 if you are
interested in attending the User Meeting.
Please send your paper abstracts to me ([email protected]) by October 31, 1996.
I can also be reached at the phone/fax numbers listed below.
Regards,
Eric
--_|\ Eric Gold
/ \ Technical Director
\_.--._* Forte Australia
v Voice: 61-2-9926-1403
Fax: 61-2-9926-1401

On Wed, 6 Nov 1996, Dave Stanton wrote:
The next meeting of the Forte Western Region User Group will be held
on Nov 15th, from 9 a.m. to 4 p.m. at Forte Software, Inc. on the 22nd
floor.Hello.. I'm sort of new to Forte and to this list..
Are the User Group meetings always in Oakland?
Because, frankly, if they never slide down the peninsula, we'll never be
able to attend..
Cheers.

Similar Messages

Interest in a Studio/Forte Developer User Group?

Using Sun Solaris Tools? We would like to guage interest in attending or presenting at an upcoming Sun Solaris Tools User Group meeting. This meeting would most likely be held in early spring.
If you are interested, please send your Name, Company contact information, and a brief description on how you use Solaris Tools to [email protected] by December 10, 2004.

This looks like something that I am interested in - I have several applications with pre-existing authentication/authorization structures built in (Services, projects, etc) - and I want a very lightweight way for users to be able to view/edit (where appropriate) documents (Backup/Restore documents, basic usage, system design, etc).
But I want to be able to embed the documents/editor in existing applications (APEX based).
I have already tied the forum application into an application menu system, so each APEX based application has a nav bar entry "Forum", that jumps to the discussion category for that particular application (and the modified forum application uses the authorization from the menu system to decide what topics a person can see/post.)

FORTE AUSTRALIA USER MEETINGS IN HOBART NEXT WEEK

Dear Forté User:
The Inaugural Forté Australia User Meetings are next week and those of who
are registered are in for an extremely valuable experience. EVERY SINGLE
CUSTOMER and PARTNER from Australia will be sending representatives to
these meetings.
We here at Forté Australia have been working hard over the past 9 months to
ensure the success of Forté in Australia and New Zealand. This
unprecedented 100% ATTENDANCE at the Inaugural Forté Australia User Meetings
sends us a clear message of strong commitment and enthusiasm within the user
community. Needless to say, if we can keep up this level of excitement from
you (and from us) we will all be assured of success with Forté.
We expect these sorts of meetings to occur on a regular basis. However, a
strong User Group requires commitment from you the FORTÉ USERS! One of the
most important items on the Agenda for Thursday will be for you, the Forté
Users, to organise yourselves and take control of YOUR User Group. Greg
Barber of Price Waterhouse has done some research into the structure of
Forté User Groups in the USA. He will be presenting his findings on
Thursday as well as facilitating the creation of the Forté Australian User
Group.
Important points to remember:
- Dress at events will be CASUAL
- Rooms are available at the Grand Chancellor Hotel in Hobart, Tasmania at
$145/night
Call the hotel directly at 03-62354535
- Cost is $100 per person which includes all meals
- Forté Australia User Group T-shirts will be provided to
all attendees
Here is the Agenda:
Wednesday, November 27
(Richmond Room - Hotel Grand Chancellor)
6:00pm - 7:00pm Registration - Hotel Grand Chancellor
7:00pm - 10:00pm Dinner (Richmond Room)
Thursday, November 28
(Macquarie Room - Hotel Grand Chancellor)
8:00am - 8:30am Breakfast
8:30 - 9:00 Welcome and Company Update
Duncan Bennet, Forté Software
9:00 - 9:45 R3 Features and Internet Strategy
Eric Gold, Forté Software
9:45 - 10:15 Query Result Set Buffering Techniques
Noel Hébert, Forté Software
10:15 - 10:30 Morning Tea
10:30 - 12:30pm An Overview of "Frontline":
The Hydro-Electric Commission's Customer
Accounting Solution
Presented by members of the HEC project team
- Frontline Demonstration
- Business and Methodology approach
- IT infrastructure: partitioning, DB Access,
caching, references
- approach to offline processing
- window navigation
- Hydro's Forté infrastructure: environments,
workspaces, backup procedures
12:30 - 1:30 Lunch
1:30 - 2:00 Forté Australia User Group Planning
facilitated by Greg Barber, Price Waterhouse
2:00 - 2:45 Forté and the World Wide Web
Peter Milne, Forté Software
2:45 - 3:00 Afternoon Tea
3:00 - 4:00 Analysis & Design for Forté using
SELECT Enterprise
David Coldrick, FrontRunner Systems
4:00 - 4:30 Close
Duncan Bennet, Forté Software
--_|\ Eric Gold
/ \ Technical Director
\_.--._* Forte Australia
v Voice: 61-2-9926-1403
Fax: 61-2-9926-1401
"Even if you're on the right track, you'll
get run over if you just sit there."
--Will Rogers

hi adam.... wru from in India?
i got new repalcement handset after 20+ days of daily chasing... i was given fresh piece but just the hnandset as other all accessories i had and they want replace... i got new 2. shareware also loaded but the Problem SAME still persist... nothing has changed and nothing will change in N91. its been declared biggest failure of Nokia by company. i hv heard that they going to pull out this from market. so prices have also crashed. out of every 10 pc min 6 are faulty with hanghing problems. other 4 are either lucky or not using instrument fully.
my advise will be chase nokia in both place. 1st the service centre and 2nd the helpcare./ keep records of names u talk with. it wl be handy. once u get replacement SALE N91 at best possible price... i wish i had done same but got fooled by promise fr nokia that now the N91 is without any problems... all the best.

Re: European Forté User Group

Manfred Schwegler wrote:
>
Hi,
anybody here in Europe who is interested in building an European User Group
for Forté-Users ?
If so, contact:
Manfred Schwegler TechnoData Informationstechnik
GmbH
Leiter Entwicklung 25. Jahre
Software für das Bauwesen
[email protected]
http://www.technodata.de
Yes, we would be interested.
Our department at the university has the state of
a Forte Competence Center, and we would like to share
our experiences with others users. We are using Forte
since October last year, thus having - at least in Germany -
comparatively much experience.
As an important issue for a user group, there could be
the construction and maintainance of a list of user
requirements and enhancement requests which should
regularly be presented to Forte. An excellent example
of such a list is managed by the Sybase user's group.
Johannes Schmitz-Lenders
Johannes Schmitz-Lenders : ... : email [email protected]
Uni GH Siegen : :.. : voice/fax +49(271)740-2301/-2372
Wirtschaftsinformatik :.: ..: :.:
http://www-winfo.uni-siegen.de/docs/staff.htm
----------------------------------------------------------------------

Hi,
Check the tables starting with AQG*.
Reward points if useful.
Regards,
Atish

Philadelphia VFP User Group--Tuesday, April 14--"Document Management within Visual FoxPro"

The Philadelphia VFP User Group meets Tuesday, April 14 at 7:00 PM in room 104, DeVry University, 1140 Virginia Drive, Fort Washington, PA. As usual, feel free to bring some dinner and come as early as 6:30 PM.
This month, member Jim Connolly will speak on “Document Management within Visual FoxPro.”
Abstract: I created programs that will create an electronic filing system. The programs read the bar codes from the invoices and files them in electronic storage. This allows the end user to view the documents with a single click in the app. I will show the
class how to setup the bar code reader and to accept individual scans for easy access. There are some recommended programs that will assist in the process. I will present them along with the Fox Pro program.
We need speakers for upcoming meetings. Please let Jim ([email protected]) know if you have something to share with the group.
http://vfpphilly.blogspot.com/

The Philadelphia VFP User Group meets Tuesday, April 14 at 7:00 PM in room 104, DeVry University, 1140 Virginia Drive, Fort Washington, PA. As usual, feel free to bring some dinner and come as early as 6:30 PM.
This month, member Jim Connolly will speak on “Document Management within Visual FoxPro.”
Abstract: I created programs that will create an electronic filing system. The programs read the bar codes from the invoices and files them in electronic storage. This allows the end user to view the documents with a single click in the app. I will show the
class how to setup the bar code reader and to accept individual scans for easy access. There are some recommended programs that will assist in the process. I will present them along with the Fox Pro program.
We need speakers for upcoming meetings. Please let Jim ([email protected]) know if you have something to share with the group.
http://vfpphilly.blogspot.com/

Re: Western User Group Meeting 3/8/96

On Fri, 23 Feb 1996 23:17:00 -0800 (PST), [email protected] (Lee Wei) wrote:
Anyway, I heard there was an Eastern Forte User Meeting held
in the past few weeks. Can you folks on the east coast fill
us in on the details? How many people attended, what was the
format, how was it organized, the dos and don'ts..Lee,
The East Coast Forte Users Group was held in Tampa, Florida last Monday and
Tuesday. About 50 people showed up from the region and it was hosted by
Technical Recource Connection of Tampa. Excellent event.
For more information you should call the guy who was responsible for the whole
thing, Bill Gonch at [email protected] I'm sure he'd be happy to help you get
going.
Jeff
The Mianus Coalition
116 Dean Street
Stamford, CT 06902-6251
http://www.mianus.org/~modemnews/mianus.htm
---------------------------------------------------

Hi Mike,
Re: the Adobe Developer Days - your message indicates this is about the "LiveCycle set of capabilities", yet I'm confused by the description on http://partners.adobe.com/public/developer/events/index.html which states:
"This all day developer event will feature tips on developing with PDF as well as advanced JavaScripting techniques for Acrobat developers."
In my mind there is a big difference between an Acrobat developer vs. a LiveCycle (Desiger, Forms, Reader Extensions, etc.) developer. I wouldn't wnat to attend an Adobe Developer Day, expect to learn how to develop LiveCycle Designer forms and discover that the day focusses on Acrobat forms. Which is it?
Sometimes I find the flipping between "Acrobat" developers and "LiveCycle" developers on Adobe.com to be confusing; as I said in my mind, these are two different beasts (as has been stated several times in this forum, and has been the source for much confusion between "veteran" users of Acrobat Professional forms who are using LiveCycle Designer for the first time).
Perhaps you shed some light on this for me.

Western User Group Meeting 3/8/96

In case you have not heard, we are organizing the first
Western User Group meeting on Mar 8th (Friday) in Palo Alto, CA.
I just talked to a customer who is not aware of this,
hence I am sending this over the net..
The best person to call is Lorinda Swick at 510 869-2135.
On a similar topic, this year's Forte User Meeting (FORUM)
will be held on March 5-8 in San Francisco. It would be
nice to see you folks there.
Anyway, I heard there was an Eastern Forte User Meeting held
in the past few weeks. Can you folks on the east coast fill
us in on the details? How many people attended, what was the
format, how was it organized, the dos and don'ts..
Lee Wei
[email protected]

On Wed, 6 Nov 1996, Dave Stanton wrote:
The next meeting of the Forte Western Region User Group will be held
on Nov 15th, from 9 a.m. to 4 p.m. at Forte Software, Inc. on the 22nd
floor.Hello.. I'm sort of new to Forte and to this list..
Are the User Group meetings always in Oakland?
Because, frankly, if they never slide down the peninsula, we'll never be
able to attend..
Cheers.

Re: I would like to join the users group

Michael,
Welcome to the Forte community!
Please refer to the web page http://www.sagesoln.com/forteusr.htm
on information about the mail list. Including how to subscribe and
etiquette.
The mail list is maintained by Sage Solutions, which is not
affiliated with Forte.
The list now contains about 930 email destinations, of which approx.
130 are Forte employees. So it is very likely that any questions you
have can be answered by someone on the list.
Sorry to cc everyone,
Lee Wei
At 12:19 PM 11/11/97 -0700, [email protected] wrote:
>
Hello! My name is Michael and I am a consultant with Per-Se Technologies
(formally BSG). I am currently using Forte for development at our US West
project. I am doing some research on Forte applets and I have some
questions that our staff is not able to help me with.
Would it be possible to be added to the users group and post some
questions? I would greatly appreciate it.
Thank you
Michael Komar

I would like to design android ui's and applications under Firefox, not for the web browser itself. i was hoping to call it Firefox-GT. with the help of the Firefox developers i would like to create a user immersive launcher. i was hoping that this would be another derision of Firefox.
Kind regards
Krishnesh.G

OIM 9.1.0.2 - User group permission conflict issue

Hi Gurus,
IHAC who have faced a strange behavior about permission conflict.
User has been assigned to a user group (ANALISTA DRSI) who have permission to disable resource of the users he administrates. The user group has been assigned to resource's administrator.
The same use has been assigned to other user group (ANALISTA ADM DRSI) who have other permission. The user group has been not assigned to resource's administrator.
If the user has been only assigned to ANALISTA DRSI user group the user is able to see records on Rogue Account report. If the customer has been assigned to both ANALISTA DRSI and ANALISTA ADM the user is not able to see the record on Rogue Account report. He got a display error message (You do not have permission). Both user groups have the Report menu item assigned.
My question: if the customer is assigned to a user group who have permission to see the reports, should not the user is able to see the report even though he is also into the other group who do not have permission?
Is there conflit in the OIM???
Any tip will be very appreciated.

Orgnaization > Manage > Select Org in which users are getting created > Administrative Group (Drop Down) > Select Group for which users are not coming.

What is difference between user group and reference user group?

hi
guys,
what is difference between user group and reference user group?
your regards
p.suresh

Hi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

Trash and user group help!

why do i need to type in password when i delete things? how do i remove it?
and i can't delete items directly from the dock as well. like opening from the downloads folder and dragging the file to trash. i have to bring open up Finder and delete from the folder directly.
another issue is that am i able to remove the gues user from my start up screen? i've already disabled it from the user groups but i still see it in my login screen.
one last problem, is it a norm to have current leakage for the MBP? i've been having frequent shocks from the 2 bottom corners of it when i plug it in to a power source. i bought it from an authorized retailer and using it in the country where i've gotten it from. i've just gotten my mbp about 3 weeks back.
thanks for replying my queries!

Hi,
Yeah in ACS 3.1 its under the Shared Profile Components page. In ACS 4.1 its directly under the user groups or under SPC page.
You need to check the box for "define ip based access restriction" and deny access for all other groups to the wireless access points network device group.
ACS 3.X)
1. Denied Calling/Point of access restrictions
2. AAA Clients =UPS_PDU (Power Supplies)
3. Port = just put a * for all
4. Src IP address = just put a * as well
SUBMIT to SAVE
Create a second one for the other group like so:
1. Denied Calling/Point of access restrictions
2. AAA Clients =Routers_Switches
3. Port = just put a * for all
4. Src IP address = just put a * as well
Click submit to save it.
Go to the ACS User groups section and select the Network Administrators Group " that don't need access to the UPS's" and apply the NAR you created to that group. Do the same for the other grouping.
(ACS 4.X)
Go directly under the "user groups" and create the NAR under there. No need to go under the Shared Profile Components section
Hope this helps and let me know if you need further assistance or explanation.
Craig

Pulling user/group field data from SharePoint list using REST, jQuery, Knockout.js Sharepoint 2013

I'm trying to make an interactive task board based on the task list app in SharePoint 2013. The task lisk includes fields like "Title","Description","Status","% Complete","Due Date","Assigned To",
etc. I used knockout.js to bind "Title","Description", and "Status" to my HTML controls. Here is some of the code:
var ViewModal = function(items, listname){
var self = this;
self.sortBy = ko.observableArray(sortBy);
self.tasks = ko.observableArray(items);
self.listname = ko.observable(listname);
self.auto = ko.observable(false);
self.getTasks = function() {
clearTimeout(self.getTasks);
// server relative url to REST service endpoint
var ajaxurl = _spPageContextInfo.webServerRelativeUrl + "/_vti_bin/listdata.svc/" + self.listname() + "?$orderby=PriorityValue";
$.ajax({
type: "GET",
url: ajaxurl,
contentType: "application/json; charset=utf-8",
dataType: "json",
cache: false,
processData: true,
success: function (data, status, xhr) {
if (status == "success" && data) {
ko.mapping.fromJS(data.d.results, mapping, self.tasks)
$(".task-item").draggable();
error: alert
if (self.auto()) {
setTimeout(self.getTasks, 10000);
<div class="tasks-column">
<div class="column-header">Not Started</div>

<div class="task-item">
<div class="view" data-bind="visible: !IsEditing()">
<button class="edit" data-bind="click: $root.editTask">edit</button>
<h2><span data-bind="text: Title"></span></h2>
<div data-bind="html: Description"></div>
<span data-bind="text: PriorityValue"></span>
</div>
<div class="edit" data-bind="visible: IsEditing">
<button class="save" data-bind="click: $root.saveTask">save</button>
<input type="text" data-bind="value: Title"></input>
</div>
</div>
I'm having trouble displaying the data from the "Assigned To" user/group field. I tried:
<span data-bind="text: AssignedTo"></span>
But it displays the field as [object Object]
I tried using $select/$expand
?$select=Title,AssignedTo/Id,Assignedto/Title&$expand=AssignedTo/Id,AssignedTo/T‌itle";
But it still returns the [object Object]

Hi,
Please use the REST URI below:
/_api/lists/getbytitle('ListName')/items?$select=Title,AssignedTo/ID,AssignedTo/Title&$expand=AssignedTo/ID,AssignedTo/Title
More information for your reference:
How to get User Details and User Group Details in SharePoint 2013 REST API with Knockout for SharePoint Js (KoSpJs)
http://www.ashokraja.me/post/How-to-get-User-Details-and-User-Group-Details-in-SharePoint-2013-REST-API-with-Knockout-for-SharePoint-Js-(KoSpJs).aspx
How to Get Login Name and Display Name using SharePoint 2013 REST API
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/how-to-get-login-name-and-display-name-using-sharepoint-2013-rest-api.aspx
Best Regards
Dennis Guo
TechNet Community Support

Welcome to the new Oracle User Group Community

Welcome to the new Oracle User Group Community. Whether you landed here via the redirect from the previous community site - IOUC.org - or navigated here directly, welcome. This new platform brings new community features to enhance the way you connect with user group peers and with Oracle, as well as make it easier for you to find information through a more intuitive interface. We invite you to provide your feedback on the new site. Log in using your OTN Forum credentials and join the discussion here. If you do not yet have OTN Forum log in credentials, navigate to http://community.oracle.com/community, click on the "Register" link in the upper right corner of the page and create your account.
We look forward to hearing from you.

Hi Kashif,
Glad you like the new Community. Communication among user group leaders works a little differently on this site than on the previous site. Rather than having communication focus around e-mail distribution lists, communication now is focused within the site itself. The intent is that this will provide users the one place to come for information, rather than having to sort through lots of e-mail threads. That doesn't mean that e-mail is completely out of the picture though. Users can opt-in to receive e-mail notifications when an individual piece of content is changed, or when content is posted to a space. Look for the "Receive email notifications" link under "Actions" to start receiving notices. To stop receiving notices, go back to the same content/space and click "Stop email notifications".
Your Relationship Manager will be talking with you and the other leaders in your region over the next few days and weeks regarding how you and your group of leaders want to communicate.
Best regards,
Oracle User Group Team

How to find user group from tcode

Hi Experts,
I have custom tcode from this i found report name as AQIDSYSTQV000001SD_RR_03======
I am unable to find Queryname in SQ01 from this.
When i saw some of the forums i understood that IDSYST is the user group for my query but i am unable to trace such user group in SQ01.
Please guide me how to find user group for my report
Thanks&Regards,
narasimha.

Hi ,
I found in table AQGQSTRUC but i didnt find the specified query
Previously 401 client is there but at present it is not there .How can you justify it that it is 401 client.
As 401 client data is moved to someother client is it the problem why i am not able to find query??
Thanks&Regards,
narasimha.
Edited by: narasimha02 on Dec 7, 2010 9:54 AM

Populating the user group instead of the group ID in MFA

Hello all,
I am trying to Populate the user group instead of the group ID in MFA. I want to use this to create authorization permissions, after authentication. I am running into the problem of not getting any info after authentication in the attribute dump. Are
there settings that I can change in order to Populate the attribute dump? are there settings that I can change to get all of the groups that each user is in?
Thanks,
Levi Williams
IT professonial
Intern

Hi Levi Williams,
Thanks for posting here!
Refer to the solution in this thread link:
https://social.msdn.microsoft.com/Forums/en-US/df060757-8190-4083-a162-0876cd4b8d15/group-based-radius-return-attributes?forum=windowsazureactiveauthentication
Additional reference:
http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
Hope this helps!
Regards,
Sadiqh

Forte Australasian User Group

Similar Messages

Maybe you are looking for