Forte Install: Error in instructions. Invalid jvm file...

When I try to install Forte (Sun ONE Studio 4)(I tries CE, CE bundled with J2SE1.4 and EE) on a WIndows XP system I get the following message:
"Error in instructions. Invalid jvm file name specified in LAUNCH. Invalid variable specification. Line number (4)" (That is line number (5) for installation of the bundle).
This happens while InstallShield states:
"Searching for Java(tm) Virtual Machine... Verifying Java 1.3.X by Sun Microsystems"
I tried probably every combination of the 3 Forte above with J2re1.4.1, j2sdk1.3.1_05,j2sdk1.4.0_02,j2sdk1.4.1 and no SDK/JRE installed. I tried the .sp file in the download directory this the problem seemed related, I gave him pathes, I installed from the cmd with -is:javahome C:\jdk1.3.1_05 (and all the other locations it was installed to)...
Anybody has any clue? If you have any question about my system, just ask

I have a same problem. I fail to install "Sun One Studio 4 (Forte, Community Edition)".
My environment is "j2sdk1.4.1 on windowse2000".
I can install same package in same environment (as far as I believe) on another machine...
Thanks and best regards.

Similar Messages

Invalid jvm file

Hi, I need some help!
I downloaded and installed Java runtime 1.5.0_06 from official Sun web
site.
I downloaded Football manager 2007 but, when i tried to install it, I get this message:
Error in instructions. Invalid jvm file name specified in LAUNCH.
Invalid variable specification. Line number (9)
What should I do to resolve the problem?

well,
when i had the trouble with the LAUNCH issue y formatted th pc and reinstall windows, it worked. But this is not the solution.
the trouble is that you don�t have the global path of jvm so watch it with CMD and then do SET command, exported.... or do this to especify were to work trought the installation:
in cmd do:
'your_bundle_application' -is:tempdir 'path_where_to_work'
e.g.
jdk-6u2-nb-5_5_1-win-ml.exe -is:tempdir c:\
and voila....
works for me hope it works for ya
thanks to a french buddy...
go the original post:
http://www.commentcamarche.net/forum/affich-1383938-java-virtual-machine
broadcast this .........

My Numark virtual DJ will not install, it keep saying invalid skin file. g g invalid

My Numark virtual DJ will not install, it keep saying invalid skin file.

Try the > VIRTUAL DJ SOFTWARE - Help Center
or something at > OS X support for Numark virtual DJ - Google Search

For Thos get error message like "Error in instruction. Invalid jvm file ...

try run the installer from command dos like
C:\Source>studio5me-win-en.exe -is:javahome c:\javaSDK -is:tempdir c:\temp -is:log log.txt
where c:\javaSDK is ur Java SDK folder
and c:\temp is temporary installation folder (can be anywhere)

try run the installer from command dos like
C:\Source>studio5me-win-en.exe -is:javahome c:\javaSDK -is:tempdir c:\temp -is:log log.txt
where c:\javaSDK is ur Java SDK folder
and c:\temp is temporary installation folder (can be anywhere)

Cannot install Photoshop Touch, get invalid package file

I have purchased the Photoshop Touch for phone on my Galaxy Note2 and haven't been able to install it since. It goes thru the install process, but at the end I get: ERROR PACKAGE FILE INVALID. I've gone thru this several times and it's very frustrating. Additionally, I have tried to search the forums and Google solutions, nothing is working. I've even chatted with and spoken with a couple of Adobe representatives...no success. I just keep getting referred bk to this site. Can anyone help me either get it downloaded or tell me how I can get a refund. #paidforanappIhaveyettobeabletouse

Please try the steps explained here:
http://www.android-advice.com/2012/fix-android-market-package-file-is-invalid/?utm_source= feedburner&utm_medium=feed&utm_campaign=Feed%3AAndroidAdviceTutorials%28AndroidAdvice%26+Tutorials%29
HTH

Oracle 9i install error in writing to temp file

Could someone please help?
I'm trying to install the Oracle 9i client (v.9.2) on windows xp, but getting this error:
"Error in writing to directory C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2005-09-15-xxxxxxx". Please ensure that this directory is writable and has atleast 32 MB of disk space. Installation cannot continue.
I deleted the install on the temp folder, there is more than enough space to write (over 20gb free hd space). I'm lost on how to fix it, and have wasted far too much time trying to get it to work. Please help!!!

You could set TEMP and TMP temporarily in a DOS box :
set TEMP=<temp_directory>
sert TMP=<temp_directory>
Then start setup.exe out of this DOS box.
Unfortunately there are reported many possible reasons for this error, including bugs.
Maybe this metalink note could help:
Note:71919.1
Subject: Debugging the Oracle Universal Installer(OUI) on Windows

BO Edge Trial Install Error: product key invalid STW00140

Hi,
I am trying to install BO Edge trial version 3.1. But it gives me error:
The product keycode you entered is not valid. STW00140
after i enter the product key and hit next.
Product key is the one I obtained from SAP after registering for the trial version. I am pretty sure that it is correct.
I had Xcelsius trial and BO Client installed on this computer earlier. I did uninstall both of them and also deleted all registry entries.
I also tried following this thread but that too didnt help me:
http://www.forumtopics.com/busobj/viewtopic.php?p=594198
OS is Windows XP.
Please help me friends,
Thanks in advance,
CD

Please explain how to get the Product Key to complete an installation if one downloads the Evaluation Copy of Crystal Reports.
Thank you,
Edited by: Douglas V. Wright on Sep 3, 2008 6:32 PM
Edited by: Douglas V. Wright on Sep 3, 2008 6:33 PM

Vision Builder AI import inspection error "Invalid Inspection file selected."

I am attempting to import an inspection into another and get an error
Open Inspection:
-Invalid inspection file selected
I have been able to successfully import other inspections in the past but for some unknown reason these two inspections that I am trying to merge are having trouble..
Thank you
Pete

Hi Pete,
-Is it possible to upload the inspection file for which you are getting this error?
-Can you explain more on this inspection file? What it does?
-From where did you get this or you created this file? If so, from what version of VBAI it is created and what version you are using?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Java 2 SDK SE 1.4.2 - INSTALL ERROR ...... 1335 ....

Hello,
I have tried to install Java 2 SDK SE 1.4.2 but get the following error during install:
Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. The file is 42.7MB and is not something I want to re-download in a hurry.
Is there a work-around for this error. Have had a look but have found no other occurances of this problem.
Thanks in advance for your help.
Jon

Well, I'm not sure what to say. I've had problems much like that, except for Java 2 SDK 1.2.*. I got rid of my problems (which sometimes included "clean" installation but then broken parts, such as javac.exe) by updating and trying again. It wasn't very much fun, especially back in my dialup days.
- CD

First Aid Services reports Errow "Invalid Volume File Count"

In attempt to deleate a small Windows psrtition and creating a larger new Windows partition, Boot Camp directed to First Aid where the resulting error messages are "Invalid Volume File Count" and Invalid File Count", Directions to reboot with program disks failed to work. What next??

What failed to work? Booting to your OS installer disk or running Repair Disk from Disk Utility when you were booted to the installer disk?

Install iTunes 10.4.1 install error - The Folder Path "File Name" contains an invalid character

Upgraded computer from XP Prof 32-Bit to Windows 7 Ultimate 64-Bit (Upgrade package, performed Custom Install).
Attempt to install iTunes 10.4.1 for 64-Bit. Receiving the following error/problem:
The Folder Path "File Name on my external drive" contains an invalid character
I click ok and then get this:
The Installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system could not be modified, Please run the installer again, or click Finish to exit.
Any fixes for this?

Sorry, one of us is not managing to be clear enough.
Does the message read The Folder Path "File Name on my external drive" contains an invalid character or perhaps The Folder Path "<some path name here>" contains an invalid character?
If so, then the problem might be just what it says it is with the path name in question... Either way if you list the path given in the error message in a reply to this thread it might provide a clue for anyone tying to help with the problem.
You could try downloading the installer to C:\iTunesSetup.exe in case that helps.
tt2

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Apex 3.1.2.00.02 creates invalid export file (that gives ORA-20001 error)

Hi
I want to let you know, that sometimes APEX 3.1.2.00.0 creates invalid export file.
Older apex 3.0 created correct file.
For example: our application has page button, where "Optional URL Redirect" is:
Page: &APP_PAGE_ID.
Request: FLOW_XMLP_OUTPUT_R11531800061044170_et
If we export application into file f110.sql and try to import it to the same workspace on the same server, we get error:
{color:#0000ff}ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 28, column 111: PLS-00103: Encountered the symbol "_" when expecting one of the following: ) , * & | = - + < / > at in is mod remainder not rem => .. <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ as between from using || multiset member SUBMULTISET_ The symbol &a
{color}In exported f110.sql file the invalid section is:
{color:#0000ff}wwv_flow_api.create_page_branch(
p_id=>11762805016890347 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 4,
p_branch_action=> 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R'||to_char({color}{color:#0000ff}{color:#ff0000}*10255206661122183_et*{color}+wwv_flow_api.g_id_offset)||':&DEBUG.:::',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'REDIRECT_URL',
p_branch_when_button_id=>11761415275883875+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created 20-JUUNI-2008 12:05 by XXXX');{color}
If we exported the same application in apex 3.0, this section was correct:
{color:#0000ff}wwv_flow_api.create_page_branch(
p_id=>11762805016890347 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 4,
p_branch_action=> 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R*10255206661122183_et*:&DEBUG.:::',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'REDIRECT_URL',
p_branch_when_button_id=>11761415275883875+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created 20-JUUNI-2008 12:05 by XXXX');{color}
Best Regards,
Tõnu

Thanks for pointing that out. We'll fix it. It does appear though, that in 3.0, the offset would not be added to the number part of the request value, so if you installed the application as a different application ID or into a different workspace, the request would have failed.
Scott

Invalid jar file error

invalid jar file error on mobile while installing my application..i have also checked cldc version and midp version of mobile and made my jar file according tom that..still that error is coming..

{color:red}CROSS POSTED{color} Including this --
{color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5240695
http://forum.java.sun.com/thread.jspa?threadID=5240696
http://forum.java.sun.com/thread.jspa?threadID=5240699
{color}
Cross posting is rude.
db

ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file

Hi,
I'm having a serious issue with your brend new Cisco Prime Network Control System (NCS) and i would appreciate if someone could give me good answers.
After a background backup task failure, the database was entirelly corrupted and the oracle server no longuer wanted to start. And because of that the NCS web server is unusable, since no one can log in.
We tryed to restore to last known backup obtained after a former suucessful backup. But we get this error:
"ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file"
All the lost data was previously migrated from the former WCS 7.x server. Before this issue everything was working fine.
So we think that the appliance is seeing the backup file from NCS as a WCS backup.
We need to find rapidly a solution. Here is our configuration:
We formerly had WCS 7.0.172.0 hosted on Microsoft Windows Server 2003 SP2 with the above caracteristics:
Intel(R)Xeon(R) CPU 5120 @ 1.86Ghz 1.87Ghz 16GB of RAM.
We now have NCS Version 1.1.1.24 running under Cisco Application Deployment Engine
OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
ADE-OS System Architecture: x86_64

I was getting this error too. TL;DR: When you transfer the wcs.zip file to your FTP server, make sure you are using BINARY mode... which is often NOT the default FTP mode.
Long Version:
TO GET THIS ERROR, what I had done was use the Windows CLI FTP command to transfer my "wcs.zip" to the NCS FTP server.
-----BEGIN WRONG STEPS-----
C:\ftp
ftp> open x.x.x.x
Connected to x.x.x.x.
220 Service ready for new user
User (x.x.x.x:(none)): ftp-user
331 User name okay, need password for ftp-user
Password:
230 User logged in, proceed
ftp> put wcs.zip
200 Command PORT okay
150 File status okay; about to open data connection
226 Closing data connection
ftp: 526768949 bytes sent blah blah etc
-----END WRONG STEPS-----
I would then run "ncs stop" and "ncs migrate" and get the "ERROR: invalid backup file version. Exception: Error while unzipping invalid wcs 7.x export file".
I remembered something from my misspent youth: Windows, for no good reason, likes to transfer files in ASCII mode. UNIX (which LINUX comes from) prefers BINARY, and the two do not like to negotiate.
TO FIX THIS, I had to just FTP in Binary mode.
-----BEGIN RIGHT STEPS-----
C:\ftp
ftp> open x.x.x.x
Connected to x.x.x.x.
220 Service ready for new user
User (x.x.x.x:(none)): ftp-user
331 User name okay, need password for ftp-user
Password:
230 User logged in, proceed
ftp> binary
200 Command TYPE okay
ftp> put wcs.zip
200 Command PORT okay
150 File status okay; about to open data connection
226 Closing data connection
ftp: 526768949 bytes sent blah blah etc
-----END RIGHT STEPS-----
NOW when I enter "ncs stop" (actually... had to restart them... then stop them... x.x) and then the proper "ncs migrate" commands, I get a happy output and don't have to go home late troubleshooting this.
" Stage 1 of 5: Decompressing backup ...
-- complete.
Stage 2 of 5: Restoring Support Files ...
              : Restoring the Domain Maps ...
              : -- complete.
              : Restoring the License files ...
              : -- complete.
-- complete.
Stage 3 of 5: Restoring Data ...
I hope this helps anyone banging their head against the WCS->PI1.3 install wall.
(Note, WCS needs to be migrated to NCS 1.1.1.24 (NOT NCS 1.1.3!!!!!) before you can migrate to Prime Infrastructure 1.2 or 1.3, because for no readily apparent reason the "ncs migrate" command was removed from PI 1.2 and up. Also note, there is no "Prime Infrastructure 1.1;" they just renamed NCS to Prime Infrastructure after NCS 1.1 because. Yes, the sentence ends there. Great products, all 3, just... agonizing to migrate.)

Forte Install: Error in instructions. Invalid jvm file...

Similar Messages

Maybe you are looking for