Forte install hangs when looking for Java2 SDK

When running the "Forte for Java 4, Community Edition Setup" program under Windows ME, the installation gets as far as "Searching for suitable Java 2 SDK. Please wait .." then hangs.
I have the Java 2 SDK version 1.3.1 and Java 2 Runtime Environment Standard Edition 1.4.0 installed.
Any suggestions?
Thanks,
John

Go to the Sun One Studio page here http://forte.sun.com/ffj/index.html and look in the FAQ/Installation for the solution to the hang.

Similar Messages

Finder crashes when "looking for networks" - workaround that helps

I've read through most of the messages about finder crashes, but what's going on in my case I haven't seen. As I have a work around, I thought I should post.
If for whatever reason the wireless connection pauses or gets interrupted (for example, by closing the lid), the finder hangs in the process of "looking for networks." Most of the time I can still pull up the dock -- the spinning beach ball only clicks in if I mouse over the top menu bar. Sometimes (but not always) I can quit open applications through the dock before I have to do a hard reset.
My workaround is this: I turn wi-fi off before I close the lid. When I open the lid, I wait a short time -- 30 seconds, about -- and turn the wireless back on, and this way I can avoid the finder crashing. If the wi-fi pauses for some other external reason, when "looking for networks" starts up, the finder will hang again.
It's way past time that Apple coughs up a permanent fix, but this might help somebody who's having the same problem. And maybe somebody has a better workaround, in which case, I'd love to hear about it.

Fire_Bird wrote:
1. Going into a folder on my external hard drive that contains the installer for divx for mac.
Divx has been a source of problems with both Tiger & Leopard. See for example Mac OS X 10.5: Finder may not fully "load". If you have installed it, it is probably at least part of your problem.
then i erased the whole thing, and used the Mac OS X 10.5 install DVD that came with my mom's iMac (still happens)
This is not recommended. The install disks that come with specific Mac models do not necessarily install the same things or do all the error checks that the retail Leopard installer disk does. (It is also a violation of the software license to install it on another Mac.) If you want a trouble-free, supported installation of Leopard, use only the retail installer or a disk specifically intended for your exact Mac model.

AnyConnect hangs when checking for required updates

Several of our customers require us to use Cisco AnyConnect to connect to their computers. I cannot connect to any of them because AnyConnect hangs when checking for required updates. If I start AnyConnect myself, it will eventually (after five minutes) tell me that it cannot connect to a server. If it is started from a web page, AnyConnect hangs forever.
In the past, this error has been random. If I try later, or the next day, it may work. Or it may not.
No customer has been able to give us any support on this issue.
Could you please give me some ideas on how to overcome this problem?
Thank you very much.

Disable anti virus software if installed
Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

Install gets stuck looking for /global/scripts/ac_media.js

My dad is older and has moved into a retirement home. He gave us his iMac G4. We have all of the original install discs (including the Mac OS X 10.2 operating system). My first problem is that he can't remember his password (even when we share his "hint" with him). Through a general Google search and on the Apple support site, I have read that I can restart the computer with the OS disc in it, holding the C key down and it will reinstall the OS and I can create a new password. My problem is when the install starts running, it seems to open the IE and the status bar indicates that the G4 is accessing the Apple site to search for files. The process gets stuck when looking for /global/scripts/ac_media.js. I downloaded that file from Apple onto a thumb drive, but didn't know where to copy it into my G4. Can anyone help me?
Thanks,
Julie

My dad is older and has moved into a retirement home. He gave us his iMac G4. We have all of the original install discs (including the Mac OS X 10.2 operating system). My first problem is that he can't remember his password (even when we share his "hint" with him). Through a general Google search and on the Apple support site, I have read that I can restart the computer with the OS disc in it, holding the C key down and it will reinstall the OS and I can create a new password. My problem is when the install starts running, it seems to open the IE and the status bar indicates that the G4 is accessing the Apple site to search for files. The process gets stuck when looking for /global/scripts/ac_media.js. I downloaded that file from Apple onto a thumb drive, but didn't know where to copy it into my G4. Can anyone help me?
Thanks,
Julie

IMovie start up stops when looking for i Photo video's

iMovie starts up but when looking for new iPhoto video's it looks like the program is in a loop and nothing happens anymore. I can only stop the loop by forcing the close of the program.

Removed all iMovie preference files from the library folder, still hangs on start up with the same message
"Updating iPhoto videos Event"
"Scanning for new videos in your iPhoto Library"
Gets half way thru scan,hangs. Spinning ball and iMovie "not responding" in Force quit window
Running iMovie is 9.0.1, on a completly standard machine as supplied from the factory
Cheers
Phil
Message was edited by: Philip Smith2

When connecting to my wifi I get ! When looking for networks

When connecting to my wifi I get ! When looking for networks
I

When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

Having trouble seeing all pix, when looking for something on ebay.

When looking for an item on ebay, some of the pictures are blank.
when I open an item with a blank pix, the picture is there.

What model laptop do you have?
Have you tried using a different USB port?
If you have a USB flash drive or external hard drive, does that work when connected to the same port?
- Peter

Installing New Color Looks for Color 1.5 - Invalid Location?

Hi I downloaded the New Looks for Color 1.5 that Apple provided, which are basically new boxes for the Color FX tab in Apple Color 1.5.
In the installation instructions, it says to copy the folders into this location: /Users/username/Library/Application Support/Color/Effects/
The problem is, this location doesn't seem to exist. There isn't a folder called "Library" in the Users/username folder. When apple sent out Lion, did they change the way this path is structured or something?
I do find a "Library" folder in the root level of my boot drive. And it does have a folder in it called "Application Support," but there isn't a "Color" folder in it. Does anyone have any ideas where the real location is to install these files?
Incidentally, I did try looking in the Color FX Bin tab inside the Color FX room in Color for information. I tried searching in finder for any of the pre-existing Looks that are listed there, but they don't come up anywhere on my system...though they are there in the application. Perhaps the real file name is something different than is listed there?
Thanks!

Click on the GO menu when in the FINDER. Between VIEW and WINDOW. Now, while clicking on that, press and hold the OPTION key. You will see LIBRARY APPEAR. Choose it.

Install hanging when registering automation server

I'm tearing my hair out, as well as getting my 4rse kicked by the other half!
We've had iTunes up and running on our Vista Home Premium box for a while, then it just stopped working coming up with an error.
So I've tried re-installing, but 7.3 keeps hanging when trying to register the automation server. Worst still I have to kill it with Task Manager and it leaves a partial install that refuses to uninstall!
Any guidance would be much appreciated.
Thanks,
Stuart

Registering Automation Server hangs are actually a 7.x.x.x thing rather than a 7.3.0.54 thing. I've seen them with 7.2.0.x too.
Perhaps try this strategy.
First download and then install the QuickTime standalone installer:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
If that install goes through properly, then try another iTunes install.
(The theory here is that if your QuickTime is already up to date, the iTunes installer bundle skips the QuickTime part of the install. If the iTunes installer is given less to do, sometimes it gets past the Registering Automation Server hang.)

Photoshop hanging when saving for web

I have a problem with photoshop hanging when I try to save for web. The only way to get photoshop to respond is to end task
I have reinstalled photoshop but this didn't help. I am not sure where to look for log files to try and pinpoint what the problem might be.

Hi,
What version of photoshop and operating system are you using?
What are the pixel dimensions of the images your using in save for web?
Prior to photoshop cs6, photoshop save for web would sometimes be quite slow if your image was very large.
(larger than you might post on the web, such as a full size camera raw file)

Error when looking for updates

in the past 2 days when i try to search for updates in the app store app, i get this message:
"The operation couldn't be completed. NSURLErrorDomain error -1100
what does this mean? it just started doing this so im not sure, i havn't installed anything in over a week . anyone having this problem or solutions to it? thanks everyone

Most of use are having the same issue. It's an Apple problem that we just need to wait until they fix it.
In the mean time, if you were looking for the iTunes update, you can download it direct from here:
http://support.apple.com/kb/DL1576

Service Manager 2012 R2 Looking for the SDK method for Select All management packs OMCI Connector

Hi all,
I'm working through a script that updates the OpsMgr CI connector's MP sync list after a MP import. What I want to do is a Select All to sync the OpsMgr MP's I just imported into Service Manager. Just like checking the Select All
box after refreshing the connector in the GUI.
I have been through the cmdlets and looked at the assemblies in VS. I can't find the method that does this.
I found IsNullPropertySkipped under
Microsoft.EnterpriseManagement.ServiceManager.Connectors.OpsMgr but that's it
And nothing in here
Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.Connector
Must be missing it, and am not having much luck with TechNet.
Thanks much–Drew

I'm afraid you won't find a quick'n'easy solution for this. I'll start out by saying I don't know if Powershell has any cmdlets for this..but I know you can use the .NET SDK via powershell to do whatever you need to do. So my post focuses on the SDK/C#. You
should be able to adapt it in Powershell.
The function you want to replicate (check-all) is unique to the Operations Manager CI connector implementation and, as such, my post below may sound a bit overwhelming.
Let me start by describing where an OM CI connector's selected management packs are stored. They're stored in the connector's workflow rule (specifically, in its WriteAction module). Take a look at the ServiceManager.LinkingFramework.Configuration
management pack where all OM CI connector rules are stored. Look for a rule that starts with "OMConnector." (the dot will be followed by some random string of text and "_SyncRule"). Take a look at the <WriteAction> and you'll see an <MPList>
node that contains a bunch of <MPInfo> nodes. Each <MPInfo> node represents a management pack that was selected in the OM CI Connector wizard.
So, if I understand what you're trying to do, when you import a new MP into Service Manager, you want to add that MP to the OM CI connector's sync list. First; if that MP doesn't exist in OpsMgr, there isn't much point to adding it to the sync list, so I'll
assume you want to add MPs to the sync list that also exist in OpsMgr). Second; there may be other constraints on what MPs you can actually choose in that OM CI wizard and it would be wise to respect those constraints in your own solution. In any case, you'll
have to modify the OM CI connector's rule's write action. There are a couple approaches you can try.
You can try using Microsoft's helper classes that were built for OM CI Connectors (check out the OpsMgrConnectorHelper class and related classes in the Microsoft.EnterpriseManagement.ServiceManager.OpsMgrConnectorUtils.dll.
Also check out the OpsMgr connector wizard classes in the Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.dll).
The other possible approach is to modify the connector's rule directly using the SDK's ManagementPackRule and ManagementPackWriteActionModule classes. You can easily get your OM CI connector's rule using the management pack's "GetRule" method (or the EnterpriseManagementGroup's
Monitoring.GetRule method). The management pack rule has a "WriteActionCollection" which is a collection of ManagementPackWriteActionModule objects. There should be only one ManagementPackWriteActionModule in an OM CI rule's write action collection.
This object has a "Configuration" property..it contains a giant block of XML that holds all of the <MPInfo> nodes I mentioned earlier. So, you can modify that block of XML, then write the changes back to the management pack using the management pack's
AcceptChanges() method. Here's the basic structure:
ManagementPack mpLinkingFramework = emg.ManagementPacks.GetManagementPack(new Guid("50DAAF82-06CE-CACB-8CF5-3950AEBAE0B0")); //ServiceManager.LinkingFramework.Configuration
ManagementPackRule mpr = mpLinkingFramework.GetRule("<my connector's rule's name>");
ManagementPackWriteActionModule mpwam = mpr.WriteActionCollection[0];
String myConfig = mpwam.Configuration; //This is the XML block you want to update
myConfig = "<a modified configuration with my new <MPInfo> node>";
mpwam.Configuration = myConfig;
mpLinkingFramework.AcceptChanges();
Please note I haven't personally tried modifying an OM CI connector's rule using this method and I can't promise it will work..you'll definitely want to try it in a test environment first. But I can say I have modified my own connectors (and other write actions)
using this technique and it works fine. I just can't say for sure how it might affect an OM CI connector since I haven't tried it myself.
Though my post here is definitely _not_ a solution, hopefully it will give you some guidance on how you might approach your solution.
Maybe someone else here has personally used the OM CI connector classes and can give you some better insight.

My ipad stays in searching mode when looking for software update and doesn't give results

When I try to look for updates it is just searching and I even left it fir hole day and remained in search mode.

Had the same problem. Called Apple support. They claimed it could be a network problem since I did the download over wifi. They told me to try again using Itunes. When that didn't work, they said it was a corrupted itunes and I reinstalled it. During the reinstall, I tried it on another computer and it still did not work. After reinstalling itunes, I still got the corrupt message. Apple told me to go to my local Apple store and try their network. I was told that would do the trick. Guess what? It did not restore on the Apple network and the "Genius" tech person said that this error was similar to the windows "blue screen of death" and they could not repair it. Since the Ipad 2 was out of warranty, they offered me a replacement for $249 (no thanks) and said it was just one of those things. If anybody finds a fix, please let me know. I guess the lesson learned is NEVER download a new update the first day.

Agent install hang When Install by using remote desktop

Hi All
My Customer has some workstation,that were placed on branch office,occur some problem and he want to re-install.
When he using remote desktop to login/install, ZCM Agent install service will hang on "novell-rm-md-core". he test some times and get the same result.
But he call another admin install agent locally. agent install successfully.
Who have the same experience about remote install by using remote desktop(mstsc) ??
thanks
wyldkao

Originally Posted by wyldkao
Hi All
My Customer has some workstation,that were placed on branch office,occur some problem and he want to re-install.
When he using remote desktop to login/install, ZCM Agent install service will hang on "novell-rm-md-core". he test some times and get the same result.
But he call another admin install agent locally. agent install successfully.
Who have the same experience about remote install by using remote desktop(mstsc) ??
thanks
wyldkao
Windows XP right?
Then you need to install this patch before installing ZCM agent: An application that installs a mirror driver over a Terminal Services session may stop responding on a Windows XP-based computer
Thomas

System information when looking for storage info, also finder crashes

Can anyone help please!
My Finder crashes when doing simple tasks. Also, when loking for storage info in system info it crashes. All other system info works ok! Many thanks! New Mountain Lion Installed, problems since then!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Forte install hangs when looking for Java2 SDK

Similar Messages

Maybe you are looking for