Forté - Tivoli Integration
Hi Forté experts,Has anybody experienced the
integration between Tivoli
and Forté ?
What we would like to do is to monitoring a Forté
application using Tivoli.So we would like to be able
to inquiry Forté Agents
from Tivoli in order to have the same information
showed on Forté Environment Console.
We had a look to the Forté Shareware document related
to Forte Tivoli integration.
This document is dated end 1996 so probably in not
describing the latest integration capabilities between
Tivoli & Forté.
The document describes how to execute Forté Fscripts
and Escripts scripts using Tivoli Task libraries.
It also describes the use of Tivoli Sentry with 3
options :
1) Calling C shell that executes Forté commands and
send the response to Tivoli via the standard output.
2) Using Sentry API to communicate with Tivoli (is not
explaned on the document).
3) Using Tivoli WASYNC command in order to send
messages from Forté to Tivoli.
Looking at Tivoli documentation I found interesting
information about AMS (Application Management
Specification).
This Tivoli utility use an ADF (Application
Description File) in order to Monitor or Deploy
external application developed with tools like
Forté,PowerSoft ..
I hope somebody around the world has already used this
new integration feature.
Any help will be really appreciated.
----------------------------------------------------Massimiliano
Delsante
O.T. Consulting S.r.l - www.otconsulting.com
Via della Previdenza Sociale N° 11 - 42100 -
ReggioEmilia
Tel. +39 0522 271550 - Fax +39 0522 230710
Do You Yahoo!?
Il tuo indirizzo gratis e per sempre yahoo.it su http://mail.yahoo.it
Hi vikas and Frank,
Do you have any information related on How to enable the webservices in the GRC 10 (does NWBC holds the key). if you have any information related to it please share it with me.
Thanks and regards,
keerthi
Similar Messages
-
Re: Forte /FileNet integration
Hi Jelic,
We, at the County of Alameda, are using Forte and FileNet for some time
now.
As I was not clear on what specific interface issues you are dealing with I
thought it is a good idea to decribe what we are doing and hopefully that
may answer some of your questions.
For now, we are using FileNet's workflo language i.e. WFL scripts for
interfacing with FileNet.
The interfacing issues are :
1. Logon to FileNet on the client (Win95)
For logging on to FileNet we are currently using a C program which is
launched by our Forte application and is passed the Username, Password.
This program gets the window handle of the Logon Window and pokes in the
username and password in the respective fields and logs on. Its a hack but
it works well.
2. Display Images in FileNet's Image viewer - we use Windows DDE.
3. Indexing of documents both scanned and generated.
We have a document generation system which uses a FileNet macro for MS-Word
to save a document to FileNet. We also use FileNet's Scanning software to
scan documents. Both of these use a barcode to facilitate indexing. The
Indexer Program written in Forte launches a WFL script to get the
barcode/docID pairs from FileNet's distributor queues and indexes it with
the application database. It also laucnhes another WFL script which removes
the entries from the distributor queues and puts it into a error queue if
it was not indexed.
Going forward, we are now working on using WAL API to interface with
FileNet.
1. For FileNet Logon and Display : we plan to wrap C calls implemented as
DLL functions.
2. For the Indexer program too, we plan to wrap all calls we need in C
implemented as a DLL. Since the WAL API is available for Unix (HP_UX in our
case) we may create a library on Unix and run the Indexer Application as a
service object instead. This is one of the reasons we are not considering
using ActiveX.
Hope this helps.
Nitish Khanapure
Sage I.T. Partners
(415) 3927243 x313
Email : [email protected]
From: Jelic, Nenad <[email protected]>
To: 'Harry Richards' <[email protected]>; ', [email protected]'
<,[email protected]>
Cc: Ngai, Stuart <[email protected]>; Low, Louis
<[email protected]>; Jelic, Nenad <[email protected]>; Kapauan,
David <[email protected]>; '[email protected]'
Subject: RE: Forte /FileNet integration
Date: Tuesday, February 10, 1998 12:04 PM
Thank you for quick response. We are using
VB app with ActiveX controls and FileNet Image viewer(connected through
DDE) = CLIENT
accsessing FileNet IMS and Oracle DB = SERVER that is working very well
VB App + FileNet ActiveX Controls (client)
<------------TCP/IP-----------> FileNetIMS + ORACLE (server)
POINT 1:
Our intend is to replace VB App (written by somebody else) with Forte.
I've got tech. notes (SMALL prototype) from Forte consultant (Valerie
Limpan)how to implement ActiveX controls on server side because we don't
like to use ActiveX on each desktop, only on server side. But this is
not so common(Forte recommends using ActiveX controls with window
classes on client side) and I am afraid to go with a real BIG project
using something that is not proven very well ?
Forte(Client) <-----> Forte + FileNet ActiveX Controls(server1)
<------------TCP/IP-----------> FileNetIMS + ORACLE(server2)
POINT 2:
Probably, we can use WAL(C libraries) instead ActiveX controls, but from
pdf files I can not find any example. 1300 pages. Do I have to print all
of this to get better understandig ?
POINT 3:
Also, Is FileNet willing to support us using ActiveX controls inside
Forte dev. enviroment and other way round?
POINT 4:
Is FileNet Panagan suite of products will make any difference to our
problem ?
Sorry if some of this statement are wrong. My experience with both
products is limited, but not with ActiveX and OO.
Again, thank you for your quick response. May be this more detail
explanation will help you to find some answers.
Regards,
Dr. Nenad Jelic
(416)359-6560
From: Harry Richards[SMTP:[email protected]]
Sent: Tuesday, February 10, 1998 11:36 AM
To: Jelic, Nenad
Subject: Re: Forte /FileNet integration
I have just joined Forté from FileNET and so have a view on both
technologies, although I have not actually done any integration work.
Which
filenet products are you working with ?
You will find that both CSC and Sage, who host this mail forum are
involved
with or have already completed some integration with various filenet
products.
Regards,
Harry Richards
At 10:01 AM 2/10/98 -0500, you wrote:
We are trying to integrate Forte with FileNet software. Any experincein
real projects?
Using FileNet or any other ActiveX controls on server side ispossible,
but is not so common.
Regards,
Dr. Nenad Jelic(416)359-6560
[email protected]
----------Hi Satish
For information on Groupware Integration with CRM please refer to the link : http://help.sap.com/saphelp_crm50/helpdata/en/44/a0178800cd4f21e10000000a1553f6/frameset.htm
Also for integration of CRM Calendar with Groupware Calendar refer to the link : http://help.sap.com/saphelp_crm50/helpdata/en/bd/ad403d9e321d72e10000000a114084/frameset.htm
Regards
Note : Please award points if the answer is helpful. -
Forte' Shareware: Forte'/CICS integration
(I send again this mail, as I don't know if it has been properly
broadcasted.
So excuse me if you receive this mail twice.)
Hi All,
Recently I have downloaded the "Forte' shareware: Forte'/CICS integration"
solution from the Forte' web site.
Unfortunately I have audited that this solution has been developed for
"CICS for Windows NT Version 2" while we have installed "IBM Transaction
Server for Windows NT, Version 4" containing "CICS for Windows NT, V4" and
"CICS Client for Windows NT, V2.0.1.".
I have understood that in our installation the necessary libraries have
furnished with the CICS Client.
I tried to compile ntlisten.c : here is my make file.
NTLISTEN.MAK
ntlisten.exe: ntlisten.obj
link /nod ntlisten.obj cclwin32.lib libc.lib kernel32.lib user32.lib
gdi32.lib wsock32.lib
ntlisten.obj: ntlisten.c
cl /c /MT /DWIN32 /D_WIN32 /D_X86_=1 /DCICS_W32 ntlisten.c
The problem is that the "_beginthread" function doesn't come resolved.
ERROR LNK2001: Unresolved external symbol _beginthread
I have seen that inside the remarks the author declares that:
" I compiled it with this command:
cl /MT /D_WIN32 ntlisten.c wsock32.lib faacicnt.lib "
Therefore I think that the _beginthread symbol might be defined in the
FAACICNT.LIB library which however I am not able to locate in my
installation of CICS.
Any experiences would be appreciated.
Regards
Giuseppe Sorce
Giuseppe Sorce
CSI Piemonte
C.so Unione Sovietica, 216
10134 TORINO - ITALY
E-mail address: [email protected]
Telephone Number: +39-11-3168847I have the exact same problem.
Mine's WinNT4SP6a
Same versions of iWS and iAS.
One note is that the Dialog that pops up has wonky paths
D:\Netscape\Server4/bin/https/jar/IWSToolsIntegration.jar
Can anyone help either Vadim or myself?
Vadim Gorbounov wrote:
Hello,
Does anybody succeed in Forte 3.0 Enterprise Edition configuration?
I'm doing Win2000 installation, I have iPlanet WebServer 4.1 SP7 and
iPlanet AppServer 6.0 installed on this box. Forte 3.0 iPlanet plugin asks
me
for web server4 home directory during first start and than complains
about missing <server4>\bin\https\jar\IWSToolsIntegration.jar. I can't
find any IWSToolsIntegration.jar nowhere, neither no references in
iPlanet/Forte documentation.
Can anybody shed some light on this?
Thank you
Vadim Gorbounov
[email protected]
www.simplyengineering.com -
[Fwd: Information about Integration Forte-Tivoli.]
Hi all,
I already downloaded from the Forté site the document from Geoff
Puterbaugh on Integration with TIVOLI, but, some prospects ask us the
list of experiences and more general information on the subject.
Could you please provide some info on Forté - TIVOLI ?
Any suggestions or comments are most welcome!
Thanks a lot.
Regards,
Sandro GerardinHi vikas and Frank,
Do you have any information related on How to enable the webservices in the GRC 10 (does NWBC holds the key). if you have any information related to it please share it with me.
Thanks and regards,
keerthi -
Information about Integration Forte-Tivoli.
Hi all,
I already downloaded from the Forté site the document from Geoff
Puterbaugh on Integration with TIVOLI, but, some prospects ask us the
list of experiences and more general information on the subject.
Could you please provide some info on Forté - TIVOLI ?
Any suggestions or comments are most welcome!
Thanks a lot.
Regards,
Sandro GerardinIf you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N -
Active Directory - Forte/UDS integration
Does any body integrated Active Directory Server with Forte ?
We are trying to integrate Forte with Active Directory Server.
Our first step is to open a session on Active Directory from Forte and that was successful.
The second step is to bind to the Active Directory server so as to authenticate the user against the Active Directory service fails.
The error message is :- "ASN.1 Integer does not begin with 0x02 at offset 0".
we are using Forte/UDS 5.0.3 and Windows Server 2000 SP4 for Active Directory.
Any help you can provide in this matter is greatly appreciated
Thank you
SureshWe plan to install CRM 2007 ABAP+Java stack (dual stack).
I can tell you from my experience: avoid dual stack installations wherever possible because
- having to manage memory and resources for two engines running at the same time can be cumbersome
- you create a total dependency between ABAP + Java - means, if you e.g . run a portal and need to update the Java stack to a higher SP you have to also install the related ABAP SPs
- if you do release upgrades you have to run two upgrade processes in parallel since they will "wait for each other", you can´t upgrade separately
- depending on what database you use you must R3load to do system copies (no backup/restore)
Markus -
Re:Actuate & Forte Integration.
At 9:10 PM -0500 3/25/98, Andrew Leong wrote:
I am using forte (3.0.f.2) and actuate (3.0). And looking to see if we
can integrate actuate to my forte application directly, that is by
passing the informix database.I did a fairly extensive forte->actuate integration project. Although you
could theoretically call-in to forte from a C++ dll in actuate, the simpler
way (the way we did it) was to get a socket DLL ( I grabbed source for a
socket listener/writer off the web somewhere, but I don't have it handy)
and used forte's external connection class for the other end.
The scenario is:
Forte has a listener on a pre-defined port (pick one)
Simple formatted requests are sent to forte from actuate (e.g., the message
'report1 1,2,3\n ' would run a forte command called report1 with args 1,2
and 3)
Forte processes the command and sends back the results in tab delimited
form.
Actuate reads the results a line at a time and formats the data.
Worked well, took about a week to develop and is reliable.
rick
Rick Frankel
cyberCode Consulting, Inc.Andrew,
There is some stuff on the shareware section of Forte's web site. I think
it is just the wrappering of the C-API's
Regards,
Richard Stobart
Consultant, ECSoft, UK
101 Wigmore Street
London W1H 9AA
(0171) 355 1101
-----Original Message-----
From: Andrew Leong <[email protected]>
To: '[email protected]' <[email protected]>
Date: 26 March 1998 03:30
Subject: Actuate & Forte Integration.
Hi,
I am using forte (3.0.f.2) and actuate (3.0). And looking to see if we
can integrate actuate to my forte application directly, that is by
passing the informix database.
Opinions are welcome.
Andrew Leong
Manager Project & Network
Kontena Nasional Berhad
email : [email protected]
tel : 603-774-0928 fax : 603-774-0652 -
Forte Integration with AS/400
Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>You can also investigate using IBMs MQ Series. Other message oriented
middleware may also have AS/400 ports available (such as Tuxedo).
-J
Mike Burke wrote:
>
Could you please provide some more information on what you plan to do
here? Are you looking to just pull data from the AS/400? Will you be
sending data back to the AS/400?
The AS/400 has supported Berkley Sockets; since, Release V3R1. Your
best bet for now is probably to use Forte's ExternalConnection class to
communicate with a C socket provider/consumer on the AS/400 side.
Please see Forte's "Integrating With External Systems" manual for
further information on the ExternalConnection class.
Also, I heard a couple of months ago that IBM plans to incorporate a
fully compliant CORBA ORB in a future release of OS/400. I haven't
heard if they have followed through on this. If so, CORBA would provide
another means for you to communicate with your AS/400 from Forte.
- Michael R. Burke
Born Information Services
e-mail: [email protected]
-----Original Message-----
From: Wei Suen Lai [SMTP:[email protected]]
Sent: Thursday, June 11, 1998 5:29 AM
To: Forte User Group
Subject: Forte Integration with AS/400
Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really
urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>--
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
http://www.sageit.com
----------------------------------------------------- -
WG: Integrating an SCM within Forte
Hello,
we have implemented an integration of PVCS in Forte. A Forte Consultant did
this for us. You can use hooks which are provided by Forte when integrating
into the forte repository. At this point you can export the workspace and
put the exported files afterwards into PVCS. There are some things to
organize around this process.
Forte doesn't provide any SCM, but you need some solution. Forte writes all
information into a repository, while PVCS bases on files. This is a little
complicated and not very nice.
More information about the hooks you can get directly from forte.
Hope this helps you a little.
Many regards
Silke Schulte
Union Investment GmbH, Frankfurt / Main, Germany
[email protected]
Von: owner-forte-users
An: '[email protected]'
Betreff: Integrating an SCM within Forte
Datum: Donnerstag, 19. M{rz 1998 09:47
Good morning,
Could someone tell me if they have had any luck integrating a third-party
software configuration management system (such as PVCS Version Manager)
with Forte? If so, could you share enough information with which I can
begin such an endeavor?
Thanks ever so much!
Geoffrey Whittington
Software Engineer, Descartes Systems Group Inc.
[email protected]
(519)746-8110 x2333Hello,
we have implemented an integration of PVCS in Forte. A Forte Consultant did
this for us. You can use hooks which are provided by Forte when integrating
into the forte repository. At this point you can export the workspace and
put the exported files afterwards into PVCS. There are some things to
organize around this process.
Forte doesn't provide any SCM, but you need some solution. Forte writes all
information into a repository, while PVCS bases on files. This is a little
complicated and not very nice.
More information about the hooks you can get directly from forte.
Hope this helps you a little.
Many regards
Silke Schulte
Union Investment GmbH, Frankfurt / Main, Germany
[email protected]
Von: owner-forte-users
An: '[email protected]'
Betreff: Integrating an SCM within Forte
Datum: Donnerstag, 19. M{rz 1998 09:47
Good morning,
Could someone tell me if they have had any luck integrating a third-party
software configuration management system (such as PVCS Version Manager)
with Forte? If so, could you share enough information with which I can
begin such an endeavor?
Thanks ever so much!
Geoffrey Whittington
Software Engineer, Descartes Systems Group Inc.
[email protected]
(519)746-8110 x2333 -
Testing in Forte: Good News :-)
Hi
The purpose of this message is to address some inaccuracies in the attached
message regarding testing tools. I thought I would share with you all what
I found out about testing tools that work with Forte.
I heard back from Forte users about two testing tools:
1) Mercury LoadRunner / WinRunner etc.
2) ClassIQ's product called IQTest
Mercury
I spoke with a Mercury representative today who listed for me several sites
which are successfully using Forte with Mercury (one of these sites is even
located here in Australia!). The problems described in the attached
message or accurate; however, the workarounds are documented and easy to
understand.
You can use Mercury today with Forte.
In addition, Mercury has been working for several months now on an even
tighter integration with Forte. This project has been extremely
successful. There is at least one Forte site in the USA which is using
this Forte/Mercury integrated product. According to the Mercury rep, the
Mercury/Forte tighter integration is now in beta testing and should be
production in May/June 1997. This information was verified by my contacts
at Forte HQ. If any of you need more detailed information than this please
contact me or your Mercury representative.
ClassIQ
ClassIQ currently has a small number of sites using its testing tools which
are written in Forte. Needless to say, ClassIQ is very tightly integrated
with the Forte environment. If you would like to know more about ClassIQ
contact Joe Burns at 105210,[email protected].
I am sure there are many other people using other testing tools with
Forte....these are just the two I have heard about in the initial responses
to my query. I would love to hear about other testing tools which work
well with Forte.
Regards,
Eric
At 11:19 AM 2/19/97 +0530, you wrote:
Hi,
We evaluated quite a few test tools in relation to the forte
environment. All of them have the same problem : The inability to
correctly map Forte widgets. Most of them cannot recognise
Outlinefields, ArrayFields etc. Even if they do recognise a forte widget
only basic properties like the size of the widget, its position on the
screen etc. are recorded. Data contents of the widget are not
recognized.
To clarify the above points : Given a screen with a TextData widget, you
can record and playback this sequence without any problems with most
Test tools :- Position the mouse on the widget, Type 'Testing' .
Ideally, the TextData widget should have a property 'Content' or 'Value'
(different test tools call it differently) which will have the value
'Testing'. In case of forte this does not happen. What is recorded are
the low level mouse movements or keyboard strokes. The position on the
screen where the value is typed is recorded and played back.
Low level recording maybe acceptable in some circumstances but say - you
have a widget which gets populated by a database query. How will you
test the values displayed ?
Some of the test tools are customizable i.e. you can actually create a
widget class of your own and try to map it to a recognized (by the Tool)
widget class. This will be a time consuming process with a great deal of
trial and error and no guarantees of success.
If the sole objective is navigate through screens and record and
playback, then most of the automated test tools work. If you want to
make full use of a test tools capabilities and want to go further and
intelligently record and playback, most test tools have very very
limited use.
Discussions with Test tool vendors have revealed the following :
- Forte has not released a Test API to any particular vendor or the
market at large
- Forte implementation sites are at the moment too few for any test tool
vendor to invest in Research and Development and come out with a Test
API.
So as it goes the chances of a fully compatible Forte test tool in the
near future are remote.
Forte's own AutoTester project has a limited usage. My own evaluation is
that it cannot be used for big sized implementations. Along with other
limitations, test management facilities that are particularly relevant
for big sized implementations simply don't exist with AutoTester.
The only product in the market that is Forte specific and is more a
testing Framework than a tool is TestIQ from ClassIQ. I am keen to get
information about TestIQ from any of its implementation sites. Again I
am not sure about its test management capabilities.
Hope the information helps,
Parvathi Iyer,
[email protected]
From: David Campbell[SMTP:[email protected]]
Sent: Tuesday, February 18, 1997 2:08PM
To: [email protected]
Subject: Development tools
Hi all,
We are about to embark on a sizable Forte development and are interested
in hearing from anybody who has successfully used automated test tools
with Forte. Also, does anybody know of a problem tracking tool that can
be linked to the Forte source repository for the purpose of tracking the
status software bugs, fixes etc.
Thanks,
David Campbell
System Consultant
CSC Australia
From: [email protected][SMTP:[email protected]]
Sent: Tuesday, February 18, 1997 11:58 PM
To: [email protected]
Subject: Automated test tools
I've read about Capture/Replay and played with the AutoTester project a
little. I'm curious as to the experiences that developers have had with
using these tools to automate testing of GUI applications. Has anyone
actually deployed an application that successfully uses these tools? How
does it compare against other automated test tools?
One limitation that I see with using Capture/Replay is that any non-Forte
client interfacing with my Forte code would not be able to use this
mechanism to perform its auto testing. Also, while playing with the
AutoTester I actually got a playback which was slightly different than what
I did while doing the capture.
Thanks,
Jim Hancock
[email protected]
--_|\ Eric Gold
/ \ Technical Director
\_.--._* Forte Australia
v Voice: 61-2-9926-1403
Fax: 61-2-9926-1401
http://www.forte.com
He is happiest who advances more gradually to greatness.
-- Adam SmithThanks for the news Nancy!
-
RE: (forte-users) R: (forte-users) ASP andForté
I think you should also be able to publish the Forte Service Objects as DCOM
services. Then you can access them from within VB-scripts.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
-----Original Message-----
From: Massimiliano Delsante [mailto:delsanteotconsulting.com]
Sent: Friday, February 23, 2001 9:54 AM
To: BOLIVARD Kenny; forte-userslists.xpedior.com
Subject: (forte-users) R: (forte-users) ASP and Forté
Hi Kenny,
I suggest you to use XML in order to publish your Forté services.
There is a Forté Library called HTTPDC that let you start up a listener that
answer to HTTP Request.
So you will have a ASP/Forté integration via HTTP/XML
Hope this helps.
----- Original Message -----
From: BOLIVARD Kenny <BOLIVARDPREVIADE.FR>
To: <forte-userslists.xpedior.com>
Sent: Friday, February 23, 2001 8:43 AM
Subject: (forte-users) ASP and Forté
Hi everybody!
I'm a new Forté developer, so i have some question about it, speciallyone:
I want to access Forté service objects through an ASP script. To be more
precise, I want to get back some informations (like, for exemple, the
information of a customer's account) from the Forté world and to make-upthe
web page in my ASP script.
Is it possible writing an ASP script (in VisualBasic for example) witch
calls Forté service objects?
How can I do that? Maybe by using Web Enterprise's libraries, but itseems
to me that Web access service objet returns only HTLM pages.
Any suggestions and explanations would be appreciated.
Thank's in advance for your replies,
Kenny,
PREVIADE.
France.
Ps: Sorry for my bad english. ;))
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comIl suffit de mettre les BTD/BTX sur un drive réseau (net use X:
\\server\share_point),
puis d'installer des icônes pour les clients: ftexec -fi bt:x:\MyApp.
Pour que les noeuds ne s'auto-enregistrent pas, peut-être mettre un password
Ou bien définir les noeuds comme un 'groupe' et donc seul le groupe est
connu.
Si mettre le mot de passe suffit pas, et si vraiment le model node gêne,
alors il
faut un autre environment manager.
I think that to avoid install, the software could be located on a shared
drive,
and users linking to it through running 'ftexec' or directly the compiled
binaries.
For nodes not to appear in the environment as nodes, they could be defined
as members
of a model node '(which then would be in the environmnet)'
Putting a password in the environment could prevent nodes to be registered
there, but
might prevent the apps from being executed.
Cheers,
j-paul gabrielli
Sema DTS
-----Message d'origine-----
De: Thomas Felix [mailto:tfelixaxialog.fr]
Date: mardi 2 mai 2000 14:14
À: forte-userslists.xpedior.com
Objet: (forte-users)
bonjour a tous
je souhaites installer une application distribuée sur des postes clients.
Y'a t'il moyen de ne pas installer les noeuds de ces postes clients sur l'
active environnement lié au développement et si oui comment?
hi
I would like to install an application on clients workstation
Can i install this nodes in a different Active environnement than this one
that we use for the developpement ?
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
How have people done Forte application to Forte applicationcommunicatio
I was wondering what architectures folks have been using to do Forte
application to Forte application integration on the client and at the server
level?
connected environments?
CORBA/IIOP?
Message Oriented Middleware?Hi,
I have used MQSeries and CICS Client. They worked well, except that CICS Client
is for little applications... Tuxedo has also good reputation.
You should also consider a lower protocol like TCP/IP. I use it in synchrone and
asynchrone to support an application protocol with external connections. It
works very well. For instance, It can be an alternative to connected
environments, even for Forte Partitions (for example : you need to connect
several thousands of Forte clients without having to maintain your central
environment).
For asynchrone communcation, and low cost and equipment (external clients, B to
B, etc...) you can also use SMTP with external connections. If you use MIME base
64, you can also transfer serialized objects for instance. Then you can use SMTP
like VMS Mailbox (in old times). Be aware, of course, that you will not have any
delivery warranty on your messages, so you should take care about this on your
protocol.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Edward.CarmodyLibertyMutual.com a écrit:
I was wondering what architectures folks have been using to do Forte
application to Forte application integration on the client and at the server
level?
connected environments?
CORBA/IIOP?
Message Oriented Middleware?
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
R: (forte-users) ASP and Forté
Hi Kenny,
I suggest you to use XML in order to publish your Forté services.
There is a Forté Library called HTTPDC that let you start up a listener that
answer to HTTP Request.
So you will have a ASP/Forté integration via HTTP/XML
Hope this helps.
----- Original Message -----
From: BOLIVARD Kenny <BOLIVARDPREVIADE.FR>
To: <forte-userslists.xpedior.com>
Sent: Friday, February 23, 2001 8:43 AM
Subject: (forte-users) ASP and Forté
Hi everybody!
I'm a new Forté developer, so i have some question about it, speciallyone:
I want to access Forté service objects through an ASP script. To be more
precise, I want to get back some informations (like, for exemple, the
information of a customer's account) from the Forté world and to make-upthe
web page in my ASP script.
Is it possible writing an ASP script (in VisualBasic for example) witch
calls Forté service objects?
How can I do that? Maybe by using Web Enterprise's libraries, but itseems
to me that Web access service objet returns only HTLM pages.
Any suggestions and explanations would be appreciated.
Thank's in advance for your replies,
Kenny,
PREVIADE.
France.
Ps: Sorry for my bad english. ;))
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comSorry for the mistake... I talked about the notification patner.
Daniel Nguyen a écrit:
Hi,
Use the Notication patner. You can find a sample and some explanation on
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
DARTIGUENAVE Antoine a écrit:
Bonjour,
la gestion d'un cache de données de référence dans une application TP
serveur permet le raffraichissement
du cache quand l'appli a signifié un update .
Or un batch ( appli distincte ) mettra aussi à jour ces données.
Comment signifier à l'IHM qu'une donnée a été updatée ce qui lui permettra
de rafraichir le cache à la lecture ?
merci d'avance pour toute idée sur ce sujet !
Antoine Dartiguenave
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
Forte Developers available to work anywhere in US
Twenty three Forte developers with middleware integration exposure, VB/VC
Front end - Forte Integration experience, Forte-Visigenic integration
expertise, are available for work anywhere in the US on a
contract basis from Total It Solutions Inc, Santa Clara, CA.
Interested parties please contact K S Reddy on 408 396 8456 or 408 727 8200.
K S Reddy
Total IT Solution Inc.
Suite 445, 4677 Oldironsides Dr.
santa Clara, CA 95054
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>I activated mine from Oklahoma to use it in PR. There
aren't any long distance/roaming charges since
National plans include PR and US Virgin Islands in
AT&T's coverage area. You can even activate it from
PR provided you have an US address (friend or
family), as soon it is activated you can change the
address back to a local one as I did. However you
won't be able to change the area code to 787 'til the
iPhone is released in the island. Im back in the
island and I'm happy with my 918 area code until
then...tirame un email y hablamos...
Saludos,
Yo voy a salir de viaje a Orlando la semana del 22 al 28. Espero poder conseguirlo en ese tiempo y activarlo alla para usarlo como tu actualmente. Estuve revisando los post tuyos y parece que no has tenido ningun problema con el funcionamiento de todos los features. Eso es asi?, recives los email y los contestas sin problema? haces search en safari? Coño... esta brutal? dame mas detalles.
No encontre tu e-mail address si quieres me puedes escribir a [email protected]
PRO Mac OS X (10.4.9) -
Hi
I'm interested on the future of Fortè
I've heard that iPlanet (the new application server of SUN) does not support
forte and does not intend to do it.
So I'm wandering where Fortè will go.
I hoped to see Fortè integrating with Java and hoped that SUN wuold have given a
strong indication in that direction, but it seems that we will have to decide
wheather to stay on Fortè or start using Java.
Can someone shed some light on the subject.
TIA
LucaHi
I'm interested on the future of Fortè
I've heard that iPlanet (the new application server of SUN) does not support
forte and does not intend to do it.
So I'm wandering where Fortè will go.
I hoped to see Fortè integrating with Java and hoped that SUN wuold have given a
strong indication in that direction, but it seems that we will have to decide
wheather to stay on Fortè or start using Java.
Can someone shed some light on the subject.
TIA
Luca
Maybe you are looking for
-
How to encrypt the data in a form?
Hi, everyone! I want to encrypted the data in a html form sent to a JSP/Servlet (using POST method). For example, password. How to do it? Are there some sample codes or guides? Cheers, George
-
How can I restrict field lengths in a field?
I have a field that I want the user to only enter a 5 character response, not a 4 or 6 character response. Is '?????' field validation the only option?
-
700P/Verizon: Cannot find some contact photo files?
Hello, I have a Treo 700P (on Verizon) that I'm trying to get all of my data off. I noticed that some of my contact photos that were taken with the Treo camera while editing the contact are NOWHERE to be found either on the external memory card tha
-
Hot to touch and battery drained
Has anybody's Iphone5 is ever hot to touch and battery drained at the same time.
-
CSCtz15346 - /mnt/pss directory growing too large and having no free space
hello, Nexus 3K switch is not allowing me to save the configuration, showing the below message. switch %$ VDC-1 %$ %SYSMGR-2-NON_VOLATILE_DB_FULL: System non-volatile storage usage is unexpectedly high at 99% switch# switch# copy