Fortigate on Windows Server Problem

Someone suggested I post this question here...hopefully, this is the right place, and someone can give me an answer.
I was just given a new Mac Pro with OS X 10.6.8. Previously I was working on a Windows machine.
Switching over went well...I have access to the Exchange Server and am able to get all of my email. I can also access the Windows server volumes and have no problems with that.
My problem is that I'm hitting a wall (literally) with our company's Fortigate Firewall. On my Windows machine, I had full access to the internet. But, with my Mac, for some reason, Fortigate is not seeing me as logged in as a Fortigate user, so, I'm blocked. Unfortunately, our "IT Manager" is someone who hates the Mac platform, was unwilling to approve the purchase of a Mac, then basically said that I was on my own as far as technical support. We do have an outside agency that handles all of our tech support (our "IT Manager" is basically just a liason for the off site support company), but the off site support company also seems to not know a whole lot about Macs.
When I asked the off site company about possible solutions to my problem, our "IT Manager" got involved, did some ranting about the incompatibility of Macs, and I was basically told:
A Mac, as it does not perform NTLM authentication to the domain by default, will not be able to authenticate and show up as a user in the FortiGate. It will continue to fall into the ‘guest’ account category.
There are three ways around this:
Add the Mac to the domain and make it login every time (this will present other management overhead issues regarding file share access, printer access, etc., which can certainly be taken care of, it will just be about 1-2 hours of on-site work to test and configure completely).
Give the Mac a ‘sticky’ DHCP address so that it uses its own UTM policy on the firewall (easy way out).
Create an approved corporate IT policy and force her to use a PC by disallowing non-Windows based PCs on the network as they present an unmanageable security risk (Macs are usually supported on Windows-based networks in corporate environments, but only on a best-effort ‘you-choose-it-so-you-support-it’ basis).
I then asked the off site support company whether or not I can configure my Mac to use a proxy server ip address and solve the problem that way, and I was told that the firewall "was not set up that way."
I know that Fortigate is compatible with Macs, and it just seems like this is being made out to be more difficult than it has to be. I'm ok with doing my own tech support for my Mac, but the IT people I'm dealing with just seem to either refuse to give me any useful information, or just seem to not know what they're doing (which is typical). I hate to keep going to our IT people with this problem, because every time I do, I (and my boss) get an earful about how Macs are incompatible and we should not have allowed the Mac on the network in the first place.
So, I guess my question is: Is there a way that I can set this up myself on my end so that the Fortigate Firewall will see me as a registered user? Or are the solutions listed by our support service the only options for me?

Maybe it's a little late, but if it helps someone.
I have had the same problem and the cause was that the host name was too long.
I put a name shorter and the error has disappeared

Similar Messages

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Add-on installation problem in Windows Server 2003

Hi guys,
I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
Unable to load AddOnInstallAPI.dll
and when i try install using the same installer at the client station, everything is ok.
Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
Thanks you,
Harianto Ng

I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
Natalya

Java2SDk 1.4.2.06 installation problem on Windows Server 2003

I tried the installation of Java2SDk 1.4.2.06. ,I tried this, but it fails to complete and NO directory folder is created so I cannot continue with the proccess. The OS is Windows Server 2003.
I have done the following procedures:
Enabled/Disabled the IIS configuration
Enabled/Disabled the Windows Firewall
Enabled/Disabled Antivirus software
The error in the event log is:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 3/6/2007
Time: 2:23:49 PM
User: N/A
Computer: GERSSERVER
Description:
Faulting application msiexec.exe, version 3.1.4000.1433, faulting module unknown, version 0.0.0.0, fault address 0x0013b43e.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 73 69 ure msi
0018: 65 78 65 63 2e 65 78 65 exec.exe
0020: 20 33 2e 31 2e 34 30 30 3.1.400
0028: 30 2e 31 34 33 33 20 69 0.1433 i
0030: 6e 20 75 6e 6b 6e 6f 77 n unknow
0038: 6e 20 30 2e 30 2e 30 2e n 0.0.0.
0040: 30 20 61 74 20 6f 66 66 0 at off
0048: 73 65 74 20 30 30 31 33 set 0013
0050: 62 34 33 65 b43e
Please advice on this problem. Other tech support recommendations were to reinstall the OS.
I have also tried installing the latest version of Java 2 SDK without success.
Thanks for your support
William Hernandez
UPR-Mayaguez Campus

Thank you so much for your help!
I have just tried as you said. Now I see that actually at the beginning of the intallation, there is a NullPointerException. Here is the error information:
===============================
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
java.lang.NullPointerException
at sun.java2d.SunGraphics2D.revalidateAll(SunGraphics2D.java:2086)
at sun.java2d.SunGraphics2D.drawString(SunGraphics2D.java:2536)
at com.sun.wizards.awt.Header.paint(Header.java:112)
at sun.awt.RepaintArea.paint(RepaintArea.java:177)
at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:260)
at java.awt.Component.dispatchEventImpl(Component.java:3678)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
===============================
Please help me out of this. Thank you.

Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

Hi all,
During the installation of the LMS-4.2,
It passed the "Initializing" and "Copying" stages,
but, in the "Configuring", it never finishes,
Anyone had have a similar problem?
the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

Thanks for the update. Glad to know it has installed now.
There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
Also, LMS is not supported in other languages installers or setups except English and Japanese.
There are a couple more things you can do/check prior to running the installation.
LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
To check naming convention you can run the following command from Windows Command prompt:
cmd>fsutil.exe 8dot3name query <Drive>
Example:
C:\Users\winlau>fsutil 8dot3name query C:
The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
Based on the above two settings, 8dot3 name creation is enabled on C:.
8dot3 needs to be enabled for all drives LMS will potentially use, including:
Drive where TEMP/TMP is located
The drive LMS is installed to
The drive LMS backs up to
Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
Sample command to enable globally:
"fsutil 8dot3name set 0"
Sample command to enable on one volume:
"fsutil 8dot3name set X: 0"
Note that this needs a reboot to take effect. You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:).
For further information http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
-Thanks
Vinod
**Encourage Contributors. RATE them**

Problem instaliing sun one LDAP server on windows server 2008 r2

Hi all ,
I am trying to install Ldap server (Sun ONE Directory Server) on windows server 2008
I am using apache-tomcat-7.0.28 and java jdk1.7.0_05
I am following this manual for installing :
https://blogs.oracle.com/marginNotes/entry/installing_directory_server_enterprise_edition1
I have a problem with the cacao agent and how to install it .
I've got this error message :
c:\Program Files\Sun\dsee7\bin>dsccsetup cacao-reg
Configuring Cacao...
## Failed to run "c:/Program Files/Sun/dsee7/ext/cacao_2/bin/cacaoadm.bat" set-
aram "jdmk-home=c:/Program Files/Sun/dsee7/lib/private"
#### Cannot create service for instance: [cacao.instance.name].
#### Cannot perform firstime inialisation and configuration.
## Exit code is 1
Failed to configure Cacao.
I stuck and with no other solutions . I hope if you could to help with this issue .
i will glad to know if there is any other ways to install this specific Ldap server ,
Thanks,
Alon

You most likely skipped the step of starting the installed server prior to trying to access admin URL. Please check this document:
http://docs.sun.com/source/817-1830-10/win.html
Relevant section is:
You can start the Administration Server in either of the following ways:
# Select Start Menu -> Programs -> Sun ONE Web Server, and choose Start Web Server Administration Server.
# From the Control Panel�s Services item.
HTH...

Problem of SAPConsle 7.10 (Patch 13) on Windows server 2008 R2 (64bit)

My company is moving from server 2003 to Server 2008 R2 (64bit). We installed SAPConsole 7.10 (Patch level 13) on test server without any problem and configured the profiles in SAPConsole administrator. However when we running the sapcnsl.exe from command prompt, it prompt with error message "*** ERROR => ***AgCom (006FC558): Error: Internal error" and failed to get the SAP login screen.
I checked SAP Note 1043241 saying SAPConsole 710 as patch level 7 could support Windows server 2008 (32/64bit) both.
Can anyone help advise on my issue? or is there anyone has testl the SAPConsole 710 on Server 2008 R2 64bit successfully?
Thank you very much!

Hello Jackcd,
I am not an expert in this area but I did a message search for "AgCom error internal error" and I found a message where the customer solved the problem by using a patch. In the customers own words:
"I installed sapgui 7.10 Patch level 6 on the server where I installed SAPCONSOLE 7.10. Now, the sapconsole working."
The Sapinator

Application/DLL problem on Windows Server 2008 R2

I have an issue with an application which needs to run on a Windows Server 2008 R2 environment. The issue concerns "msvbvm60.dll" which results in an "APPCRASH" when I try to run the application.
The APPCRASH reports the issue is with msvbvm60.dll version number "6.0.98.15". We have another customer with Windows Server 2008 (not R2) which has version "6.0.98.2" of the same file and the application works fine there.
I've got 2 questions really then ...
Could I replace the .15 version with .2? There appear to be 2 "system" folders on the server "C:\windows\system32" and "C:\Windows\syswow64" - would both of these need to be addressed
Would a later version than .15 cure the problem?
I've trawled this site but unable to find an exact solution or advice that fits my situation.
Thank you.

Which application? Is that a Microsoft product? If not, I would suggest you contact the software developer for assistance.
---Could I replace the .15 version with .2? There appear to be 2 "system" folders on the server "C:\windows\system32" and "C:\Windows\syswow64" - would both of these need to be addressed
Yes, you may give it a try. Usually, put it in WoW64 folder if it's a 32bit DLL. Otherwise, put it in System32 folder.

EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- Neil

Hi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28080
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address          :28443 (SSL)
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>-----

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Windows Server 2008 R2 problem

Hi there
I'm a newbie to Flash media server and I would like to explore its usage.
Does any one have experience with Flash Media Server 3.5.3 running on Windows Server 2008 R2? I installed FMS on my Windows Server 2008 R2, but the admin console cannot start.
By the way, I installed FMS on a Windows Server 2003 32-bit machine. And I'm able to use the admin console on Server 2003 to connect to the Server 2008 R2 installation.
Also, I have a separate disk that is used to hold the media content to be streamed via FMS. How can I configure FMS to use that disk as root for media file instead of using "c:\program files (x86)\...\webroot\vod"
Thanks very much in helping me to start the project.
Best Regards
Steve Yau

ForThanks very much for your prompt response.
For (1), if I start "Flash Media Administration Console" from the Start menu, an IE prompts up and it tries to open "c:\program files(x86)\Adobe\Flash Media Server 3.5\tools\fms_adminConsole.htm" with the following in the information bar:
"An add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts"
I thought it was the problem of flash player that cannot be run on 64-bit IE, so i tried 32-bit IE, but still in vain. I also tried to install flash player using 32-bit IE on Windows server 2008 R2 but the installation cannot start.
The FMSAdmin service is surely running with firewall configured. I've also installed FMS on another Windows Server 2003 32-bit. There I can start the admin console and connect to the Windows Server 2008 R2 FMSAdmin service.
For (2), I've added the line as per your kind help. But my question will be: How can I test whether my FMS is correctly streaming the video? For Windows Media Service, I can easily open URL in WMP and the streaming can be verified easily. But I don't know how to test FMS setup from web client side. Any clues? For your information, I don't have Adobe Flash or Dreamweaver stuff.
Thanks again for your kind help
Regards
Steve Yau

Problems PXE booting Gen 2 Virtual Machines after Upgrading to Windows Server 2012 R2

My Current Setup:
I have two virtual machines set up with Hyper V on my Windows Server 2012 Server.
VM1: Configured to boot from an ISO file and runs Clonezilla server.
VM2: Configured to PXE boot using a legacy network adapter, and with a passthrough 250Gb hard disk.
These two VMs are connected to an external Virtual Switch, which allows physical machines to PXE boot to the Clonezilla server.
For the past few months I have been using this setup for two purposes:
1. To clone physical machines to the Clonezilla virtual server (as a backup).
2. To restore those image to the second VM if I find that need to get access to the files on the original image..
This has worked perfectly, except for the fact that the speed of the legacy network adapter on the second VM (which is required to PXE boot) is very slow. But I know this is because of the limitations in how the legacy adapter works...
Now my problem:
I found out that Gen 2 VMs allow you to PXE boot without having use a legacy network adapter, allowing me to image back to the VM faster. So I upgraded the Server to Server 2012 R2 . I then created the same two virtual machines on the R2 server. I can still
PXE boot the Gen 1 VM to the Clonezilla Server but I cannot get the Gen 2 VMs to PXE boot properly. They get an IP address from the Clonezilla Server but then just stop with the following screen. (note: I have disabled the Secure Boot).
Are Gen 2 VMs unable to pull down images from anything other than a WDS Server?

Hi J,
>>Unfortunately WDS is not a solution for us as it is dependent on the PC being part of a domain
If you would like to make the client not join to the domain, please check the box before “Do not join the client to a domain after an installation.” In addition, make sure not to set the client to the domain in the unattend file and do not prestage
the computer in AD. "
It is quoted from following thread :
https://social.technet.microsoft.com/Forums/windowsserver/en-US/1026c3a9-0a10-4a58-a48f-5391659a96c8/wds-set-unattend-file-for-workgroup?forum=winserversetup
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2008 Problems

Development Platform:
Visual Studio 2003 (VB)
Crystal Reports XI Developers Edition (Version 11.0.0.895)
Developed on Windows XP (SP3)
Deployed (VB) Program Normally Runs Windows Server 2003 (No problems)
Problem: Cannot run on Windows Server 2008 (32 Bit nor 64 Bit Versions)
THREE QUESTIONS:
Q1. Is the CR XI Dev Ed (11.0.0.895) the same as CR XI R1?
Q2. Is there a known conflict between this version and Windows Server 2008 ( either 32 Bit or 64 Bit)? If so, is there a fix?
Q3. There is a service pack (SP4) which is for CR XI R1. Does this apply to my version of Crystal Reports? Are there updated Merge Modules as well?
The program deploys to both versions of WS 2008 fine. However, it does not work on either. The errors are different. On the 64 bit version, a simple u201Ccannot access the file in c:\windows\tempu201D message. Permissions have been checked and are ok. On the 32 bit version, we get a 503 error (Service Unavailable) and the Internet Server gets u201Chungu201D and will not clear without a reboot of the machine, literally.
This is an updated question to an eariler post, which is unresolved. Many thanks to whoever can help.

Hi David,
Q1. Is the CR XI Dev Ed (11.0.0.895) the same as CR XI R1?
answer- Yes, both are same
Q2. Is there a known conflict between this version and Windows Server 2008 ( either 32 Bit or 64 Bit)? If so, is there a fix?
Answer-
unfortunately my help is very limited in this scenario.
Please do not deploy CR XI to win2008 OS.
This OS is not tested and not supported with CR XI.
Please see a full list of supported OS [here|https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000086718&_OBJECT=011000358700001092722008E]
Even the latest edition Reports [XI Release 2 u2013 Service Pack 4|https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000086812&_OBJECT=011000358700001080932008E] is not supported for Win2008.
Q3. There is a service pack (SP4) which is for CR XI R1. Does this apply to my version of Crystal Reports? Are there updated Merge Modules as well?
Answer- Yes, that SP4 is for CR version 11.0 - to download click [here|http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR1].
Latest merge modules for CR XI R1 SP4 can be downloaded from [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#05]
Hope that helps!!
Regards,
Amit
Best regards

Fortigate on Windows Server Problem

Similar Messages

Maybe you are looking for