Forum ate posts from IE9 Beta

I tried to post a reply to a thread using IE9 Beta, and the text of the post was completely eaten. The post itself still appeared though, just without any body. Seems a pretty disastrous issue, as when you press "back" you won't get the message box filled in as you would with most other sites. So if you forgot to backup your text to the clipboard, you'll have to remember what you wanted to say before switching to another browser. Could someone look at this? I know IE9's still in beta but it shouldn't break with simple forum code...
The posting experience was broken too - clicking in the text box doesn't move the cursor so you have to use the keyboard. It won't even register clicks at all except for a tiny region at the top-left of the box.

Try it in compatibility mode
. . . it must be remembered that the sea is a great breeder of friendship. Two men who have known each other for twenty years find that twenty days at sea bring them nearer than ever they were before, or else estrange them.

Similar Messages

  • Remove all the "Moved" posts from the Welcome & FAQ forum

    Could someone please clean up those unsightly "Moved" posts from the Welcome & FAQ forum?

    I deleted them all since the most recent was several weeks old.  That doesn't, however, mean that more won't be added as questions are mistakely placed there and then moved to the proper board.  Perhaps your earlier suggestion of locking it as an announcement-only board is one that we should consider.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • NEW FORUM DESIGN: Post Feedback Here

    Posting everything in one place will allow Comcast to better monitor what feedback is given.

     andyross Member Since: ‎10-17-2003 Posts: 3,647 HORRIBLE Forum updateShare Topic Options Subscribe to this discussion  Are you deliberately trying to make the forums so hideous that nobody will use them? The subject text is so tiny, I can barely see it, plus it's virtually impossible to see the difference between read and unread. The subject listings have a huge amount of wasted space between them. You could double the number of on-screen lists (or shorten the scrolling) if you cut it down. There used to be a link on the right that would take me back to the Bookmarks page (what I use as a home page for these forums.) No easy way to get back there that I can see, other than directly from my browser bookmark. At least the text entry seems to properly work with Firefox.   Posted on :‎03-09-2015 05:22 PM    Kudos  0ReplyFollow Options      ResponsesReply     Posted byWelcome_to_Post Member Since: ‎07-02-2003 Posts: 5,381   *sigh*  Happens every.  Single. Time.  They downgrade upgrade the forum software.  Too bad no one listens to us.  Posted on :‎03-09-2015 05:26 PM    Kudos  0Reply Options        Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621   One not-so-wise new "feature" is that when a topic is more than one page long the FIRST post of the topic is now at the TOP of each topic page. If that post is long that is just some extra scrolling to do in order to get through it and to the replies.And if you are at the bottom of the page and scroll back to the top you gotta get past the first long post on your way back up the page. There is no clear demarcation between posts. Posts are no longer numbered. About the only things that are good are that the toolbar features when replying now work with SeaMonkey and Firefox and other browsers AND the default font size seen when composing a reply is big enough to easily see instead of being teeny tiny as it was before. Yippee!!! No more nose prints on the screen when trying to see what I was composing.
    Comcast employees must be authorized to post in the forum in an official capacity. Employees posting here have their names in red and are designated as employees. Names not in red are customers. This is done to protect customers and for assurance that they are dealing with a Comcast employee.
    Non-Authorized Employees are allowed to post but cannot state they are employees nor can they allude to being employees.  Posted on :‎03-09-2015 06:40 PM    Kudos  0ReplyFollow Options        Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621   Do me a favor. Repost this here http://forums.comcast.com/t5/Xfinity-com-Website/NEW-FORUM-DESIGN-Post-Feedback-Here/td-p/2490433 After you do that, I will lock this topic. To anyone else who wants to post feedback do so in the topic I linked to.

  • Suggestions on Posting and Getting Better Answers

    Hello, and Welcome to the Forums!
    In order for this tool to be of maximum service, you should know that this forum is run and maintained by users just like you. No one in these forums is formally employed by MSI. All the Moderators started out just like you coming here looking for help or to gain some knowledge about a particular product. In simpler terms, this is a user to user help forum period. Please treat is as such.
    We ask that you try clicking through the "Service" link found at the top of this page before posting your question.
    Also try taking advantage of the Search option available at the top of every page within the whole forum community.
    Perhaps it already has been answered.
    Please Read through all the "Important" and "Announcement" threads at the top of each forum you visit (These are known as "Stickies") these threads hold a lot of good information pertaining to each forum.
    This will help us all stay focused on the current topics at hand and avoid having to answer the same question over and over again.
    We request when posting a new topic/thread, you provide us with as much information as you can about the particular product and problem encountered. Please provide a brief, but complete history of what was done prior to the problem. It will give everyone a better chance at troubleshooting and minimize the chance of having to ask many questions to get to the root of your Problem.
    If it's a general question that doesn't apply to a specific product, then it is not necessary to include make and model info. Just be advised that the less information you give, the more guesses you will get and your post is likely to be ignored by a majority. So do yourself and everyone else a favor and be detailed.
    Suggestions for the subject line: (EXAMPLE)
    1. Enter the model, then the MSI  Part number (If available) This also helps differentiate at a glance and helps in searches as well.
    Keep in mind that MSI no longer lists products by Part Number, only by marketing name. Anytime you post a part number only and no one recognizes it, it's likely to be ignored. So please try to find the marketing name for your product. We are not privy to internal part numbers any longer.
    2. Then, after the product description, add the problem or question.
    Example: "K7N2G-ILSR MS-6570 Problem with graphics skipping"
    Stay away from weak or lame posts like: "HELP, My computer is broke!"
    Better yet, just keep the word "help" out of the subject entirely, we know why you're here. Exclaiming help is like pressing the elevator button repeatedly in hopes that the elevator will hurry up.
    Please take advantage of the Signature option in your member profile and enter your Hardware, OS and any other info that will benefit users in troubleshooting your problem. Please, Don't leave out Power Supply information! This is the most commonly overlooked component in your system. Please look at the sticker found on the side of the PSU and include the corresponding amperages on the +12v, +5v, & +3.3v lines! If you run into a problem and we think it might be related to a power issue, you will be asked for this information. Save us the hassle of having to ask for it, please!
    You can take my Signature for example or anyone else's. Just remember that you can change it at anytime and add/remove any information as needed.
    Click on the button at the top, select "Forum Profile Information" from the menu on the left under "Modify Profile", then scroll down to the Signature box, and type in your signature there.
    Also a good guide to help get better answers can be found here http://catb.org/~esr/faqs/smart-questions.html It was originally intended for hackers but the basics are covered rather nicely.
    Thank you for your cooperation..

    I have a suggestion!
    why don't you make a sticky for every mainboard type, after all, they each have specific problems!
    or at least the topics should be about every mainboard type, based on the clasification on the msi site!
    so when someone has a problem it would search for it's mainboard topic and have the info, all, in just one place!
    it would be great if every mainboard had it's own forum!
    please take this into consideration! thanks

  • Forum to Post Redwood Queries

    Hi All,
    We are trying to configure Redwood basic version and have got some installation queries. Please let me know which is correct forum to post these questions.
    Best regards,
    Vithal

    Hi Vithal,
    Not sure on what documents you are looking for. Here are the sources for them.
    1) Help document that comes along with Redwood Explorer. This is the best source.
    2) There are couple of Venky's Blogs. One such is
    "https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a4bb2b-0901-0010-b79d-8d4edbe9cf14?prtmode=navigate"
    3) Search for "Redwood", "SAP Central Process Scheduling" ( new name by SAP) on SDN and you will get soem documents.
    4) Ask your Account Manager from SAP and he can help with any additional stuff he may have.
    5) Visit Redwood site. www.redwood.com and you can get some additional material.
    6) Not sure if SAP Educational services in Asia has started offering educational courses (but they are available in North America and Europe). Just check with them.
    7) If someone from your organization is goign to visit TechEd or other SAP events you will probably find a booth on Solution Extensions and can get some mroe material.
    Not sure if there is any best practices document available. You probably want to check that SAP service desk, they might have it. I will check if I have URL for the same.
    The best way to use the tool is to first imagine or draw what you want to do about a process. Kind of process map then create it using the tool. May be using Visio to draw that diagram is good option. The tool is best used when you explorer it with keeping a drawing of what you want to achieve  through the process.
    I will recommend to avail one of the education classes from Redwood. That way you will know the tool much better and also will have additional material at hand.

  • Transferring Data from Lion Beta back to Snow Leopard

    Hey guys so when lion developer preview 4 came out i partitioned my hard drive already running snow leopard and then installed it on the new hard drive. I have been using it since it came out so have accumulated a lot of movies, songs, programs, etc. that are not on my Snow Leopard hard drive. When the final lion comes out I want to update it from the snow leopard one and erase the DP4 hard drive. Is there any way to get all the new info. from the DP4 partition to the Snow Leopard partition? I have tried migration assistant and that says i cant because the other hard drive has a new OS (Lion). So I guess i could wait until i download the final one from the app store but will migration assistant transfer all my new stuff (movies, programs, etc.)?? Thanks in advance.
    - Alex

    Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If your aren't a developer or seed tester then you have an illegal copy.

  • Where is the forum to post questions on Windows 8.1 (table) APPS

    I have a Windows Tablet (HP OMNI) Windows 8. I am using the people app that Microsoft provides. I have linked my account with Facebook. Now when I go to the PEOPLE app in Windows tablet and I click on "Whats new", I should see all the new updates
    from Facebook however I just see only 3 of them. Is there a way for me to see all the notifications from Facebook.
    If it helps, this used to work just fine almost a month back so I m not sure why it is not working now.
    I have tried almost everything - restart, uninstall the PEOPLE and MAIL app and install it back , re-add my facebook account in the PEOPLE APP but nothing helps. I only see 3 notification IN WHATS NEW sections.
    PLEASE HELP
    I am looking for the right forum to post this question. Can you please help ???

    Hi,
    I'd try over here:
    Windows forums on Microsoft Answers
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Http post from an application with file attachment

    Hi ! I didn't know where else to post this message...
    I'm trying to make a HTTP POST from an application and upload a file with it. I have no problems with the posting, just that I haven't got any ideas how to get the file uploaded as well. I've been reading loads of examples regarding the topic, and searching older posts the forum here, without any help.
    Here's the method i'm using:
                   // open connections
                  URL url = new URL ("TheURL");
                   URLConnection urlConn = url.openConnection();
                              // We do input & output, without caching
                   urlConn.setDoInput (true);
                   urlConn.setDoOutput (true);
                   urlConn.setUseCaches (false);
                              // multipart/form-data because we want to upload a file
                     urlConn.setRequestProperty ("Content-Type", "multipart/form-data");
                  // Open output stream
                     DataOutputStream printout = new DataOutputStream (urlConn.getOutputStream ());
                  // Set the actual content
                     String content = "upfile=" + System.getProperty("user.dir") + "\\file.ext&";
                       content += "other_key-value_pairs";
                  // write the data to stream, and flush it.
                     printout.writeBytes (URLEncoder.encode(content));
                   printout.flush ();
                   printout.close ();
                   // Get the response.
                     DataInputStream input = new DataInputStream (urlConn.getInputStream());
                   FileOutputStream fos=new FileOutputStream("postto.txt");
                   String str;
                     BufferedReader bufr = new BufferedReader(new InputStreamReader(input));
                  // Write response to outputfile
                     while (null != ((str = bufr.readLine()))) {
                         if (str.length() >0) {
                         fos.write(str.getBytes());
                         fos.write(new String("\n").getBytes());
                   input.close ();Now, the response here I get from the url i'm posting to is "Failure, no data-file". I've tried many diff methods of writing the file to the stream, but always get the same result.
    I need to file attached like it would be when using a HTML form's <input type="file">.
    Please help ! This is getting really urgent !

    String content = "upfile=" + System.getProperty("user.dir") + "\\file.ext&";
    content += "other_key-value_pairs";
    printout.writeBytes (URLEncoder.encode(content));
    printout.flush ();
    printout.close ();Actually, what this does is create a request like:
    GET /path/to/file/script.language?upfile=/home/user/file.ext&other=params HTTP/1.1
    Content-Type: multipart/form-data
    -- And other HTTP params --
    The file is not actually appended to the request.
    I really don't know how Java handles the file upload, but you could do it by hand, like so:
    public static void doFileUpload(String url, String filename, Hashtable params) throws IOException {
        // Construct the request
        String boundary = "----------------------mUlTiPaRtBoUnDaRy";
        String request_head = "POST " + url + " HTTP/1.0\r\n" +
                                         "Content-type: multipart/form-data; boundary=" + boundary + "\r\n";
        String request_body = boundary + "\r\n\r\nContent-disposition: form-data; name=\"upload\"" +
                                         "\r\n\r\n";
        BufferedReader in = new BufferedReader(new InputStreamReader(new FileInputStream(filename)));
        int b = -1;
        while((b = in.read()) != -1) {
             request_body += (char)b;
        in.close();
        Enumeration keys = params.keys();
        while(keys.hasMoreElements()) {
            String key = keys.nextElement();
            requst_body += "\r\n" + boundary + "\r\n\r\nContent-type: form-data; name=\"key\"\r\n" +
                                    (String)params.get(key);
        request_body += "\r\n" + boundary + "--\r\n";
        int length = request_head.length() + request_body.length() + "Content-length: \r\n";
        String req_length = "Content-length: " + (length + new String("" + length).length()) + "\r\n";
        Socket socket = new Socket(url,80);
        PrintStream stream = socket.getOutputStream();
        stream.print(request_head + req_length + req_body);
        // And now an option to read the response, I will omit that...   
    }Note: I have not tested this code, just wrote it up out of memory. If it does not work, it will propably need some small fixes.
    Tuomas Rinta

  • Reverse CO document post from CAT7

    Hi all,
    How to do a reversal for CO document which post from CAT7 (time sheet)?
    Thanks

    If I reverse the document through KB24N, it will prompt error message:-
    "You want to reverse a CO document which has an external reference. You cannot reverse the external document within the Controlling component. The reversal must run via the external document number."
    I can change it to warning message, but is there a better way to do this? Can we reverse via the external document dumber?
    Can this function BAPI_ACC_ACT_POSTINGS_REVERSE workable? How to execute it?
    Thanks.

  • Customize GL Posting from Logistic

    Hi everyone,
    today, i have one problem related to GL Posting from Logistic.
    As anyone know, all posting like A/R Invoice, Incomming Payment and so on, each time we click add then it will post to GL
    automatically by taking account code from GL Determination and the amount is from the specific column of A/R Invoice as the standard.
    but now, i customize more column in matrix of the system form and i expect to post its amount into GL with seperately account and this accound also not define in G/L Determination too.
    so as the question is, could we handle and customize the event of GL Posting from standard form to GL, like A/R Invoice and so on?
    I'm really hope, anyone know and help me.
    Thanks, Vorlerk.

    Hi Vorlerk,
    If i understand your question correct, that you need to change the automatic JE posting. If it is yes, then my answer is No .
    You can't change the system JE posting, instead you can post an extra JE for your needs through SDK.
    Regards,
    Bala
    Hi Bala,
    Your understanding is correct. And it's more better if i could have some sample of how to post extra JE with A/R Invoice. cannot i?
    Thanks & Regards,
    Vorlerk

  • Posting From IE11 in Windows 8.1

    I've put up a couple of test systems on the Windows 8.1 Preview, both Pro and Enterprise editions.
    Just testing to see how the forum interacts with Internet Explorer 11.  So far so good - I have been able to log in and see things looking pretty much right.
    Something I'm curious about is whether &quot;quoted&quot; strings are handled properly, because we have seen the double quote character changed to what looks like an HTML escape sequence by the forum software when IE10 under Windows 8 is used to access the forum.
    So here goes.
    &quot;Quoted text&quot;
    If the above comes out with double-quote characters at the ends, that will be happy news.
    Also, in typing this, I noticed that the forum software thinks I'm leaving the page every time I press a control - e.g., the Bold, &quot;Insert Image&quot;, or font size controls, and puts this up:
    -Noel

    Here I am, posting from a copy of Windows 8.1 RTM, available to the public for more than a week now, using the released version of IE11...
    The &quot;quoted text&quot; problem is still with us (noting the quotes on this line have been changed to HTMLese.
    The are you sure you want to navigate away from this page?  problem I reported above so long ago is still with us...
    And now we have a new problem.  The following pops up, after which you lose your post (I've had to type this twice).
    It's apalling to see how poorly Adobe is keeping up with technology.  How the hell do you folks expect to be considered the best source for content creation tools with this kind of web site management?
    Do you think no one notices?
    -Noel

  • Which specific forum to post my question?

    Hey Everyone,
    I am trying to determine the correct forum to post my issue in. I have been noticing some class-loader issues recently in our log files under JDK 1.5, and I wanted to post my errors and start a deeper conversation if there were any solutions that exist.
    Can anyone point me to the right forum to post my issue to?
    Thanks in advance!
    --Asif Ahmad                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    A4orce84 wrote:
    Well I assumed Java Programming was a forum dedicated to Java programming related questions (What are Arrays, etc.)That's what it's mostly about, but since your question doesn't fit in any other API-specific forum, that's your best bet.
    This is a fairly complex question dealing with class-loaders, dead-locking in systems, etc.Class loading and dead-locks are pretty much related to the language.

  • Posting from iOS

    Those frustrated by the hassles of posting from iOS will be pleased by a recent change.  I don't know where the change was, but the third-party iOS browsers I'm using (Atomic and iCab Mobile) no longer put double capitals at the beginning of a paragraph.  Previously, I'd see stuff like "THis is crazy."  Which, being a bit of an OCD perfectionist when it comes to spelling and grammar, drives me absolutely nuts!
    Of course, little quirks remain.  In iCab right now, I'm typing with no visible insertion point.  Yet it will probably be visible and flashing in the middle of some non-editable text after I post this.  But at least I can access the message editing toolbar and the Edit button!    (Oh, hey, look, there's the insertion point...  Guess inserting a smiley fixed it.  )
    Atomic seems to have lost the ability to access the toolbar in the message editor, though I haven't tested the advanced editor there yet.
    Safari, of course, is the most attractive and pleasant browser to use on iOS, in my opinion, but is quite badly broken when it comes to posting on these forums.  So I'm finding myself coping with the quirks of iCab for these forums at this point, while until just recently they were simply too much for me and I put up with the forum quirks in Safari instead.
    Anybody else have any good tips on editing posts here using iOS?

    STill does the double-cap for me (iCab). It's also slow.
    ANd to think, all of this because Apple won't listen to its own advice to feed standard, full web pages to iPads, rather than the mobile-optimized ones...

  • Posting from WinXP64, the definitive thread

    Greetings.
    Posting from Windows XP 64 bits here.
    It's kind a useless at the moment. I have no sound, my printer doesn't have any drivers, HP DeskJ. 5550 and ATi doesn't have OpenGL support in the drivers that ship with the XP64 install. Direct X is almost as fast tho as Winxp 32bit.
    Any one feel that the Explorer is MUCH MUCH more smoother and more responsive and the system barely touches the hard drives in browsing mode?
    Everything is just super responsive and the boot time is shorter too.
    Regards,
    Simon

    ...YAY...thanks Bas...got sound...here...
    ...tip...download and unzip in a Windows 32-bit OS...XP 64-Bit doesn't recognize zip and has no right-click option to extract...might just be me   ...
    ...getting a few pop-behind ads...???...
    ...I visit a forum that uses Flash and the Macromedia install notice showed up everytime I went to a new page until I checked the "Alway Trust Macromedia" box and clicked Install...heh heh...
    ...Paint Shop Pro 8 locked up once but Task Manager got me out of it...
    ...one odd thing...when I start up Windows loads and I get the desktop but then My Computer opens to the F-drive Program Files (XP 64-Bit) page...???...everytime...
    ...'nuff said...  

  • Need to find records posted from Fiori launchpad or Fiori application

    Hi,
    We have implemented Fiori Applications at our customer site now they want to identify or find out records posted from fiori launchpad and SAP ERP.
    Purpose of this activity to monitor the utilization of Fiori Application. Is anyone know how we can achieve this?
    Regards
    Shraddha

    Hi Sharddha,
    Please look at http://scn.sap.com/thread/3621724 and  http://scn.sap.com/thread/3336896
    It is better solution.
    Regards, Masa
    SAP Customer Experience Group - CEG

Maybe you are looking for