Forum editing and searching problems

How long time do I have for editing my topic ?
How can I search inside my discussion topics ?

You have 15 mins to make changes to a post you've made.
To search your posts enter a search term in the search box when that returns the display will have two additional boxes, one to limit the each to a particular comunity and another to limit the search to a partiular user. Enter your name in this box and re-search.
BTW questions concerning the list itself are best asked in the Using Apple Support Communities section
regards

Similar Messages

Post editing and search forum thread?

If a post is edited, shouldn't the forum thread be bumped to the top?
Is it possible to search inside a forum thread? If not, a feature like that would make it easier to find what you're looking for.

jonkristian wrote:If a post is edited, shouldn't the forum thread be bumped to the top?
Well I think that function is more for correcting typo's, so bumping the thread to the top would be kind of undesirable. Anything other than correcting a typo, then you could probably just post again in the thread.

ReportViewer 2014 PDF rendering and search problems (glyphs / rectangles when text copied to MS Word)

I'm using ReportViewer from MSSQL 2014 express in my experiment, use RDLC /local reports/.
I use slovak char-set (šťďňľřôä) - international chars.
When rendering to PDF I use HumanReadable PDF + Use font sub-set embedding.
The report is viewed on the same server as it is generated.
The generaed PDF prints correctly,
but some words cannot be found inside PDF /with ctrl+f/ and
when I copy paste the content to MS Word, those words (it§s chars) that cannot be found are replaced by
rectangles.
Any clue why it this so and how to avoid this issue?
Is there a difference between rendering reports locally /via MSSQL report viewer/ or on the server?
Thanx.

Adobe Professional 8.1.2 - similar problem. Word converted to PDF. Three paragraphs separated by a single space line break. When paragraphs are copied (either with or without line formatting) the lines do not appear between the paragraphs in the pasted material (in Outlook or Word). Only way I can find to make them appear is to make each paragraph a numbered list. Then it works. What is going on? I have tried different formatting options in Word.

Query Based Taxonomy and Searching Problem!

Hi all,
Ive an urgent problem to solve ....
I create some customs properties with dependent values, for example, if I put Country: Germany, I ve three options, (Waldorf,Munchen,Berlin) and so on ...
Then, I create a Query Based Taxonomy, where in some categories Ive a query, with the dependent value (Ex: Waldorf) ... I mean, If City = Waldorf, the document belongs to this category.
So, when I do this, the taxonomy fails ... Only with the dependent value, I mean, if the category is with the base property (Ex, Country) it works.
Plese, help!
Cheers,
Andres.

Hi,
To include a dependant property in a query, you have to enter both parent (Country = Germany) and the dependant (City = Munich) properties in the category.
Hope this help
Kind regards
Vincent

Business Edition and memory problems on Windows 7

Does anyone have problems when loading the directories to memory for faster processing? I have a Windows 7 64-bit machine with 8gig of ram. Even after a restart I have problems with this. I get an error code of "7050, DPV ERROR, Insufficient memory to cache DPV directories."

Jeff,
We have been able to recreate the issue but the funny thing is, not on every Windows 7 machine. We also found that if you run the program as admin, even if you are already the admin on the machine that resolves the caching issue. To do this you can right click on the icon for the software, left click on properties, click on the compatibility tab, then check always run as administrator. Click ok, then open the program.
We also found that you can run in XP compatibility mode and that also corrects the caching issue however I would recommend running as admin because that can also resolve issues with the Auto Update feature.
Just from poking around on the internet about the running as admin feature, it appears this is pretty common with Windows 7 and 32 bit programs. Our development team is still researching to see if it is a Windows 7 issue or program issue, and why we can recreate it on some machines but not all, and why the difference just between April and May dirs.
I'll update the thread if I find out anything more but right now I would try the always run as admin with the May dirs or June dirs once they are released.
Thanks,
Kendra

Adobe not allowing edits and seems to continue searching for server

Currently running Adobe 10 on a PC and working with a document that is in collaboration with 2 other authors.
The issue I am currently having is that I wish to be able to open the Document, make the necessary edits (and or comments) then save the document. In trying this, in the upper right hand side of the toolbar, the green circle continues to spin and trying to access the server, nor am I able to make the changes to edit and/or save the document. Really feel in ruling out a server issue since it has been behaving this way for 2 weeks. It also keeps prompting me to sign into the document (which I have selected the option to stay "signed-in" and password is correct).
Is there a fix for this or what steps in troubleshooting should I try going forward.

From what you wrote it seems that you are trying to perform a shared review on a PDF rather than having an issue that is exclusive to Adobe Reader / PDF on the local machine.
You may find it useful to browse the Services @ Acrobat.com Forums at:
http://forums.adobe.com/community/acrobatdotcom
(particularly if you are using acrobat.com)
If WebDAV or a network server is involved you'd want to discuss the problem with whomever provides support for either.
Be well...

Editing tools and search option stopped working after IOS Update

Hi All,
Since the last IOS & Adobe Reader Update I have been unable to edit or search within existing PDF using the Adobe Reader iPad App. I have noticed the document now shows as protected on the Iphone Adobe Reader App but does not give me any option to unprotect it. Please bear in mind I have been editing this document for over 6 months now and the document shows my previous annotations.
Any ideas on how to resolve this issue?
Many thanks
S

Hi Sue,
Yes, we received your PDF document via email. Thank you!
I can confirm the following:
Your PDF document is not encrypted or locked by password.
This is a defect in Adobe Reader for iOS version 11.6.4 (or possibly all 11.6.x versions) for the particular type of PDF documents like yours. (The problem does not happen with all PDF documents.) The tools/areas that are affected by the defect: Search, text selection, text markup annotations (highlight, strikeout, and underline). However, you can still add other types of annotations, namely sticky notes, free text, and freehand drawing, to the PDF document.
The defect has already been fixed in our internal build for a future release. (I was able to add highlight/strikeout/underline and search text in your PDF document.) Unfortunately, I am not able to speculate on the next release date.
Sorry for the inconvenience. We hope that you switch back to Adobe Reader for iOS once the defect is fixed.
Thank you for reporting the problem!

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
If you must go to an image format, try PNG.

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

Problem with alv edit and save

hi all,
       can anyone find me a solution for alv edit and save...the issue is that i will be editing and just clicking on save button withot any row selction and the data changed should be updated in database.
                                                                                sunil.

Hi Bhaskar,
To make fields editable in ALV, while creating the field catalog for ALV, use:-
wa_field-edit = 'X'. " to make a field editable
To check the data changed in ALV, use code:-
ALV GRID Display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program                = sy_repid " report id
    i_callback_user_command           = 'USER_COMMAND' " to handle user command
    it_fieldcat                       = it_field " for field catalog
    it_sort                           = it_sort " for sort records info
TABLES
    t_outtab                          = it_final "internal table with records
EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Sub-routine USER_COMMAND
FORM user_command USING v_okcode LIKE sy-ucomm selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
v_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE v_okcode.
* when the function code is EXECUTE then process the selected records
    WHEN 'EXECUTE'.
*to reflect the data changed into internal table
      DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
* refresh the ALV Grid output from internal table
      selfield-refresh = c_check.
ENDCASE.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the

Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the work. I thank you.

Renew the subscription?

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do?

Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?

Search, Edit and Save functionality

Hello,
We are looking for following functionality. Not sure if this is possible in ocs but other document management products has this functionality.
We want to search for files using the search screen in UI. We want ato allow users to open the document from search results, edit and save it then and there.
Is this possible? If not what is the user process for doing this currently?
please help.

please help

My final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

What version of FCP X are you using?
What is the full spec of your Mac?
What codec (file format) of video are you working with.
Andy

Problems with Oracle Database 10g Express Edition and JBoss

Hi all,
I try to use Oracle Database 10g Express Edition and JBoss, but sometimes i have a connection problems.
Sometimes i have starnge warning:
WARN [JBossManagedConnectionPool] Unable to fill pool
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
and:
org.jboss.util.NestedSQLException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
Oracle Database 10g Express Edition support Distributed Transaction Processing (DTP) XA interface or not?
Some ideas?
Thanks in advance!
Stoyan

Hi,
yes, it will work, but only with the Western European Edition, not the Unicode release.
See this thread for details:
Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
Regards,
~Dietmar.

Forum editing and searching problems

Similar Messages

Maybe you are looking for