[Forum FAQ]Solution for Windows PowerShell console font issue when changing system locale
Issue description
After changing Windows System Locale to another country, users cannot modify Windows PowerShell console font to Lucida after modifying the font settings. There is also a potential bug report in Microsoft connect:
https://connect.microsoft.com/PowerShell/feedback/details/806286/powershell-4-console-font-issue
Reason
In most situations, this problem is caused by system locale is changed to other countries from United States, such as Chinese, French, etc. Because of this change, the code page and font of Windows PowerShell console might be changed with system locale.
For Example, if change system locale to Chinese (Simplified China), Windows PowerShell console
(%systemdrive%\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools) properties would be changed like this:
Solution
To resolve this problem, please follow the steps below:
Access to the path below to find the shortcut of Windows PowerShell:
%systemdrive%\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools.
Right click Windows PowerShell and choose Properties.
Switch to Options, check if Current code page list there, if that it is, choose
437 (OEM-United States) and click Apply. Maybe you will encounter an
Access Deniedpop-up as the following picture. Then you need take ownership of current PowerShell File, switch to
Security Tab and obtain full control permission for current User Account.
Note: if Current code page was not list there, just leave alone
Options settings and switch to Font Tab.
Switch to Font Tab, choose the font you wished to use, click
Apply.
After the above settings, current Windows PowerShell console font should works as you wished.
Applies to
Windows PowerShell 3.0
Windows PowerShell 4.0
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.
Cause
This issue is due to the bootmgr file, we cannot use the bootmgr file of Windows 7 to find the Windows 8 Operating System files.
The Windows 7 bootmgr can indeed boot Windows 8.
This is on a BIOS system
https://www.youtube.com/watch?v=AVO5aeaKeeE
This is on a UEFI system
https://www.youtube.com/watch?v=g3-K6Fyobz0
The Windows 8 bootmgr partially loads Windows 8 before offering the boot menu. By choosing Windows 7, the system must do a reboot. Using the Windows 7 bootmgr, no reboot is required.
"Let them that don't want it have memories of not gettin' any." "Gratitude is riches and complaint is poverty and the worst I ever had was wonderful." Brother Dave Gardner. "Experience is what you get when you're looking for something
else." Sir Thomas Robert Deware
Similar Messages
-
Hi,
I was following the artigle (http://www.messageops.com/resources/office-365-documentation/ad-fs-with-office-365-step-by-step-guide/) but
when try to install the 'Office 365 PowerShell Module' shows a msg saying that 'windows azure active directory module for windows powershell is not supported by your version'.
And according to the blog (http://blogs.office.com/2014/04/15/synchronizing-your-directory-with-office-365-is-easy/) "DirSync can be
installed on an existing domain controller"
>>>> Any help is appreciated.
* Similar issue: http://www.adaxes.com/forum/post7398.htmlOk Vasil tks for reply, but this server is 64x. I dont get the point.
Microsoft Windows [Version 6.0.6002]
C:\Users\Administrator>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CLIENTNAME=ANJOTEC_NOTE01
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=COMPANYBR-SERVER
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
lib=C:\Program Files\SQLXML 4.0\bin\
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\COMPANYBR-SERVER
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\ProgramData\Oracle\Java\javapath;C:\Program Files\HP\NCU;C:\Windows\sys
em32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\
1.0\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program File
(x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Serve
\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program F
les (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQ
Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Vis
al Studio 8\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\ExchangeMapi\
C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x
6)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Rox
o Shared\9.0\DLLShared\;C:\Program Files\Microsoft\Exchange Server\bin;C:\Progr
m Files\Microsoft\Exchange Server\Scripts
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1e05
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\9.0\Roxio Central
3\
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Administrator\AppData\Local\Temp\2
TMP=C:\Users\Administrator\AppData\Local\Temp\2
USERDNSDOMAIN=COMPANYBR.LOCAL
USERDOMAIN=COMPANYBR
USERNAME=administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
C:\Users\Administrator> -
Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.Consider MS System Center 2012.
Rgds -
Jabber for windows 9.7 photo issue
Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot! -
When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library -
Introduction
The Connector software for the Windows Server Essentials OS connects the computers in your network to the Windows Server Essentials server. When you connect computers to the server via Connector
software, it will help you to automatically back up the computers and monitor their health. Meanwhile, you will be able to configure and remotely administer the Windows Server Essentials server. The Connector software is installed when you connect a client
computer to the server. You can start by typing http://<your_server_name>/connect
Example: Windows 8.1 connects to Windows Server 2012 R2 Essentials
1. Open the Dashboard on Windows Server 2012 Essentials, navigate to USERS tab. Right click and select Add a user account (Figure 1). Then follow the Add a User Account wizard to configure
and add the user account (Figure 2).
Figure 1: Add a user account -1
Figure 2: Add a user account -2
2. Logon the client computer, type the http://<your_server_name>/connect in IE. Then you will see the download page for Connector software (Figure 3).
Figure 3：Download the
Connector software
3. Click Download software for Windows and download the Connect software (ComputerConnector), then run it.
After restart automatically, please follow the Windows Server Essentials Connector Configuration Wizard (Figure 4 – Figure 7).
Figure 4: Windows Server Essentials Connector Configuration Wizard -1
Figure 5: Windows Server Essentials Connector Configuration Wizard -2
Figure 6: Windows Server Essentials Connector Configuration Wizard -3
Figure 7: Windows Server Essentials Connector Configuration Wizard -4
4. When complete the configuration wizard and logon the client computer, you will be able to use the Launchpad (Figure 8).
Figure 8: Launchpad
5. Meanwhile, when you open Dashboard, will be able to find that the Windows 8.1 is listed under DEVICES. It will help administrators to manage the client computer (Figure 9).
Figure 9: Clients listed in the Devices panel
For Windows XP
You can type http://<your_server_name>/connect in IE. Then the download page will appear (Figure 10).
Figure 10: Download page
However, it will encounter the error: “xxx.exe is not a valid Win32 application” (Figure 11).
Figure 11: Error message on Windows XP
Windows XP is not a supported OS for client computer. For more details, please refer to
Get Connected in Windows Server Essentials.
In addition, please note:
Microsoft ended support for Windows XP on April 8, 2014. This change has affected your software updates and security options.Checklist for the configuration issues
First of all, when we want to connect the client computers to Windows Server Essentials, please check if the date and time settings for the client computer is consistent with the server.
Meanwhile, please also check the Regional and Language settings.
Issue 1: Installation did not succeed
When accept the license terms to continue in the configuration wizard, you may encounter the error (Figure 12).
Installation did not succeed
Windows Server Essentials Connector has not been installed because:
Cannot download the package.
Verify that your device is connected to the Internet, and then install the Windows Server Essentials Connector.
Figure 12: Installation did not succeed
Checklist:
1. Verify the DNS client settings.
2. Check the communication between DNS server and the client.
3. Check if you can ping server via IP address and server name successfully
Issue 2: Cannot connect this computer to the network (Network related)
This computer is already connected to another Windows Server network. Before connecting this computer to the Windows Server Essentials network, you must remove this computer from the
current network.
To resolve this issue, contact the person responsible for your network.
Figure 13: Cannot connect this computer to the network (Network related)
Checklist:
1. Check if the client computer is a member of another server network.
2. Change the client computer to Workgroup via administrator. Then check if you can connect it to the new Windows Server Essentials network.
Issue 3:
Cannot connect this computer to the network (Account related)
The computer cannot be connected to the server using the user name and password credentials provided. This may be because an existing computer account having name “ComputerName” was previously
created using a different set of credentials. Rename this computer and then try to connect this computer to the server again, or contact your administrator to remove any old conflicting account.
When you connect the client computer to server essentials with a new user account, please check if the client computer has been connected to the server essentials, and didn’t remove from
Dashboard. You may encounter the following error.
Figure 14: Cannot connect this computer to the network (Account related)
Checklist:
1. Check if the client computer has been connected to the server essentials, and didn’t remove from Dashboard.
2. Remove the client computer from the Dashboard, then try again.
Additional resource:
Troubleshoot connecting computers to the server in Windows Server Essentials
Windows 2012 Server Essentials ConnectComputer
Troubleshooting -
Possible solution for Windows printing - Incorrect permissions
We have an Epson CX6400 all-in-one printer attached via USB to a Mac.
The printer works fine after having to reinstall most of the print subsystem and drivers when upgrading from OS X 10.3 to 10.4.
We also have some Windows XP and Linux computers.
I'm using Bonjour for Windows XP to print, and prior to 10.3.9, it was working correctly. After subsequent upgrades, printing from OS X would work fine, but not from Windows.
Bonjour configures IPP printing using a generic Postcript driver that in term Mac OS X processes locally using the actual printer driver.
When printing from Windows, the printer queue would stop and I would have to manually delete the print job and restart the queue, before I could print anything.
Trying to figure it out, I checked /var/log/cups/error.log, and I'd invariably see the following when trying to print from Windows XP:
I [31/Jan/2006:22:49:56 -0500] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 15403) for job 119.
I [31/Jan/2006:22:49:56 -0500] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 15404) for job 119.
E [31/Jan/2006:22:49:56 -0500] PID 15403 stopped with status 1!
when running /usr/libexec/cups/filter/pstopdffilter manually from the console with what I thought would be the proper command (from the terminal, as root), it didn't die on me, and would rather show me debug information about the fonts being used on the intended document.
Solution:
(Note: I don't work for Apple and this can potentially create security issues, but it works as intended otherwise).
Using the console, go to /usr/libexec/cups/filter, as follows ($ is the prompt, type AFTER the prompt):
$ cd /usr/libexec/cups/filter
$ sudo chmod +s pstopdffilter
Sudo will ask for your password to temporarily gain root access.
This executable (pstopdffilter) is owned by root, so the command "chmod +s" makes the process running this command to run as root instead of whatever user process invokes it.
It shouldn't have to be run as root. Possibly the file/directory where it needs to write to has incorrect permissions.
Again, running these processes as root is not a good idea, and a malformed PS file might make it crash and possibly exploit something else. It's unlikely that this will happen, but just be warned.
E.
PowerBook G4 Mac OS X (10.4.4)Thomas
Wow - thanks for such a comprehensive post.
I have Aperture and a 2400 so this information is exceptionally useful to me.
Again - thanks for caring and sharing
Brian -
I am fresher to Microsoft technet, and also for Windows Powershell Scripting
Hi All
i am started Learning Windows Powershell Scripting, kindly suggest me which are the refernce documents i need to refer.
i need to learn very strong basics.
thanks in advance.
Changalaraya reddyHello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Windows PowerShell forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Hi,
I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
error. No other errors were there other than that.
Error
Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
method suitable for an entry point.
C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC Blog_Reader
But I found the solution while I fixing it.
Solution for that is like below.
Go to your App.Xaml and Right-Click thenGo to Properties
Check whether the Build Action is
ApplicationDefinition
If not change it to ApplicationDefinition.
Clean the code (solution) and Deploy
Now the error is fiexed.Hi Robana,
Good sharing on the Technet.
This will definitely benefit other who may encounter the same issue as yours.
Thanks for your sharing again.
Kate Li
TechNet Community Support -
Scan to PDF files too large! - Why?? Solution for Windows - How about Mac? (HP-8630)
Scanning a document to a PDF file of reasonable size has been addressed many times - it is always an issue! My wife is a realtor and frequently needs to scan multiple page documents. I found an actual solution last night:
27 page letter-size B&W document - Scan to PDF on my HP-8630 AIO using HP software at 300dpi, small file size, BW: 27MB! Too big to email.
Solution (in Windows 7 at least), if you have Adobe Acrobat:
Open Adobe Acrobat, go to File Menu - Create - PDF from Scanner - Configure Presets. Select and configure "Black and White Document":
Select TWAIN device (NOT WIA) as the scanner; black and white, 300dpi, file size one notch to left (smaller) from center, check "optimize after scan". Select paper size and one- or two-sided scanning. Uncheck "make searchable". Save the preset. (The TWAIN driver was apparently installed with the HP installer, since I did not have to look for it.)
After placing pages in the Doc Feeder, go to File Menu, Create - PDF from Scanner - Black and White Document. Watch the magic!
File size 768k! Quality indistinguishable from the 27MB version, sharp and clear, all 27 pages! Really!
Using the HP software, using a lower resolution or sliding the file size slider to smaller makes a muddy scan, and the file is still huge compared to the Acrobat technique. MUCH worse quality than the Acrobat 768k version.
Interestingly, using Acrobat to open the 27MB scan and "PRINT" it to the PDF Printer reduced the size to 10MB, with no change in appearance. "Save as smaller PDF" did not reduce the size further.
What gives, HP?? What can Acrobat do to scan from your AIO that you can't do?
I tried on my Mac as well - we use both. No go. On Mac OSX 10.10.1 with latest HP drivers, Acrobat does not see any TWAIN or other driver from within the dialog box described above. Scanning from HP software again yields about 1MB per page.
Anyone know how to make Acrobat see the scanner on Mac?Hi @JosephWit ,
I see by your post that you are having issues with the PDF scanning size being too big. I will do my best to assist you with this issue.
The drivers for 10.10 are installed by the Apple Updates. Did you install the 10.9 drivers or are did up run the Apple Updates to install the printer?
Uninstall the 10.9 printer software and run the Apple Updates to install the proper drivers. Then you can scan with the Apple Software.
Connect the printer to the Mac by a USB cable and run the Apple Updates to install the printer drivers.
Go to the Apple, About this Mac, click on the Overview tab and select Software Updates.
Go to the Apple, Printers and Scanners, delete the USB drivers and disconnect the USB cable.
Then add the wireless printer as a Bonjour printer if the printer is networked.
Click on the + sign, highlight the printer, below beside Use: make sure just the printer name is listed. (you might have to click on the drop down to select your printer from the list)
Here is a document for Scanning in OS X v10.10 Yosemite Without HP Software.
If you are having issues with Adobe, run the updates. Product updates.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY
Best Regards,
Beau LeoHi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee -
Windows 8.1 is facing a problem while taking System Image Backup on DVD, it pops an error saying 0x80040154 and more it says that class is not registered , i am trying from days to find some optimum solution for it apart from taking it on external
hard drive...any suggestion please let me know asap!
regards!
Hi,
Check this article first:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Please capture the system event during you reproing this issue by using Process monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any Access denied error, follow this blog to solve this issue.
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved log file here for our research. Please upload them to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support -
Kinect for windows sensor does not start when using remote WMI
Scenario:
I have written a software (lets call it kinectRecorder.exe) that uses "kinect for windows sensor" to record images. The machine that connects to the kinect sensor has windows 8.1 and kinect v2 installed. The software is able to successfully records
images from kinect sensor when running locally. (meaning if I hit f5 from vs2013, frames are recorded to local disk)
Due to resource constraint and other requirement, I have to remotely kickoff kinectRecorder.exe on the windows 8.1 machine from a windows 7 machine. on the windows 7 machine, I remotely kick off the kinectRecorder.exe using windows WMI infrastructure.
The credential used for windows 8.1 machine and windows 7 machine are the same under same windows domain. the credential used to authenticate in wmi is also the same, I can see the user name running kinectRecorder.exe after kinectrecorder.exe is started
remotely.
Problem:
The result is that kinectRecorder.exe starts ok, but after the kinectsensor.open call, isavailable property changed to false, meaning sensor not detected.
Question:
What's stopping kinect sensor to be detected/opened (i'm not sure what the correct jargon is here)?
I have been search the web, In msdn documentation (known issues), I cannot find the problem being mentioned. I wonder if I'm the only person who has encountered this issue before.
Any pointer is hugely appreciated.Kinect is not supported within the context of a service because of the underlying need for a user session, see
https://social.msdn.microsoft.com/Forums/en-US/72cecf8b-ac64-47e2-b54b-ddbd1dc237c9/calling-kinect-sdk-apis-from-a-windows-service-is-not-possiblesupported?forum=kinectv2sdk
Can determine that the system has at least one logged in user and can you launch the application within that users session? KinectMontior/KinectService must be running for the runtime to get any data from the sensor. If you use Remote
Desktop to log into that user session, you can confirm this works by running any of the samples and they should work without issue(remember to ensure that your audio remoting is left on the server, see troubleshooting guide
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk).
Carmine Sirignano - MSFT -
Google, Twitter, StumbleUpon, and YouTube are a few site that it effects. Facebook seems to be the only thing not effected but Google is in this annoying type and what seems like everything else is too. I went to the preferences and checked with one of my friends preferences but they are both the same.
You can do a check for corrupted fonts and other font issues:
* http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html - CreativeTechs Tips: Garbled Fonts Troubleshooting Guide
* http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts -
Solution for Ovi Suite 3 connectivity issue on Win...
I tried searching web for solutions but in vain, so I found it in a way I never anticipated for Nokia software though I used it many times for other software)))
After much pain, there's a simple solution for those using at least Windows 7 (as I do).
After installing Ovi Suite, do not run it out of installer, but just finish it.
Right-click on Ovi Suite, choose Properties (bottom line), in the window that appeared chose Compatibility tab, there select Run this program in compatibility mode - Windows Xp Service Pack 2.
Then OK or Apply - anyhow, after applying these settings, launch Ovi Suite, choose Use bluetooth instead (my problem was that the 'installing bluetooth modem stage' was looong and resulted in failure and, thus, impossibility to connect. Even through 'shamanism' syncing didn't work).
REMARK! On Serching for bluetooth devices you may need to do Search again so that after selecting your phone, Next button became active -> then as by the book)
Now works.
Nokia programmers don't know how to handle Windows 7 API properly???[SOLVED]
My Solution:
1) Backup contacts using PC Suite.
2) Update firmware to v410 using PC Suite. Install my phone E66
2) Uninstall K lite codec pack n remove all related registry.
3) Import contacts back to my phone E66. Uninstall PC Suite and all nokia related drivers, registry n folders from computer. Phone driver also uninstall.
4) Reboot. Install OVI Suite 2.1.1.1. Install E66
5) Download n install K lite codec Full version 5.6.0. Set ffd show filter to open as many media files as possible. Set ffd show filter to open base on whitelist. Set ovi suite and nokiamserver.exe into ffd show filter blacklist.
This solved my problem 2 above. Hopefully its not a temporary fixed.
6) In OVI suite select auto sync off for everything. Connect E66 to phone, wait for 10 to 15 mins. Backup function should work. Backup phone.
With this problem 1 above is solved.
Last but not least, use task manager to kill nokiamserver.exe process manually. After ovi suite is exited. Hopefully, nokia will set ovi suite to kill the process when ovi suite exits in the near future.
7) Now you can add applications, configure your phone with your operator settings.
Cheers.
Maybe you are looking for
-
A305-s6905 cd drive not working---DVD works fine though
My computer has a cd/dvd drive that works for dvd use but not for cd. All looks ok in device manager. DVD ROM shows up in My Computer. Any suggestions? Thanks.
-
I am trying to set up a Mail account for a second user. I have made the user account but when I try to set up Mail, it fails as if the password or e-mail is incorrect but I know it is correct. When I try to go to Mail preferences, it is grayed out.
-
Hello, Please help me, I´m doing a query over a database table and it gave me the next exception: java.sql.SQLException: [POL-5130] table or view not found Excepción Interna: java.sql.SQLException: [POL-5130] table or view not found Código de Error:
-
How can I copy and paste precisely?
My little "copy and paste" camera in Adobe Acrobat used to work perfectly. It would copy precisely the text or the image I wanted to copy. However, lately it wants to grab a little more or a little less text than I want. If I want to highlight a p
-
Whenever I try to update my Ipod the ITunes does not recognise my Ipod & refuses to communicate with it. I have managed to solve them problem before by restoring the Ipod to its factory settings & re-registering the IPod to the account, but this take