Forum for Data Services, RapidMarts, Data Quality

SAP BO Moderators,
Could you educate me if there is any forum for BO Data Services, Rapid Marts and Data Quality.
If not, could you tell when will this forum going to start?
Thank you.
- Anil

Anil
you can post your questions at the below forum for Enterprise Information Management
Data Services and Data Quality
regards,
Shiva

Similar Messages

CIM XML Examples for Importing Service Item Data

Use these simple XMLs to edit and create your CIM file to import SI Data...
The Lifecycle Center guide provides all the instructions on how to create the CIM XML for importing Service Item data - the attached examples can be used as a starting point for you to use.
The "Host Policies" example provides the format for a single service item
The "System Policies Approvals" example provides the format for multiple service items
Note the image below taken from the LCC guide to capture the correct data type that must be used in defining each SI attribute in the XML.

maybe I'm being a bit slow on the uptake, but I've tried and tried and none of my XML files will import, they always stop at 'Class Not Recognised'.
I had originally assumed the class was the SI type - does anyone have any information about this?
Thanks, meghan

Data Services vs Data Insight

Hello SDN Members,
I'm having difficulties understanding the differences between "Data Services" and "Data Insight".
I google it but still want to see more response about them to propose for a POC kind of work.
Read guides about both not completely satisfied.
Sam

Sam
With Data Services - you can install Data Quality and Data Integrator (they are merged within the Data Services installation - provided you have the correct keys.).
Data Insight is a seperate installation that is basically a full blown profiling tool that also works with Data Quality. The coolest thing about Data Insight are the reports you can build on top of Data Quality - namely a Truth Query. the truth query uses components of Data Quality (Mainly the Address Engine and Address dictionaries) to give you an accurate profile or 'truth' about you addresses. It can give you the number of good addresses, bad addresses, fixable addresses with Data quality, and unfixable addresses with data quality. It can also determine potential duplicate addresses as well. these statistics are EXTREMELY helpful when doing a data migration or if you merely want to cleanse your data.
If you do not have Data Insight, but you do have data quality - you can do a basic dataflow to cleanse addresses in DQ and then run the Data Quality reports within the Management console in Data Services.
I'm Back

Delete or refresh data service in Data/Services panel.

Hi,
I can´t delete or refresh data service in Data/Services panel.
Help!!

Hi Sujit ,
Thank you very very much for you post "Building Flex application for BlazeDS Remoting destinations using Flash Builder 4".
I didn´t have any problem when i changed the .fml, only themes change. I didn´t have any message when i couldn´t delete/refresh de services.

Flex data services and data managment.

Hi!
I have a question about data services with data managment enabled in Adobe Flex Builder 4. The issue is more theoretical than practical.
When I need to remove an item from the DataProvider I use the delete method of autogenerated service, but when I need to add or update item in DataProvider, I use methods of DataProvider ArrayCollection directly (addItem ...). When I try to remove item from the DataProvider with removeAt method, no changes made to database after commit. Why and how this stuff works?
P.S. Sorry for my bad English, I use Google transltate.

Thanks for the reply. Yes, I did compile all the Java and it
works OK with a simple Java program. It just will not work in a
Flex application.
The java classes are:
RRA:
package blah.myPackage;
import java.util.List;
import java.util.Collection;
import flex.data.DataSyncException;
import flex.data.assemblers.AbstractAssembler;
class RRA extends AbstractAssembler
public Collection fill( List fillParameters )
RRS service = new RRS();
return service.getSome();
RRS:
package blah.myPackage;
import java.util.ArrayList;
import java.util.List;
import java.sql.*;
import flex.EORS.*;
class RRS
public List getSome()
ArrayList list = new ArrayList();
String str = "bob";
RR rr = new RR(str);
list.add(rr);
return list;
RR:
package blah.myPackage;
class RR
private String name;
public RR() { }
public RR(String name)
this.name = name;
public String getName()
return this.name;
public void setName(String name)
this.name = name;
I started with something that retrieved data from a database
but watered it down just to try and get some kind of communication
between Flex and Java.

Delete data service in Data/Services panel

Hi,
I can´t delete or refresh data service in Data/Services panel.
Help!!

Buenas,
Borré el contenido del fichero fml que está dentro de la carpeta .model de la aplicación y lo reemplace por uno sin configurar un data/service.
<?xml version="1.0" encoding="UTF-8"?>
<model xmlns="http://ns.adobe.com/Fiber/1.0">
<annotation name="ActionScriptGeneration">
<item name="FullyQualifyReferences">true</item>
</annotation>
</model>

HT4623 Could not activate cellular data network. You are not subscribed to a cellular data service" "Cellular Data Plan Usage-There is no data remaining on your current plan. Would you like to add more data now?"what is the best thing i can do with this p

Could not activate cellular data network. You are not subscribed to a cellular data service"
"Cellular Data Plan Usage…There is no data remaining on your current plan. Would you like to add more data now?"what im going to do whit this problem??

I have done that and it is definitely on. My husband has the exact same phone and I upgraded his IOS at the same time, but this problem is not happening to his phone (we are also on the same plan, so our service should be the same). Our settings appear to be identical and my phone is showing the 3G symbol at the top, so I can't understand why it won't access the network.
I've turned it on and off twice and have reset all settings with my iTunes account, but it still isn't working.
I'm not a complete idiot with this sort of stuff - I have tried all the obvious things.

Data Services and Data Quality Recommnded Install process

Hi Experts,
I have a few questions. We have some groups that have requested Data Quality be implemented along with another request for Data Services to be implemented. I've seen the requested for Data Services to be installed on the desktop, but from what I've read, it appears to be best to install this on the server side to allow for more of a central benefit to all.
My questions are:
1. Can Data Services (Server) install X.1 3.2 be installed on the same server as X.I 3.1 SP3 Enterprise?
2. Is the Data Services (CLIENT) Version dependent on if the Data Services (Server) install is completed? Basically can the u201CData Services Designeru201D be used without the Server install?
3. Do we require a new License key for this or can I use the Enterprise Server license key?
4. At this time we are not using this to move data in and out of SAP, just using this to read data that is coming from SAP.
From what I read, DATA Services comes with the SAP BusinessObjects Data Integrator or SAP BusinessObjects Data Quality Management solutions. Right now it's seems we dont have a need for the SAP Connection supplement, but definetly something we would implement in the near future. What would be the recommended architecture? A new Server with tomcat and cmc (seperate from our current BOBJ Enterprise servers)? or can DataServices be installed on the same?
Thank you,
Teresa

Hi Teresa.
Hope you are referring to BOE 3.1 (Business Objects Enterprise) and BODS (Business Objects Data Services) installation on the same server machine.
Am not an expert on BODS installation.
But this is my observation :
We had recently tested on a test machine BOE BOXI 3.1 SP3 (full build) installation before upgrade of our BOE system.
We also have BODS in our environment.
Which we also wanted to check whether we could keep on the same server.
So on this test machine, which already has BOXI 3.1 SP3 build, when i installed BODS server installation,
what we observed was that,
all the menus of BOE went away
and only menus of BODS were seen.
May be BODS installation overwrites/ or uninstalls BOE, if it already exists ?
I dont know. Though i could not fine any documentation, saying that we cannot have BODS and BOE on the same server machine. But this is what we observed.
So we have kept BODS and BOE on 2 different machines running independently and we do not see any problem.
Cheers
indu

Forum for SQL Developer and Data Modeler?

I searched now for a while all the available forums but did not found a special forum for the Oracle SQL Developer tool.
Where do I post questions about it?
Is there another, separate forum for SQL Developer Data Modeler?
Peter

https://forums.oracle.com/forums/category.jspa?categoryID=501

Suggest creat a new forum for Customer Service

The below is my shopping experience in Apple Online shop:
I order a new ipad to my freind as a gift on 11Aug2010. I just wanted to clarify the derivery date as my friend would leave HongKon from 24Aug.
Therefore,I have tried to contact HK Apple hotline and Courier(TNT), I kept calling them during 2.5 hours but no one pickup the phone or their lines were always busy. They just gave me some music and asked to wait unit it hang up. I visited their website, ask me to contact them via their ??HOTLINE?? I wasted my time and money(long distance calls).
I cant find any enquiry e-mail in your website and forum. Therefore I suggest to add a forum regarding Customer Service, as a pathform of us to discuss about your customer service.
finally, I am very disappointed about the service of HK Apple Shop, I will not order any products from your online shop if i need to wait for your delivery.
I would be gratful if you consider my suggestion.
Regards

Go to http://www.apple.com/orderstatus to monitor where your order is and how far it has gotten.

Difference between Data Integrator, Data Services, Federator & Data Manage

Hi,
What is the difference between each of the following components of SAP Business Object?
Data Integrator
Date Services
Data Federator
Data Management
Do these not do the data integration (ETL)? Is so, why a Data Integrator is a must for Rapid Mart not any of the other listed above?

Thanks for the to-the-point response. It was really helpful. Isn't SAP BusinessObjects Data Federator is also a kind of integrator? The following link mentions "SAP BusinessObjects Data Federator can help you rapidly integrate data in real-time"
http://www.sap.com/solutions/sapbusinessobjects/information-management/data-integration/datafederator/index.epx
Or if I put it differently: Data Federator is used when physical integration is not required, and provides the functionality to integrate data virtually in memory.
Please correct me, if I am not.

Master Data Service export data on-demand

Hi folks,
Background: In my current company the business users maintain a huge quantity of master data using
excel. Then a series of SSIS jobs are edited and manually executed.
Goal: the challenge is to replace this process using MDS. One of the requested features is the possibility for the users to edit or insert new master data using the Web UI or the Excel Add-in and when they are done perform a merge of the master
data in the target, in this case in the reporting DB.
Have anyone of you faced a similar situation?
The perfect solution for me is something like trigger the execution of a SSIS package to export the data from the subscription views to the reporting DB after the business
rules are apply to a specific entity.
Any comment or suggestion will be appreciated.
Kind Regards,
Paul

You can trigger an SSIS package execution in a
Custom Workflow.
The simplest way is probably to create a SQL Agent job for your package and then call
sp_start_job from your external workflow code.
David
David http://blogs.msdn.com/b/dbrowne/

Install of Data Services as active/passive behind F5 load balancers

I currently have two RedHat 5.5 x86_64 hosts, SAP_DS1 and SAP_DS2, and 1 database, Oracle RAC 11g and 1 F5 LTM load balancer sitting in front of the two hosts. The F5 load balancer VIP is set up as active/passive (fail-over) for the two hosts.
Will I need 2 local databases 1 central database or can I accomplish this with one local database?
Please advise on the recommended method for installing BOBJ DATA SERVICES XI 3.2 on two Linux hosts in an active/passive design.
Thanks

You might have better luck asking this question in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean
P.S. to moderators: can you create a sticky post to this effect?

Data Services Designer Question

Hi Friends,
I want to sign onto the Data Services Designer without having to connect through the CONSOLE directly. What BOBJ client software will I need to install to be able login into the designer?
I installed the BOBJ Enterprise Client Tools but there was no option to choose the Data Services Designer to log in with.
Any help would be much appreciated.
bobj-wannabee

Hello
I recommend to post this query to the [Enterprise Information Management|Data Services and Data Quality; forum.
This forum is dedicated to topics related to Data Integration (Data Integrator, Data Federator, Text Analysis for Data Integrator, Rapid Marts, and Integration for PeopleSoft Enterprise), Data Quality (Data Quality and Data Insight), and Metadata Management.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Enterprise Information Management queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

Forum for Data Services, RapidMarts, Data Quality

Similar Messages

Maybe you are looking for