Forum group for OUCSS

Hi,
Can anyone please let me know whether we have a separate forum group for OUCSS?
If not, which one among the below is the appropriate group to post the questions related to OUCSS?
. Oracle Utilities
. Webcenter Portal
Thanks,

Similar Messages

Product heirarchy vs material groups for sales

Hi,
Can I make use of the material groups(5 in toatl in sales view1) to generate report for seeing the value/sale of any material instead of using product heirarchy ?
If I have created a 3 level heirarchy then how best I can use it to see in a report for any level.
Is there any standard report availble to track my sales/inventory needs based on product heirarchy ??
How can I track my purchases/open orders based on the employee resonsible for that material.i.e without having any HR module how can use the or create the staff of my company engaged in purchasing or for that matter selling also.
May be I can use Purchasing group for each employee.But then I need to use the same employee as Sales person.
How can this be achieved or any better option ??
Thanks in advance.
Regards,
Manoj

Redundant.Has been reposted in MM forum.Do not reply here

Open Item Clearing Differences - Tolerence Groups for specific GL Acctts

Dear Forum,
We have a situation where we need to set up different Tolerance Groups for Clearing Differences for different GL Accounts, such as for GL Account for GRIR Clearing Account, we do not want any clearing differences and therefore the tolerance limit should be zero. But for Clearing of other GL Account we intend to set up the tolerance limit, say, upto maximum of USD 1000. The issue is that we can define the Tolerance Groups for Employees under OBA4. However we are not able to restrict this Tolerance Group, with a maximum limit of USD 1000 for Clearing Differences, to a particular GL Account. How can we do this? There is a risk that this Tolerance Group Employee may perform the Clearing of the GL Account for which we want to have zero tolerance.
The suggestions and ideas from experts will be highly appreciated as we intend to resolve this issue.
Regards

Hi,
You can define tolerance group for GL account in transaction code OBA0.
T-code (oba0)
(This is to be done before Clearing the GL open Transactions)
Define Tolerance Group for GL Account
Financial Accounting
GL Accounting
Business Transactions
   Open Item Clearing
    Clearing Differences
     Define tolerance for GL Accounts
GL tolerance group should be assigned in GL master data using transaction code FS00.
GL account master data > Company code segment > Control Data > Tolerance group.
If you donu2019t find this field in GL master data then you have review field status of GL account group in IMG.
Thanks!
Raju
Edited by: M V Narayana Raju on Sep 17, 2010 2:36 PM

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Authorizaton Group for MB51

Hi,
We want to limit users to only seeing movements for a custom material type ZRSA. . There are 5 storage locations currently that we have for Maintenance and that authorization object M_MSEG_LGO is set to those types.
I went in transaction SU24 (maintain the assignments of authorization objects) and set the
check indicator to include object M_MATE_MAR (Material Master: Material
Types ) for MB51 meaning an authorization check will be carred out against this
object in MB51. This was needed to limit users with this role to
seeing only ZRSA material types. How and where do we create the Authorization group for BEGRU to bec checked in auth object M_MATE_MAR? Is this even possible.
Also how can you create an entry into table TMBG (Material Master authorization groups)?
Thank you so much,
Jennie Winn

Jennie, unfortunately it is a wrong forum. Try it in Security related forum.
Regards,
Prateek

Security permission to user Group for menuitem in ax 2012

Hi experts,I have a query,
Query is that i want to give menu item level permission to user group,for e.g i want to show accounts Payable
all set up parameter to Finance Group,so how it can be done? i don't want to use Roles--->Duties------->Privileges method,
I want to just create two groups for one ACount Payable set up parameters will be showed on main ,and for
other group it was disable?
is that possible with out creating new roles ,duties and then privileges procedure?

Hi Munsifuv. You might get more help on this and your other AX questions on an AX-specific forum. We can help with connecting Power Query to data sources, but aren't necessarily experts on configuring those sources.
Thanks,
Ehren

Avoid Duplicate Tasks when Expanding Groups for Custom Task Process

Is there a way to:
Avoid Duplicate Tasks when Expanding Groups for Custom Task Process?
I've got a people metadata column that I am planning on putting groups into. I want the groups to expand and send a task for all users in the groups. I also want to avoid creating multiple tasks if a user happens to be in two groups at the same
time.
I'm trying to work out a way to assign users a read task based on job training requirements. Right now assigning groups and using a workflow task to confirm read is what I'm trying to accomplish. I just end up getting two tasks for a user if
their in multiple groups.
David Jenkins

Hi David,
Please verify the followings:
After Participants, select Parallel(all at a once)
Expand Task Options, select ‘Assign a task to each member within groups’
Open the action properties, make sure ExpandGroup is Yes
Also in SharePoint Designer ,you can edit the property for the Start Approval Porcess to enable ExpandGroup:
Reference:
https://social.msdn.microsoft.com/Forums/office/en-US/d14da1c4-bd5a-459b-8698-3a89bb01e6ad/expand-groupnot-creating-tasks-for-users-issue-in-sharepoint-2013-designer-workflow?forum=sharepointgeneral
https://social.technet.microsoft.com/Forums/office/en-US/ac245d45-ff66-4341-815c-79213efc4394/sharepoint-2010-designer-workflows-and-sharepoint-user-groups?forum=sharepointcustomizationprevious
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ISE: create rules with AD groups for Users and Computers

Hello,
We've just begun to work with ISE.
Is it the good place to post on ISE, or there is a dedicated forum in another place?
We'd like to create some rule depending of Computer member groups AND Users member groups from AD, but we meet some difficulties.
We've created AD groups for Computers and Users depending of their Department:
Users_1
Users_2
Computers_1
Computers_2
When we create some basics rules regarding one group only:
- with a group Computers_x to attribute a specific VLAN to a computer (when no Windows session is opened), it runs correctly.
- with a group Users_x to attribute a specific VLAN to an user (when Windows session is opened), it runs correctly.
But when we create a rule regarding a group from Computers and one from Users, to attribute a specific VLAN to an user on a specific computer, this rule is not applied.
Is it possible to use ISE on this way?
Thanks for help.
Regards,
Chris

Enable EAP Chaining— if you want Cisco ISE to allow authentication of both machine and user in the same EAP-FAST authentication.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_80_eapchaining_deployment.pdf

Where is the discussion group for iPhone developers?

I have tried, but faild, to find any Apple hosted group for us new iPhone developers. Are we suppose to post our questions here?
/BE

There are number of web sites dedicated to development on Apple platforms, many of which have forums. I haven't seen any sites or forums specifically dedicated to iPhone development, but I have little doubt that one or more will appear. None will be able to discuss any item that's covered under Apple's nondisclosure agreement, which will undoubtedly included the iPhone 2.0 beta, but there should be useful discussions nonetheless. You can start with CocoaDev's forum:
http://cocoadev.com/forums/
and keep doing a web search for something like "iphone development" over the coming weeks for sites specifically dedicated to the subject.

Right group for questions upon SMT? (Subscription Management Tool)

Hi.
the group list doesn't seem to have a group for SMT?
(Subscription Management Tool)
tx, Rudi.
IT-Beratung Rudolf Thilo
Schweinfurter Str. 131
97464 Niederwerrn
Germany

On 14/10/2013 09:59, Rudolf Thilo wrote:
> the group list doesn't seem to have a group for SMT?
>
> (Subscription Management Tool)
SMT is a SUSE product so therefore the forum should be @ forums.suse.com
but you're right there is no specific SMT one. I'd use the SUSE Manager
one @ https://forums.suse.com/forumdisplay...2-SUSE-Manager but
making it clear in subject it relates to SMT.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

What forum is for Apple IDs?

Sorry for posting here, but there does not appear to be a forum regarding Apple accounts.
I need info on how to access the list of registered software on my Apple account. The web site lets you change your info and register products, but I can't find a listing of what I've registered and there is no forum discussion group for dealing with such issues.
Any suggestions?
THX

"Any suggestions?"
There is no forum. Call Apple support.

Google Group for Keynote

I do some advanced work in Excel and often need advice, tips, etc. A dependable resource has been a Google group (microsoft.public.mac.office.excel). Does anyone know of a similar Google group for Keynote? This shouldn't be interpreted as a criticism of the value of this forum; I'm just looking for another resource.

I do some advanced work in Excel and often need advice, tips, etc. A dependable resource has been a Google group (microsoft.public.mac.office.excel). Does anyone know of a similar Google group for Keynote? This shouldn't be interpreted as a criticism of the value of this forum; I'm just looking for another resource.

Get all Groups for current user

Hi I try to get all groups for the current logged on user. This is what I do:
First I try to search with the IGruopSearchFilter to obtain all unique Group IDs. I always get an proxy error by doing this, maybe the query is to much.
Then I want to use the method group.isUserMember(user.getUniqueID() to check whether the user is a member of that group or not.
Is there a better way to obtain all groups for a user (without using a query IGroupSearchFilter)?
Thanks ahead for your help.
Burkhardt

Burkhadrt,
have you tried this?
https://media.sdn.sap.com/javadocs/preNW04/SP2/60_sp2_javadocs/ume/com/sap/security/api/IUser.html#getParentGroups(boolean)
This should give you an iterator for all groups the given user is assigned to.
Hope it helps... and if so:
if (helpful) {
points++
Regards,
Dominik

Authorization Group for G/L Account

Hi,
What?
- I wish to restrict the 'posting' of a G/L account to be done by certain users only
How?
- What I have done was...
a) From FS00, I have added a free-text (BANK) into the Authorization Group for a G/L account
b) From PFCG, a new role was created to allow these 2 Authorization Objects, F_BKPF_BES and F_SKA1_BES
c) 'BANK' was entered for the Authorization Group for both these 2 Authorization Objects
d) From there, I have assigned this new role to the user that I wish to allow Posting of the G/L account
Problem?
- Other users still can do Posting for this G/L account
- Any steps which I have missed out here or done wrongly?
Thanks,
Brandon

Hi,
Some other roles of the users may override and cause the users to post against this GL account.
Check all the roles relevant for the restricted users.
Use SUIM t-code to find if the auth object mentioned above is included in any other role.
If it be, restrict that again.
Generally if one role as no restriction against this auth and not all, this issue tends to happen.
Regards,
Sridevi

Invoice grouping for completed invoices

Dear Experts,
i have requirement where i want to group invoice which are complete and assign an output type for it to get invoice list in the print.
option i tried.
As discussed sometime back, i tried with VF21 for invoice grouping for completed inovices.
Our IDES allows to group inovices in VF21 those are complete but in my client system it does not allow.
My VOFA for F2 has LR in Invloce list type in both the machine
Copy control exisiting for F2 and LR existing in both
In OVV7 invoice type(F2) is assigned to an invoice-list type(LR)
only difference i found is FActory calender is assingned to Cusomer in client machine but assigned in IDES
and in turn FKDAT_RL in VBRK table(VF02-Goto> Header>Header) is blank for completed inpvoicesin IDES. but it is filled in IDES
is that the reason it is not allowing in client box.
If so how to go about it, it is not allowing to change FKDAT_RL in VBRK table(VF02-Goto> Header>Header)
is there any other option other that VF21 where in i can group invoices which are complete and assing out put type
Kindly help or suggest
Regards
Siva

Hello Siva,
In order to create an invoice list, it is mandatory to maintain the field "InvoicingListDates" must be filled in the Customer Master.
Regards,
Raghavendra

Forum group for OUCSS

Similar Messages

Maybe you are looking for