Forum Hosts

I'm going to start this over.
After the forum transition, for the most part, there will be little change in the people that spend time in any area of the forums. People that have been asking and answering questions will be the same people that have always been there, including hosts.
A group of people that have been actively working in the MM side forums, and who will continue working in those same areas after the change, have been invited here a bit earlier because, for the first time, they will have the same hosting rights in their areas that hosts on this side have always had... and we wanted to give them an opportunity to learn how to do the housekeeping that they haven't been able to do over there before.
In addition, we will all soon have an opportunity to start learning the new software, and we (including everyone that helps with the preview of it that John has discussed) will be able to help others find their way about once it goes public.
The new hosts will need to not only learn the new software along with others, but they will also need to learn how to do the hosting bits. And they and the regulars in their areas will need to figure out their best ways to report issues to hosts to clean up, as we have been doing in the comments forum on this side for the life of these forums.
Since, in addition to all of the above, newcomers to this side will also be learning this current software, please feel free to help them with that. We still have to point out to folks how to use subscriptions and the message center and such. As familiar as we are with it, it is not an intuitive way to follow forum posts.
We will all be meeting new folks as they come from various areas to find out about the changes. We will all be learning together, and, hopefully working together, to make the transition as gentle as it can be. Please help be part of the solution.

John would have to weigh in on who would be at the back end of it or whether we will actually use it or not, but there is a "report abuse" link in each post as part of the new software. *My* ideal for that would be to have it send a post to a thread in the hosts backroom so anyone that would be handy would be able to take care of it immediately. No idea whether that might even be possible tho. I *think* the current report link goes to an employee group, and hasn't proven to be as effective as people would like. Hopefully, if they incorporate the link into the final setup, it will be an effective tool that will receive a timely response 24/7.
But, since hosts will have edit/delete ability in the new software, they will likely be fairly quick on the scene with or without the link. In time methods will likely develop between regulars in different areas and the hosts so that people will be able to post alerts similar to what we use in the comments forum here... http://www.adobeforums.com/webx/.59b7a9f3/90
It's all still way too early to have any real guess what will work best, but that is sorta somewhat what I might expect.

Similar Messages

  • CS4 Master at [deleted by forum host]

    Hi,
    I am looking into purchasing the CS4 Master Suite and, of course, look for the best price since my funds are very limited. Now I found these two retailers who sell the suite for $1399 while you can purchase the suite here at Adobe for $2700. These two retailers claim that the software is 100% genuine and the full version. What is the catch? Did anybody purchase the software at one of these retailers? Their reviews are 99% positive and they are accredited BBB businesses.
    I just want to be sure that I will be able to upgrade later to the next version without any problems.
    [deleted by forum host]
    Thanks

    Frank,
    On behalf of Adobe, I can assure you that what is being offered you isn't "genuine."
    What you
    may get from these so-called retailers is either:
    (1) A pirated copy of the software or even a beta test version of same with a crack to get around the activation mechanism.
    (2) DVDs with a stolen license key for a volume license meant for a large, single organization.
    (3) DVDs (sometimes a set of 30-day evaluation DVDs) with an educational version serial number meant for use in large educational organizations.
    (4) Stolen goods.
    Contrary to the claims of such websites, Adobe does
    not sell so-called OEM versions of this software. Nor do they sell it in bulk packs without a box.
    Unless you are getting a factory sealed box that does
    not say anything about a student or educational version, you are acquiring illegal goods. And you better be careful about sealed boxes as well.
    By the way, the BBB (Better Business Bureau) does not accredit any businesses.
    In virtually all cases where we have heard about such bargains being offered to end-users, it turns out that the vendor is
    not an authorized Adobe reseller and what is being offered is either pirated, stolen (either individual boxes or serial numbers for volume licenses), or improperly sold educational/student versions.
    There is no reason for any authorized Adobe reseller to sell this software well-below their cost or even the cost to the distributor they would purchase legitimate copies from.
    A deal that is too good to be true usually is!
    - Dov

  • Gandhi quote for employees of any entity-and forum hosts

    This is a genuine, well-known quote by Mahatma Gandhi, the Indian spiritual leader and activist:
    • A customer is the most important visitor on our premises, he is not dependent on us. We are dependent on him.
    • He is not an interruption in our work. He is the purpose of it.
    • He is not an outsider in our business. He is part of it.
    • We are not doing him a favor by serving him.     He is doing us a favor by giving us an opportunity to do so.
    Employees of any entity, whether in government or in private business, will do well to keep it in mind and at heart.
    The recent post by Kathy Nguyen, universally well received here, shows that she knows this principle and puts it into practice.
    However, a few Adobe staff and associates seem somehow to think that Adobe's customers are lowly adversaries in some sort of Internet game or in a newsgroup.  Those who manifest that misguided and poisonous attitude in this forum and in their blogs are showing their incompetence and their ignorance of basic business principles.  To them I say:  you're dead wrong!  You are far from being our superiors, you are our servants.
    They should know well who they are—and we certainly do.

    I would like to reproduce here what I wrote in the 'What happened to the "Ghandi thread"?' thread, in an attempt to try to avoid that this one follows the same fate than the previous one...
    3. May 10, 2009 4:24 PM in response to:                                     Buko.
    Re: What happened to the "Ghandi thread"?
    Buko. wrote:
    I thought it was very relevant in light on the attitude of some of the hosts and Adobe employees. That's why it got pulled it made them look bad.
    It certainly was, at the beginning. Unfortunately, it soon became infected by off topic and "witty" comments. Finally there was a long series of abusive and I would say even insulting posts by the same person (I would say they were more than eight). I was one of the few persons to protest for this, but I don't think that removing the whole thread was the best solution.
    I would therefore like to request Ramón to start the thread all over again, and fellow users to make an effort to keep on topic. As I have already said at least twice elsewhere, this Discussions forum is looking too much like a twin of the darkest part of the Lounge. I, at least, don't think it should be allowed so much lattitude, although I agree in that some amount of humour may help to alleviate what I see as a growing state of unwanted and unneeded confrontation.

  • PSE 10 Sign-in hangs (title edited by forum host)

    Why can't I sign in to my PSE 10 program?  The "sign in" box just hangs there.

    Photoshop.com is gone. It was replaced by Adobe revel. If you had photos at photoshop.com you should have received several emails before, during, and after the move explaining it. Just sign out of photoshop.com, since there's nothing to sign in to anymore.
    There's more info about Revel here:
    http://forums.adobe.com/community/ps.com_sharing_and_storage
    PSE 10 knows nothing about revel. Your photos are there but you can't get to it directly from PSE. You will need to use a web browser instead.

  • Question for Forum Hosts

    Sorry, this is a question for you about how this forum works or what options I am supposed to use, versus being a new problem... I couldn't find a "Contact Us" link to get this question to you any other way.
    I posted a message (marked as a question), "Wireless-G Card causes Tecra 730CDT to Hang," on February 14th. I got a reply from "Quad" and I then replied to that reply (and marked it "still not answered"). The now 3-part message was on the main forum list for about 1/2 day and then it disappeared from it completely. I can do a search and find the original message and the 2 replies, but they are not on the main list.
    I can't figure out why it is not on the main forum list. Did I do or say something wrong so it was dropped from the list? Did I fail to do some step or check some box that is required before it can return to the list?
    I really would like the original message and replies back on the main forum list, as I still have the same problem and am hoping someone will see it and provide a solution to my problem. Please advise.
    Thanks,
    [email protected]

    Hi Ivan,
    First, thank you very much for clearing up what I thought was a mystery of my disappearing posting. Basically, I thought my problem belonged in the TE and Tecra Series forum (what I thought of as the "main page") and was dismayed when I couldn't find it in there. Yes, the Wireless Board is definitely the more appropriate spot.
    Secondly, thank you too for your opinion on my attempt at jamming Wireless-G onto my old laptop. I am seeing that you and Quad must be correct... the fact that the 730CDT works so well with my 10/100 wired card made me feel it could handle everything.
    I have to admit I have never tried slower Wireless-B. Technology has moved so fast and prices have dropped so much that it was cheaper to buy a brand new boxed kit (router and card) for Wireless-G than it was to buy an old Wireless-B set up... I got caught up in getting the best deal instead of making the best technology match.
    I will close this question on "where's my posting?" but will leave the original "730CDT Hang" posting alive for awhile longer.
    Many thanks again,
    Wayne

  • Forum hosts: questionable user

    As discussed in an earlier topic... one antagonistic / offensive user I've come across so far...
    http://discussions.apple.com/profile.jspa?userID=648892

    I have reported him.
    Ben, thanks for bringing this one to our attention. Something that we have discussed at length with other L4/5s as well as the Apple hosts is that people like this should not be responded too, but reported and allow their post to fall out of the top of the discussions. If people post and keep repsoning, the topic stays near the top where more people will see it.

  • Forum etiquette and best practices

    Do:
    Respect others
    Assume good faith
    Share what you know
    Be kind to newbies — we were all new once
    Encourage others; recognize and praise good work
    Attract and honor good, knowledgeable people
    Ask for help, and help others in return
    Set a good example
    Add information about yourself to your forum profile
    Visit the Forum FAQ
    Don't:
    Infringe on copyrighted material
    Use obscene or offensive language
    Personally attack people, their edits (including spelling or grammar), or their comments
    Rant or otherwise harass, abuse, or intimidate others
    Use multiple accounts to agree (or argue) with yourself
    Post anything you don't want the world to see. This is a public space
    Post content that violates Adobe community guidelines, adobe.com Terms of Use, or Adobe privacy policy in any manner
    Post other people's confidential or private information without their express permission. This includes email addresses, street addresses, telephone numbers, content of private forum messages, etc.
    Be afraid to identify errors or shortcomings in Adobe content. Your feedback is important!
    Personal insults, verbal attacks, and generally offensive, disrespectful, or  abusive messages will be edited or deleted by forum hosts. Repeated violations  will result in temporary suspension of forum access, eventually leading to being  banned from forums. Spam messages will be deleted immediately, and the user account will be disabled in the forums.
    Self-promotion and signatures:
    The Adobe Forums do not provide for automatic signatures in your messages. But you can put information, such as a personal web page, in your forum profile. When users click your name or avatar they will be taken to your profile page, where they can find your URL and a short bio. To edit your profile, click the Your Stuff link in the bar at the top of the forum, select Profile from the list, and then click Edit Profile.
    If you have a link that is germane to the topic under discussion you can post that in your message. But we discourage links to commercial sites. Forum hosts may remove links at their discretion.

    Kath-H wrote:
    is already in the sticky threads you find by clicking 'overview' - or otherwise stumble over by accident. Along with the FAQ.
    Sometimes an extra reminder that people should be respectful of one another is in order. People have been clicking the abuse link on threads that are crossing their border. That is the reason I bumped it.

  • Can anyone tell me if anyone from Apple reads these forums

    *Can anyone tell me if anyone from Apple reads these forums and does anything about the issues experienced?* I still have a faulty proximity sensor, even after the latest download. I went to the Apple Store and they told me to stop using it with the leather pouch, but it doesn't make any difference. I even tested the test models in the store and they did the same thing.
    *Has anyone been able to fix the proximity sensor fault on their phone so that it doesn't come on whilst your talking?*
    Someone please help. I loved my iphone 3G, but the iphone 4 has caused me to become so disappointed with Apple. I'm even thinking of moving to the Samsung Galaxy, which has Google Android capability, moving background wallpapers, bluetooth capability, video capability that is compatible the a variety of media players (not just Quicktime), the ability to send business cards to non-apple phones and the ability to be used as a USB drive without needing wifi or itunes.

    These Forums are mostly users talking with users, now and then you may see the grey Apple icon of an employee/genius posting and the purple Apple of a Forum host but they aren't here to pass on feedback.
    The best way to make your point is to send feedback here:
    http://www.apple.com/feedback/iphone.html

  • How to create a forum/discussion

    Forgive me if this subject has been covered,I am looking at starting a forum about the industry I work in with the view to raising revenue through advertising on the site/forum,all the free programs seem to have advertising built into their templates. I have downloaded phpbb2 ,but it all seems pc based.
    Is there a mac friendly option ?. Here are a few examples of what I want to achieve;
    http://forums.mercedesclub.org.uk/
    http://www.footballforums.net/forums/premiership/
    thanks !

    Also to have
    some control over the appearance and to use my own
    domain name,rather than
    Then you need to go buy a domain name and sign up for a web hosting service which offers forums as part of its package. Just do a google search for web hosting. It's not realistic to think you can do what you want for no cost. Unless you are thinking of running it all from machines that you own yourself?
    Here's one:
    http://www.siteground.com/forum-hosting.htm
    Whether they let you sell ad space I don't know.

  • Most Popular/Best Iphone forums besides the Apple Forums?

    Hey guys, future Iphone user here. Besides these forums, what are the best/most popular/most useful Iphone forums out there?

    First, welcome to the forum. As a future iPhone owner I'm sure you'll be really pleased when you get yours. The reason no one is answering you is this is a forum hosted by Apple for Apple users and is really supposed to be about iPhone support questions. Things like how do I? Or why can't I? Google is your friend and if you're looking for other sites, just google iPhone forums and you'll find what you're looking for.......

  • How to develop discussion forums using java

    Hi, can any one kindly explain how to develop disccussion forums using java.
    the application is like same as this forum. one post and the replies are come after that. creating new threads.
    any tutuorial is available for this. what is best dabase for this. and which application server is required.

    if you want to use a forum for sum purpose download an opensource forum software and deploy it in a server that support the serverside technology that it uses.
    If you dont want to go through the trouble of installing the the forum software (normally there is a quaita bit of configuration to do). Goole for Free Forum Hosting and you will get plenty of places that hosts forums for you. Since they do the installation you dont have to wory about that part.
    If you really want to develop a forum software first install an existing open source forum or get an account in a free forum hoster and take good look at the forum software and the features that it provides.
    In here you only see the front end of the forum. The back end is much more complicated. You have to define forums and forum groups, you have to define user groups, you have to define which users has access to which forums. who can start topics and who can reply to topics and whgo has read only access. And how to clollect and stor statistics like number of posts by each user. And the list goes on...
    So first take a look at the features in both front and back end of an existing forum software and decide what you want in your software. Then you can design the database to support those features. And then start coding.
    Technicaly you will need to know how to do servlets/JSP and JDBC in order to build a forum. Most important part is you have to do lots of planing.

  • How can I transfer licenses from a PC to another one?

    Dear Sir/Madam,
    in the course of the next week (Mon April 9, 2012 – Sun April 15, 2012) I will replace my present PC with a new PC. The older PC will not be used any longer. I should deeply appreciate receiving detailed step by step instructions to employ in the new PC the software I purchased from you, namely Acrobat and Dreamweaver, activated in my present PC and consequently on how to transfer the relevant licenses e the corresponding activation codes from the old PC to the new PC. I am waiting for your quick answer and send you best regards.
    Sincerely
    Sergio De Rossi – Roma – Italy
    [ edited by forum host - email address removed ]

    Simply choose Help --> Deactivate in both apps with the option to erase the serial from the system, then reinstall your software on the new system and activate it.
    Mylenium

  • What category for this wiki data?

    INTRODUCTION:
    Flash-based systems are appearing at a fast pace. This wiki presents one way to employ flash drives in
    an arch-based "LIVE" arrangement.
    It is important to note that the system must operate from "IDE" in order that the flash drives utilized
    are recognized as "TRUE IDE" devices thus permitting full "UDMA" operability. In addition, an
    adapter having "UDMA READY" must be used to interface the Compact Flash (CF) to the IDE 80-
    wire interface cable. The CF card(s) must also be "UDMA" rated.
    The system herein described has no HDD's and can be described as "DISCLESS".
    Two CF/IDE interfaces are utilized. When employing CF/IDE adapters, only one such device is usable
    on a given IDE 80-wire cable at a time. A "slave" device can be provided on the adapter but it cannot
    be connected simultaneously with a "master" CF card on the same cable.
    The present 2.6 kernels include provisions which eliminate the application of 80-wire cable parameters
    to IDE busses such that normal boots using standard kernels prevent "TRUE IDE" operation of the CF
    card(s).....thus, the operations are limited to UDMA 2 mode even if the UDMA RATING is much
    higher.
    Therefore, the requirement for "IDE" operation of the system is imperative and applies to the
    remainder of this "DISCLESS SYSTEM"description.
    SYSTEM DETAILS:
    Both the the primary and secondary IDE busses are utilized. The primary buss IDE cable has the
    "boot" CF card and the secondary buss IDE cable has a cachedir CF card, each having an adapter and
    connected via normal 80-wire cable. The operation of these adapters is powered by the 4-pin power
    connector of the type provided to power the floppy disk peripheral device.
    Some of the detailed results of performance outlined in this wiki apply to my system and its capabilities
    with respect to speed and veratility. (1600mhz cpu and 3GB ram).
    The system being described is arch-linux based, with larch "Live" system elements and Faunos
    elements added. It utilizes pacman and aufs for its basic operational utility.
    SYSTEM PHILOSOPHY:
    Operate as much as possible in ram.
    The primary CF card contains the boot Faunos system. It is squashfs compressed and has ~600 arch-
    linux packages, includes pacman, aufs and PacTrac capability. It executes in ram as a r/o source.
    The secondary CF card is used as a local cachedir to archive any and all upgrades to the operating
    system. As such it enables storage of downloaded packages for use at users discretion. When loaded
    into the system via pacman/aufs, the packages are decompressed into ram and operate therein, entirely
    in ram.
    Downloading packages into the cachedir permits the storage of several versions of a given
    package...the original package is NOT OVERWRITTEN, thus flash device life is unaffected. Also,
    the user can revert back to a previous version and it will be INSTALLED INTO RAM.!
    SYSTEM CONSEQUENCES:
    The need to "SAVE SESSION" via the Faunos system is reduced or eliminated at the users discretion
    thus providing fastest reboot time.
    "REBOOT" of the system without "SAVE SESSION" removes any and all packages added via the
    use of the cachedir archive.
    Adding packages in this manner allows checkout of new package impact on the system without
    interfering with the basic boot system.
    Power savings are obvious!
    Downloading via mirrors (many throttled) takes much time! The power required to download
    into HDD is nearly fully eliminated with no increase in delays (actual speed of CF is 40+MB/sec
    for UDMA 4/5).
    INSTALL from cachedir is at 40+MB/sec with UDMA 4,5.
    System cache in /var/cache/pacman/pkg is not utilized.
    PacTrac in Faunos provides a complete log of installed programs (including those installed to
    ram by cachedir) and the last installed version as well as a listing of installable programs via
    pacman. This program is inherent in Faunos boot flash device.
    Additional elements of video, graphics and text can be include in the cachedir . For example, a
    1GB .avi. This video file can be entered in ram via tmpfs and the player via pacman into
    ram...then execution and data are all in ram. The tmpfs video file can be deleted and another
    video file inserted...ad infinitum! All is readonly for the flash drives after initial install of the
    video file(s) to cachedir. A text file to provide a paste of pacman install commands for cachedir
    package groups is also an aid to users if incorporated in the cachedir.
    Larch systems would provide a similar capability except for the PacTrac that Faunos provides.
    The cachedir appears in the system as a media diak.
    All USB functions are available and a USB/HDD adapter permits access to external HDD data
    and storage. Also, external CD/DVD devices are similarly available although DVD play is not
    clean. Best is to put .vob in files of the cachedir.
    Moore's law applies to flash devices!!!!!!!!!
    INSTALLATION:
    This wiki is based on demonstrating the "LIVE" flash drive capabilities introduced by UDMA capable
    flash devices with archlinux based operational capabilities. Therefore, an arch-based installation is
    required. In this wiki, that is Faunos which is flash-installed, based on archlinux packages and Larch-
    derived install parameters. A 2GB compact flash drive is recommended with adapter, either for HDD
    use or a USB adapter, preferably a 2.0 unit.
    Faunos is soon to be released in "STABLE" version. It is maintained by RAYMANO at
    faunos.com.
    The download of faunos is installed via...."dd if=(faunos downnload.img) of=/dev/sdx".......
    The....of=/dev/sdx....is important.....do not use ...of=/dev/sda1 for example......
    If you download the usb.img. Do not change the name of the download to ....faunos.img... because
    the download has that file within it and will only address that file.
    When the flash drive is first ready to be booted, do not boot on it until you have re-sized the linux
    partition from 1GB to ~1500MB . Do so with gparted as root. Provide linux swap at this time if
    you desire.
    When ready to boot, install in primary HDD slot with adapter and set bios to recognize the flash
    drive. Some flash units do not have a label, they appear as brackets [        ] but are fully functional
    as boot devices.
    After reaching the Desktop, the internet parameters are established in WICD.
    Editing of /etc files is then accomplished as desired. Reboot and save session.
    The system can then be shut down to allow install of the CF/IDE in the secondary IDE cable.
    CONFIGURATION CHANGES FOR UDMA CF/IDE:
    At this point, a change is necessary in the boot CF/IDE device in the primary IDE slot to enable IDE
    MODE OF SYSTEM OPERATION.
        1.  Boot into Faunos.
        2.  Select "log out"
        3.  Select "end session"
        4.  "log-in" as root with root password.
        5.   With "archlinux" desktop displayed, select kwrite editor.
        6.  Go to /lib/initcpio/hooks/larch/
        7.  change: ....................line (96):
                                ....for d in /dev-sd[a-z][0-9]* ; do
           to................for d in/dev [hs]d[a-z][0-9]*; do
        1.  Edit /usr/share/larch/initcpio/mkinitcpio.conf...... as follows;
        2.  hooks="base udev fbsplash ide scsi usb larch1 larch2 larch3_aufs splashy"
        3.  Select "STORAGE DEVICES" and open the "livesys/livecd" device,
        4.  Delete file "faunos.img" to trash bin.
        5.  Perform the following to generate a new "faunos.img"
                in terminal as root: .....mkinitcpio -c mkinitcpio.conf -g faunos.img.....
            Install the faunos.img thus generated into "livesys/livecd" in the place of the original
            faunos.img.
            6. Reboot and "SAVE SESSION".
    TROUBLESHOOTING:
    The performance of the CF/IDE devices can be verified by use of hdparm.
    All devices in "STORAGE DEVICES" are identified as "media".
    See FaunOS forums for advice on boot problems or system related issues.
    CACHEDIR PARAMETERS;
    Loading of the cachedir via pacman is accomplished with the following command in terminal:
                                .....pacman –cachedir /media/disk -Sw (package name) ,,,,,,,
    This places the named -i686.pkg.tar.gz in the cachedir. The locale of the downloaded package may be
    a previously established folder, in which case the /media/disk/folderID is used in the command.
    Other files of interest may also be loaded from HDD via a primary IDE install or a flash drive via USB
    or an install via USB/HDD source. Additionally, pacman Syuw is usable:
                       ............pacman –cachedir /media/disk/upgrade -Syuw.........
    This assumes the generated "upgrade" folder.
    Subsequent installs to cachedir do not overwrite existing packages, but make new entries.
    Installing the package(s) is done with the following pacman command:
                            ........pacman -Ud /media/disk/upgrade/*-i686.pkg.tar.gz...
    This example assumes the -Syuw case of installing all packages. They can be individually installed as
    desired.
    Packages installed via pacman/aufs are in ram by default. w00t!!
    MORE RESOURCES:
    Full disclosures of problems and solutions is provided in the FaunOS forums which has over a
    hundred registered users. This forum also includes a Larch forum hosted by Gradgrind.
    I have practiced in SANDBOX but am unaware of whether that material is reproduced in any category.
    How does a user generate several pages of data in a published wiki?  It does not seem apparent...much ado about editing existing wikis but no data on how to make a new one...correct me if I am wrong, please.

    On third thought, it certainly adds a dimension providing power savings as well as utilizing an alternate archlinux install method which eliminates the hassle in getting a DE and loads much without causing an uproar with already installed operating systems.
    Basically, it is FaunOS with Larch elements and both are archlinux based.  The best way to introduce archlinux is with such a LIVE install.  Raymano has demonstrated to many users the easy install of the program.
    It does require adjustment of the install partition at this writing.  Items needing attention are the wicd , rc.conf and rc.local as well as setting up alsa.  These are required in all arch installs and the install of any discless items is not required.
    To utilize the methods I have incorporated requires more skills...most linux users could maneuver through that should they want to utilize discless operation.  I would imagine that many could use existing CF cards even if not UDMA rated to produce a usable discless system but at a slower operating speed.  Power is minimized.
    Summary statement: A Live install of FaunOS is a [u good alternative /u] starting point for new users and it opens the door to discless operation in desktop systems.  (Laptops are a different breed and may have some advantages if dual CF adapters allow both CF units to perform simultaneously).
    Just a thought.......or two.....
    EDIT:  The final release of Faunos is in the works..at present in test phase and posts regarding it are in testing mode rc4.  The next two weeks or so should provide the stable release of the latest FaunOS Live download as reported on the Forum.
    EDIT:  Installed an Adata 266x 8GB CF in the cachedir slot today.  It runs 45+ mb/s in hdparm.  I have 1.3GB of packages installed in it, r/o in the system when installed to ram via pacman/aufs.
    Last edited by lilsirecho (2008-03-11 23:51:03)

  • IPhone 5s bad connection LTE Vodafon Germany

    Hello
    My Company switch all iPhone 4 to iPhone 5s with Vodafon LTE Contract. Now Many users hab bad call experinces and bad voice quality. Vodafon told thats a problem with the iPhones and not with their network...
    Are there known Problems with 5s and Vodafon?
    Regards

    You will probably have to call Apple Support for help.
    This is a user-to-user technical help forum hosted by Apple. We are all just users here.

  • What should I do with my iPhone?

    I’m Vietnamese. My father bought me an iPhone 5s in Hong Kong on 5th, November, 2013. However, on 5th, May, 2014, my iPhone went from working perfectly fine to "searching..." for a signal despite being in an area with good coverage. I tried to turn turn on airplane mode then turn off again, switching off iPhone and switching on again, and also Reset Network Settings. However, those are can't fix my iPhone. I removed the SIM Card and put in another iPhone, I worked perfectly. I connected iPhone with iTunes to update 7.1.1 but it did not success. Finally, I decided (after creating a full backup) to put the phone into recover mode and try to restore it that way. Not only, did I get an “unknown error (1)", I attempted that many times and now my phone is stuck in recovery mode. I have sent it back Hong Kong to repair because I’m still under warranty (I asked my father’s friend help me to send, because of my studying so I could not directly come the store). From that day until today (25th, June, 2014), he called them many times, but they always said:” We will check and if impossible to repair, we will switch it for a new one”. And today, when he calls them again, they said that my iPhone cannot be replaced a new one because it has been opened????????? I am totally sure that my iPhone hadn’t been opened yet.
    I had 2 questions: the first is why didn’t they check my iPhone immediately after receiving it from my father’s friends?; and the second is that after we send my iPhone for service, I will receive a replacement or your repaired iPhone in three to five business days; but in fact, they reported it to us after nearly two months??? Who can ensure that they did not open my iPhone?
    What should I do?

    First you aren't talking to Apple here. This is just a user forum hosted by Apple. We are all just users here.
    Suggestion: Backup and then Restore your iPhone as new using iTunes on your computer.
    Test battery usage to see if it is normal. If not, contact Apple support; you may have a hardware problem.
    If battery usage is normal then restore your iPhone from the backup and continue to monitor battery usage.

Maybe you are looking for