Forum Issue - Strange behavior in threaded display of threads
Just noticed on some threads there will be a notice of a number of replies but the actually number that I can see will be somewhat less - for example there are 17 replies noted for a thread but I'll only see 12.
I use Threaded view and if I change to FLAT view, I'll see all the threads.
Any one else noticing this discrepancy when using Threaded view?
x
Yes, have you reported it in the Lounge?
EDIT: Never mind. I just went there and see that it's been reported.
Similar Messages
-
Strange behavior of the Macbook pro display
Hi to all
I'm using my MacBook pro, and notice some strange behavior after open several windows or applications, I don't know how to explain, so here is a photo:
http://www.flickr.com/photos/86155326@N00/
I have tried: go back to 10.4.6 / create a new account / Hardware test... and Nothing.
Any suggestions?
PedroI am having the exact same problem(and no one is replying to my post either), I read in another post of someone who had a somewhat similar issue and someone commented that it was bad VRAM and warranted the logic board to be replaced. I'm hoping this is not the case, or at least hoping the problem does not get worse because I am in school and can't be without this computer for 2 weeks while it gets repaired..I'm hoping I can last til the holidays...
pictures of my problem:
http://www.rpi.edu/~neala/pics/display/Messed%20up%20desktop.png
http://www.rpi.edu/~neala/pics/display/Picture%204.png
Sometimes I can make it go away by moving windows, and sometimes that makes it worse... this computer is only 100 days old...come on apple..help us out! -
Strange behavior of Planning manager
Hi All,
I am working on forecast interface, facing a strange behavior of Planning manager.
Our application planning manager is in active status, we set MRP:Planning Manager Batch Size profile value as 2000 and MRP:Planning Manager Max Workers value as 10 in our application(11.5.10.2).
we have loaded 2Lac's of records in MRP_FORECAST_INTERFACE table with process_status=2. Almost running for 12hours, even one record status(process_status) also not changed. the code which we are using to load in interface table is using in production since 3 years.. Can any one help me to figerout the issue ..
Thanksplease search this forum. it has been answered many times
over.
i dont have the thread that answers it right way - but if you
do a search im sure youll find it (i did jsut recently) -
Strange Behavior in modifying the values in VO
I have a VO based on EO from a custom table. The query is something like:
select EO.x, EO.y, (EO.x*EO.y) xy from EO
I have displayed the values from this VO on to a table in OAF page. All the columns are messageTextInput but the third column (xy) is read-only. I have written a fireAction to execute when x or y values are changed to update the xy value accordingly.
Code in CO:
if ("ValueChange".equals(pageContext.getParameter(EVENT_PARAM)))
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("UpdateXY");
pageContext.forwardImmediately(<Same Page>, null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
Code in AM:
public void UpdateXY()
xxVOImpl vo = getxxVO1();
Row r = vo.first();
while (vo.hasNext())
r = vo.next();
Object X = r.getAttribute("X");
String X_string = X.toString();
float X_value = Float.parseFloat(X_string);
Object Y = r.getAttribute("Y");
String Y_string = Y.toString();
float Y_value = Float.parseFloat(Y_string);
Float XY = new Float(X_value*Y_value);
r.setAttribute("XY",(Object)XY);
The problem is as follows. During the first time I try to update a value, the control goes through the logic and returns to the page but the XY value is not updated. But if i change a second value and tab out, the codes works and displays both the updated values of XY. From then on, the code is working fine.
I'm also not updating the first row and so I didnt perform any logic in AM for the first row.
Please help me out in finding out the reason for this strange behavior.This nature is fine, basically initially your EO x and y columns are null and unless you do a commit, these values don't go in db. The third column will take x and Y coumns values from db and multiply and will get null.
To solve this issue, you get the values from VO columns x and y in PPR and and put x*y in the third column of Vo, IN THAT ROW.or you can directly get hold of the bean which hold the value of x*y and use setValue after getting x*y.
---Mukul -
Strange behavior of Windows Azure Compute Emulator (SDK 2.3)
Today, after an update of the Azure SDK from 2.2 to 2.3, I noticed that only one of the two instances of my web role is started in
the Azure Compute Emulator, the output of the Start-AzureEmulator is this:
VERBOSE: Starting Emulator...
VERBOSE: Role is running at http://127.0.0.1:81/
Role is running at tcp://127.0.0.1:3389/
Role is running at tcp://127.0.0.1:3389/
VERBOSE: Started
and only one instance is started in the Azure Compute Emulator.
But in the past was something similar to this one:
VERBOSE: Starting Emulator...
VERBOSE: Role is running at http://127.0.0.1:81/
http://127.0.0.1:82/
Role is running at tcp://127.0.0.1:3389/
Role is running at tcp://127.0.0.1:338/
VERBOSE: Started
and two instances were started.
I already found this thread:
http://stackoverflow.com/questions/13946634/strange-behavior-of-windows-azure-compute-emulator-sdk-1-8-with-multiple-role
but it was not useful in my case (Microsoft.WindowsAzure.Common.WorkArounds.BindToAllIpsWorkAroundEnabled is False).
Thanks in advance for any help.
OS: Windows 8.1
Azure SDK: 2.3
Azure Compute Emulator: 2.3.0.0Hi,
As far as I know, powershell didn't have a parameter to start azure emulator with full express, please try to use Command-line to test, refer to
http://msdn.microsoft.com/en-us/library/gg433130.aspx for more details, if this didn't give you help, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Zenworks Agent 10.3.3 - Windows 7 32 -Strange behavior
Hi,
Here's my problem :
I have a SYSPREP fully functionnal that install the Novell Client IR9a on a Windows 7 SP1 32Bits and at the end i have a VBS File that download the latest version of Zenworks Agent installer to the local harddrive. After it installs it... Then a strange behavior happen after the required reboot by the installer.
You can't ping any DNS names until until you have rebooted your machine 3 times.
-> You can ping ip addresses but not their names.
I tried to do a flush dns realse or renew and same behavior... can't ping any DNS names.
This problem is not there if i do not install the Adaptive agent and leave the Novell Client Alone...
The Windows 7 was originally a home premium that was upgraded to a oem pro license if that can ring any bell.
Thank you.There was an issue a LONG time ago that I have not heard reported
since..........
http://www.novell.com/support/viewCo...rnalId=7004310
Maybe the old work-around will help you...........
On 1/16/2012 2:46 PM, anto28 wrote:
>
> Hi,
>
> Here's my problem :
>
> I have a SYSPREP fully functionnal that install the Novell Client IR9a
> on a Windows 7 SP1 32Bits and at the end i have a VBS File that download
> the latest version of Zenworks Agent installer to the local harddrive.
> After it installs it... Then a strange behavior happen after the
> required reboot by the installer.
>
> You can't ping any DNS names until until you have rebooted your machine
> 3 times.
>
> -> You can ping ip addresses but not their names.
>
> I tried to do a flush dns realse or renew and same behavior... can't
> ping any DNS names.
>
> This problem is not there if i do not install the Adaptive agent and
> leave the Novell Client Alone...
>
> The Windows 7 was originally a home premium that was upgraded to a oem
> pro license if that can ring any bell.
>
> Thank you.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Strange behavior when shutting down - only works once
Hi there,
I'm taking advice from around the forum to create a shutdown button for my VI. When the user sends the shutdown command, the loop stops all processes running and turns off all heaters. Then when this is complete it passes a shutdown variable to all loops allowing them to close. This seems to work perfectly once, but when I hit run again and test it again, it fails. If I abort the VI and restart again, the shutdown works. I can't quite figure out what the behavior is doing here.
Attached is my program, it's a little messy but everything works, and it has to be added to by someone who isn't me, so I tried to keep everything clear and seperate. If anyone's got any ideas as to what is causing this strange behavior I'd love to hear it.
Thanks,
Chris.
Attachments:
Main VI.vi 259 KBFirst of all, your event loop should look something more like this. Otherwise you won't exit the loop until another event comes through.
Secondly, I think you are writing to the wrong control here (this is in your timed loop). I have no clue what is in the subVI, but I don't think it should be looking at the Shutdown PB control. That control should be in it's event case. But here you are trying to cause the shutdown event, but you are writing to the wrong control.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Event Structure issue.png 10 KB
wrong property node.png 3 KB -
Strange behavior in audio editing
Greetings, I am working on a progect in logic x and am suddenly having difficulty editing audio. There is behaviour that I do not understatnd- If I use the trim tool, other regions move (I am editing a large piece, using group to edit all regions at the same time). Also after an edit, there is audio playing from some previous edit or from a track that is overlapped or something? I have toggled the overlap/ no overlap function and have been working with shuffle modes, but now it seems strange. Do I have something set differently or wrong I wonder.
Thanks for the help!
cheers---I did a quick (and dirty) fix for this, but it has one problem. After this handler has blocked the submit, you can only enter edit mode using the edit-button at ribbon. Edit button at upper right corner stops to work for some reason. After site refresh everything
works again, so not a major issue.
<script>
// SharePoint input element bug handler
// More bug: http://social.technet.microsoft.com/Forums/sharepoint/en-US/33df42ba-00b3-41a8-8fb9-f8187cfc216d/strange-behavior-in-firefox-input-text-with-enter-opens-page-for-editing?forum=sharepointgeneralprevious
// This fix stops form submit => blocks transfer to edit mode
var disableFormSubmitDueToBug = false;
var bugSubmitHandlerAttached = false;
$('*selector for inputs here*').keydown(function(e){
if(e.keyCode == 13 ) {
disableFormSubmitDueToBug = true;
bindBugSubmitHandler();
} else {
unbindBugSubmitHandler();
}).focusout(function(){
unbindBugSubmitHandler();
function bindBugSubmitHandler(){
$( "form" ).bind("submit", function( e ) {
if(disableFormSubmitDueToBug) {
e.preventDefault();
console.log('Blocked submit by SP bug handler');
bugSubmitHandlerAttached = true;
function unbindBugSubmitHandler(){
if(bugSubmitHandlerAttached){
$( "form" ).unbind("submit");
bugSubmitHandlerAttached = false;
console.log('SP bug submit handler unbind occurred');
</script>
Thank you SO much for writing this script. It worked for me.
Where the code says: $('*selector for inputs here*').keydown(function(e){
You need to replace *selector or inputs here* with the name of your input box, so for me it was:
$("input[name^='client_name']").keydown(function(e){ -
Strange behavior when "trying" to burn a disk.
At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8) -
Strange Behavior with gMSA in Server 2012 R2
Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
NickVIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
+ FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick -
My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Report FP_TEST_00 - Strange behavior
Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev 1
Time Type Nr Clt User TCode Grp N Text
11:37:20 DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
11092 Dispatcher K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text.......... Caller.... Reason/cal
dpxxdisp 1223 551 ADMIN 86 HUSVP-SAP-BA DpRTmPr NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type Grp N variable message data
21 254340 m Error (Function,Module,Row) Q0 4 551 ADMIN 86 HUSVP-SAP-BA DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev 1
Time Type Nr Clt User TCode Grp N Text
11:37:20 DP Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
11092 Dispatcher K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text Caller.... Reason/cal
nixxi.cp 4435 recv232 NiIRead recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type Grp N variable message data
21 254520 m Error (Function,Module,Row) Q0 I recv232 NiIReadrecv nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PMHello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando -
Strange behavior when trying to change backgrounds after Aperture install
Running 10.5.1 on my MacBook Pro without a hitch until today. Installed Aperture 1.5 and updated it to 1.5.6 last night and it too works fine.
However, today when I went to change my background image in System Preferences I encountered some strange voodoo. I originally under the Desktop applet in System Preferences I had the default images and folders supplied with the operating system, and one images folder I maintain under my Documents folder for my personal backgrounds.
Now I am no longer able to view my personal backgrounds folder in the System Preferences Desktop applet to select one of my images as a background. Instead I have, literally, two occurrences of the Aperture Projects folder listed under the default operating system background image options.
Initially I found I cannot discard either instance of the Aperture folder, nor can I re-add my personal images folder (states the folder is already in the list as an option). Naturally I figured something might be amiss with permissions. So I rebooted and ran the Disk Utility which checked my drive to find no pertinent errors. No change in symptom.
Next I renamed my personal images folder. This produced a change in symptom.
Now I only observed one occurrence of the Aperture Projects Folder in the System Preferences applet. However, when I went to add my newly renamed personal images folder the second occurrence of the Aperture Projects folder appeared and would not let me access anything therein.
Could certainly be a problem specific to 10.5.1, but thought it worth posting here in case anybody else wants to try to troubleshoot or has the same voodoo. Plus, the problem did not occur in 10.4.X running Aperture - so I think it is pretty specific to 10.5.1.
Not a show stopper, but certainly weird. Hopefully not indicative of any additional problems lurking under the covers.
TIA for any input or responses.it is a bug in leopard that we have uncovered ...
adding an iphoto library solves the issue ...
http://discussions.apple.com/thread.jspa?messageID=5847357� -
Strange behavior with Zoom and Image control
HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect? -
Strange behavior after using NIK plug-ins
Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
If I look at the processed picture then, I get a perfect presentation of the photo;
!http://users.skynet.be/fc419085/Aperture-1.jpg!
But when I press Z to zoom into a 100% preview I get this;
!http://users.skynet.be/fc419085/Aperture-2.jpg!
When I select the Loup in the normal view mode I get this;
!http://users.skynet.be/fc419085/Aperture-3.jpg!
This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
Does anybody know what's happening and if so, how to solve this problem?
Cheers,
IvanI did some testing and what I found is too weird to be true.
First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
Do you think Aperture developers are reading this forum?
Maybe you are looking for
-
Calculations in Xcelsius using data generated by a Web Service Connection
Hi, I have set up a web service connection to pull in 4 columns of data: 1. CATEGORY 2. SUBCATEGORY 3. PRODUCT TYPE 4.#OFCALLS. There will be anywhere from 1 to 500 rows of data depending on day of week and time of day. The web service sorts the
-
Hello, I am using Photoshop version 2014.2.2 (20141204.r.310x64) and Extension Manager version 7.3.2.39 running on a Windows 7 64-bit operating system with a Quadro K3000m graphics card and 16gb ram. I have a very peculiar problem which I am not able
-
HT201700 Voltage input range for original Macbook air 2008/2009
My charger (A1244 | 45w) no longer works. And I need to buy a new charger. Since this is for an old 2008 macbook air, the smart thing to do is buy a charger that will work with new models (that require 85w). Apple doesn't make this power tolerance sp
-
Problem showing correct data...
Post Author: Boon CA Forum: .NET I am having a problem with a few Crystal Reports that I canu2019t seem to track down. It is the same problem so I am sure that once I get one fixed then I can fix the same problem with the other. I am working with VB
-
I need help