Forum layout problem?

Is anyone else having problems with the forum layout? Mine suddenly changed a day or so back, and is missing tabs, and there is some text overlap (see encircled text in image).
I had DPReview go weird on me some months back, and strangely, when I asked on that forum, only other people in New Zealand were having the same problem. In fact it might have been people using the same ISP as me.

I was surprised they would take it offline during the day today, or even risk the upgrade yesterday, given that Photoshop CS6 is being released today.
I can't say I think it looks much worse, but I think it WORKS worse than its predecessor - primarily because of missing or broken features...
Who is a given response a reply to?
Where's the "Advanced Editor" link?
How many posts has a member made?
Why is the font different in the editor than when the message is posted?
Who thinks medium blue on medium gray is good?
Did stuff really need to be spaced out more?
Is it me or did the font get smaller?
-Noel

Similar Messages

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

CSS Layout Problem?

Can someone please help me with a layout problem.
As far as I can tell the page looks as it should in Netscape,
Firefox, etc., but IE6 and 7 refuse to work correctly.
The page I am working on is:
http://www.vmtampademo.com/localangler/testpage.html
Most of the picture caption and headline of the middle column
is behind the picture. I attempted to force the info with a
seperating div which seems to work sometimes. I doubt that this is
the correct solution. What am I doing wrong?
Thank you for the help!

It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

Layout problem in PDF conversion

Hi all,
i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
Thanks in advance,
Naveen

Hi All,
i am following the below approach to download the information from spool.
program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
FUNCTION /ngl/download_spoolinfo_as_pdf.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_SPOOL_REQUEST) LIKE TSP01-RQIDENT
*"     REFERENCE(I_FILENAME) LIKE RLGRAP-FILENAME
*" EXCEPTIONS
*"      DOWNLOAD_ERROR
TABLES tsp01.
DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
DATA: mstr_print_parms LIKE pri_params,
        mc_valid(1) TYPE c,
        mi_bytecount TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      copies                 = '1'
      cover_page             = space
      destination            = 'locl'
      expiration             = '1'
      immediately            = space
      mode                   = space
      new_list_id            = 'X'
      no_dialog              = 'X'
      user                   = sy-uname
      line_size              = 200
      line_count             = 65
     layout                 = 'X_65_200'
      layout                 = 'X_90_120'
      sap_cover_page         = 'X'
    IMPORTING
      out_parameters         = mstr_print_parms
      valid                  = mc_valid
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid              = i_spool_request
        no_dialog                = 'X'
        dst_device               = mstr_print_parms-pdest
      IMPORTING
        pdf_bytecount            = mi_bytecount
      TABLES
        pdf                      = mtab_pdf
      EXCEPTIONS
        err_no_abap_spooljob     = 1
        err_no_spooljob          = 2
        err_no_permission        = 3
        err_conv_not_possible    = 4
        err_bad_destdevice       = 5
        user_cancelled           = 6
        err_spoolerror           = 7
        err_temseerror           = 8
        err_btcjob_open_failed   = 9
        err_btcjob_submit_failed = 10
        err_btcjob_close_failed = 11
        OTHERS                   = 12.
    IF sy-subrc EQ 0.
      mc_filename = i_filename.
      DATA: lv_filename TYPE string.
      lv_filename = i_filename.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = mi_bytecount
          filename     = lv_filename
          filetype     = 'BIN'
        TABLES
          data_tab     = mtab_pdf
        EXCEPTIONS
          OTHERS       = 22.
      IF sy-subrc EQ 0.
        WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
      ELSE.
        WRITE:/ 'PROBLEM WITH DOWNLOAD'.
        RAISE download_error.
      ENDIF.
    ELSE.
      WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
      RAISE download_error.
    ENDIF.
ELSE.
    WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
    RAISE download_error.
ENDIF.
ENDFUNCTION.

Layout problem - multiple repeating frames

Hi, I have a layout problem, pls help!
Short report description:
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
- - - - .. other repeating frames ..
When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
For example:
Page 1:
Rep frame 2 - Record 1
Rep frame 2 - Record 2
Rep frame 2 - Record 3
Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
Page 2:
Rep frame 2 - Record 4
Rep frame 2 - Record 5
Rep frame 3 - Record 2
How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

Hi, thanks for helping me out!
I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Frame 4 - vertical elasticity expand
- - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Frame 5 - vertical elasticity expand
- - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
and so on..
Thanks again

Layout Problem in swings

I have an Layout problem. My Applications consists of a label and a panel in which some more labels are present.
The panel should contain the scrollbar in order to view all the label that excced the size of the panel.This label and a panel should be adjacent to each other.
My problem is, I am not getting the scroll bar to the panel when I am adding the label that excced the size of the panel, when I am adding the label adjacent to this label.

Did you use JScrollPanel? If not, use it.

[solved] layout problem in amarok 2.02

Hi,
Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
I uploaded a snapshot to illustrate the problem (it is the full screen!):
emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
Someone have the same problem ?
I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
Last edited by manouchk (2009-05-23 06:28:43)

Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200 or is there an hidden configuration file where I could tweek this?
Last edited by manouchk (2009-05-18 02:41:03)

Urgent: Layout problem in "light inner page"

Hi Experts,
I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
Can some one advise a solution for this.
-Lave

hi,
Similar problem in this thread. check it out
Desktop inner page lost
Regardss,
Ganesh N

Div layout problem

Hi - stuck on what I think should be a fairly basic layout problem:
I have 2 divs, equal widths but varying heights, one floated to the left and one to the right so that they appear next to eachother on the page. The one on the left contains varying amounts of text, the one on the right contains a flash player so never varies.
Where the text for the left div is long, I want it to start off next to the player, but then flow beneath it rather than continuing downwards at the same width as the div. If I remove the width of the left div, so that it reverts to the container width, the player div positions itself below it, so I can't work out how to get the effect.
Can anyone help?

Hi,
hope I understood in the right way: I used (translated from German DW) "modify table" and so I got one more row and two columns in your Main_Content. In one of the new columns I copied the image and beneath I took the text (you now can replace with image and text of your choice), like this:
If that's not a help for your question, please ask me again.
What concerns the width of the pictures, I would format them with PS or a similar program in the same wide.
Hans-G.

I'm confused by this new forum layout...

before the forum layout changed i could search within the photoshop forum for all the questions i had. now everytime i want to do a search i have to continually choose from that dropdown menu from the list of all the forums. the space to find the application you are looking for is tiny so its hard to find photoshop amongst all the others. is there a way of staying within the photoshop forum for multiple searches? i can't understand why they would change this basic function. chances are if you are in photoshop forum you want to search for issues in photoshop forum. am i missing a "search within photoshop forum" link somewhere??

I guess you missed the memo that this is an improvement.

Design/Layout Problem in OOTB SP "Docs I'm following" page

Hello
The "Docs I'm following" My Sites page in SP 2013 has the following layout problem:
Long document titles overlap with other elements (see also screenshot).
Note: This is default SP, i.e. we have not deployed any custom branding.
I guess this is a problem which can easily be corrected even without having to wait for a SP update. Since I'm not very good with design changes I would be grateful if you could provide
us with a quick fix, e.g. an updated css file.
Thanks a lot.
Best regards
John

Hi ,
For your issue, you can add the following code into your MySite MasterPage:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".ms-contentFollowing-itemTitle a").each(function(i){
$(this).text(shorten($(this).text(),32));
function shorten(text,maxLength) {
var ret = text;
if (ret.length > maxLength) {
ret = ret.substr(0,maxLength-3) + "...";
return ret;
</script>
Best Regards,
Eric
Eric Tao
TechNet Community Support

Printing layout problem with Lightroom CC 2015 Release

Hello,
I am working with the following configuration :
MacBook Pro (15-inch, Mid 2010)
OS X Yosemite Version 10.10.3
Adobe Photoshop Lightroom CC 2015 Release
EPSON Stylus Pro 3880
I tried to print two images on a Super A3 paper sheet with an EPSON Stylus Pro 3880 directly from Lightroom and here is an example of what I expected (I resized and added a black border for better visibility on the forum):
This is the preview I have in the printing module of Lightroom and this is also what I have when I print to a JPEG file with Lightroom.
Sadly, after I launched the printing job, this is what came out of the printer:
As we can see, the layout of the two pictures has been shifted toward the top of the paper sheet (cropping the top of the first image in the process) and about 30% of the right part of the layout has not been printed.
Do you have any idea of what I am doing wrong here?
For your information, I do not print very often so I am not 100% sure that I set everything correctly. However, I have been successfully printing in the past and it was with the same MacBook Pro on the same EPSON Stylus Pro 3880 printer but it was with OS X Yosemite Version 10.10.1 and with Lightroom 5.x (I cannot remember exactly which version).
Moreover, because my print was urgent, I retried with a Windows machine running Lightroom 4.x with the same printer and it was a success. So I doubt that my initial settings on my MacBook Pro were wrong although I am not 100% sure.

I am in France and I found out that EPSON is providing at least two different files for its v9.33 driver that relate to the Stylus Pro 3880 with OSX:
epson16738.dmg: US version (https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=141552&prodoid =63085147&infoType=Downloads&d…)
epson379436eu.dmg: French version (Support et téléchargements - Epson Stylus Pro 3880 - Epson)
and I realize that I was using the US driver which.
After few minutes of refection, I realized that the 3880 driver that I installed on my MacBook pro was the only piece that was present when my prints failed and absent when my prints succeeded. So I though it had found out the cause of my problems until I tried with the french driver (epson379436eu.dmg)...
In the meantime Adobe has release of new version of lightroom so let me recap my new configuration:
MacBook Pro (15-inch, Mid 2010)
OS X Yosemite Version 10.10.3
Adobe Photoshop Lightroom CC 2015.0.1 [ 1018573 ] (info available in Help menu > System info > Lightroom version)
EPSON Stylus Pro 3880
Epson driver v9.33 epson379436eu.dmg
... and the result of my test is ... nothing at all! Lightroom sends the the print job to the printer but nothing comes out of it.
However, when I printed to a file from lightroom and then tried to print this file with OS X Preview on the Epson 3880, it worked perfectly.
It also worked when I printed from Photoshop CC (2014.2.2).
It also worked when I printed from Lightroom but with a different printed and driver (Canon MF8580Cdw).
Therefore, among the five elements of my configuration cited above, there is none for which the printing job is always failing. It is hard to find out what is the faulty piece of software!

Layout problem with JTabbedPane

Hi,
I'm creating a JDialog with a JOptionPane in it which has a JTabbedPane as its ContentPane
Supposed to look like the pic below. I've put the JOptionPane into a JScrollPane in case the user makes the Dialog too small.
Problem is that the JTabbedPane stretches to a very large height (way bigger than the dialog height).
Using setPreferredSIze(..) on the JTabbedPane doesn't help either. If the dialog is made bigger, then the TAbbedPane doesn't stretch, if it is made smaller, the TabbedPane shrinks to the minimum necessary size.
Any ideas, tips on getting this layout would be appreciated.
|                                      |/\|
| ----- -----                         |--|
| |   | |   |                         | |
| ----------------------------------- | |
| |                                 | | |
| | 2 Tables and several buttons   | |__|
| | on this JTabbedPane using      | | |
| | GridBagLayout                  | |__|
| |                                 | | |
| ----------------------------------- | |
|                                      | |
|          | OK | | Cancel |           |--|
|                                      |\/|
-------------------------------------------

Check this: http://forum.java.sun.com/thread.jsp?forum=57&thread=293587
- ananth
Hi,
I'm creating a JDialog with a JOptionPane in it which
has a JTabbedPane as its ContentPane
Supposed to look like the pic below. I've put the
JOptionPane into a JScrollPane in case the user makes
the Dialog too small.
Problem is that the JTabbedPane stretches to a very
large height (way bigger than the dialog height).
Using setPreferredSIze(..) on the JTabbedPane doesn't
help either. If the dialog is made bigger, then the
TAbbedPane doesn't stretch, if it is made smaller, the
TabbedPane shrinks to the minimum necessary size.
Any ideas, tips on getting this layout would be
appreciated.
|                                      |/\|
| ----- -----                         |--|
| |   | |   |                         | |
| ----------------------------------- | |
| |                                 | | |
| | 2 Tables and several buttons   | |__|
| | on this JTabbedPane using      | | |
| | GridBagLayout                  | |__|
| |                                 | | |
| ----------------------------------- | |
|                                      | |
|          | OK | | Cancel |           |--|
|                                      |\/|

[E17] lock and keyboard layout problems when suspend

Hello,
I just installed E17 on my Dell Vostro laptop. The main problem I have is related to the suspend mode.
In settings > screen > screen lock, I enabled the option "lock on suspend" and the keyboard layout is selected to "be (default, basic)" (I have a belgian keyboard).
When I use the menu system > suspend, the screen is locked. But when I suspend my laptop by closing the lid (I see the power light indicator blinking on the side, so it's suspended) the screen is not locked when I open it.
Also related to the suspend mode. The layout is set to belgian (in the screen config as explained above but also in vconsole.conf and in /etc/X11/xorg.conf.d/10-keyboard.conf). When I put the luks decryption key or when E17 starts at boot, I have the right layout. However when I resume the laptop after being suspended, the layout is switched to qwerty (en_us I guess).
Any idea why ?
Thank you
PS: this problem is maybe more related to E17 than to Archlinux but I haven't found any forum about enlightenment. If you think I have better chances somewhere else, let me know.

I was having problems with E17 after a fresh install (mixer problem, key bindings, etc), and I fixed it by deleting the configuration files at
~/.e
as the wiki says.

Matrix-Report - Layout-Problem

Hi,
In my report (matrix-rep.) is number of column larger than side-width.
Report continue printing on the next page, but I want, the report should print this on the same page bellow
How can I do this?
Thanks
Gregor

Title of this Forum: Forms
Title of this Thread: Issue with Report Layout
I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
Reports has its own forum dedicated to questions related to...reports:
Reports
You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
good luck!
cheers

Forum layout problem?

Similar Messages

Maybe you are looking for