Forum Moderator Please help find my message

Dear Forum Moderator:
Yesterday (09.20.08) I placed in the FLASH General Discussion
forum a message about problems in using Flash in my User's account.
I do not remember the exact title but there were words: user,
account, counterproductive.
The message was authored by my screeen name Fonarik
I DID see this morning this my message, but after I signed
off and then back again I can NOT find it.
Please help to find it, as I hope to get help on my problems.
Thank you

Fonarik wrote:
> Urami:
>
> You are not correct in: "I only see one post by you,
this very post
> and nothing else ever posted from this nick name".
> Please look at my message above and to the LEFT. You
will see that I posted
> TWO messages: the one that disappeared (or was
deliberately taken away as NOT
> PLEASANT to Adobe) and this my asking for finding it.
>
> By the way please clarify what you mean by applying to
other spots - I do not
> understand.
>
> Thanks for attention
Not going to try to prove my point, just look at the obvious:
This is the NEWS READER screen, loading messages directly
from the Adobe News Server.
View forum by user name, only two posts, the first one "Forum
Moderator..." and
the reply to my post just now:
http://flashfugitive.com/stuff/sc_01.gif
My news reader has copies of posts for past 3 years.
Then by browsing Web Based Forum, searching for all the
threads by your user name:
http://flashfugitive.com/stuff/sc_02.gif
Just one... in past 90 days...
Don't believe in "shoosh" conspiracy theories. Adobe (and
previously Macromedia) never
suppress any posts. In fact they encourage posts dealing with
all kind of issues because
it helps the tech guys to learn about problems they could
over look during very compressed
and short testing period.
You simply post it incorrectly and it never made to the
forum. Just post once again
because no matter where you believe in, there simply isn't
any other, beside this one, posts
from you on the forum.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

NEW TO FORUM. PLEASE HELP.

I WORK WITH A MAGAZINE AND OUR GRAPHIC DESIGNER IS OUT OF TOWN. SO INSTEAD OF WAITING FOR HIM TO RETURN JULY 10TH, I AM TRYING TO DESIGN SOME PAGES MYSELF. I AM CURRENTLY WORKING WITH PHOTOSHOP CS3. MY QUESTION IS. I HAVE 3 COLUMS OF TEXT GOING DOWN ON THE PAGE LISTED BELOW. WHAT IS THE EASIEST WAY TO CUT AND PASTE THE TEXT INTO THE TEXT FRAMES. HOW CAN I MAKE 3 TEXT FRAMES AT ONCE, THEN CUT AND PASTE THE TEXT, SO THE WHOLE STORY GOES INTO THE TEXT FRAMES ALL AT ONCE? RIGHT NOW I MAKE 1 TEXT FRAME, CUT AND PASTE PART OF A STORY INTO EACH TEXT FRAME AT A TIME. ITS REALLY A PAIN. THANKS, FOR THE HELP.

I stand by my statement. I said…
please repost legibly or just stay off this forum.
So, if the OP (OP means Original Poster) is wiling to repost his request legibly, then all I did was politely ask them to. If not, then… they should leave because eventually good help will not be found. I expect that the OP will take the former option because I am an optimist and generally credit people with good intentions. I assume the ALL CAPS was a result of ignorance or inattention. Now the OP is informed and can contribute to the forum with clarity and respect.
I omitted one other piece of advice:
This forum is intended for help with Photoshop. A posting called “NEW TO FORUM. PLEASE HELP” does nothing to explain your problem. A more proper post is something like “CS3: need help using clone tool with layers”. This helps posters understand your general problem right away so we know whether to skip it (if one is not very familiar with the Clone tool) or read and respond (if someone else comes along who is familiar with the clone tool).
Telling us the version is vital, since features and commands change from version to version and we need to know what tools and commands are available. Finally, once your question is answered you can mark it as answered. Later, people coming to the forum with the same problem can search and find your post, see it has been answered, and solve the problem themselves without typing a post and waiting for a reply.
Please read this before posting again so you know how best to not only find the help you need, but let the help you need find you.
http://forums.adobe.com/thread/375816?tstart=0

Please help finding pre-exsisting methods

please help find pre-existing methods
JavaFirstTime Jan 2, 2005 3:21 PM
please help clever people :)
how to output decimals in 2 decimal places only?
how to output large integers using format: 12,376,452
I've been told there are pre-existing methods for that, but i just can't find it... ideally i need to know the source code...

Well, there's many ways to do it ... Here's one:
class NumberFormatDemo {
public static void main(String[] args) {
new NumberFormatDemo().go();
public void go() {
double decimal = 123.456;
System.out.println((int) decimal + "." + (int)
+ (int) (decimal * 100 + 0.5) % 100);
int largeInteger = 12376452;
System.out.println(recursive(largeInteger));
public String recursive(int largeInteger) {
if (largeInteger > 999) {
return recursive(largeInteger/1000) + ","
1000) + "," + largeInteger%1000;
} else {
return "" + largeInteger;
yes, that's exactly wot i need...
how didn't i think of that myself, using mathematics, i was thinking it would be more complicated like converting decimals to string then count letters and so on.
Thank you for putting me on the right track :)

I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

Hello, BaraaBa.
Thank you for visiting Apple Support Communities.
This sounds like your Apple ID has not yet been used with the iTunes Store. Here is an article that I would recommend going through when experiencing this issue.
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/HT2589
Cheers,
Jason H.

Please help find the program

Please help find the program to block unwanted number, call and SMS, that not all block number ,but the number on which you want to.

Which part of "The 5310 is just a java phone that cannot support applications like this." did you not understand?
If you want to achieve any form of blocking at all, it won't be with that phone. Your operator may be able to help by putting a block in place on their end, though, but I doubt it.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

HT5624 Please help find the IMEI number Please? My Iphone was stolen AIS network (Thailand)

Please help find the IMEI number
By email:
Please?
My Iphone was stolen
Call
AIS network
(Thailand)
thank you very much
<Personal Information Edited by Host>

http://support.apple.com/kb/HT1267
Regards.

Installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

Diana,
This could be a delay while internal service records were updated. Check it out again - is it okay for now?

To Cert Forum Moderator : Please advice what I can resume my CertView.

Hi Moderator ,
I'm so disappointed. Since this Thu, my certview account had rejected my login and requrie authorization verification agian !!
Ridiculous !!! Last time, certivew took more than 3 months to authorize my account and post OCM result to my cert history .
To Certification Forum Moderator : Cert Update from CertView so slow
Thist time, I can't help to annoy. How long I must be held this time !!!
Please give me some advices.

Certification Forum Moderator wrote:
Sean KTN,
I am glad your CertView issue is sorted out, could you please send a note to [email protected] anyway and let them know what happened, when it started and when it was resolved. Please give them as much info as possible, including your SSO info as well as your candidate ID. If there is a bug in CertView, we need to do a little research and get it sorted out. Please reference this thread in your email simply by stating that this is in reference to a thread on the OTN Forum that was refered to them earlier by Brandye Barrington and provide a link to the thread. This way, they will have some background info. It is often difficult to follow up on issues in the forum because we don't have all the candidate's info.
To the other candidate who was also having trouble with this issue. Please do the same.
Regarding the OPN Certified Specialist designation; unfortunately, this has been confusing from the beginning. There were also some issues with rules in CertView from the beginning. We hope that we have all the rules sorted out now. This would account for being "de-certified" on some of the OPN designations on some of your certifications. All certifications do not qualify for the OPN Certified Specialist designation - only certain, select certifications. You can find the qualifying list on our website here http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=342.
Regarding the OPN Certified Specialist certificates: in order to avoid too much more confusion, the decision was made to automatically send OPN Certified Specialist certificates only to candidates who obtain the qualifying certifications from December 1, 2009 (which is when the program was launched) forward. We will provide certificates upon request to candidates who had the OPN Certified Specialist added to certifications that were obtained before that date. What we wanted to avoid was randomly sending certificates to candidates who may not be aware of the program and adding confusion to a confusing situation. Please send an email to [email protected] and request to receive the OPN Certified Specialist certificates for your qualifying certifications. You may also want to confirm with the team your understanding of which certifications qualify so that you'll know what you are receiving.
We know that the roll out of this OPN program has been confusing and we hope to clear up the confusion more and more as we move forward. Thanks to all for your patience as we iron out the details!
Thanks,
Brandye Barrington
Certification Forum Moderator
Certification Program ManagerThat's fine. Brandye, I've submitted the note to [email protected] already.

Please Help! Error message: Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number.???

My old PC crashed and died, and I am unable to deactivate the licence of Photoshop Elements 7.
I re-installed Photoshop Elements 7 via a trial download from Adobe website onto my new PC, Windows 8.1 single language.
My serial number is not accepted.
Error message: 'Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number'.
Customer help care is not helpful and keep ending my chat before I get a solution.
Can someone please help me and let me know how I can rectify this problem!!!

Thank you Benjamin MItchley. I reviewed the chat log and I can confirm that they are correct we do not provide installation support for Photoshop Elements 7 due to the age of the software title. Photoshop Elements 7 also does not support activation so there is no risk that you were unable to deactivate the software on your previous computer.
I am showing the serial number under your account was provided from an equipment manufacturer. It is possible there may have been a customized installer for that version. Have you contacted the computer manufacturer to obtain the installation files for the copy of Photoshop Elements 7 included with your computer?
Since you did not migrate/transfer over any files it is unlikely there is a software issue preventing the installation. You can try running the CC Cleaner Tool to ensure that no corrupt licensing files may be preventing the installation process. You can find details of the use of the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

Please help with txt message issue

i am a prepaid client with no data on my plan so i have my data shut off on my iphone 4, so when i am not in wifi range and send a message to other iphone friends as a txt message (not Imessage). they are not recieving until i get back to wifi and then send as an imessage. Please help!!!!

Turn off iMessage on the phone.

Please help me regarding message error in GPShell 1.4.2

Hi friends..
i've a GPShell script like this :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
delete -AID a00000006203010c0101
delete -AID a00000006203010c01
delete -AID a00000006203010c0101
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
card_disconnect
release_contextI've got this message, when i tried to load .CAP file into Infineon Java Card 2.2.1, using that script..
C:\GPShell-1.4.2>GPShell helloInstall.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008205277E9B29D125200
Wrapped command --> 8050000008205277E9B29D125200
Response <-- 0000715457173C2A8FC1FF020005BD1A6BE9D3D5CA5B9E40FE02CCC89000
Command --> 8482010010D1F2701CAF9446D519A038D76716189C
Wrapped command --> 8482010010D1F2701CAF9446D519A038D76716189C
Response <-- 9000
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C01011D36CBB3988EDA8E00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c01
Command --> 80E400800B4F09A00000006203010C0100
Wrapped command --> 84E40080134F09A00000006203010C0177FE477BAC9DC31100
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C01014D90396A020CB8FE00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
file name HelloWorld.cap
Command --> 80E602001F09A00000006203010C0107A0000000030000000AEF08C60201A8C80201
F40000
Wrapped command --> 84E602002709A00000006203010C0107A0000000030000000AEF08C60201
A8C80201F4009F5FC8A422FC295C00
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)There's message error :
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
I've tried to use another Infineon Java Card 2.2.1, but the result is always same..
Please help me
Thanks in advance..

hi ,
ther is not syntax with clear with 'X".
but you can do one thing to get the one character.
REPORT ZMKTEST6.
data : f1(2) type c,
f2(2) type c,
f3(10) type n value '12345'.
clear: f1 with 'X', "Comment this
f1 = f1+0(1). "write this
f2 with f1,
f3 with '3'.
write :/ f1 ,f2, f3.
now f1 containd one charater instead of 2.
now you can display as usuall

Please Help! Error Message, Can't Uninstall or Open

I have itunes on a newer computer. It recently stopped opening and I get "This action is only valid for products that are currently installed." I get this SAME message when trying to uninstall itunes. I try and install a new version over it, same message. PLEASE HELP. I don't want to have to reformat my computer, but I'm feeling almost like it is the only way to do it.

Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install.

Please Help, Finder Icon got dragged on desktop accidently

I accidently dragged my Finder icon from the Dock to the desktop and I don't know how to put it back into Dock. So now my Finder icon from the Dock is on my desktop and it's always on top of any application. I don't know what to do. I hope I didn't break it or anything. Someone please help :'(
P.S. i posted this question in iBook section, before i posted here, sorry for any inconvenience, i don't know how to delete the other one.
iBook G4 Mac OS X (10.3.9)

Anna,
Welcome to Apple Discussions.
Find the com.apple.dock.plist file in your Macintosh HD/Users/yourusername/Library/Preferences folder, drag it to your Desktop, log out/in or restart and let us know what happens.
Your Dock should return to default appearance and the Finder should once again reside on the Dock.
;~)

PLEASE HELP FIND QOS

hello, i need help finding Quality of Service for my product. it is a WRT310N wireless router and im trying to make it better for me to play on xbox live. if you could help please try to give me a step by step tutorial because im not very good with computers.
THANKS YOU

To use the QOS feature of your Router... You need to login to the Router setup page... and then click on the tab "Application and Gaming" and then click on the sub tab "QOS" .. Once you are under QOS tab you can make the changes on it...

"Problem: Unable to play file type for...". Moderator please help

When using the spotlfy app from squeeze box I get this message every time: "Problem: Unable to play file type for" then list the song name. I can pick the music and see the art but no play. This is when I am attempting to stream from spotlfy on squeeze box. Logitech customer service told me spotlfy has not been running on squeezebox for weeks. Please help or I'll have to cancel subscription.

The 3rd party plug-in solved this problem for me, but only after I'd figured out a few other things, so I'm sharing them here: a) You have to have BOTH plug-ins running, both the v 1.0 "official Spotify plug-in " *and* the third party plug-in, which is on v2.3.8 as I write this. b) after you have activated the third party plug-in (and re-started the Squuezebox server) You have to open up the settings for the plug-in ( link in the far right colum) I don't think it matters how you choose to set these (I didn't mess with them.) The critical thing is that you must log into your Spotify account from within the this plug-in settings screen in order for the 3rd party plug-in to do its job. (And maybe you'll have to re-start the Squeezebox server yet again. I just do that without even thinking when trying to sort out these problems.) What makes this all challenging is that the symptoms change at each step: At first, with just the official plug-in activated, I got the "can't read file format" error message. After activating the 3rd party plug in (but before logging in from inside it) Spotify appeared to be working perfectly on the screen of my Squeezbox controller, indicating that a song was playing (even the bright white light that shows something is streaming was lit.) However. no sound was actually coming through. After I logged in as above, I finally got music to match all the on-screen indications. No logic to this that I can figure out. It just seems typical of life with Squeezebox.

Forum Moderator Please help find my message

Similar Messages

Maybe you are looking for