Forum not integrated with portal content

Hi All,
I like the new forum functionality in the NetWeaver Portal 2004s SPS 12.
But I expect the integration of the forum and the protal environment. But I cannot create links to files that still exist in the portal. I can only adding new files, where are they stored?
How can I create links on files and folders, that were stored in the portal. Without copy & paste access-ids, i think about a wizard which navigates me to files.
Bye and Thanks for helping me
Steve

Sorry all this was sent as a reply to the watch email... apparently SAP doesn't even use all of the functionality... also as stated... even documentation is being removed from what they originally released!
Agreed... this is a major integration for end users that is not there yet. The new products coming out seem to be because of the fact that it is used on SDN and SAP Can now claim that it is part of the "standard product" but as most of the other KMC technologies it probably wont get the dedicated development that is needed.
At this point I don't think there is a way to do that. I am more concerned with the fact that the NNTP portions of the forums don't work, the documentation is horrible, and there are tons of other things wrong!
Thanks
Trevor

Similar Messages

  • Project systems integration with portal (EP)

    Dear all,
    I have to integrate the projects systems module with Portal.(EP)
    In portal transactional I views can be used to create projects which can be store in the R/3.
    Now the issue is to create projects with out using Transactional I views. This should be a simple entry through portal, where in the user keys in the key fields and there by the project is created and scheduled.
    For this I have tried with using business packages given by SAP to integrate with portal.
    Now the issue is I can display the projects that are created in R/3 through portal and display the necessary fileds required for viewing (I views). Now the main problem is to create the project using these business packages so that the same get updated in the R/3.
    But business packages do not have the option of creating the project. I am using the business packages for projects 50.3.1
    Has any body come across this type of issue which has to be integrated with portal and subsequent creation of projects through portal
    If any body has done this in any other way please kindly share on this.
    Experts please throw some pointers on this.
    Regards.
    Vara Prasad

    Hi Aman,
    You may try creating transaction iViews of the desired PS Transaction.
    For more help you can take help of your Portal Administrator.
    Else, see if this link may help:
    http://help.sap.com/Business_Packages/EN/06/3ED93BE53BCD29E10000000A114084/frameset.htm
    Regards,
    Vivek Pandey

  • Language determination when WDA application is integrated with Portal

    Hi,
    How does the language determination work when WDA application is integrated with Portal?
    Thanks.
    Chitrali

    Hi,
    Please check out this link -
    http://help.sap.com/saphelp_nw04s/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
    Regards,
    Lekha.

  • Reg: BI integration with Portal

    Hi
    I am new to SAP BI and have a requirement  to integrate SAP BI with Portal.
    Any help in the form of documents or url will be of great help.
    --> Integration of BI with Portal
    --> Best practices for integration.
    --> What re the problems while integrating..
    Merely anything related to integration with portal will be of great help
    Thanks in Advance
    Cheers

    Hi,
    Please check the links below
    Check this URL for Step by step procedure:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
    Integration of BW Components into the Portal
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/37e1082163c54abce581a54d6b771a/frameset.htm
    Configuration for the Integration of SAP BW and SAP EP
    http://help.sap.com/saphelp_nw04/helpdata/en/2f/741a403233dd5fe10000000a155106/frameset.htm
    How to Integrate BW Web Applications into EP 5.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/af073962-0b01-0010-f7a4-f4c1023ed0a4
    Keys for Integrating SAP BW 3.5 and SAP Enterprise Portal 6.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7
    Enterprise Portal Integration into BW(e-class)
    https://media.sdn.sap.com/eclasses/ebw201/main.htm
    Regards,
    ®

  • BI integration with Portal - What & How

    Hello dear Gurus,
    I am very new to SAP BI Frontend and needed some help with workbook queries integration with portal.
    Let me explain you what i seek:
    1) What of SAP BI Frontend can be included in Portal (workbook, WAD,BEx analyzer or designer, AD-hoc)
    2) Do we have to create an Iview or does the EP guy creates one. Do i have to create seperate Iviews for seperate reports.
    3) If its a workbook that i need to weave in an IVIEW on the Portal , can someone provide me a step by step article, blog or forum.
    Any other information i may need -but i need it in detail.
    I wasnt able to find anything concrete all day yesterday and I write todayw ith reluctance. So please bear with me and point/lead me in the right direction.
    Points shall be assigned.
    Thanks,
    Zain

    Hi there everyone,
    I would really like some step by step detailed information. Please help me out all the gurus out there.
    thanks

  • How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

    How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
    I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
    I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
    Or can I? Does anyone have a solution I don't realize exists?
    Thanks,
    Sowelu

    AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
    Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs";  take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example.  An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

  • How to use PPM 5 (standalone or integrated with portal)

    Hi,
    I would like to know which advantages and disadvantages are presented by using PPM 5.0 standalone or integrated with portal? all functionality are the same in both cases? which is the best option?
    Thanks a lot,
    CAMILO URIBE

    Hi,
    from a functionality point of view, standalone and portal usage of SAP Portfolio and Project Management 5.0 are the same (except functionality which is in general only available within a portal, e.g. KM documents, collaboration rooms, etc.).
    From a TCO perspective, for the standalone usage you'll only need the ABAP stack (except for ADS), i.e. if you don't anyway already have a portal in use in your company, this could lead to a lower TCO.
    Kind regards,
       Florian

  • I am not getting the Portal Content inside the System Landscape

    Hi,
    I am not getting the Portal Content inside the System Administrations-> System Configuration->System Landscape. This is not visible. I am SAP NetWeaver 7.0.
    What could be the possible reasons?
    Regards
    Kaushik Banerjee

    Kaushik,
    do you have the full tree in Contentadmin? do you have no entry in the systemadmin? or is it just empty in the lower nodes? this would be normal, you don't see the content in systemadmin, just the defined systems.
    kr, achim

  • Outlook integration with portal

    Hi Experts,
    I am new to SAP and portal .Can any one give me steps to integrate outlook to portal(i want to access mails from portel)
    Regards,
    Rakesh.

    Hi,
    If You Wany See Mails in Portal .Follow the Procedure And Search The SDN.
    Create System Folders:
    This task creates the folders on the Portal to store the Exchange Transport system object.
    You may skip this step if the folders are already created. If not, log on to the Portal as Administrator and follow the below-mentioned procedure:
    Procedure
    1.In your portal, navigate to System Administration u2192 System Configuration  Portal Content.
    1.Right-click on the folder Portal Content, then choose New  Folder.
    2.In Folder Name, enter My Folder. Enter other details as shown in the screen below. Choose Finish.
    3.Right-click on the folder My Folder, then choose New  Folder.
    4.Name the folder System, then choose OK.
    5.You must next create the portal content folder for Exchange under the My Folder  System folder. Right-click on the System folder, then choose New  Folder.
    6.Name the folder Exchange, then choose OK.
    Result
    You have created folders to store Exchange system object.
    Create an Exchange System Object
    This activity defines SAP systems that will be connected to the Enterprise Portal and specifies the necessary attributes and web access details through System Landscape Wizard. When you run the System Landscape Wizard to create a system, the resulting object connects directly to the application that it defines.
    Procedure
    1.Go to System Administration  System Configuration
    SAP NetWeaver Portal System Administration  System Configuration
    2.From the Detailed Navigation iView of the navigation panel, choose System Landscape.
    3.Under the Portal Catalog, expand the folder Portal Content by choosing the drop list arrow on the left.
    4.Go to folder Best Practices  Systems  Exchange. Right-click on the Exchange folder and choose System (from PAR).
    This launches the System Landscape Wizard.
    5.Select com.sap.NetWeaver.coll.appl.gw.
    6.Choose Next.
    7.Select Microsoft_Exchange_Server.
    8.Choose Next.
    9.Make the entries for the system you want to connect to the Enterprise Portal. Then choose Next and then Finish.
    8. Select Open the object for editing radio button.
    9. Choose OK.
    10. Choose User Management from the Property Category drop list.
    11. Set your SAP system properties according to the details in the table below.
    12. Choose Save.
    13. In the Display drop list in the top right-hand side of the iView, select System Aliases for this system.
    14. In Alias, enter Exchange.
    15. Choose the Add button.
    16. Choose Save to save your changes.
    17. Choose Close.
    Result
    You have created a system to access a back-end application, and have included it in the portal system landscape.
    2.2.1 Set up the MSX-A Component
    2.2.1.1 Copy the SAP Exchange Transport Files for IIS
    1. Switch to Windows Explorer of the SAP NetWeaver Portal system.
    2. Locate a server that is on the same trusted domain as the Microsoft Exchange Server with Internet Information Server (IIS) installed.
    3. Copy the MSX-A Component files that came with the Exchange Transport and copy the files to the IIS server (that is C:\SAPExchangeTransport). The MSX-A components are found at <drive>:
    usr\sap\<SID>\<Instance>\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange
    (for example C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange).
    2.2.1.2 Register the SAP Exchange Connector DLL
    4. Double click SAPPXchTest.exe
    This launches SAP EP Test Exchange Transport Setup
    5. Choose Tools  DLL  Register
    2.2.1.3 Configure IIS
    6. Open the Internet Service Manager.
    Without Single Sign-On
    To create and configure an IIS Web Site without single sign-on, proceed as follows:
    1. Create a new Web site with the name SAPExchange and make a note of the port on which this site is running.
    2. Set the permissions to execute.
    3. Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport
    4. Open the properties dialog box for the new Web site, and choose the Directory security tab.
    5. Deselect all Authentication modes.
    6. Select Basic Authentication.
    7. Confirm with OK.
    With Single Sign-On
    To create and configure an IIS Web site with single sign-on, proceed as follows:
    1. Select the Web site where the SSO2KerbMap ISAPI module is installed and configured.
    2. Create a new virtual directory with the name SAPExchange beneath this Web site
    3. Set the permissions to Execute.
    4. Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport.
    5. Open the properties dialog box for the new Web site, and choose the Directory security tab.
    6. Deselect all Authentication modes.
    7. Select Integrated Windows Authentication.
    8. Confirm with OK.
    2.2.2 Create a Transport
    This activity creates a Microsoft Exchange transport. The resulting object connects the Enterprise Portal to Microsoft Exchange.
    Procedure
    1. Go to System Administration  System Configuration  Knowledge Management  Collaboration  Groupware Transports  Exchange Transport.
    2. From the Collaboration iView of the navigation panel, choose Exchange Transport.
    3. Choose New.
    4. Enter values for the Exchange Transport.
    Name :Must match the settings in IIS
    System alias:Must match the System Alias created in the previous step
    User logon domain:for example, sap.com
    Exchange Server:for example, exchange.sap.com
    Default exchange server:for example, exchange.sap.com
    IIS Server :sap.com (Use the settings from the MSX-A Component setup steps)
    Port:80
    5. Choose OK.
    Result
    You have created an Exchange transport to connect the SAP Enterprise Portal to Microsoft Exchange.
    3 User Mapping of Enterprise Portal to Microsoft Exchange
    Map the portal user to a user defined in the Microsoft Exchange server.
    1. From the top-level navigation, choose User Administration  Identity Management.
    2. In the field, enter the user name of the Portal user that you want to map, for example *test
    3. In the Get drop list, select User.
    4. Choose Go. A list of matching users will appear.
    5. Select the User from the list, for example *TESTUSER
    6. Choose the User Mapping tab from Details.
    7. Choose the Modify button.
    8. In System, use the drop list to select Exchange (the system alias).
    9. Enter parameters for the user, password, and mail server.
    10. Choose Save.
    System selection is not available if Testuser does not belong to the Administrators group.
    5 Sending Email through the Portal
    The sending of e-mails is integrated into SAP Enterprise Portal 7.0 using the SAP J2EE JavaMail implementation. This implementation can send e-mails using any SMTP protocol supported groupware server.
    Create Java Mail Transport
    Transport Checklist
    You have configured the SMTP server appropriately:If you want to allow users to send e-mails outside the company domain using the portal, this server must be configured to relay e-mails outside the domain
    The groupware server supports IMAP protocol:Optional. Messages sent from the portal can be stored on the groupware server only if the server supports IMAP protocol.
    If the groupware server does not support IMAP protocol, users cannot save copies of their messages in the Sent messages folder.
    All users have valid e-mail addresses in the portal LDAP:Every portal user must have a valid e-mail address. E-mail messages cannot be sent for users without an e-mail address.
    1. From the top-level navigation, choose System Administration  System Configuration  Collaboration  Groupware Transports  Mail Transport.
    2. Choose New, and enter the following values:
    SMTP server:Address of the SMTP server for sending e-mails.
    Sent messages folder:Optional parameter. Specify the folder on the server where the sent e-mail is to be stored(Sent Items on the Microsoft Exchange server or Sent on the Lotus Domino server. If this value is not specified, users are unable to save e-mails sent from the portal)
    System alias name:Alias that you defined for the groupware server in the system configuration. For more information, see the section on SAP Systems in the Connectivity Guide.(Exchange)
    3. Choose Apply.
    4. Choose OK.
    When you have finished creating your entries, restart the SAP J2EE engine.
    5.2 E-Mailing Service
    The e-mailing service provides the activation mechanism for sending e-mails.
    Procedure
    1. To configure the e-mailing service, choose from the configuration iView.
    SAP Enterprise Portal System Administration u00AE System Configuration u00AE Knowledge Management u00AE Content Management u00AE Global Services u00AE (Show Advanced Options)  Mailing Service
    2. Select Edit.
    3. Check Active checkbox.
    4. Select OK.
    If It's Useful Reward points
    Thanks
    SubbaRao

  • URL iView content translation not working using Portal Content Traslation

    Hi All,
    I am using Portal Content Translation to translate text of URL iView from English to Spanish. I am unable to do so. I have followed the below mentioned link:
    http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
    I have used Content Admin -> Portal Content Translation -> Translation Worlist Coordination to:
    1) Generate worklist and add content
    2) Generte translation data
    3) Release for translation
    After this, I am using Content Admin -> Portal Content Translation -> Worklist Translation for following:
    1) Load worklist for translation
    2) Translate worklist
    I am facing difficulty in Translate Worklist. The step by step method followed by me are as below:
    I am clicking on Content Admin -> Portal Content Translation -> Worklist Translation.
    I am searching Translation Worklist and selecting my Worklist
    After this I am selecting following
    Source Language - English
    Target Language - Spanish
    Then I am clicking on 'Load for Translation' button. New screen appears. In this screen, Translatable Text table is shown:
    It shows following
    Number
    Source Text <EN>
    Target Text <ES>
    Status
    Object ID
    In Status I can see 'Not Translated'. I click on Next for three times as there are three line Number (0, 1 & 2)
    The Status does not change. It remains 'Not Translated'.
    When I am using following combination
    Source Language - Raw Texts
    Target Language - Raw Texts.
    I click on Next for three times as there are three line Number (0, 1 & 2). The status changes to Translated.
    I do not know what is going wrong with my process while selecting Source Language - English & Target Language - Spanish .
    I have another question. I have to translate content of entire URL iView. How I can change the whole content of URL iView.
    In the source text I can NOT see the contents of URL iView.
    Thanks
    Stuart

    Hi Prakash,
    Did you check whether the translation has been done completely in PCD inspector? Some times you would have translated using Portal translation but it will not be written in the locale of the iView property.  Then we have to set it manually in the PCD inspector.
    Follow the procedure.
    1. navigate to System Administration -> Support -> Portal Content Directory -> PCD Inspector
    This will open the PCD inspector.
    2. "Browse Into" the iview where you have developed it.
    3. Click on the "All Props" for the iView which you need to translate.
    This will open the Properties in new window
    4. Check the property "com.sap.portal.pcm.title" what is maintained in Chinese? if it still displaying in English text against Chinese, Then you need to  Edit the property for chinese and have to give the actual chinese word.
    Note  : I hope you would have selected "Raw Text"  for Source language and "Chinese" as Target language. Pls confirm on this.
    Thanks,
    Mahendran B.

  • Internet exlorer 7.0 can not display crm portal content

    hi gurus,
    we are using crm5.0+ep7.0, we have loaded the portal content (business packages) for crm and crm high tech. the patch level is: 13 level 0 (BBPCRM is 6).
    I use portal role channel manager. when we want to display some crm content in portal which runs by explorer 7.0, sap will popup another window and turn into blank with error. the ie error says: object doesn't support this property or method. and the url:http://crmdev.iecsh.com:8000/sap(ZT1PQnhTbWh6Ym01Y0R3M0JqKnQ2R1VRLS10MDlLNjhsU1Z6XzdLTmUqc2RFUjFnLS0=)/bc/bsp/sap/crm_bsp_frame/mainDH.do
    while the original window is just continuing displaying the signal: loading.
    with ie 6.0, it's ok.
    can anyone help me out? thank you very mcuh.

    Microsoft Internet Explorer 7 as mentioned in SAP Note 981710 this version is not supported by any current NetWeaver Portal / WebAS / ITS / BSP / BEX / CRM Web Application Component......
    SAP Strongly recommend to our customers to block this update until this version
    This version (IE 7.0) "should be" supported as of SPS19 (NW '04) or SPS10(NW 2004s) and there exist several errors found in the operation on previous releases.
    be supported or the SPS be released (this is mentioned on the note), please note that once the system has performed the update there is not possible to go back to IE 6.0
    For further information please refer to:
    http://www.microsoft.com/technet/updatemanagement/windowsupdate/ie7announcement.mspx
    http://service.sap.com/sap/support/notes/981710

  • Why is the album art from our iTunesU site not downloading with the content?

    Recently, the album art from our iTunes U site has not been downloading with the content. We have tried downloading content from other pages and we get the album art, but when we download out own content the album art does not download with the files. The art appears in the iTunes store so there should not be a problem with the files.  Any idea why this is happening? Here is the link to the iTunes U page for your information.http://itunes.apple.com/gb/institution/university-of-london/id422825754

    Here is the link to the iTunes U page for your information. http://itunes.apple.com/gb/institution/university-of-london/id422825754

  • WLC not integrating with Radius Server

    Hello world,
    I have the following situation:
    One WLC 2000 Series (software version 7.0.230.0) with multiple SSID`s, one is with 802.1x integrated with a Radius Server.
    Everything worked fine until fiew days ago, when users were unable to logon via they`re certificates on Windows XP.
    The infrastracture didn`t suffer modifications.
    What i have checked: Radius certification isn`t expired, client certification isn`t expired, the password between controller and Radius is correct.
    There are no ACL`s between the WLC and the remote Server. I can ping the devices, other SSIDs on the same controller (wpa/psk) are working correct.
    The AP`s are 1242.
    I have tried deleting the SSID, configure it back. The OS on Windows Server is  2003 Standard. The AP`s are configured H-Reap.
    I have increased the Server Timeout from Radius Authentication Servers from 2 to 30 sec.
    The message logs recived on WLC Trap Logs:
    RADIUS server X.X.X.X:1812 failed to respond to request (ID 161) for client xx.xx.xx.xx.xx.xx/ user 'unknown'
    The message from the debug dot1x aaa enable:
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_CALLING_STATION_ID(31) index=1
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_CALLED_STATION_ID(30) index=2
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_PORT(5) index=3
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_INT_CISCO_AUDIT_SESSION_ID(7) index=4
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_IP_ADDRESS(4) index=5
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_IDENTIFIER(32) index=6
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_VAP_ID(1) index=7
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_SERVICE_TYPE(6) index=8
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_FRAMED_MTU(12) index=9
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_PORT_TYPE(61) index=10
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_EAP_MESSAGE(79) index=11
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_RAD_STATE(24) index=12
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_MESS_AUTH(80) index=13
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df AAA EAP Packet created request = 0x1cff348c.. !!!!
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Sending EAP Attribute (code=2, length=6, id=10) for mobile xx.xx.xx.xx.xx.xx.
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00000000: 02 0a 00 06 0d 00                                 ......
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df [BE-req] Sending auth request to 'RADIUS' (proto 0x140001)
    *radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df [BE-resp] AAA response 'Interim Response'
    *radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df [BE-resp] Returning AAA response
    *radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df AAA Message 'Interim Response' received for mobile xx.xx.xx.xx.xx.xx.
    *Dot1x_NW_MsgTask_7: Mar 06 09:37:07.329: 00:15:e9:33:75:df Skipping AVP (0/27) for mobile xx.xx.xx.xx.xx.xx.
    The messages on Windows 2003 Standard:
    User Y was denied access.
    Fully-Qualified-User-Name = xx.domain.com/Users_T/user
    NAS-IP-Address = X.X>X.X
    NAS-Identifier = Cisco_
    Called-Station-Identifier = ---------------------
    Calling-Station-Identifier = ---------------------
    Client-Friendly-Name = ---------------------
    Client-IP-Address = ---------------------
    NAS-Port-Type = Wireless - IEEE 802.11
    NAS-Port = 1
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Policy-Name = Wireless Policy
    Authentication-Type = EAP
    EAP-Type = Smart Card or other certificate
    Reason-Code = 262
    Reason = The supplied message is incomplete.  The signature was not verified.User Y was denied access.
    Fully-Qualified-User-Name = xx.domain.com/Users_T/user
    NAS-IP-Address = X.X>X.X
    NAS-Identifier = Cisco_
    Called-Station-Identifier = ---------------------
    Calling-Station-Identifier = ---------------------
    Client-Friendly-Name = ---------------------
    Client-IP-Address = ---------------------
    NAS-Port-Type = Wireless - IEEE 802.11
    NAS-Port = 1
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Policy-Name = Wireless Policy
    Authentication-Type = EAP
    EAP-Type = Smart Card or other certificate
    Reason-Code = 262
    Reason = The supplied message is incomplete.  The signature was not verified.
    Can anyone help why i cannot log the users via 802.1x ?

    Okay that is good..... this is what I would do next.  I would create a test ssid that uses PEAP MSchapv2 and create a new policy in IAS that is basic.  Allow 802.1x wireless and user group only and see if you can reconfigure one of the XP machines for PEAP.  Can you also post a screen shot of your polices (connection and network) so we can review it. 

  • Webdynpro ABAP application integration with portal

    Hi,
          Can someone provide me the complete documentation for
           1. webdynpro ABAP application development and
           2. webdynpro ABAP application  integration with enterprise  portal.
    Thanks...
    Kundan

    hi Kundan ,
    design pattern or paradigm followed by Webdynpro ABAP is
      MVC concept
               M-Model
               V- View
                C-Controller
    and cms with the advantages like Structuring the programming
         Creation of easily manageable application blocks
         Reusability of whole components
    for more documentation about WD ABAP , refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
    SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
    refer
    http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
    as well
    I hope it helps
    rgds,
    amit

  • Succession Planning 2.1 integration with portal

    In the installation guide for 2.1 Succession Planning, it mentions assigning users to one of the following portal roles after the portal content has been imported:
    Manager Self-Service - portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/
    com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service
    Talent Management Specialist - portal_content/com.sap.pct/specialist/com.sap.pct.erp.tms.bp_folder/com.
    sap.pct.erp.tms.roles/com.sap.pct.erp.tms.14.tms
    I just want to verify that both of the roles are not necessary, and only one will be sufficient.

    Hi Eric,
    Yes, you only need to assign one of these roles in the portal to the user. These roles are known to the Nakisa configurations, and allows the application to then provide additional content to the user according to the role they area assigned to.
    You can also configure other role names in Nakisa for the same roles, or create different sets of security through the admin, though you will have to provide the names of the roles to the application yourself.
    Hope that helps!

Maybe you are looking for