Forum space for testing

Would it be difficult to have a forum space for testing? There are new features and I would like to evaluate, for instance, replying by e-mail or creating documents. I prefer not to create a test message since it will appear in the Dashboard activity, and I would rather not want to experiment replying to someones thread.

moniquevdb-Oracle
There's at least 3 forums which may fall under that category. Not sure they are readable for non-mod users though.
[PRIVATE] Test 06/09/05
The specified item was not found.
The specified item was not found.
Nicolas.

Similar Messages

SAP Business One Forum news... - Pre-release of 2005A SP01 for testing

Pre-Release of SAP Business One 2005A SP01 available for SAP partners for testing purposes (only!):
April, 21st: Please note that the SAP Note No. 931019 about "Known issues" regarding SP01 has been updated and has been released.
Please checkout this article about changes, limitations, how to give feedback etc - published in the SAP Business One Developer Area here on SDN!
Here's the direct link to the article:
https://www.sdn.sap.com/irj/sdn/developerareas/businessone?rid=/webcontent/uuid/f3169a1c-0a01-0010-4ebd-abd65b029c71 [original link is broken]
FYI:
- Please note that the 2005A SP01 SDK package includes the SDK samples in C# as well!
- Please note that currently a survey regarding partner feedback on SAP Business One documentation is done in the "SAP Business One Forum" area on Channel Partner Solution Network:
http://cpsn-channel.sap.com/businessoneforum
TechSummit05 TechSummit05 TechSummit05 TechSummit05 TechSummit05
Presntations, Jam Sessions and more...
Go here:
TechSummit 2005 presentations
SDK (basic) E-learning available on SMP and as download package:
SDK (basic!) E-learning avail. on SAP Service Marketpl.(SMP) + as download
Good to remember or know as well:
There's a forum about the new "SAP Business One Integration ...":
Busines One Integration Technology (B1i) forum!!!!
...and (for SAP partners only) there's a forum where you can discuss implementation / sales / ... questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
The "Solution Overview" area in the SMB Portal on SAP Servicemarketplace now provides information on available documents in alphabetical order:
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000183&_SHORTKEY=01100035870000654575&_ADDINC=&
Here's a comprehensive post about the SDN "Rules of Engagement":
/thread/117232 [original link is broken]
Forum search tips:
Forum Search Tips
... and last but not least:
Don't forget to check the latest news in the SAP Business One Developer Area:
http://www.sdn.sap.com/irj/sdn/developerareas/businessone
Message was edited by: Frank Moebius

Hi Cristian,
As peter mentioned, Please refer to SDK Online Help=>Content=>Degeloper Guide=>DI Server
In addition, you can the sample code of DI Server here:
<<...
SAPSAP Business One SDKSamplesDI Server>>
As regard to php sample, sorry we don't such sample so far.
Per php, I recommend you to B1WS, a web service wrapper of DI Server for only those 45 services objects. You can download B1WS here: SDK Tools Download:
SAP Business One Tools [original link is broken]
=>SAP Business One Web Services Wrapper Tool
From technical perspective, DI Server is based DCOM technology, I am not sure it is natively supported php. So you may think about wrapping DI server as web server with ASP.net, just like B1WS. php<=>web server<=>DI server
Kind Regards, Yatsea

When will a Forum "Space" be Created for the DROID 4?

When will a Community Forum "Space" be created for the DROID 4? We are currently forced to post under either Android or the sub-section DROID / DROID 2, which is not working for us.
Thanks so much and kind regards,
ricemeli

Thanks for the response Ann. But respectfully, I -- and many other owners -- disagree. It causes much confusion and as a result many have posted their inquiries to the general Android Space or others. I have been experiencing several issues with my device lately, and when I first logged-in to the Verizon Community I spent an hour and a half searching for the DROID 4 Space, thinking that I was doing something wrong, searching in the wrong place, &c, &c. I have since read that many other DROID 4 owners have had that same experience before finally realizing that there IS no DROID 4 Space.
However, as you stated, the DROID 4 is somewhat similar to the DROID 2 (my previous two devices were DROID 2 GLOBALs) and as such in my opinion it would be a perfectly acceptable solution for the DROID 4 to be added to what is currently the DROID / DROID 2 Space if creation of a Space of its own is not deemed necessary by the Verizon Community Managers and Leaders. Doing so would provide much needed clarity for people in need of assistance to know exactly where to post their threads and requests for assistance sans all of the above confusion, and a far more positive Customer Service experience.
Thanks again and kind regards,
ricemeli

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Visual C++ Runtime Error R6016 not enough space for thread data

I get these errors on startup of my Windows 8.1 (with all latest updates installed) after login.
1. It would be helpful if the error message actually identified the exe or dll causing the problem.
Program: C:\Progra...
Is not a very helpful clue to the source of the error and because of its brevity comes across as being contemptuous of the user.
Image > https://plus.google.com/photos/116576618429528389782/albums/6004901461676803857
2. From the active apps Desktop toolbar it appears that this problem may be associated with
Apple IE DAV
3. I suspect that the problem announced by this error might also be contributing to the the fact that my Chrome browser now appears to be overlaid with a pink matt variation on its entire colour scheme. I have reported the pink matt error directly to Google
Chrome support.
Thanks
Martin

Hi,
Have you noticed any event in local event viewer related to this error?
Error reference:
C Run-Time Error R6016
http://social.technet.microsoft.com/Forums/en-US/13aa9b30-e00a-4ddc-9763-93702084bbea/visual-c-runtime-error-r6016-not-enough-space-for-thread-data?fo
Also, I suggest you to test the issue in clean boot mode to narrow down the issue.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear in clean boot mod, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check
half of the problematic half services.
Otherwise, please test the issue in Safe mode and let me know the results, then provide the screenshot of the error.
Kate Li
TechNet Community Support

Updating my .ipa in DPS App Builder for testing is not working

Hi there,
I've build my .ipa file in DPS App Builder for testing on my iPad before I publish it to the app store. No problem. I tested it and saw some modifications to make. I made the changes on my folio, updated it in the folio builder of indesign (on the cloud). Then I get back to DPS App Builder and rebuild an .ipa file from the "Manage" and "Modify" windows, it download and test my certifates, seems to work ok. Then I've created the new .ipa file (after erasing the old one on my desktop and iTunes) but when I synch it back on my iPad it's not updated. It's still the first version of my folio without the changes.
I tried to create a new app from the beginning but the single edition serial number does not work anymore. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I didn't find any answer in the step by step guide about that.
Or is it possible to delete completly the first version in DPS App Builder to recreate it without losing my single edition serial number as I didn't submit it to Apple yet?
Do I have something to do in the Folio Producer?
Thanks for your help.
Julien.

Single Edition Serial is one time use thus modification is not possible from your end directly in case you wish to use the same serial number. For such cases you need to contact DPS Support, who can get an approval on a serial number reset after reviewing the need.
In this case, I'll take this offline with you in reference to forum post # http://forums.adobe.com/message/5597607.

There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.   Time: 30/05/2014 1:16:20 AM

Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
When we click Retry, the server starts up OK.
There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
There is also free disk space available on the host and for the VM with the disk errors.
This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
- We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
- The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
- There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
- There are 6 CPUs
- There is 20GB of RAM (memory)
- The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
My question is this:
If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
How do we prevent this issue from happening if we don't know the underlying cause?
I would greatly appreciate any advice or suggestions.
If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
Thanks all,
Kurt

The type of storage is really based on your requirements, and your ability to withstand downtime.
iSCSI as you are using with a NAS such as Synology or QNAP. NAS Selector - Support - Synology - Network Attached Storage (NAS)
I wouldn't use iSCSI for Exchange or any database. It's a bit slow.
Do you have a single physical host? Then I'd probably to an external direct attached storage. This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
We used to use a HP P2000 (on old G1), but it's since been retired. Worked pretty well once firmware was upgraded. http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features. They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
Recommendations:
     Use RAID 6 with your large disk arrays. With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
     Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
     Use slower 7.2K disks in RAID6 for file storage.
We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300. It's extremely fast with about 50 virtual servers, but was quite an investment. One thing we don't have to worry about is down time. If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
Our VNX has 3 tiers of performance. 3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks. A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare. The third is a bunch of 7.2K 3TB disks in RAID6. The VNX autotiers, placing data on disks depending on where it's needed. The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it. I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
D

Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software

Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software

No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT

WhatsApp claims I have no storage on my phone to restore a backup while I have more than enough space for the backup size required. What do I do?

Hello community,
I used to have storage problems on my phone, and chose to delete WhatsApp since it consumed nearly a whole gigabyte on my phone. I thought that through deleting it and reinstalling, it would get rid of the overload of data and start fresh. However, once I got to the page to restore from a back-up of my messages, I didn't have enough space on my phone. So I did further research into how to free up some space (turned out I had a lot of deleted photos hiding in my phone which should've been totally gone) and managed to get nearly 500 MB free. So I went back to my WhatsApp app, and tried to restore the back-up since it says the size of the back-up is 360 MB. However, it still gives the following error message that it had given me before:
"Sorry, there isn't enough room on you iPhone to restore from your iCloud backup. Make room by deleting existing videos or photos and try again."
I didn't (and still don't) understand why it says there is no room on my phone even though I had about 450 MB free. I have tried switching my phone off and then back on. Still, I get the same message. I have also tried deleting WhatsApp again and re-installing it but still I get the same message, still when I have enough room on my phone. By now, I have already consumed my storage on other apps so I don't have much space left anyway, making the error message reasonable.
I would really appreciate if anyone could just throw me some possible solutions that could solve the problem of WhatsApp not recognizing that I've got enough space for it on my iPhone to restore all my messages. I would like them back because I have some important and nice message threads I would love to have retrieved. Remember, I have already tried switching my phone off and back on and also deleting WhatsApp when I had sufficient storage. Currently I don't have enough storage, which makes sense for the error message to appear, but if anyone gives me a possible solution I will make way for enough storage and try the solution.
Also a weird thing is that at first, I still got notifications of messages people sent me through private chat (so not group chat). I don't know what it exactly means, but hopefully that helps with finding a solution.
If you think that I might as well post this question on a WhatsApp forum, please tell me, because it does indeed seem like it lies on the app and not my phone.
Thank you all anyway for reading and wanting to help.
Shaynidw.

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Storage space for sub mail accounts

Does anyone know how I can allocate more storage space for my additional mail accounts? I ran out of space and purchased another 2gb of storage on my .mac account. However, none of this space is allocated to my additional mail accounts i.e. all of it goes into my main mail account (where I dont need it...). Any advice?

This forum is for discussing issues related to the Mail & Address Book applications included with Mac OS X 10.4 (Tiger). Yours appears to be a .Mac issue that has absolutely nothing to do with Mac OS X’s Mail. The right forum for such questions would be one of the .Mac Forums, such as .Mac General, for example.

Custom column to show total remaining storage space for a host

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

Could not allocate space for object temporary system object: ... in database 'tempdb' because the 'PRIMARY' filegroup is full.

Using SQL Server 2008 R2. Tempdb resides on disks W and X
both of those are 250 GB each. Nothing else resides on these disks. The recovery mode for tempdb is set to Simple and is split in 8 files and one log file. Each of the tempdb file is set for auto growth by 128 MB and max size is unlimited. The log file is
set for auto growth by 10% and max size unlimited.
I get the following error at least once a week while running an ETL:
[SQLSTATE 01003] (Message 8153) Could not allocate space for object '<temporary system object: 335532118192937>' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. [SQLSTATE 42000] (Error 50000). The step failed.
I have to then shrink the tempdb log and files to create space on the disks.
What is a permanent solution to this problem, I don't want my ETL to break due to TempDB diskspace full.
Thanks in advance.

Hi,
Permanent solution would be finding out query which is causing tempdb log file to grow out of proportion and fill it and I would like you to take help of below article
Troubleshooting out of space issue in Tempdb
Please change Autogrowth value for Log file from 10 % to may be 100 M. This is just a tentative value you need to study
growth of tempdb to reach to correct value. You kept 128 MB autogrowth for tempdb data file is this value tentative or you just put it.
Below article can be referred for tempdb details
Working with tempdb
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

HT1296 is there a way to NOT synch album artwork - I'd rather save the space for music...

is there a way to NOT synch album artwork - I'd rather save the space for music...I have an Ipod Nano 4GB (yes it's old)

This is the iPod Touch forum.
Note that the artwork associated with your albums is probably less than 1% of the size of your media files themselves.

FAQ: DPA - Remote Access for test systems

Welcome to DPA - Remote Access for test systems forum!
This forum is actively monitored and moderated by SAP Integration and Certification Center (ICC).
Frequently Asked Questions:
======================================
Q1: Where can I learn more about Developer Package Service (DPA)?
Q2: How can I apply for the regular DPA service?
Q3. How many SAP systems can I access under the regular DPA service?
Q4. How can I have access to a non-shared SAP system?
======================================
Q1: Where can I learn more about Developer Package Service (DPA)?
A: Please take a look at ICC's web page on SDN:
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/15330f73-0501-0010-d59e-8a32e220b2ed [original link is broken]
Q2: How can I apply for the regular DPA service?
A: Please go to http://www.sap.com/partners/apply and fill out the application form.
Q3. How many SAP systems can I access under the regular DPA service?
A: Up to 3 SAP systems, which are shared among all DPA users.
Q4. How can I have access to a non-shared SAP system?
A: Please go to http://www.sap.com/partners/apply and apply for the exclusive-use DPA service.
Message was edited by: Chung-Ho Fan

https://discussions.apple.com/thread/5294202?tstart=0
Something you should be aware of is the frequency of IP address change at your father's location. Providers of residential broadband services lease an IP address for a certain duration which you have no control over and is purely arbitrary. You may be familiar with these changes?
The point is sometimes these addresses change regularly (4 hours to every few days) and sometimes they stay the same for a longer period of time such as a year or more.
Because of the nature of this change you may find you can remote assist your father one day but not the next. The situation is easily rectified with a simple phonecall to your father. He can tell you what IP address he's using by launching his browser and clicking this link:
http://myipaddress.com
He gives you his new IP address and you should be able to make a successful connection again.
Be aware IP addresses handed out by ISPs are known as routable. IP addresses handed out by Firewalls/Routers/Gateway devices such as Apple's Airport Express Base Station etc are not routable. Assuming you've not changed anything in the devices they will always be one of these three ranges: 192.168.1.x; 10.x.x.x and 172.16.16.x. You don't use any of these last three group of addresses to make the connection over the public external (internet) network but you do use them when on the same private internal network.

"Your Mac OS X Startup Disk Has No More Space For Application Memory"

I've been having a problem in the last few days with my Mac. I would be surfing the net, or doing whatever, and an error message would randomly pop up on my screen. It would say: "_Your Mac OS X Startup Disk Has No More Space For Application Memory_". Then the dialog box would give me the option to PAUSE or *Force Quit* applications. But instead of letting me click these buttons, my Mac would just automatically freeze after the dialog box popped up!
The odd thing is, is that I truly was NOT using that much memory...much less than I usually do. Plus I have 4 GB of RAM, and I know I wasn't maxing it out.
Does anyone know why this error message would be popping up like this (especially since there was no way that I was using all my Application Memory)? And does anyone know why my Mac just freezes instantly when the error message pops up?
Any help would be GREATLY appreciated! It's quite hard use my Mac right now, since I never know when it's gonna freeze up on me!
Thanks!

I assume that means no backups? That's a problem you need to fix next.
You might be able to start your Mac in "Target Disk Mode" while connected to the other Mac. You do this by holding down the "T" key while booting. And I was wrong: you must use Firewire, not USB.
The other Mac will see your HD as an external F/W drive. You may have to "mount" it via Disk Utility, if it doesn't show up on the desktop and/or Finder sidebar.
You probably need to do a lot of examining what's not needed, and perhaps some maintenance, but you don't want to do that under pressure.
To get it running and buy just a bit of time, your best bet is to copy some big stuff (like video) either to the other Mac's hard drive or to one or more DVDs, then delete it from your HD.
Once you get several GB free, you should be able to boot it. Then get started cleaning it up. There are many threads in this forum with links and suggestions for how to do this. Just search for +Disk Full.+
Did this happen all of a sudden? If so, it's possible you had some sort of runaway or continually failing process, filling up some logs and/or caches. If you don't do routine maintenance, either by clearing your browser cache, etc., manually, or via an app like OnyX, that's another thing you might want to investigate.

Forum space for testing

Similar Messages

Maybe you are looking for