Forum Watches

Hello,
In the Forum FAQ there is the following information:
>After 30 days, inactive watches automatically expire.
How is this inactivity calculated?  I have watches expire even though, as a Moderator, I am reading emailed posts alomost daily.  Do I have to actually logon and visit the forum to register activity?
Yesterday, my watch to the NetWeaver Administrator Forum disappeared even though I had posted there within the last week.  Is this a bug?
Best Regards,
Matt

Hi Matt,
I checked the respective code of the task that checks for watches, and it seems to be correct and straight-forward with not much room for errors. However, you never know, maybe the watch objects didn't get updated correctly once there was a change in the underlying forum object (category, forum, thread, user). This would be quite hard to check after such an issue has happened, because the watch is being deleted without a trace
Furthermore we frequently check the SCN inbox for notifications which bounced back because the email address was wrong. We delete all watches for the users who have maintained this wrong email address in their SCN profile.
So to be honest I can only give you the advice to "save" important watches with the process outlined above.
Regards,
Michael

Similar Messages

  • How to stop Forum watches?

    I put one question into the forum which I have an answer to. I clicked "watch this thread" then "unclicked" it to stop emails from the forum. However I am now inundated with all thread emails.
    How do I stop this forum from sending me buckets of emails I don't want?

    Hi daiboy352,
    The same question you can find here:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53269&tstart=0
    I hope it helps! :)

  • How to stop the forum watch emails?

    How do i opt out of receiving e-mails from this forum as i no longer use it,Thanks

    Hi
    You can disable the “Watches” in your Forum Control Panel
    If you are logged to this forum then you should go to Control Panel (on the right side in the Welcome box).
    There you will find another box on the right.
    Here you will see option “Your Watches”.
    Here you have to disable the options:
    - Always watch threads I create
    - Always watch threads I replay

  • Forums watch options - reply subject of the mails

    Hi forums managers,
    when we opt to watch a forum via email,
    we are get the mails with the subject like:
    Forum "Exchange Infrastructure" update: "Security: MLS between XI IS and IE (ABAP Proxy System)"
    the above subject is perfectly alright.
    The subsequent replies of this message now has the subject like:
    Forum "Exchange Infrastructure" update: "Re: Security: MLS between XI IS and IE (ABAP Proxy System)"
    The suggestion is to change the format of the subject of the reply messages.
    the part "Re:" should be appended in the beginning of the subject. .. something like:
    Re: Forum "Exchange Infrastructure" update: "Security: MLS between XI IS and IE (ABAP Proxy System)"
    This will enable the email programs like outlook or gmail, when grouped by converstion, it will show all the mails of one thread together.
    It can improve the readers to see the question and reply, together at one glance.
    It would be great, if it can be done that way.
    would it be possible to implement this? or any remarks, suggestions are welcome.
    thanks,
    Ganesh (g22sep).

    I was not telling to append Re: tag for each reply.
    I was speaking about the location of the Re: tag, that is present in the subjects of reply emails.
    It should be at the beginning of the subject instead of somewhere in the middle of the subject.
    so the below subject
    Forum "Exchange Infrastructure" update: "Re: Security: MLS between XI IS and IE (ABAP Proxy System)"
    should be actually
    Re: Forum "Exchange Infrastructure" update: "Security: MLS between XI IS and IE (ABAP Proxy System)"

  • Oracle forum watch : please send mail with subject as the question

    Hi Site Administrator,
    The oracle forum send a mail if we are watching any topic. Earlier the subject was named as the question subject , which was very helpful.
    Now we are gettting the mail with subject as the topic name ex java programming, new to java etc.
    With the current form we have to see inside each mail to know what is the question asked. Earlier from the subject itself we were able to find what is/may be the question. Which has helped to easily and quickly scan through. So please change this new pattern to old pattern. Since that is the best practice.
    Hi moderator
    Please put my question in the suitable section if it is not placed in the right one.

    793619 wrote:
    Hi moderator
    Please put my question in the suitable section if it is not placed in the right one.Put it there yourself.
    Community Feedback (No Product Questions)
    The Java and Solaris moderators aka community moderators are not authorized to move content anywhere and everywhere on forums.oracle.com. In future, please check the forum listings and find the correct forum to post to.
    I'm locking this thread and it will be removed later.
    db

  • Forum watching and turning off email notification

    Community I need help. Since some recent update I am getting tons of emails on watched forums. Is there a way to watch a forum and turn off the email notification?
    I did a search but was not able to find any answer.
    Thanks for your kind help

    The issue has been discussed in Don`t want E-Mails Please have a look there.

  • Final forum updates

    Seeing as no-one has yet reported a single critical issue with new mods I am now at a point where I would like to put them to bed. However, before this happens I shall be adding the default post sort mod and the jabber ID mod.  I will NOT be adding the forum watch mod as this can now be accomplished by the RSS feed - a fact I have only recently realized.
    If anyone else has any final requests or suggestions I would like to hear them before I make the final changes and close this chapter of forum updates.
    Rest assured that I have seen and considered all previous requests and these have been judged on a basis of input vs output (i.e. is the effort worth the results), resource use and maintainability.  If your request has not been implemented already please don't suggest it again.

    Penguin wrote:not a critical issue and not an update request...the DEBUG MODE messages one user was having in changing their avatar I am now experiencing. Its not a dire need to upload avatars but perhaps there lies a more serious issue?
    The permissions on the dir are correct but I think some of the permissions on the files themselves are not - I cannot fix this and Judd must do it

  • Suggestion for improvements to forum search

    Hi,
    It would be useful if I could save search criteria under my profile as "Saved searches" - e.g. a search for "Universal Worklist or UWL in the last 7 days".
    It would also be great if I could save a set of search terms and get an RSS feed of the results.
    That would enable me to monitor forums for posts in my specific area of expertise.
    Cheers,
    Darren

    Just for the record, I second this suggestion. I'd rather have a 'search results' than the current 'Forum watch' notifications.  A new problem that has arisen with the plethora of new forums is that people get confused and tend to post stuff all over the place. I simply do not have the time to monitor more than one forum.
    e.g. there's a forum for WebAS Preview but half the people having problems with it are posting in "Trials, Previews and Code Samples". Are they wrong? No, but I still have two forums to look at if I want to participate. 
    My own area of expertise (workflow) tends to be scattered around ABAP, BPX, EP (and others) as well as "BPM and Workflow".
    Cheers,
    Mike

  • Unable to unwatch a forum

    I inadvertently clicked on the "Watch Forum" link in the SQL and PL/SQL forum and now I appear to have no way to undo that action.
    I know that there is a Your Watches link on my Control Panel page which hits the URL (http://forums.oracle.com/forums/editwatches!default.jspa). When I click that link, however, the page times out. I've tried a dozen or so times over the past hour, always with the same result. I suspect I may have a slightly abnormal volume of watches, so I'm guessing that this is not a general failure but a failure that is related to my account.
    Is there any chance that there is an admin interface that could disable this forum watch for me? Or a different page that I could hit that won't time out?
    Thanks,
    Justin

    Apparently, I was not only dense enough to inadvertently start watching the forum, I was dense enough to miss the fact that the same link became and "Unwatch forum" link, so I didn't have to go through the Control Panel at all. Total user error on my part.
    Justin

  • How to stop Forum emailing notification?

    please advise how i can unregister to forum website and stop receiving emails
    PLEASE

    Hello
    I assume you mean the Forum watches. Right?
    You can disable this notification mails in control panel of your user name. In forum you can see a box with your user name, e. g. Welcome, leanneg. Click on Your Control Panel > Your Watches.
    There you can disable it! :)

  • E-mail not working for Forums

    Hi,
    Not sure if this is the right forum for posting an issue that I am having. I have setup Forum watches for which I recieve e-mails. Since July 5th I have not recieved any e-mail. I have checked all the settings on SDN under control panel as well as settings on my e-mail and everything seems to be ok setting wise.
    Thanks,
    Naveed

    Hi Naveed,
    I already reported that to SCN Support Team as I am having the same problem, moreover I can't change wiki content anymore. Bad luck:(
    If I get any feedback I will provide you more information.
    Regards
    Marcin

  • Watch Frozen Online Free !Viooz! HD

    [url=http://sahilarora106.tumblr.com/]watch divergent online free[/url]
    [url=http://moviessahilsite.tumblr.com/]watch that awkward moment online free[/url]
    [url=http://moviesrhythm120.tumblr.com/]watch the other woman online free[/url]
    [url=http://moviesrhythm160.tumblr.com/]watch draft day online free[/url]
    [url=http://moviesrhythm170.tumblr.com/]watch brick mansions online free[/url]
    [url=http://spiderman2movies.tumblr.com/]watch the amazing spiderman 2 online free[/url]
    [url=http://moviesrio2.tumblr.com/]watch rio 2 online free[/url]
    [url=http://movieshauntedhouse2.tumblr.com/]watch a haunted house 2 online free[/url]
    [url=http://moviesfrozen.tumblr.com/]watch frozen online free[/url]
    [url=http://sahilarora106.comunidades.net/]watch the protector 2 online free[/url]
    [url=http://sahilarora10.comunidades.net/]watch the amazing spiderman 2 online free[/url]
    [url=http://sahilarora110.comunidades.net/]watch Divergent Online Free[/url]
    [url=http://sahilarora11.comunidades.net/]watch frozen online free[/url]
    [url=http://sahilarora125.comunidades.net/]watch the other woman online free[/url]
    [url=http://sahilarora129.comunidades.net/]watch that awkward moment online free[/url]
    [url=http://sahilarora128.comunidades.net/]watch heaven is for real online free[/url]
    [url=http://sahilarora786.comunidades.net/]watch Draft day Online free[/url]
    [url=http://sahilarora78.comunidades.net/]watch brick mansions online free[/url]
    [url=http://sahilarora780.comunidades.net/]watch rio 2 online free[/url]
    [url=http://sahilarora203.comunidades.net/]watch vampire academy online free[/url]
    [url=http://www.mbmswaves.com/forums/hdwatch-divergent-online-free-megashare]watch Divergent Online Free[/url]
    [url=http://www.mbmswaves.com/forums/watch-awkward-moment-online-free-hd-megashare]watch that awkward moment online free[/url]
    [url=http://www.mbmswaves.com/forums/watch-draft-day-amazing-movie-full-streaming-hd]watch Draft day Online free[/url]
    [url=http://www.mbmswaves.com/forums/watch-brick-mansions-online-free-megashare]watch brick mansions online free[/url]
    [url=http://www.mbmswaves.com/forums/watch-amazing-spiderman-2-online-free-hd]watch the amazing spiderman 2 online free[/url]
    [url=http://www.mbmswaves.com/forums/its-greatwatch-rio-2-online-free-hd]watch rio 2 online free[/url]
    [url=http://www.mbmswaves.com/forums/watch-haunted-house-2-online-free-megashare-2014]watch a haunted house 2 online free[/url]
    [url=http://www.mbmswaves.com/forums/watch-frozen-online-free-full-movie-hd]watch frozen online free[/url]

    [url=http://xcloudgame.com/forum.php?mod=viewthread&tid=116422&extra=]Watch captain america 2 online[/url]

  • Can't connect my P1102w printer to my wireless network (using Mac OS 10.6)

    I have a vanilla home wireless network (D-Link to a cable modem), and a MacMini running OS 10.6.8. My Mac laptop and 4th. Gen iPad work seamlessly. But my hours-long attempt to connect my new HP P1102w to the network has been totally frustrating, despite close study of the pdf documentation, the printer's self-test/Device configuration sheet, browsing this forum, watching a slew of YouTube/HP videos, and  following all manner of directions.
    The only consolation is the printer works fine on its USB connection. 
    Here are some issues I've encountered that have stopped me in my tracks:   
    Carefully following both the pdf instructions and HP's online how-to video, I get through Step 6 w/ no problemn. but then I go to Step 7, which says:
    " Under Communication Mode , click Infrastructure , select your network SSID from the Available Network Names (SSID) list, and then click the << button."
    Problem is there's nothing of the kind in that window. All I see is a status of the Wireless: enable or disabled (depending on a choice). And even if I try selecting Enabled, it switches right back to Disabled. Aside: I note the printed instructions show a copyright date of 2011. That's ancient history in the CPU world.  
    Other issues: The only IP address I can find for the printer is the IPv4 address, but that's only for Direct Print Configuration. Is that the IP address I'm looking for?
    The printer's hardward address, I assume, is its MAC ? Boy, I could sure use clearer use of language here. 
    So, needless to add, I'm stuck. It seems it should be THAT hard, but so far nothing I've been able to find on HP support or the forums seems to help. Thanks for any advice you can provide.
    PS. I'd hate to have to return this printer because I'm a two decade HP printer lover, but, alas, I may have to if I can't find a solution.
    Northwest John
    This question was solved.
    View Solution.

    Hi @Northwest-John, 
    I see by your post that you are unable to setup the printer on the wireless network. I can help you.
    Update the printer's firmware by the USB connection just to make sure that isn't causing any issues with the printer's Embedded Web Server (EWS) not allowing the proper changes. HP LaserJet P1102w Firmware Update Utility.
    The newest version is 20130703, which you can compare by printing the configuration page.
    Power cycle the router and restart the Mac.
    The printer won't recognize the network name if there usually is any symbols or spaces in the network name.
    Make sure Safari is set as the default browser. Sometimes the Embedded Web Server (EWS) won't open in other browsers. Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    (hold down the x button and when the printer makes a noise let go)
    Connect the USB cable from the printer to the Mac.
    Go to the Apple, system preferences, print and fax.
    Double click on the P1102w.
    Open the utility.
    Click printer setup.
    Click HTML config.
    This should open the Embedded Web Server for the printer.
    Click the Networking tab.
    Click Wireless from the list on the left.
    (Click Enable if you have this option)
    Under Communication Mode , click Infrastructure.
    Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
    From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
    Make sure you select either hexadecimal or alpha depending on your password. (very important)
    Apply the settings.
    In the confirmation box, (changes have been saved) click OK.
    You should get a solid blue light on the printer shortly.
    Then all we have to do is delete the USB driver and add the network driver.
    Click on the Apple.
    Click system preferences.
    Click the print and fax icon.
    Highlight the printer and click on the - sign to delete the printer. (USB driver)
    Disconnect the USB cable.
    Then click the + sign and select the printer from the list and click add. (P1102w bonjour)
    Test the printer.
    If you have any issues with the HTML config opening then do the following steps:
    Close any applications.
    On the Apple menu bar, click Go, computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
    Then delete the USB driver and add the network printer.
    Let me know if you are still having issues with filling out the EWS for the printer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • New to Logic 9, Questions about mixing with summing box.

    Hello - glad to be aboard. I just picked up Logic9 last week.. I have been on DP...well since it was P (I guess 20yrs,) Been contemplating the move for quite some time, but as I too, pay the bills with music, I've got to stay on DP until I and Logic are full integrated into my system. With that being said, I am DP by day- getting things done, and when the day is done, Its Logic time. I'm in the studio on forums, watching a bunch of videos that I bought, taking notes creating "Key Command" Flash cards - just kidding on that one) - I am really looking forward to making the switch. - I was going to order DP6, as well, but I think there's no need for that... this might be the right move.
    On to my question....
    My setup in the nutshell - Mac2.8. with MOTU PCIe,, using MOTU audio interfaces, 2x2408mkIII's, 1x24i/o, and 1x308) - I am using 2 x Rosetta 800''s as well, and from my DAW mix out through them into a Dangerous 2BUS summing box - which means - obviously, that I group my tracks in my daw and send out various outputs (i.e, Output 1-2 might be vox, 3-4 for gtrs, 5-6 for drums, etc.) - I then run to the 2Bus, out into a TK Audio BC1 buss compressor, routed back into the Apogee, and into the DAW - where I bring the stereo mix back in. - This means (2) things
    1. I have no need for a Master Fader
    2. I don't bounce
    There are a couple of things that are confusing me - It seems that in Logic, when i create a track, Logic is "kind enough" to think ahead for me, and not only gives me the audio track, but also another fader, I guess which acts like an overall channel strip or fader for that output. It also assigns a master fader for me as well. In DP, when i create an audio track - I get just that - an audio track. Its routing assignment is indicated by the inputs and outputs I select. If I want to route it out to inputs 1-2, then I choose that output - but nothing else pops up. If I had the need to assign a Master Fader - then I would key command to add a Master Fader. While, in the scheme of things its not that difficult to just "delete" these tracks - I am sure during the course of normal work flow, it will get old. I tried deleting the master fader (on a test project I was working on) and saving as a template. But when I opened up the template and started assigning audio tracks, the ol' master fader came back. To me, it seems like fader duplication that I really don't need to see. - I just want to see my audio tracks - and route them to their appropriate outputs from the channel strip.
    I assume the automatic assigning of a master fader - would be helpful if I wasnt mixing "outside" the box, and would be required if I "bounced" my final mixes down from within Logic. - And I also would assume that these Aux channels, or whatever that are assigned when i create audio tracks, are nothing more than overall "volume: controls for that output.
    Another annoying issue related to this - I have named all of my ins and outs withing the MOTU PCI interface - I then when into the I/O assignment page in Logic and requested that Logic use the names provided by the driver (my names) - it does.... In parenthesis after their's - but outputs 1-2 - keep reverting to the name "Stereo Out".... frustrating.
    Again - While I will miss alot of things from DP....I actually am seeing quite a few benefits over DP and the videos.. while not as useful as hands on work... are training me to see the screens, workflow, etc - and they are very helpful. When I do go into mess around - I am much farther ahead.. and at least know kind of where I am.
    But I'm really trying to minimize the impact of the switch.... so perhaps some of the long-time guys can asssit. I havent seen much on the various forums about diverting from logic's norm out into summing boxes....etc.
    Thanks very much - sorry about the long winded message - But I wanted to explain it the best I could.
    kj
    orcasound

    Hey Orcasound, welcome to the forum, and also welcome to Logic.
    Nice setup BTW, especially the Dangerous 2BUS into the BC1 coming back to the Rosetta 800"s, that gonna sound sweet mate.
    OK Q1: The master fader for output 1-2 is always gonna be there, I've never found a way of getting rid of it, you can fortunately set up the mixer so that it won't show though. At the top of the mix window is a heap of boxes highlighted in blue, all you need to do is deselect the master and the output as per this screen shot:
    Save this in your template and you'll never have to see those pesky faders again.
    Q2: Same thing really, logic will always show 1-2 output as stereo out. Which is annoying, even if you manually name them from the I/O labels window it's always stereo, everything else if fine apart from 1-2. To be honest I've just learned to live with it.
    Glad you made the switch, I find DP to be bloated and a bit tired nowadays.

  • How to install Premiere CC (not 2014) on a new machine?

    Just added a new machine to the studio, and am looking for a way to install Premiere Pro CC 7.2.x.
    The rest of the studio still hasn't upgraded to 2014 (and, no offence Adobe, but your track record means there's a few good months of forum-watching standing between me and a site-wide upgrade to a .0 product from you )
    This machine has a new license, but I've also tried swapping licenses with another suite so that this new computer is using a CC account from the 7.x era.
    I understand I'm supposed to be able to click on "More Information" in the Creative Cloud app, but that's not an option for me. Only "View Tutorials". Note that only the Premiere Pro CC 2014, and not Premiere Pro CC, appears in my Creative Cloud app, presumably because of the fresh install.
    Anyone know the proper workflow here or have a direct link?

    Hello
    Generally speaking you can install recovery image on every compatible HDD so thee should not be any problem about it.
    Please tell us what happen when you start recovery installation. Which error message is shown?
    Is new HDD recognized in BIOS. Before you start recovery installation set BIOS to default settings.

Maybe you are looking for