Forums down 6 - 8 hours from 7PM PST 25th January

This Announcement is shown in the Forum Comments forum:
Announcement: Forum Server Maintenance on January 25
The Adobe Community Forums will be offline for scheduled server maintenance on the evening of Friday, January 25 at 7pm pacific time. We expect the maintenance to take from 6 to 8 hours. The Forums will be completely off line during this time as the physical servers are relocated.
  by adobe-admin (22-Jan-2013)
That is six hours and a half from now.

You are welcome, Carlos.
I wish there were (a way to make) a forumwide announcement.

Similar Messages

  • How to find out why my MBP will always try to shut down after 1 hour

    Dear all,
    this is a question too complicated for me to answer; I have previously tried to solve this problem in a usenet forum (comp.sys.mac.system) - but we didn't get it solved there, and I finally gave up on it. However, it still persists, and it is so annoying that I want to try another approach on it this time using the Apple Discussions Forum.
    The problem is as follows: my relatively new (bought in december '09) MacBook Pro 13" (2.53 GHz Intel Core 2 Duo, 4 GB RAM) has a problem: always when I leave it untouched for one hour, something within the system would try to make the computer shut down (system halt). Please note right that this seems NOT to be a hardware-related issue (al least not simply a bad mother-board or sth. similar - there are a lot of threads about MacBooks that seem to shut down immediately, like fainting - this is not the case here). Instead, the system behaves like anytime when a user-requested shut down is invoked - for example, the running applications would check if any changes should be saved, and ask questions. The only thing is: I did not request a system shut down, and even more: I do not WANT the system to shut down. In fact, this whole problem is extremely annoying, since it constantly messes up my open documents (e.g. the TextMate workspace I usually set up, or similar things), forcing me to reestablish my workspace at least once a day. Over time, this can be very annoying for a computer that's used for work!!
    During the course of my earlier discussions in the forum, we tried to find out what makes the computer go down - looking through the system log files etc. - but to no avail: we couldn't trace back the event that has caused the system to invoke the shut down procedure. However, it seems that this issue is related to the Mac operating system, and not the hardware - and this is why I ask this question here (and not in the MacBook Pro section). It may be that we simply didn't look in the right place - or not with the right tools - and I hope that there may be some people here with some new ideas how to trace the reason for this procedure. Everything I can tell now with some certainty (and I couldn't do it before in the usenet forum) is that the shutdown seems to be invoked about one hour after the system has been left untouched by a user (no key strokes, no mouse movements); I know this because I use my Mac for a wake up call now - and, since I sometimes need more than an hour for that, I can tell that this problem causes iTunes to quit one hour after the Mac has booted (which makes my wake-up music to switch off... and some of the running applications with no changes to save).
    It would be very important for me to solve and remove this annoying problem, and I think that this really shouldn't happen! Needless to say, I haven't set the energy savings settings such that the system would shut down after one hour (in fact, I have set the system to always stay on when attached to a power supply); still, the problem prevails.
    Does anyone of You specialists have a good clue or smart suggestion where (or probably how) else to look to find out what causes the shutdown? Thanks a lot for taking the time and considering this annoying problem!
    Best,
    Björn

    Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
    What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
    Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
    Best,
    Björn

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • BGP4 Session Goes Down receiving FULL Routers from providers

    BGP4 Session Goes Down receiving FULL Routers from providers
    CONF
    router bgp 22999
    no synchronization
    bgp log-neighbor-changes
    bgp maxas-limit 254
    network 196.12.173.0
    aggregate-address 196.12.173.0 255.255.255.0 summary-only
    neighbor 64.247.171.17 remote-as 11992
    neighbor 64.247.171.17 version 4
    neighbor 64.247.171.17 soft-reconfiguration inbound
    neighbor 64.247.171.17 distribute-list ramallo_in in
    neighbor 64.247.171.17 distribute-list ramallo_out out
    neighbor 196.12.168.202 remote-as 11367
    neighbor 196.12.168.202 ebgp-multihop 2
    neighbor 196.12.168.202 version 4
    neighbor 196.12.168.202 next-hop-self
    neighbor 196.12.168.202 soft-reconfiguration inbound
    neighbor 196.12.168.202 distribute-list ramallo_out out
    SHOW VERSION
    Router# show ver
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, REL
    EASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Sun 18-Jul-10 03:32 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
    Router uptime is 1 week, 10 hours, 11 minutes
    System returned to ROM by power-on
    System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M3.bin"
    Last reload type: Normal Reload
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco CISCO2911/K9 (revision 1.0) with 483328K/40960K bytes of memory.
    Processor board ID FTX1445A1W4
    3 Gigabit Ethernet interfaces
    2 Serial interfaces
    DRAM configuration is 64 bits wide with parity enabled.
    255K bytes of non-volatile configuration memory.
    250880K bytes of ATA System CompactFlash 0 (Read/Write)
    SHOW LOG
    *Sep 21 21:58:09.107: %BGP-3-NOTIFICATION: sent to neighbor 196.12.168.202 3/1 (
    update malformed) 0 bytes
    *Sep 21 21:58:09.107: %BGP-4-MSGDUMP: unsupported or mal-formatted message recei
    ved from 196.12.168.202:
    FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 00BB 0200 0000 2440 0101 0040 0216 0205
    0000 2C67 0000 392E 0000 329C 0000 4BE5 0000 6D21 4003 04C4 0CA8 CA18 BE61 8B18
    BE61 9818 BE61 9118 BE61 8F18 BE61 8318 BE61 9F18 BE61 9718 BE61 9618 BE61 9918
    BE61 9E18 BE61 9C18 BE61 9B18 BE61 9D18 BE61 8C18 BE61 8118 BE61 9318 BE61 8E18
    BE61 9418 BE61 9518 BE61 9A18 BE61 8218 BE61 8D18 BE61 9218 BE61 8918 BE61 8618
    BE61 8518 BE61 8818 BE61 8A18 BE61 8718 BE61 8418 BE61 8018 BE61 90
    *Sep 21 21:58:09.107: %BGP-4-BGP_OUT_OF_MEMORY: BGP resetting because of memory
    exhaustion.
    *Sep 21 21:58:19.895: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Down No memory
    *Sep 21 21:58:19.895: %BGP_SESSION-5-ADJCHANGE: neighbor 64.247.171.17 IPv4 Unic
    ast topology base removed from session  No memory
    *Sep 21 21:58:19.895: %BGP_SESSION-5-ADJCHANGE: neighbor 196.12.168.202 IPv4 Uni
    cast topology base removed from session  BGP Notification sent
    *Sep 21 21:58:28.707: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Up
    *Sep 21 21:58:31.267: %BGP-5-ADJCHANGE: neighbor 196.12.168.202 Up
    *Sep 21 21:58:35.607: %SYS-5-CONFIG_I: Configured from console by vty0 (196.12.1
    73.25)
    *Sep 21 22:02:35.387: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed
    from 0x2342E9A8, alignment 0
    Pool: Processor  Free: 125144  Cause: Memory fragmentation
    Alternate Pool: None  Free: 0  Cause: No Alternate pool
    -Process= "BGP Router", ipl= 0, pid= 239,  -Traceback= 0x2340604Cz 0x23423490z
    0x21AF2D38z 0x21AA5C80z 0x21AA5FB0z 0x21B63554z 0x21B63E58z 0x21AC7844z 0x21AC7D
    04z 0x21AC83A8z
    *Sep 21 22:02:35.387: %BGP-5-ADJCHANGE: neighbor 196.12.168.202 Down BGP Notific
    ation sent
    *Sep 21 22:02:35.387: %BGP-3-NOTIFICATION: sent to neighbor 196.12.168.202 3/1 (
    update malformed) 0 bytes
    *Sep 21 22:02:35.387: %BGP-4-MSGDUMP: unsupported or mal-formatted message recei
    ved from 196.12.168.202:
    FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 0061 0200 0000 3240 0101 0040 0216 0205
    0000 2C67 0000 392E 0000 329C 0000 6D52 0000 1B89 4003 04C4 0CA8 CA40 0600 C007
    0800 001B 89C8 3BC4 C618 C83D 1018 C83D 1A18 C83B 3C18 C829 D618 BA00 D417 BA00
    D0
    *Sep 21 22:02:35.387: %BGP-4-BGP_OUT_OF_MEMORY: BGP resetting because of memory
    exhaustion.
    *Sep 21 22:02:46.379: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Down No memory
    *Sep 21 22:02:46.379: %BGP_SESSION-5-ADJCHANGE: neighbor 64.247.171.17 IPv4 Unic
    ast topology base removed from session  No memory
    *Sep 21 22:02:46.379: %BGP_SESSION-5-ADJCHANGE: neighbor 196.12.168.202 IPv4 Uni
    cast topology base removed from session  BGP Notification sent
    *Sep 21 22:03:00.319: %BGP-5-ADJCHANGE: neighbor 196.12.168.202 Up
    *Sep 21 22:03:01.347: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Up
    Router#
    Any ideas?

    I have  CISCO ASR 1002-X with 4 GB Memory. i have the same problem
    BGP Session goes down.
    here is the log
    *Feb 25 06:03:06.571: %BGP-4-BGP_OUT_OF_MEMORY: BGP resetting because of memory exhaustion.
    *Feb 25 06:03:07.968: %COMMON_FIB-4-DISABLING: IPv4 CEF is being disabled due to a fatal error.
    *Feb 25 06:03:10.107: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down No memory
    *Feb 25 06:03:10.107: %BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base removed from session  No memory
    *Feb 25 06:03:10.107: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down No memory
    *Feb 25 06:03:10.107: %BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base removed from session  No memory
    *Feb 25 06:03:10.107: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down No memory
    *Feb 25 06:03:10.107: %BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base removed from session  No memory
    *Feb 25 06:04:22.732: %FIB-2-FIBDOWN: CEF has been disabled due to a low memory condition. It can be re-enabled by configuring "ip cef [distributed]"

  • Transfer of hours from CATS to HR

    Hi.
    One of my customers has set up a transferral of hours from CATS to HR (IT2001 and IT2002) with help of trx CATA.
    The process includes approval of hours via CATS_APPR_LITE which slows everything down considerable. In the time gap between recording of hours, and approval of hours, WBS-elements are closed. This causes error messages in program RCATSTAL (trx CATA).
    Does any of you have any suggestions of how to make the process smoother?
    I've been thinking of direct transfer to HR - either from CATS or from CATS_APPR_LITE. If the direct transfer is triggered from CATS, how can the hours then be approved?
    Thank you in advance!
    Odd

    Hi,
    You can do one thing than. Use SAP standard task for approval process.
    For more details refer the below links:-
    1. http://help.sap.com/erp2005_ehp_05/helpdata/EN/64/4003fb470211d189720000e8322d00/content.htm
    2. http://help.sap.com/erp2005_ehp_05/helpdata/EN/3e/697b423737dc54e10000000a155106/content.htm
    Thanks & Regards, Swapnil Mishra
    Hi again, Swapnil.
    Thank you for your effort in helping me solve this. One way of speeding up the approval process would be to transfer given A/A codes without approval, and only have some A/A-codes through the apporval process.
    As I can see from your refered links, hours HAS to be approved (status 30) before they can be transfered to HR.

  • Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

    When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My battery lifetime at my MacBook Pro Mid 2009 is down after 1 hour!

    Mac Book Pro Mid 2009, running with Mountain Lion is down after 1 hour! I already replaced it with a new one, but same problem. There is also a warning to control the battery. SMC and PRAM reset done. Nothing helps. From time to time, the remaining time jumps from almost clear (20%) up tu 80%! And the process to calculate this time needs much time. Can anybody help me? Cheers

    I don't recommend you to restore a Time Machine backup because the same problem will appear if there's a software issue. First, install Mountain Lion without restoring the backup and check that the battery works correctly

  • MBP randomly shuts down every few hours (while plugged in)

    MacBook Pro 15" Unibody Mid 2009
    3.66 GHz Intel Core 2 Duo
    Battery has been shoddy for a few years now. Only lasts about 15-30 minutes, but I just use the power cord.
    Recently, the MBP (with cord plugged in) has been randomly shutting down every few hours. Immediately prior to shutting down, the status bar says the battery is fully charged, and I can unplug the cord, and there are no issues. When restart the computer, the battery will now say it's anywhere from 0-60% full.
    The fact that the MBP shuts down even with the cord leads me to believe it's a logic board issue. If that's the case, what's the best option?
    I figure I can either:
    1. Replace just the battery and assume the healthy battery will weather any logic board lapses
    2. Replace both the battery and the logic board
    My local Apple Store said they could replace the logic board and battery for $300 total.
    Is this necessary, and if so, is it worth buying the parts and trying to replace myself?

    Yes, it's the flat-rate depot repair.
    Ok, you've (mostly) answered my primary concern... I was wondering what would happen if it turns out this isn't a logic board issue, and if my $310 would go to waste. The thing is that, right now, my MBP appears to be working perfectly fine until it randomly shuts off, which can take a few hours. So, if the depot replaces the logic board + battery, the MBP appears to be working there (I can't imagine they'll test it for more than 5 minutes), the depot sends it back, and after hours of use, I still have the same issue, I'll be able to get a refund, yes?
    If so, I'll probably just opt for this deal since replacement parts on eBay appear to be about the same price.
    Thanks for the help!

  • HT1665 why can't i down load my music from my laptop to my iphone.It is on my ipad.It does not sync.

    why can't I down load my tunes from my laptop. The downloaded from my laptop to my ipad but will not syc to my iphone 4.

    Tell us what you're doing when you connect your iPhone to your computer and open iTunes (BTW, this is the iPad forum, not iPhone forum).

  • I have downloaded five hours of video of my band playing and have edited it down to two hours but I can't fast forward it or jump to the next song. what do I need to do. Also is there anyway to eq the sound before making a dvd

    I have edited five hours of my band playing and after burning a dvd it won't fast forward or go to the next song. what do I need to do. Also is there a way to add eq to the video before I burn it. (the bass is weak)

    Hi Steve,
    The following suggestions assume you are using iMovie '11 (but are also mostly applicable to iMovie '09 from memory - but not sure about the Equalizer).
    You mentioned in the topic header that you had edited the project down to 2 hours. In iDVD that is the maximum time allowed for a standard single layer DVD, including time taken for the theme and menus. Perhaps things are a bit tight, and you may need to shorten the project by a few minutes before exporting again for iDVD.
    Note that for the Best Performance setting the maximum duration is 1 hour. For 2 hours duration you need to use either High Quality or Professional Quality (the latter takes about twice as long to encode, as it does a 2 pass operation).
    In your iMovie project did you insert chapter markers for the beginning of each song? If so, don't place them within a transition. Also, don't insert a marker at the very beginning of the project - iDVD will do this for you automatically - all you need to do in iDVD is rename it. In case you aren't familiar with the markers, see this picture (just drag the marker onto the clip where you want the chapter to start, then give it a name in the marker box that appears):
    Regarding the Equalizer, in the iMovie project, double-click on the audio track to bring up the Inspector. Select Audio - you will see an Equalizer item. Use the Custom setting, or by clicking on the disclosure triangles (little arrow heads), you can choose from a range of presets. See this picture:
    Hope this helps!
    John
    Message was edited by: John Cogdell

  • I can no longer organize my drop down book mark list ,from the toolbar in alphabetical order like I used to Why ?

    Used to, I could organize my drop down book mark list from the tool bar, in alphabetical order from A-Z by clicking on view, sort by, select . Now every time I add a new bookmark it goes to the bottom of my bookmark list in Unsorted bookmarks . I can go to the bookmarks and sort the menu in Alpha. order. However, when I go back and drop down the bookmark list from the tool bar, the new bookmarks are still in the Unsorted list at the bottom. The bookmark's menu may or not have them in assorted list. This occurred several updates back. Why can I no longer sort the drop down book marks list in A-Z alph. order? This is a major obstacle when trying to search for a particular bookmark that I have made in the not too distant past.

    That did solve my problem. Madperson Thank You Very Much!!!!! I'm not real literate on the mechanics of working computers even though I use them all the time. Basically I'm a point & click kinda guy and beyond that I'm pure novice! This is going to save me a lot of wasted time.
    Allen C. Geiser
    ageiser34

  • Initial down load of objects from R/3 to CRM

    Hi Experts,
    We are facing problem while we are doing initial download for the objects from R/3 to CRM. 1st 5 objects showing running(yellow) remaining all are showing waiting(red) in R3AM1.We maintained all the settings. Let me know anything we missed in this please!
    Please provide Middleware settings for down load the objects from R/3 to CRM.
    Thanks in Advance
    RAMESH

    Hi Rajesh,
    Please check for those running objects whether there are any "Parent Objects". You open that adapter object which is in "Running" state and there is a tab called "parent objects". Please check whether there are any objects present there. If there are objects present there then those needs to be run first before running the current object.
    Regarding the objects in "waiting" state the reason is because the parameter MAX_PARALLEL_PROCESSES in the table SMOFPARSFA is set to a small value I believe.Increase the value to 99 and then again try the loading of objects.
    This parameter MAX_PARALLEL_PROCESSES  indicates the total number of loads that can be done at a time.
    Thanks
    Abishek

  • How can i schedule concurrent program for every one hour from back end

    Hi ,
    I want to schedule concurrent program for every one hour from back end .
    Example
    1) xyz is the concurrent program that should run for every one hour with a parameter 111 and the SAME concurrent program that
    should run every 2 hours with a different parameter like 222.
    I mean Conc prog should run for different parametrs with a different scheduling..
    Please guide me to solve the issue.
    Thanks in advance...
    Regards
    Narender B

    Hi ,
    I have used following code for scheduling the concurrent program from backend.
    declare
    l_request_id NUMBER;
    l_return_code boolean := FALSE;
    BEGIN
    fnd_global.apps_initialize(62991,54477,20003);
    l_return_code := FND_REQUEST.SET_OPTIONS ('YES');
    l_return_code :=fnd_request.set_repeat_options('16:36:00','','DAYS','START','','Y');
    l_request_id:=fnd_request.submit_request(application => 'xbol',
    program => 'NAPP_START_GENERATE_CHART_DATA',
    description => 'Processing chart ',
    start_time => SYSDATE,
    sub_request => FALSE,
    argument1 =>4000130957231588,
    argument2 => null
    COMMIT;
    dbms_output.put_line('Program has been submited and request id is '||l_request_id);
    END;
    Here the issue was concurrent program is completing with a warning like
    Resubmission of request 75588551 has been cancelled.
    FND_RESUB_PRIVATE.PROCESS_INCREMENT EXCEPTION: ORA-01403: no data found
    Resubmission of request 75588551 has been cancelled.
    FND_RESUB_PRIVATE.PROCESS_INCREMENT EXCEPTION: ORA-01403: no data found
    so i could not find the solution for this issue,please anybody guide me to solve this issue.
    Regards
    Narender B

  • HT201272 I am trying to down load a movie from Itunes on my ipad but as the download is complete an error msg appears stating download error. I've tried downloading 4 times and the same message. What could be wrong?

    I am trying to down load a movie from Itunes on my ipad but as the download is complete an error msg appears stating download error. I've tried downloading 4 times and the same message. What could be wrong?

    Hello VernonMartin,
    Thanks for the question, and welcome to Apple Support Communities.
    If the error includes a specific code, you can cross reference with these articles:
    iTunes: Possible iTunes Store errors
    http://support.apple.com/kb/ts1424
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • I have never set a firmware password on my macbook pro, but when I hold down option to boot from a different drive, I get a lock, and have no idea what the password is..?

    I have never set a firmware password on mymacbook pro, but when I hold down option to boot from a different drive, I geta lock, and have no idea what the password is, i am the first owner of my mac so its impossible that someone else has set the password, i have only noticed this becuae i made a bootcamp partition and installed windows onto the machine, after the installation... i shut down the comptuer and continued to use os x, days later i tried to boot into the boot camp partition again by holding down the option key on boot, but i got a window asking me for a firmware password that i have no idea of! please help me!
    will

    Hi macbookprowilliam, I have the SAME problem, that grey lock just appeared trolling me. I dunno the password and I wan't to sell this macbook! I need the password. Maybe it's a new malware! I don't even know how to set a firmware password and I am the only user on this computer too! I have a thread about that too: https://discussions.apple.com/thread/3926399?start=0&tstart=0
    So, did you fix it or got around it? Please reply! I am desperate.
    Thank you

Maybe you are looking for