Forums installation and missing roles

hello,
i've installed a portal with and users are from ABAP Source.
then i've added forums application.
all is fine, i've created my iviews from template.
the problem i'm facing is concerning the forum iview for assigning an initial forums system administrator.
the documentation say that this iviews must be assigned to a role with at leat one user with the following roles :
JiveAdminDefinitionRole
Administrators
but these roles doesn't exists in my portal!
my portal administrator has role SAP_J2EE_ADMIN, that's all
how to create those missing roles?
thanks in advance
best regards

Hi Olivier Ziller,
Appreciate if you can share your findings on the "missing of JiveAdminDefinitionRole" . Can you give me step by step solution.
Thank you.
Regards,
Naimah

Similar Messages

  • Role of BW Team in BWA Installation and Operations

    I am the lead BW team member at my company.  We will likely be making our first BWA purchase in the next month or two.  I have been asked by my boss to determine what the BW team's role will be in the installation and on-going operation of BWA.  Unfortunately, I have not been included in a single BWA meeting to this point, so I am really in the dark.  I am hoping that some kind soul on this forum, who has already installed BWA, would be kind enough to share some information with me.  I am not looking for a tremendous amount of detail ... just enough to help decide what kind of education and training the BW team members will need to be able to perform our duties.
    Thank you!
    Laurie Reid

    Hi,
      You can refer to the following links for details on BWA installation,
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1f6cc7d-0c01-0010-5a93-8def1fad5ea3?quicklink=index&overridelayout=true
    How to Install SAP BI Accelerator
    http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/103b0615-36a7-2a10-a78e-86de1456bec2
    BWA sample use case:
    http://www.infosys.com/SAP/thought-leadership/Documents/BI-accelerator.pdf
    http://www.sdn.sap.com/irj/sdn/bwa?rid=/library/uuid/23fd0dc2-0d01-0010-448e-bf3cc1aa08b6
    Regards,
    Balajee

  • Missing Master and Derived Roles

    Hello All,
                  I have got an odd scenario and I am hoping some of you might have run into the same issue or might point me to the right direction.
    Back ground
    We are on ECC 5.0 and have Master Derived Concept, and then Derived Roles are grouped in Composites
    We recently( Last week ) created some ( say 34 ) Derived roles and some (10) composites using a combinition of the newly created derived and some Old derived roles.
    Transported The derived seperatly and Composites seperately. Transports went successfully into QA and PRD.
    This week we noticed that all of the 34 derived roles are missing in DEV ONLY along with 28 Master of the 34 Child Roles. All the Childs and master still exist in QA and PRD.
    We have tried to look up the change Doc of the missing roles or the profiles or the authorizations of the missing roles and there is no change log under suim. Change Log shows when the role was created but nothing after that. According to Basis transports does not have any unusual log
    Since its a DEV system so no delete transports have come into DEV, therefore delete transport could not be an option.
    I have also uploaded one of the missing master roles from the PRD to DEV and it is succfully established the relation with the childs. I was hoping it might shake up the Change History regarding missing role but it did not, It now shows when the role was created earlier( 2006 ) and This week  agian but no Delete History
    Any Ideas on how to explain this behavior

    Another possible and imaginable human error worth looking into is that at some stage in the past a transport request was created for the master and child roles -- okay.
    Then the child roles were "broken" by changing org. levels and other fields in the authorization maintenance, so the roles themselves were deleted with the intention of creating them again from one of the "template" child-roles --> okay, seems reasonable to have happened.
    Then (here is the problem!) someone released the transport before the new child roles were created. This is interpreted by the system to be a deletion transport of roles.
    Additionally the sequence of the transports might have added additional obscurity to the issue and now, much later on, someone imported the transport into production which deleted the roles.
    <conspiracy_theory>
    The person then deleted the transport request from the queues and archived the change documents in SU83.
    </conspiracy_theory>
    Cheers,
    Julius

  • 3 posts in one on the Leopard "installation and setup" forum

    I just posted a topic "Cannot disable trackpad pinch open & close" on the Leopard "installation and setup" forum and the topic was posted 3 times.
    I first previewed my post, then posted the message from the preview pane. Interestingly, it took the forum server a very long time to display the preview pane ... and then a very long time (several minutes) to post the message after i clicked the post button.
    I did not get impatient and click any buttons twice ... I just waited, and somehow the message got posted 3 times. I can believe I did something inadvertent on my end ... but impatiently hitting the preview and post buttons while waiting was not it.
    If someone with power can remove 2 of the 3 repetitions, I'd appreciate it ... I couldn't figure out how to delete them myself

    fiddleaway wrote:
    Thanks. Is there a direct channel to the moderators anyone can use in circumstances like this?
    This is it. The Feedback forum is the place to post requests for the Hosts.
    I'd like to find out why my posting actions are generating multiple postings.
    This has been happening to many people and as Terence mentions seems to be a fault in the forum software. Some have noticed that it occurs when there appears to be a server lag. That is, they'll click the button to post and there will be a long lag in response from the web site, and then even though they never clicked another button, several posts will appear.
    It's not anything you did.

  • I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contactin

    I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contacting you

    Okay, so, fast forward from July to now -
    - I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
    - My computer spent at least 8 hours behind their closed doors in the workshop
    - Several complete erases of the harddrive have taken place
    - Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
    The good news is:
    - They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
    - They believe that my problems stem from either 1 of 2 things:
            - Faulty Hard Drive (even though it is brand new)
             - The wrong build of software being installed.
    Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
    - Andrew =)

  • Run PS Installer and Re-Install PS...

    Thank you for your help in advance.  I recently installed Adobe Photoshop CC 2014 and followed the prompts from the Creative Cloud Installer.  After being prompted that installation was successful, I proceeded to open Photoshop CC only to get the prompt as follows: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing.  Please run the Photoshop installer and re-install Photoshop."  Needless to say, I'm doing something wrong.  Would you please share with me where the PS installer is?  I cannot find it for the life of me... in any of the folders.  Do i "Uninstall" PS and then re-install?
    Thank you!

    This thread was incorrectly posted in the Adobe Captivate forums. It has since been moved to the Photoshop forums.

  • Forum admin and forum user

    I have both roles assigned: Forum Admin and Forum User.
    Q1. What is the use of this application: Change Admin User? Why everytime I have to set it to my current logged in user? Otherwise I always get No permissions.
    Q2. I created a new forum "TEST". But in Forum user role, I just get blank page. What could be the reason.

    We had the very same problem.
    After the deployment via SDM the iview template was there, but the iview template had a missing parameter: Forum View Target.
    Everything was fine, exept the page for the view was empty.
    We redeployed the KMC-UI (from the installing doc) and then restarted the portal.
    => all 3 parameters in the iview templates were available
    => Forums view did work fine
    Regards Martin

  • Problem with installation and activation

    Hi, I have a problem with the installation of Adobe Muse.
    I had a free 30-days trial, when it was over I bought the product ($ 13 per month), 
    I installed the program again and I see the same window with the finished Trials
    and it requires a serial number and does not allow to enter the program.
    I installed the program on your PC wife without any problems, but I can not install it on a laptop.
    I have a laptop with Windows 8 operating system.
    What I've done:
    1. Uninstalled the free program,
    2. check the connection to the Internet,
    3. has installed a new program from the official website adobe.com,
    4. Remove the line for the activation of the hosts file and resave the file,
    5. turned off the brandmower,
    6. rebooted.
    I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
    Please help me at [email protected]

    I guess this stuff helps me
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
    thanx
    >
    2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
        problem with installation and activation  created by Prabhakar.Kumar
    >> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
    >> Adobe Muse CC* - View the full discussion
    >> <https://forums.adobe.com/message/6619532#6619532>
    >>

  • I just did an itunes update on my windows vista 64 and have been getting a runtime error eversense.  Unstalled everything apple per microsoft forum discussions and solved the problem.  When is apple going to update this problem for itunes?

    I just recently did an itunes update on my Windows Vista 64 and have been getting a runtime C++ R0634 error ever since. Per microsoft forum discussions, I have removed everything apple on my computer to get this runtime error to stop.  When I tried to remove and reinstall itunes, I get an error message during installation and to try again. Has just become a cycle.  Apple, are you working on this? 

    I have exactly the same problem.  Got update notice from Apple for iTunes and getting the C++ runtime error R0634 ever since.  I have no clue how to fix it....meantime, I can't even pull up Outlook to check email.  HELP!!
    ksware

  • Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

    Hello,
    I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
    In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
    Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
    In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
    The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
    lf
    WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
    INFO: Creating new CFM connection
    INFO: Creating a new logger for oracle.sysman.top.agent
    INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
    INFO: Creating a new logger for OuiConfigVariables
    INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
    INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
    INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
    INFO: Successfully returning from CfmFactory.connect()
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 2 aggregate instances saved
    INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
    INFO: Framework waiting for Action to complete at 15:08:10.272
    INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
    WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
    WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
    INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
    INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
    INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
    INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
    INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
    1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
    2.AGENT_PORT=3872
    3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
    4.b_doDiscovery=false
    5.AGENT_BASE_DIR=/users/ncgf/em_agent
    6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
    7.s_hostname=nsn175-89.us.oracle.com
    8.OMS_HOST=nsn175-105.us.oracle.com
    9.b_startAgent=false
    10.b_secureAgent=true
    11.b_chainedInstall=false
    12.b_forceConfigure=false
    13.EM_UPLOAD_PORT=4904
    14.b_forceAgentDefaultPort=false
    15.s_staticPorts=
    16.PROPERTIES_FILE=
    b_skipValidation=false
    INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
    INFO: oracle.sysman.top.agent:Validating with http protocol ...
    INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
    SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
    INFO: oracle.sysman.top.agent:Validating with https protocol ...
    INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
    SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
    INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
    INFO: oracle.sysman.top.agent:Performing free port detection..
    INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
    INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
    INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
    INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
    INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
    1. state_dir=/users/ncgf/em_agent/agent_inst
    2. agentBaseDir=/users/ncgf/em_agent
    3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
    INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
    INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
    INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
    INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
    INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
    INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
    INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
    INFO: oracle.sysman.top.agent:Creating shared install...
    INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
    INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:Secure Mode: No
    INFO: oracle.sysman.top.agent:DeployMode : agent
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:Creating directories...
    INFO: oracle.sysman.top.agent:Creating private.properties...
    INFO: oracle.sysman.top.agent:Creating blackouts.xml...
    INFO: oracle.sysman.top.agent:Creating targets.xml...
    INFO: oracle.sysman.top.agent:Creating emctl control program...
    INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
    INFO: oracle.sysman.top.agent:Agent will not be secured.
    INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
    INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is  missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
    INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
    INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
    SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
    1. Agent Registration Password was not passed.
    2. b_secureAgent was passed as false
    3. The flag -forceConfigure was assed from agentDeploy.sh
    INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
    INFO: oracle.sysman.top.agent:Plugin Homes found.
    INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:
    INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
    INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
    INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
    INFO: oracle.sysman.top.agent:Plugin command completed with status=0
    INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.agent:---------------------------------------------------------------
    INFO: oracle.sysman.top.agent:---------------------------------------------------------------
    SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
    SEVERE: oracle.sysman.top.agent:Agent configuration has failed
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
    INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
    INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 2 aggregate instances saved
    INFO: done waiting for Action from 15:08:10.272
    Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
    "Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
    Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output.  Also if you can open an SR with oracle support to track this issue and its resolution. "
    [ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
    Oracle Enterprise Manager 12c 3.
    Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
    The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
    Do you want to continue using this directory? [yes/no] yes
    Enter password
    Emcli setup successful
    [ncgf@nsn175-105 bin]$ ./emcli verify_updates
    Verifying updates. Starting validation...
    Type       : Plug-in
    Description: Demo Hostsample Test Plugin
    Attributes
            Version: 1201000100
            Revision: 0
            OS Platform: Generic Platform
            Plug-in Name: Demo Host Sample Plugin
    Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
    For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

       Hello AkankshaSheoranKaler
    We have done the following, but we aren't able to resolve this issue. Thank you for your help!
    lf
    “This  happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
    On Enterprise Manager server [nsn175-105], we did the following:
    1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
    we start nfs service by executing command “service nfs start”.  
    On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
    On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
    After making this change, we ran agent deployment again. We encountered the same error as shown above.
    “You can fix the software library or you can download the agent bits in offline mode.”
    For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
    “Try downloading the bits again”
    We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
    (Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

  • Oracle Service does not start after installation of Domain role

    Hi all,
    here is my setting:
    Windows Server 2008 R2 64bit
    ORACLE ONE 11g
    I installed the database and it was working fine until I installed the domain controller role on this server.
    Finally I needed to uninstall this role again and restarted the server several times during this process.
    Now I can not access the database anymore. Listener starts, then stops.
    database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
    Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
    This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
    And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
    Thanks in advance...
    Meden
    Edited by: user10859969 on 13.01.2012 14:29

    And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
    So the best solution is CTRL-ALT-DEL and start all over again.
    If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
    Sybrand Bakker
    Senior Oracle DBA

  • Business Role and PFCG Role

    Hi all,
        I am new to CRM 7.0 Can someone explain  What is a Business Role in CRM 7.0 and what is the relationship between Business role and PFCG role. What is the transaction Code to create a Business role.
       And also I heard that there is no PCUI in CRM 7.0. Is it true and if so what is used in place of the PCUI
    Thanks.
    Neha.

    Neha,
    Next time please do a search in this forum on business roles, and you would find many topics discussing this information more completely.  I'm locking this thread due to it fact that this question has been asked many times before by many different people.
    These threads explain the topic in more detail:
    Re: Reg: Business Role
    Assignment pfcg-role to user and assignment pfcg-role to business role
    Thank you,
    Stephen

  • BP created with category Person and BP Role Consumer is not replicated

    Hello Gurus,
    I have created a BP with Category Person and BP Role Consumer but after saving my BP is not getting
    replicated to ERP, though in the Clasification Tab i could see consumer is being selected and the Account
    group 0170 - Consumer showing up. 
    I have also checked in PIDE transaction in ERP system this Account group has clasification E which is Consumer.person,and as numbe range is assigned to this Account group 
    i have checked in middleware there is an error message which says "BP XXXX doesnt not exist as customer,change not possible" and aslo one more message which says "no classification is assigned to BP"
    any customizing is missing in CRM system, or only customiaing required is in ERP only?
    Thanks and Regards
    chandu

    Hi,
    With respect to your question on below link.
    Re: BP created with category Person and BP Role Consumer is not replicated
    Please find the below path in ECC
    SPRO>Logistic General>Business Partner>Customer>Define Account Groups and Field Selection for Customers.
    Select 0170 Consumer account grp and click on details. You will see the Number range in General Data.
    Copy that number range and goto below path and check if the number range is internal or external.
    SPRO>Logistic General>Business Partner>Customer>Define and Assign Customer Number ranges. The popup will appear and select Define Number ranges for customer master. Click on display intervals. You will see the number range is mainatined internal or external.
    Hope this helps.
    Regards,
    Chandrakant
    Edited by: Chandrakant A on Dec 15, 2009 7:41 PM

  • Is it possible to modify the tag structure tree and the role map via scripting?

    We use unstructured FrameMaker to produce training materials which we distribute as tagged PDF to meet accessibility requirements.
    When FrameMaker creates a tagged PDF, it does a fairly good job of populating the structure based on the PDF setup information for the paragraph formats in the FrameMaker documents. However, there are some limitations in the support that FrameMaker provides. For example, almost all paragraphs are assigned to the P role even if they are headings and should be mapped to H1-H6.
    We want to be able to easily post-process a PDF that has been generated from FrameMaker to fix some of the tag structure issues (including tag names and the role map) so that the PDF will provide the optimum experience for a user of the JAWS screen reader.
    I spent some time reading the SDK documentation but didn't find much information about manipulating a tagged PDF via the API, especially via scripting.
    Does anyone have any examples or references which explain how to do it?

    AFAIK, it's not possible with a script. You might want to ask in the SDK forum, as it could be possible with a plugin.

  • Major issues with a add-on Emoji Cheatsheet and missing add-ons in Firefox 37.0.2 ?

    As soon as Firefox updated me to 37.0.2 installed I started having issues with missing add-ons and missing tool bar buttons.
    Instead spending all day reloading add-on from "Refreshing" Firefox I just started going through my add-ons and disabling them and restarting (4-5 at a time) till thinks went right. I spent a hour last night till I got down t last few that could because it . I left FIREBUG disable and things started working as is and Compatibility Reporter started working too.
    Well I woke up to start Firefox and to my shagrin it was messed up again. So I went back through and and remembered the few last add-ons I re-enabled right before I disabled Firbug. So I disable it and sure enough things went back to normal.
    What Add-on was that?
    '''Emoji Cheatsheet :: Add-ons for Firefox'''
    [https://addons.mozilla.org/en-US/firefox/addon/emoji-cheatsheet/?src=ss]
    When the icon for it shows on my toolbar everything else shows, yet when it goes awal many other things malfunction. I tried reloading Firfox several times and nothing change. So when I disable it and restarted things were normal and working.
    Anyone else experience this?

    Sorry, the post about clearing your cache was meant for a different question.
    I suggest opening a ticket on the issue forums for this plugin: https://github.com/johannhof/emoji-helper/issues
    P.s. If it helps, I currently have 16 add-ons installed.

Maybe you are looking for