Forward and Backward Scheduling

I have a couple of related questions.
1. Where can I configure if I want Forward/Backward Scheduling in Customization? and if I leave it blank will it do forward or backward scheduling?
2. Does the system not perform backward scheduling if Replenishment Lead Time (RLT) is setup? If yes why?

Hi,
Backward scheduling is the calculation of deadline dates: the arrival time at the customer site is calculated as the earliest
possible goods receipt time at the customers unloading point on the requested delivery date. All four of the delivery and
transportation scheduling lead times are subtracted from the customeru2019s requested delivery date to determine if this date can
be met.
The transit time, loading time, and pick/pack time are subtracted from the customeru2019s requested delivery date to calculate the
required material availability date.
The system calculates backward scheduling as follows:
Requested delivery date minus transit time = Goods issue date
Goods issue date minus loading time = Loading date
Loading date minus transportation lead time = Transportation scheduling date
Loading date minus pick/pack time = Material availability date
Forward scheduling is also done if no product is available on the material availability date calculated by backward
scheduling. The system does an availability check to determine the first possible date when product will be available. This
new material availability date forms the starting point for scheduling the remaining activities. The loading time, pick/pack time,
transit time, and transportation lead time are added to the new material availability date to calculate the confirmed delivery
date.
Regards
Ram

Similar Messages

What is forward and backward shedule in planning

what is forward and backward shedule in planning ?
and make to order

Hi,
Backward scheduling is always carried out for both delivery scheduling and transportation scheduling. If backward scheduling determines a material-availability deadline or transportation-scheduling deadline that lies in the past, the system automatically carries out forward scheduling to determine a delivery deadline that can be confirmed.
Backward Scheduling
The system first carries out backward scheduling from the requested delivery deadline:
Requested delivery deadline
./. minus transit time
Goods issue deadline
Goods issue deadline
./. minus loading time
Loading deadline
Based on the loading deadline, the system determines two further dates, the transportation planning deadline and the material availability deadline.
Loading deadline
./. minus transportation lead time
Transportation scheduling deadline
Loading deadline
./. minus pick/pack time
Material availability deadline
The earlier of these last two dates (material availability deadline and transportation scheduling deadline) determines when a schedule line becomes due for shipping.
Forward Scheduling
If backward scheduling determines a date in the past as the date on which a schedule line becomes due for shipping or if the material will not be available on the date calculated, the system automatically carries out forward scheduling to determine the earliest possible shipping deadline.
For example, starting from the current date, the system calculates the loading deadline, the goods issue deadline, and then the confirmed delivery date. It does this by adding together the shipping times mentioned above
check this link for [MTO|http://help.sap.com/bp_blv1600/V5600/BBLibrary/Documentation/147_Scen_Overview_EN_ID.ppt]
As well pl use the search functionality for regular kind of questions so that you may get lot of info.
regards
sadhu kishore

Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?

Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably? I don't see it listed in keyboard shortcuts; is there any way to add it? Thanks!

I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
Here they are.
Get information
Open iMovie Help
Command-Shift-Question Mark (?)
Open the Project Properties window
Command-J
Open the Project Theme window
Command-Shift-J
Show playhead info
Shows date, time, and keywords for video frames above the playhead.
Command-Y
Import and export
Import from camera
Command-I
Export movie
Command-E
Play video
Play video beginning from the frame beneath the pointer
Space bar
Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Left Bracket ([)
Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Right Bracket (])
Play selection
Slash (/)
Play selected event or project from the beginning
Backslash (\)
In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
Right Arrow key
In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
This action works only if you’ve already sped up the playback.
Left Arrow key
When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Down Arrow key
When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Up Arrow key
When playing Event video, jump forward to the next clip
Down Arrow key
When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
Up Arrow key
Play the selected Event or project full screen
Command-G
Exit full-screen mode
Escape (Esc) key
Move the playhead by one frame
Left Arrow key or Right Arrow key
Freeze the playhead
Hold down Control key
When skimming, keep the cursor in the middle of the row
Option-Shift
Manage projects and events
Create new project
Command-N
Move to Trash
Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
Command-Delete key
Open iMovie preferences
Command-Comma (,)
Page setup
Command-Shift-P
Print selected Event or project filmstrips
Command-P
Select and edit video
Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
Command-A
Select to playhead
Expands or contracts the selection from the nearest selection border to the playhead.
Shift-A
Deselect all clips
Command-Shift-A
Add selected frames to project
E
Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
Command-Shift-S
Cut selected frames
Command-X
Copy selected frames
Command-C
Paste selected frames
Command-V
Paste all adjustments
Command-Shift-V
Paste video adjustments
Command-Option-I
Paste audio adjustments
Command-Option-A
Paste crop adjustments
Command-Option-R
Paste cutaway, green-screen, or picture-in-picture adjustments
Pastes adjustments, depending on which type of video is selected.
Command-Option-U
Paste video effect

I'm looking for a music player that can skip forward and backwards a few seconds?

I'm looking for a music player app that can skip forward and backwards a few seconds?

MPD rocks, runs here for months without major problems.
The client side is very flexible, you can choose many players:
http://www.musicpd.org/clients.shtml
For X, for console, etc..
Edit:
MPD supports Icecast also, to create streams.
Last edited by mephisto (2007-05-15 14:00:36)

How to change the style of icons used on the tool bars mainly the forward and backwards arrows

Hi .
There always used to be a way of changing the look of firefox the arrowws ect at the moment i have just outline type arrows for forwards and backwards i would far rather have the older Green arrows far easier to see and look far better how do i cange this now
This is on Firefox 9.0.1 64 bit on Arch Linux current

Ok well this has only recently happened that the arrows have gone to these horrible outline things i use themes and personas but this is a new effect so looks like ity is down to canning either themes or personas because those arrows are to put it politely disgusting

How Can Viewers skip forward and backward between timelines!?

You can skip forward and backward through chapters that are on the same timeline but I can't skip backward to a timeline that came before the one I'm on. I thought this was an easy question someone must know the answer to this. I just need to check what I'm saying.
So I have 4 timelines
I put chapter markers at the end of each timeline so that people could skip forward to the next timeline if they wanted to. If there was no chapter marker at the end of the timeline then the timeline would have to be played to completion before going to the next. You would not be able to skip forward at all. The problem I'm having is that you cannot go backward to the timeline that came before.
So if I have a chapter at the end viewers are able to skip forward to the next timeline but they can't skip back.
Alright so Menu Remote settings do not work for Blu-ray discs either so you cannot use that setting to go backward from one timeline to the previous.
Is there anywhere to set that the first chapter of one timeline can somehow link back to the last chapter in a previous timeline or is it just impossible to go backward?
Isn't there anyone who knows how to skip backward from one timeline to the previous? I cannot find a action for this in encore.

Hi simonfrommount isa,
I'm sorry to hear you are having issues with the most recent iOS update. If you are still having issues with the connection or controls from your iPhone to your car stereo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting car stereo connections - Apple Support
Regards,
- Brenden

HT3775 I just upgraded my ipad to 6.0. I can no longer expand my audio files so that I can move forwards and backwards. I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?

I just upgraded my ipad to 6.0. I can no longer expand my audio files so that I can move forwards and backwards. I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?

Hi James,
I am listening to embedded training files on the Quick Time player (I think). They cannot be copied to protect the information. You only have the option of listening. I used to be able to click on the Q in the audio strip and it would provide a diagonal arrow and this would allow me to expand the bar to a full screen. I then had the bar which would allow me to navigate in case I wanted to listen again or in case I wanted to move forward. After my upgrade, I can no longer expand the strip to a full screen with the adjuster. Now I have not chance to take a break in listening to these audios and most of them are at least an hour long. Thanks for your help.

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

This sounds like a hardware issue. I haven't seen this particular problem reported before.

Rolling start point of an effect forward and backwards?

I downloaded a series of effects plug-ins that I've laid in my timeline. However, I want to change the point at which certain elements within the effect occur. Is there a way to roll the effect forward and backwards within the video beyond where the elements just happen to occur when you drag and drop it into the clip?
The effects I'm working with are "static glitches" and create random occurring distortions. When I lay one in, I sometimes feel that a certain distortion would look better if the whole, pre-designed effect shifted back half a second for instance, but I can't figure out how to do that... Thanks!

Thanks for the reply! Is the only way of doing this by splitting the clip? One of the things I specifically need to do is have a distortion that happens later in the effect happen at the beginning of the clip. For instance, I like the distortion that happens three seconds into the effect but the clip itself is only two seconds long. Maybe I could extend the head of clip in another timeline so that it falls on the part of the footage later on that I want and create a compound clip that I then import into my timeline and trim to the appropriate length... but this seems so complicated for and roundabout for a function I feel like FCP X should have but that I'm just not seeing..??

Forward and Backward arrows

I have been reading posts about creating browse sequences but
alas still am not sure how to get the forward and backward arrows
to appear.
I don't want to create a browse sequence as my topics don't
need to follow a particular order, i just want it to function like
a regular browser does.
Any insight on how to do this? thanks

Hi Anna
You might wish to review the following:
This
link should assist with creating a Browse Sequence
This
link should allow you to download my Skinny on Skins file that
will assist in changing the included behavior so your typical skin
buttons work like the browser buttons.
Cheers... Rick

Forward and Backward are disable on FireFox browsesr

Hi everyone,
When I run my flex 3 application using FireFox. The forward
and backward buttons on FireFox browser are disabled.
How can I make these two button enable? Thanks
May

Hi,
Take a look at
deep
linking

Forward and backward pass - network diagram

Does anyone have a .mpt file that allows you to perform forward and backward pass and display the ES, EF, LS, LF, SL in integer values instead the date formats?

Pardon me for bumping in, but I am assuming you want to show the date number for ES, EF etc.
You can with some calculations in Number fields.
For example:
Number1 (Early Start No) = DateDiff("d", [Project Start], [Early Start])
Number2 (Late Start No) - DateDiff("d",[Project Start],[Late Start])
You can continue in the same manner to calculate the number of days between the Project Start and Early Finish and Project start and late finish.
The Total slack field is a numeric value (in days) so no conversion needed.
You can then alter the network diagram view and replace the values as needed with [Number1], [Number2] etc.

In Firefox 3.6.10 I was able to go forward and backwards between pages without the page defaulting to the top of the page. Is there any way to prevent the page from automatically moving to the top when using the forwards and back buttons in Firefox Four?

I like to be able to navigate backwards and forwards without having to scroll down and find where I was previously. In Firefox Four, when using the forwards and back buttons, the page will automatically return to the top of the page. Is there any way to change this setting in Firefox Four to prevent it from doing that?

Thanks for the response. No Time Machine, but I probably have a backup from a few months ago on an external hard drive. :/ I guess it'd have useful history, but not if it overwrote the last 3 months or so of Awesome Bar, that might not be so great.

Navigating forwards and backwards in one file using Xcode text editor.

Hi all,
I come from a Visual Studio background, so here goes...
In VS, there is two very convenient buttons called "Navigate Forwards" and "Navigate Backwards", which allows me to jump back and forth to the locations that I have last edited; the only thing that comes close that I have found is for jumping back and forth between files. I searched everywhere and can't find equivalent functions in Xcode 3, please help!
Thanks,
Ke

Thanks. From what I've read in the developer's guide, CKEditor was available with assets built from the Flex model. However, I'm currently having a hard time trying to display the content of an attribute with content input through the CKEditor, because it's stored in a blob. Although I've found several examples showing how to read the content of a blob, none of them worked for me...

The effects of mentioning forward and backward consumption period under 40?

Dear all,
If I have mentioned strategy group 40 in material and by consumption mode as 2 and backward consumption and forward consumption period as 100 days,
what will be the implication of this if i do the MRP run?
regards,
Sanju

Hi,
Normally you will enter PIR for weeks or Months in MD61, if you use Strategy type 40 and consumption mode as 2, backward days as 100 and forward days as 100,
If a sale order comes the system will first take the backward 100 days and consume the PIR, and then forward for remaining sale order qty (if any).
For ex. Sale order qty 1000,
Last 100 PIR total qty (for last three months / last 100 days): 700
In future PIR qty for 100 days = 2000
then the system will consumes the 700 from the backward period and 300 from the forward period, then PIR becomes (backward = 0 (all are consumed), forward =1700 (300 consumed by the sale order)
Thanks,
JK

Forward and Backward Scheduling

Similar Messages

Maybe you are looking for