Forward/backward arrows gone

Dear Support,
I'm tired of "things" happening all by themselves with this OS! My 'go forward' and 'go back' arrows are gone from my safari header ; Only the renew page and add bookmark,autofill,and home buttons are there! AND my scrolling for the entire OS doesn't work. Totally frustrated with these...'things' that seem to just do their own thing!
G4/400mhz AGP Mac OS X (10.4)

Hello David:
Welcome to Apple discussions.
These are user-to-user forums. While Apple monitors the forums, they rarely post.
You said that
"I'm tired of "things" happening all by themselves"
Did you make any changes at all? Have you added third party software modifications to Safari?
You might try a couple of things.
Run permission repair from disk utility.
Run repair disk from your install DVD.
Close Safari and trash the preference file (com.apple.safari.plist). Open Safari and reenter your personal preferences.
Go to the view option and click on "customize address bar." You will see the options available. Select what you wish and click done.
I do not understand what you mean by
"my scrolling for the entire OS doesn't work."
If you can explain what you mean (if the above has not helped) someone might be able to give you suggestions.
Barry
Message was edited by: Barry Hemphill (formatting)

Similar Messages

The page forward/backward arrows have disapperared - how can they be returned?

Arrows @ top left for movement to previous screen have disappeared

I'm running 10.8 and Safari 6.0.2 so this might not apply to you exactly but, in that setup: in View on the menu bar is a setting for Show Toolbar. If it says "Hide Toolbar" then the toolbar is showing. If it says "Show Toolbar", it is not showing (so click on that and it will make the toolbar appear). If only certain pieces of the toolbar are missing, use View/Customize Toolbar.

Running 6.5.3 on Windows 7 64x. No navigation bar appears, no forward or backward arrows.

Running 3.6.3 on Windows 7 64x. No navigation bar appears, no forward or backward arrows.
== This happened ==
Every time Firefox opened
== Staright after installation

Be sure the Navigation Bar is being displayed. View > Toolbars, if there is no check mark next to Navigation Bar, click Navigation Bar to place a check mark.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Forward and Backward arrows

I have been reading posts about creating browse sequences but
alas still am not sure how to get the forward and backward arrows
to appear.
I don't want to create a browse sequence as my topics don't
need to follow a particular order, i just want it to function like
a regular browser does.
Any insight on how to do this? thanks

Hi Anna
You might wish to review the following:
This
link should assist with creating a Browse Sequence
This
link should allow you to download my Skinny on Skins file that
will assist in changing the included behavior so your typical skin
buttons work like the browser buttons.
Cheers... Rick

Internet Explorer's forward/backward for next/previous image

In addition to right/left arrow to move to next/previous image I would like LR team to add this keyboard shortcut:
Use Internet Explorer's forward for next image.
Use Internet Explorer's backward for previous image.
Here is the reason. I have ViewSonic mouse with five buttons. Extra two buttons I use for forward/backward command within Internet Explorer. It would be nice if the same two extra buttons I could use in LR.
At the moment I have the two extra buttons programmed to function as right/left arrow. That allows me to use them to go next/previous image in LR. In order to use them as a forward/backward command within IE I have to press Alt key.
It would be nice if LR team could add IE forward/backward to the list of keyboard shortcuts.
Best regards,
Ivan Kmecko

This is a function of the mouse driver...you should be able to configure settings based on the current application so LR and IE can use the same keys but it'll mean different things in each app.

Why are there no up/down arrows to show recent sites on the "Back/Forward" browser arrows?

FF 3.6 and earlier had a very useful feature on the "Back" and "Forward" navigation arrows that allowed me to quickly jump to pages a few farther back (or forward) than the just one I get by clicking the "Back" (or "Forward") arrow.
With FF 4.0, those very useful arrows are gone. How do I get them back?

If you just click and hold on the button you get the menu with all the sites you've been to. Then just click on the one you want.

Word forward & backward reverse

i have problem in most word files "its happen in word 2007,2010,2013" when I press forward arrow go backward or when press backward arrow go forward. I don't know how to fix it.

Are you using the arrow keys to move the insertion point in text? Or are you doing something else?
Does the problem occur only in Word? Have you tried a different keyboard?
Stefan Blom, Microsoft Word MVP
only with keyboard and only happen in Word.my keyboard is working fine.by the way its happen even when create new file of word.
its happen in most of versions of Office but now i'm using Office 2013 64bits.

Keystroke for going forward/ backwards?

Is there a Keystroke for going forward/ backwards?

Press the Command and left arrow key to go to the previous page, or the right arrow for the next page.
(49581)

LR 5 slideshow Mac - no forward/backward?

LR 5.0 on a Mac (tried both Mac Mini, MacBook Pro and MacBook Air - all running 10.8.4).
When I run a slideshow and pause it, the arrows keys to go backward/forward are not working.
Created a "testuser" account (so no LR prefs that have been inherited) and copied over a test catalog.
Same issue.
Also installed it on work laptop where I've never used LR. So no old "cruft" on account or inherited.
Same issue.
Is anyone else seeing this?
Would be good to know if it's reproducible.

Victoria Bamtpon figured out a workaround in another forum. They've added a new checkbox in LR5 "Manual Slideshow" in the playback module.
It means the slideshow doesn't advance by itself anymore but you can move forward/backward. Not ideal by any means vs the prior behavior, but at least it gets me going again.
Thank you Victoria!

On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

Hi cowboyincognito,
Thanks for visiting Apple Support Communities.
If you don't have the option to play music by genre on your iPhone, try this step to find the Genre option:
Browse your music library.
You can browse your music by playlist, artist, or other category. For other browse options, tap More. Tap any song to play it.
To rearrange the tabs in the Music app, tap More, then tap Edit and drag a button onto the one you want to replace.
Best Regards,
Jeremy

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

That's a comment in the file. It has no effect at all.

I can't get big forward/backward buttons

I have always customized my Firefox browser (thats why I have always loved Firefox since back in version 1.x. However I noticed that Firefox is suddenly becoming less and less customizable and more and more frustrating. I have gotten it to where I want it (almost). For some reason my forward/backward buttons are stuck on small. When they are in the "Navigation Toolbar" they are nice and big, but they shrink in the "Menu Bar". They never did this in 3.6 or prior to 3.6, they always worked fine. I tried turning "Small Icons" on and off with no success.
Here's what I mean:
http://i1202.photobucket.com/albums/bb375/murdockx/ff5.jpg

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

Step Forward/Backward One Field

Sadly, Avid Media Composer has been my daily editing tool (my place of employment is an Avid house). I started on FCP and freelance using my FCP machine... believe me, I would very much rather be cutting on FCP. Going from FCP to Avid is... well... an interesting and frustrating experience.
However, AMC does has some useful features. One in particular is the "Step Forward/Backward 1 field."
I searched the manuals and the FCP shortcut tool, but I don't really see anything similar-- unless I'm totally missing something. Does FCP have such a feature?
Thanks a bunch.
Message was edited by: Anthony Tutrone

You know what, unfortunately even that doesn't really work ... when the playhead is still FCP only ever displays the Upper Field in the Canvas +unless the canvas is set to 100%+. I once filed it as a bug but I am assured that this is how FCP was designed to work therefore it is not a bug. Go figure. If you add the Deinterlace Filter and tell it to remove the Upper Field you'll still see the upper field when the playhead is paused in the timeline, although It does correctly remove the Upper Field during playback and when rendered. The only workaround I'm aware of is to set the zoom level of the canvas window to 100%, at which point both fields are visible, and any field based effects are properly displayed.

Backward- Forward and Forward- Backward

Hi, all!
Can you explainfor me about +Backward- Forward and Forward- Backward+ in General Setting-> Inventory tab-> Planning.
I don'nt understand it, can you make clealy
Thank you!

Hi....
Consumption Method there are two available methods of forecast consumption
by the Sales Order:
Backward- Forward In this method, the Sales Order first goes
backwards to 'consume' the forecast which is closest to the Due Date of
the order and continues to the first day of the range if required (as
defined in Days Backward field below),
After that, if no forecast is found (or the forecast, which was consumed,
was insufficient) the Sales Order goes from the Order's due date and
forward (see an example below).
Forward- Backward - In this case the sales order goes forward to
'consume' the forecast which is closest to the Due Date of the order and
continues up to the last day of the range if needed (as defined in Days
Forward field below). After that, if no forecast is found (or the forecast,
which was consumed, was insufficient) goes from the Order's due date
and backward.
Days Backward - Defines the maximum number of days for the Sales Order to go
backwards in order to 'consume' the forecast.
Days Forward - Defines the maximum number of days for the Sales Order to go
forward in order to 'consume' the forecast.
If you are not yet understand you can search in SAP Portal a note that related to that.
Or if you want, you can send me your email address and i will send you the PDF file about MRP.
It has complete explanation for you to know.
Regards,
Lina Yuanita

Forward / backward consumption Logic ( Macro) in DP Planning book

Hi ,
i need to have Forward / backward consumption Logic ( Macro) in DP Planning book .
For example- say i have keyfigure - A , B. Kefigure B need to consume the value of keyfigure A ( forward/ backwrd) in DP planning book .
Is there any std MACROfunctionality to do this?
If NO. how we can write macro for this requirement ?
Regrds
Rajesh

Hi Aparna & desai,
Macro function - DEMAND_CALC( ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION ; ) will work only when we manintain product master with version and if we work in that same planning version. means every time it will go and refer product master setttings of 1) strategy 2) forward consumption days 3) backward consumtion days. So its more usful in SNP planning book.
But i am working in DP planning book and version which i am working is not involved in product master. so i hope this function will not work.
Is there any otherway to achive this with time series keyfigure . what logic i can use for macro?
Regrads
Rajesh

Forward/backward arrows gone

Similar Messages

Maybe you are looking for