Forward backward cursor howto??

howto move the cusor?

Sounds like you might like to know where the User Guide is:
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

Similar Messages

On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.

Hi cowboyincognito,
Thanks for visiting Apple Support Communities.
If you don't have the option to play music by genre on your iPhone, try this step to find the Genre option:
Browse your music library.
You can browse your music by playlist, artist, or other category. For other browse options, tap More. Tap any song to play it.
To rearrange the tabs in the Music app, tap More, then tap Edit and drag a button onto the one you want to replace.
Best Regards,
Jeremy

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

That's a comment in the file. It has no effect at all.

How to read data using SQLGetData from a block, forward-only cursor (ODBC)

Hi there. I am trying to read data a small number of rows of data from either a Microsoft Access or Microsoft SQL Server (whichever is being used) as quickly as possible. I have connected to the database using the ODBC API's and have run a select
statement using a forward-only, read-only cursor. I can use either SQLFetch or SQLExtendedFetch (with a rowset size of 1) to retrieve each successive row and then use SQLGetData to retrieve the data from each column into my local variables. This
all works fine.
My goal is to see if I can improve performance incrementally by using SQLExtendedFetch with a rowset size greater than 1 (block cursor). However, I cannot figure out how to move to the first of the rowset returned so that I can call SQLGetData to retrieve
each column. If I were using a cursor type that was not forward-only, I would use SQLSetPos to do this. However, using those other cursor types are slower and the whole point of the exercise is to see how fast I can read this data. I can
successfully read the data using a block forward only cursor if I bind each column to an array in advance of the call to SQLExtendedFetch. However, that has several drawbacks and is documented to be slower for small numbers of rows. I really
want to see what kind of speed I can achieve using a block, forward-only, read-only cursor using SQLGetData to get each column.
Here is the test stub that I created:
' Create a SELECT statement to retrieve the entire collection.
selectString = "SELECT [Year] FROM REAssessmentRolls"
' Create a result set using the existing read/write connection. The read/write connection is used rather than
' the read-only connection because it will reflect the most recent changes made to the database by this running
' instance of the application without having to call RefreshReadCache.
If (clsODBCDatabase.HandleDbcError(SQLAllocStmt(gDatabase.ReadWriteDbc, selectStmt), gDatabase.ReadWriteDbc, errorBoxTitle) <> enumODBCSQLAPIResult.SQL_SUCCESS) Then
GoTo LoadExit
End If
Call clsODBCDatabase.HandleStmtError(SQLSetStmtOption(selectStmt, SQL_CONCURRENCY, SQL_CONCUR_READ_ONLY), selectStmt, errorBoxTitle)
Call clsODBCDatabase.HandleStmtError(SQLSetStmtOption(selectStmt, SQL_CURSOR_TYPE, SQL_CURSOR_FORWARD_ONLY), selectStmt, errorBoxTitle)
Call clsODBCDatabase.HandleStmtError(SQLSetStmtOption(selectStmt, SQL_ROWSET_SIZE, MAX_ROWSET_SIZE), selectStmt, errorBoxTitle)
If (clsODBCDatabase.HandleStmtError(SQLExecDirect(selectStmt, selectString, Len(selectString)), selectStmt, errorBoxTitle) <> enumODBCSQLAPIResult.SQL_SUCCESS) Then
GoTo LoadExit
End If
' Cursor through result set. Each time we fetch data we get a SET of rows.
sqlResult = clsODBCDatabase.HandleStmtError(SQLExtendedFetch(selectStmt, SQL_FETCH_NEXT, 0, rowsFetched, rowStatus(0)), selectStmt, errorBoxTitle)
Do While (sqlResult = enumODBCSQLAPIResult.SQL_SUCCESS)
' Read all rows in the row set
For row = 1 To rowsFetched
If rowStatus(row - 1) = SQL_ROW_SUCCESS Then
sqlResult = clsODBCDatabase.HandleStmtError(SQLSetPos(selectStmt, row, SQL_POSITION, SQL_LOCK_NO_CHANGE), selectStmt, errorBoxTitle)
Call clsODBCDatabase.SQLGetShortField(selectStmt, 1, assessmentRollYear(row - 1))
Console.WriteLine(assessmentRollYear(row - 1).ToString)
End If
Next
' If the rowset we just retrieved contains the maximum number of rows allowed, there could be more data.
If rowsFetched = MAX_ROWSET_SIZE Then ' there could be more data
sqlResult = clsODBCDatabase.HandleStmtError(SQLExtendedFetch(selectStmt, SQL_FETCH_NEXT, 0, rowsFetched, rowStatus(0)), selectStmt, errorBoxTitle)
Else
Exit Do ' no more rowsets
End If
Loop ' Do While (sqlResult = enumODBCSQLAPIResult.SQL_SUCCESS)
The test fails on the call to SQLSetPos. The error message I get is "Invalid cursor position; no keyset defined". I have tried passing SET_POSITION and also SET_REFRESH. Same error. There has to be a way to do this!
Thank you for your help!
Thank You! - Andy

Hi Apelkey,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

Internet Explorer's forward/backward for next/previous image

In addition to right/left arrow to move to next/previous image I would like LR team to add this keyboard shortcut:
Use Internet Explorer's forward for next image.
Use Internet Explorer's backward for previous image.
Here is the reason. I have ViewSonic mouse with five buttons. Extra two buttons I use for forward/backward command within Internet Explorer. It would be nice if the same two extra buttons I could use in LR.
At the moment I have the two extra buttons programmed to function as right/left arrow. That allows me to use them to go next/previous image in LR. In order to use them as a forward/backward command within IE I have to press Alt key.
It would be nice if LR team could add IE forward/backward to the list of keyboard shortcuts.
Best regards,
Ivan Kmecko

This is a function of the mouse driver...you should be able to configure settings based on the current application so LR and IE can use the same keys but it'll mean different things in each app.

I can't get big forward/backward buttons

I have always customized my Firefox browser (thats why I have always loved Firefox since back in version 1.x. However I noticed that Firefox is suddenly becoming less and less customizable and more and more frustrating. I have gotten it to where I want it (almost). For some reason my forward/backward buttons are stuck on small. When they are in the "Navigation Toolbar" they are nice and big, but they shrink in the "Menu Bar". They never did this in 3.6 or prior to 3.6, they always worked fine. I tried turning "Small Icons" on and off with no success.
Here's what I mean:
http://i1202.photobucket.com/albums/bb375/murdockx/ff5.jpg

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

Step Forward/Backward One Field

Sadly, Avid Media Composer has been my daily editing tool (my place of employment is an Avid house). I started on FCP and freelance using my FCP machine... believe me, I would very much rather be cutting on FCP. Going from FCP to Avid is... well... an interesting and frustrating experience.
However, AMC does has some useful features. One in particular is the "Step Forward/Backward 1 field."
I searched the manuals and the FCP shortcut tool, but I don't really see anything similar-- unless I'm totally missing something. Does FCP have such a feature?
Thanks a bunch.
Message was edited by: Anthony Tutrone

You know what, unfortunately even that doesn't really work ... when the playhead is still FCP only ever displays the Upper Field in the Canvas +unless the canvas is set to 100%+. I once filed it as a bug but I am assured that this is how FCP was designed to work therefore it is not a bug. Go figure. If you add the Deinterlace Filter and tell it to remove the Upper Field you'll still see the upper field when the playhead is paused in the timeline, although It does correctly remove the Upper Field during playback and when rendered. The only workaround I'm aware of is to set the zoom level of the canvas window to 100%, at which point both fields are visible, and any field based effects are properly displayed.

Backward- Forward and Forward- Backward

Hi, all!
Can you explainfor me about +Backward- Forward and Forward- Backward+ in General Setting-> Inventory tab-> Planning.
I don'nt understand it, can you make clealy
Thank you!

Hi....
Consumption Method there are two available methods of forecast consumption
by the Sales Order:
Backward- Forward In this method, the Sales Order first goes
backwards to 'consume' the forecast which is closest to the Due Date of
the order and continues to the first day of the range if required (as
defined in Days Backward field below),
After that, if no forecast is found (or the forecast, which was consumed,
was insufficient) the Sales Order goes from the Order's due date and
forward (see an example below).
Forward- Backward - In this case the sales order goes forward to
'consume' the forecast which is closest to the Due Date of the order and
continues up to the last day of the range if needed (as defined in Days
Forward field below). After that, if no forecast is found (or the forecast,
which was consumed, was insufficient) goes from the Order's due date
and backward.
Days Backward - Defines the maximum number of days for the Sales Order to go
backwards in order to 'consume' the forecast.
Days Forward - Defines the maximum number of days for the Sales Order to go
forward in order to 'consume' the forecast.
If you are not yet understand you can search in SAP Portal a note that related to that.
Or if you want, you can send me your email address and i will send you the PDF file about MRP.
It has complete explanation for you to know.
Regards,
Lina Yuanita

Forward / backward consumption Logic ( Macro) in DP Planning book

Hi ,
i need to have Forward / backward consumption Logic ( Macro) in DP Planning book .
For example- say i have keyfigure - A , B. Kefigure B need to consume the value of keyfigure A ( forward/ backwrd) in DP planning book .
Is there any std MACROfunctionality to do this?
If NO. how we can write macro for this requirement ?
Regrds
Rajesh

Hi Aparna & desai,
Macro function - DEMAND_CALC( ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION ; ) will work only when we manintain product master with version and if we work in that same planning version. means every time it will go and refer product master setttings of 1) strategy 2) forward consumption days 3) backward consumtion days. So its more usful in SNP planning book.
But i am working in DP planning book and version which i am working is not involved in product master. so i hope this function will not work.
Is there any otherway to achive this with time series keyfigure . what logic i can use for macro?
Regrads
Rajesh

Magic mouse forward backward swiping does not work from time to time

Hello...
from time to time the forward/backward swiping functionality of my magic mouse does not work (The scrolling works though). Disconnecting and reconnecting does not do the trick. So I guess it might be a software problem. Restarting the iMac does not always help at once. After a couple of times it will work though again.
Can anyone help?
Regards
Bjoern

your answer should be here.
http://discussions.apple.com/thread.jspa?threadID=2211072&start=0&tstart=0

Keystroke for going forward/ backwards?

Is there a Keystroke for going forward/ backwards?

Press the Command and left arrow key to go to the previous page, or the right arrow for the next page.
(49581)

LR 5 slideshow Mac - no forward/backward?

LR 5.0 on a Mac (tried both Mac Mini, MacBook Pro and MacBook Air - all running 10.8.4).
When I run a slideshow and pause it, the arrows keys to go backward/forward are not working.
Created a "testuser" account (so no LR prefs that have been inherited) and copied over a test catalog.
Same issue.
Also installed it on work laptop where I've never used LR. So no old "cruft" on account or inherited.
Same issue.
Is anyone else seeing this?
Would be good to know if it's reproducible.

Victoria Bamtpon figured out a workaround in another forum. They've added a new checkbox in LR5 "Manual Slideshow" in the playback module.
It means the slideshow doesn't advance by itself anymore but you can move forward/backward. Not ideal by any means vs the prior behavior, but at least it gets me going again.
Thank you Victoria!

ITunes forward/backwards are glitchy

When I press the forward/backward buttons on my keyboard or in the iTunes window, they do not work as intended.
Forward: Goes to the beginning of the song.
Backward: Goes to the beginning of the song.
Forward, forward: Goes to the beginning of the song twice.
Backward, backward: Goes to the beginning of the song twice.
Forward, backward: Goes to the beginning of the song, then to the next song in the playlist.
Forward, backward, forward: Goes to the beggining of the song, then to the next song, then to the first song again.
Forward, backward, forward, backward, forward: Goes to the beggining of the song, then to the next song, then to the first song again, then to the third song, then to the first song again.
My guess is that somewhere in the coding, there is a trigger that determines what song is being played. When backwards is pressed it goes to the position of the correct song it is supposed to do, and then probably refreshes this trigger. However, for some reason, the trigger is broken with the forwards, and when the forwards is pressed, it plays the song it is on from the beginning again while thinking it is playing the next one. That is why when the back is pressed, it is refreshing off of the song it thinks it is playing and starts to play from the beginning of the next song... just an idea.
I would really like to fix this as always, any help or clarification that people would like would be appriciated. Accept all that: "List what your processor is, that is a large determining factor of your problem, and without it, I am unable to answer your question. Oh, and your computer model, mac address, and year it was made."

No one?

All Tracks Forward/Backward & Missing Effects

Hi,
1. Please tell me that fcpx has the equivalent to fcp7's All Tracks Forward and Backward in the tool palette. If so, where is it?
2. In fcp 10.0.8 it says i have 472 Missing Effects. When putting cursor over the Missing Effects Title a box comes up for about 5 seconds that reveals all the missing effects, but there seems nowhere to get that list as when you click on Missing Effects nothing happens. Is there someplace we can get a list of our Missing Effects in fcpx?
Thanks,
joe

Hi Luis, Yes I understand all of that, but to get the names of those effects which can be seen for 5 seconds when putting the cursor over Missing Effects there must be someplace i can click to see a list of the effects. without the list i can't find the programs that i need to get so that those effects will be on my mac. the editor believes it's unreasonable to ask him for a list of missing effects and won't send them. thanks!

How can I code for a click and drag to progress forward/backward in timeline

I'm working on a project, the goal is to have a .swf animation like this.
The functionality I'm looking for is:
1. I need my animation to make one full rotation and stop,
and then
2. I need to fix my AS3 so you have to CLICK/HOLD/DRAG to progress forward and backward through the timeline, but only when your holding the mouse button down.
Currently the code progresses the frame forward and backward in relation to the mouseX position.
Here is my current code:
import flash.events.MouseEvent;
var startPosition:Number=mouseX;
var delayTime=10;
gotoAndStop(1);
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMouse);
function onMouse(e:MouseEvent):void{
    stage.removeEventListener(MouseEvent.MOUSE_MOVE,onMouse);
    var currentPosition:Number=mouseX;
    if(mouseX-startPosition<=0){
        nextFrame();
    }else{
        prevFrame();
    setTimeout(setListener, delayTime);
function setListener(){
    startPosition=mouseX;
stage.addEventListener(MouseEvent.MOUSE_MOVE,onMouse);
any help would be appreciated,
Thanks.

Found a thread much like this one that solved all my problems
Here the link to anyone who might be pulling their hair out trying to figure this out in the future
http://forums.adobe.com/thread/570903?tstart=0
Thanks Adobe Forums

Forward backward cursor howto??

Similar Messages

Maybe you are looking for