Forward Billing if enabled iStore Customer UI not working

Hi,
For customer account level forward billing is enabled. Then when accessed customer UI not able to access. Page source code shows that forward billing is enabled.
But if we want to use forward billing along with iStore what setup to do. And why forward billing not allowed for istore.??
Ashish

Hello Ashish,
The details in the Doc ID 1925047.1 are for the Customer UI. The option for Balance Forward Billing is referenced if this is enabled in the profile class setup in Receivables. The iStore user needs to be setup in Receivables with a person account. The example in the note is for Guest user, but the same applies for any iStore user.
I hope this clarifies.
Regards,
Debbie

Similar Messages

Enable/Disable Library Filters not working properly

I am running LR 3.4.1 on OS X 10.6.8. The Library>Enable Filters command does not work properly when I have a Library Filter set up to filter on more than on criterion. For example, I have a Library Filter preset called "Needs Location Keywords" that selects all images for which don't have "Location" as one of their keywords and which are not flagged as Rejected. In other words, there are two filter criteria applied: 1) TEXT: Keywords "Don't Contain" "Location"
2) ATTRIBUTE: Flag = Flagged OR Flag = Unflagged Toggling the Filter State by choosing Library>Enable Filters works as desired when the Filter State is changed to OFF; all images in the selected folder are displayed. However, when Library>Enable Filters is selected a second time, changing the Filter State back to ON, only one of the original filter criteria is applied, namely: 1) TEXT: Keywords "Don't Contain" "Location" However, ATTRIBUTE Filtering is NOT re-enabled as one would expect.
This is repeatable with different filter settings and different folders.
Is this behavior unique to my system or are other seeing the same thing?
Thanks,
Michael

It is a known problem, but certainly not widely-known. The filter columns don't work properly on custom fields when the field is text and when the entered value consists of more than one word. IIRC they work if the possible values are listed in the plug-in's field definition, or with "enum" fields.
Smart collections do work as expected with text custom fields.
John

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Forwarding port for Counter-strike: Source is not working

With my linksys router (Model WRT54G)I tried forwarding my port for a Counter-Strike: Source server. My friends tried it after I tried forwarding the ports and it did not work. It looks like this: |Application|Start|End--|Protocol|Ip-Adress------|Enabled| |CS1--------|1200-|1200-|Both----|192.168.1.[105]|Check--| |CS2--------|2700-|27015|Both----|192.168.1.[105]|Check--| |CS3--------|27020|27039|Both----|192.168.1.[105]|Check--| I can get on the server but my friends can not. And yes, I did uncheck "Block Anonymous Internet request". Message Edited by Iridium on 08-16-2007 07:37 PM Message Edited by Iridium on 08-16-2007 07:38 PM
Message Edited by Iridium on 08-16-2007 07:38 PM

Is the IP address 192.168.1.105 really the IP address of the server in your LAN?
Moreover, check what kind of modem you have. Follow the instructions here. If the IP address on the status page is a private IP address and the IP address on whatismyipaddress.com is different then your modem does routing too and you have to configure port forwarding there as well.

Custom Field not working

Hi,
I've made a project level custom field in PWA that takes "Total Slack" (in-built duration field) and based on a switch formula gives out 3 values viz. High, Medium, Low The field formula is as mentioned below:
Switch([Total Slack] <= -7, "High", [Total Slack] >= 0, "Low", [Total Slack] > -7 And [Total Slack] <= -1, "Medium")
The formula works very well and displays value as High for projects with Total slack less than -7. However, the formula is not working for Total Slack between -7 and -1 i.e. greater than - 7 and less than -1. The formula returns the value as "High"
only.
I've tried editing and publishing the project both from PWA as well as Proj Professional after updating task duration to calculate Total Slack.
This field is critical and used in many views. I am looking for a solution to resolve this issue. Any help in this regard would be appreciated.

The next step then would be to move away from the SWITCH statement and use a nested if statement, along the lines of....
iif ([Total
Slack]/[Minutes
Per
Day]<=-7,"High",iif([Total
Slack]/[Minutes
Per
Day]<=-1,"Medium","Low"))
Please note that I haven't validated this formula as I don't have MSProject on this PC, but it should be good enough to take you forward.
Ben Howard [MVP] | web |
blog |
book | P2O

IOS 5 Custom Vibrations not working

I am trying to assign a custom vibration to a specific person in my Contacts on my iPhone 4. I have activated, created and saved the vibration as instructed and I have assigned it in the edit contact screen. (When in the edit contact screen I have three 'sound' option menus: One titled 'Ringtone'; underneath that, one titled 'Vibration' and then separate and under that, one titled 'text tone'). I have assigned my custom vibration under the 'Vibration' menu.
However, whenever that specific contact sends me a text message, my phone still vibrates with the default two 'vibrations', just like it always has. It will not do the custom vibration.
I have a feeling it has something to do with the 'text tone' option menu, but it does not give me any option to assign a vibration in that menu. I have not been able to get any other vibrations other than the default vibration when I am sent a text.
How do I get this working? I have tried it on a few other contacts with the same results.

After hours of fiddling I've come to the same conclusion as all of you. Customer vibes ONLY work with phone calls.
cpage,
I'm with you, apple needs to enable custome vibrations for:
1. Calls
2. Texts
3. Emails
PLEASE READ THIS APPLE.
Thanks.

New custom mof not working on half of computer inventory

Hello!   Hopefully someone can help me with this one. 3 days ago I created a custom mof with RegKeytoMof 3.1.   I've used this before and have never
had an issue. However, this latest mof add doesn't seem to work on around 1000 computers.   I can't quite figure out what is wrong.
They're all either Windows 7/Windows 8 and all 64bit.   No consistency I can see with the ones not working. The entries are in the registry and show in wmi.
However, the inventoryagent.log doesn't show it scanning for this.
I've tried a full inventory sync and a install (with uninstall checked).   Still same results.
I am on SCCM 2012 R2
Here are the mof entries. Thanks for the help!!!
// RegKeyToMOF by Mark Cochrane (thanks to Skissinger, Steverac, Jonas Hettich & Kent Agerlund)
// this section tells the inventory agent what to collect
// 12/13/2013 6:55:36 PM
#pragma namespace ("\\\\.\\root\\cimv2")
#pragma deleteclass("InternetExplorer", NOFAIL)
[DYNPROPS]
Class InternetExplorer
[key] string KeyName;
String MkEnabled;
String Version;
String Build;
String W2kVersion;
Uint32 IntegratedBrowser;
String svcKBFWLink;
String svcVersion;
String svcUpdateVersion;
String svcKBNumber;
[DYNPROPS]
Instance of InternetExplorer
KeyName="RegKeyToMOF_32";
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|MkEnabled"),Dynamic,Provider("RegPropProv")] MkEnabled;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|Version"),Dynamic,Provider("RegPropProv")] Version;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|Build"),Dynamic,Provider("RegPropProv")] Build;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|W2kVersion"),Dynamic,Provider("RegPropProv")] W2kVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|IntegratedBrowser"),Dynamic,Provider("RegPropProv")] IntegratedBrowser;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcKBFWLink"),Dynamic,Provider("RegPropProv")] svcKBFWLink;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcVersion"),Dynamic,Provider("RegPropProv")] svcVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcUpdateVersion"),Dynamic,Provider("RegPropProv")] svcUpdateVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcKBNumber"),Dynamic,Provider("RegPropProv")] svcKBNumber;
#pragma namespace ("\\\\.\\root\\cimv2")
#pragma deleteclass("InternetExplorer_64", NOFAIL)
[DYNPROPS]
Class InternetExplorer_64
[key] string KeyName;
String MkEnabled;
String Version;
String Build;
String W2kVersion;
Uint32 IntegratedBrowser;
String svcKBFWLink;
String svcVersion;
String svcUpdateVersion;
String svcKBNumber;
[DYNPROPS]
Instance of InternetExplorer_64
KeyName="RegKeyToMOF_64";
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|MkEnabled"),Dynamic,Provider("RegPropProv")] MkEnabled;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|Version"),Dynamic,Provider("RegPropProv")] Version;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|Build"),Dynamic,Provider("RegPropProv")] Build;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|W2kVersion"),Dynamic,Provider("RegPropProv")] W2kVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|IntegratedBrowser"),Dynamic,Provider("RegPropProv")] IntegratedBrowser;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcKBFWLink"),Dynamic,Provider("RegPropProv")] svcKBFWLink;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcVersion"),Dynamic,Provider("RegPropProv")] svcVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcUpdateVersion"),Dynamic,Provider("RegPropProv")] svcUpdateVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|svcKBNumber"),Dynamic,Provider("RegPropProv")] svcKBNumber;
// RegKeyToMOF by Mark Cochrane (thanks to Skissinger, Steverac, Jonas Hettich & Kent Agerlund)
// this section tells the inventory agent what to report to the server
// 12/13/2013 6:55:36 PM
#pragma namespace ("\\\\.\\root\\cimv2\\SMS")
#pragma deleteclass("InternetExplorer", NOFAIL)
[SMS_Report(TRUE),SMS_Group_Name("InternetExplorer"),SMS_Class_ID("InternetExplorer"),
SMS_Context_1("__ProviderArchitecture=32|uint32"),
SMS_Context_2("__RequiredArchitecture=true|boolean")]
Class InternetExplorer: SMS_Class_Template
[SMS_Report(TRUE),key] string KeyName;
[SMS_Report(FALSE)] String MkEnabled;
[SMS_Report(TRUE)] String Version;
[SMS_Report(FALSE)] String Build;
[SMS_Report(FALSE)] String W2kVersion;
[SMS_Report(FALSE)] Uint32 IntegratedBrowser;
[SMS_Report(FALSE)] String svcKBFWLink;
[SMS_Report(TRUE)] String svcVersion;
[SMS_Report(FALSE)] String svcUpdateVersion;
[SMS_Report(FALSE)] String svcKBNumber;
#pragma namespace ("\\\\.\\root\\cimv2\\SMS")
#pragma deleteclass("InternetExplorer_64", NOFAIL)
[SMS_Report(TRUE),SMS_Group_Name("InternetExplorer64"),SMS_Class_ID("InternetExplorer64"),
SMS_Context_1("__ProviderArchitecture=64|uint32"),
SMS_Context_2("__RequiredArchitecture=true|boolean")]
Class InternetExplorer_64 : SMS_Class_Template
[SMS_Report(TRUE),key] string KeyName;
[SMS_Report(FALSE)] String MkEnabled;
[SMS_Report(TRUE)] String Version;
[SMS_Report(FALSE)] String Build;
[SMS_Report(FALSE)] String W2kVersion;
[SMS_Report(FALSE)] Uint32 IntegratedBrowser;
[SMS_Report(FALSE)] String svcKBFWLink;
[SMS_Report(TRUE)] String svcVersion;
[SMS_Report(FALSE)] String svcUpdateVersion;
[SMS_Report(FALSE)] String svcKBNumber;

This appears to be resolved... I think something got corrupted on my custom client settings after the mof import. I deleted it and recreated a new client settings for our pcs. I then re-enabled the hardware inventory for these 2 mof entries.
I updated the policy and then did another hardware inventory cycle. I now see the entry in the log and in resource explorer.

Customer Workflows Not Working from SRM Inbox

Hi everyone,
We are upgrdaing our EBP v3.5 system to SRM 5.0 (SRM SERVER 5.5 SP 5).
We are using integrated ITS and have many bespoke workflows which need to executeable in the SRM inbox via the integrated ITS and ultimately the portal (EP 7.0).
We have various issues with our bespoke workflows not working. The 2 errors we have found are:
1. When the users click on the workitem from the SRM inbox they sometimes see 'Service Cannot be Reached' error.
2. Other times they see the workitem details with no user decision buttons shown.
3. Other times the user decision buttons are shown but if the user clicks on one, they see a blank page with text "workitem currently locked by user WF_BATCH" at the top. This is an 'advance with dialog' task which works fine via SAPGUI.
Any ideas on any of the specific issues, or anything which we need to do generally to get custom workitems to be executeable via the ITS?
Thanks a lot,
Nick

Hi abhijit,
I checked that but I set it to blank in debug mode..but its still disappearing...the button disappears after pressing enter on error message.
actually the BADI when I implemented there is one method where I set E_ADD_ON_ACTIVE flag to 'X' to bring that button(recommended by SAP). that method is not getting called...

Flex 4: Custom ScrollBar not working in Custom DropDownList

Hello,
I'm having an odd issue that I just cannot figure out. I have a custom DropDownList .as component (to pass color values) and a custom skin. In this skin I am using a custom Scroller (same AS file component with mxml skin). When I use this configuration, clicking on the scrollbar just closes the DropDown. If I remove the skin from my custom scrollbar it works, which leads me to believe it has something to do with the DropDown skin. Even if I revert my custom Scroller to the spark Scroller, it still doesn't work. I've narrowed it down to what seems like a problem with my DropDownList skin.
Not really sure what code to put here, but all I've been doing is right clicking my project and making new ActionScript components and MXML skins from the default skin. Here is my DropDownList skin, not sure if I should paste any other code? I have no idea what would be causing this, so I don't really know what code to place.
 [HostComponent("ccm.DropDown.DropDownList")]

Woops, the code didn't place correctly, here it is:
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:fb="http://ns.adobe.com/flashbuilder/2009" alpha.disabled=".5" xmlns:Scroller="ccm.Scroller.*" xmlns:DropDown="ccm.DropDown.*">
 <fx:Metadata>
 [HostComponent("ccm.DropDown.DropDownList")]
 </fx:Metadata>
 
 <fx:Script fb:purpose="styling">
 <![CDATA[
 import flash.filters.BitmapFilterQuality;
 import flash.filters.BitmapFilterType;
 import mx.controls.Alert;
 import spark.filters.*;
 /* Define the content fill items that should be colored by the "contentBackgroundColor" style. */
 static private const contentFill:Array = [];
 * @private
 override public function get contentItems():Array {return contentFill};
 * @private
 override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
 openButton.setStyle("cornerRadius", getStyle("cornerRadius"));
 super.updateDisplayList(unscaledWidth, unscaledHeight);
 ]]>
 </fx:Script>
 <s:states>
 <s:State name="normal" />
 <s:State name="open" />
 <s:State name="disabled" />
 </s:states>
 
 <s:PopUpAnchor id="popUp" displayPopUp.normal="false" displayPopUp.open="true" includeIn="open"
 left="0" right="0" top="0" bottom="0" itemDestructionPolicy="auto"
 popUpPosition="below" popUpWidthMatchesAnchorWidth="true" >
 
 <s:Group maxHeight="134" minHeight="22" >
 <s:Rect id="fill" left="1" right="1" top="1" bottom="0" bottomLeftRadiusX="16.5" bottomRightRadiusX="16.5" topLeftRadiusX="16.5" topRightRadiusX="16.5" >
 <s:fill>
 <s:SolidColor color="0xFFFFFF" />
 </s:fill>
 <s:filters>
 <s:GlowFilter
 color="0x000000"
 alpha=".35"
 blurX="6"
 blurY="6"
 strength="1"
 quality="{BitmapFilterQuality.HIGH}"
 inner="true"
 knockout="false"/>
 </s:filters>
 </s:Rect>
 
 <Scroller:Scroller id="scroller" left="8" top="8" right="8" bottom="8" hasFocusableChildren="false" minViewportInset="1"
 showButtons="false"
 trackColor="{hostComponent._trackColor}"
 thumbColor="{hostComponent._thumbColor}"
 skinClass="ccm.Scroller.ScrollerSkin">
 
 <s:DataGroup id="dataGroup" itemRenderer="ccm.DropDown.DropDownItemRenderer">
 <s:layout>
 <s:VerticalLayout gap="0" horizontalAlign="contentJustify"/>
 </s:layout>
 </s:DataGroup>
 </Scroller:Scroller>
 </s:Group>
 </s:PopUpAnchor>
 
 <DropDown:DropDownButton id="openButton" left="0" right="0" top="0" bottom="0" focusEnabled="false"
 skinClass="ccm.DropDown.DropDownButtonSkin"
 buttonColor="{hostComponent._buttonColor}"
 />
 
 <s:Label id="labelDisplay" verticalAlign="middle" maxDisplayedLines="1"
 mouseEnabled="false" mouseChildren="false"
 left="12" right="30" top="2" bottom="2" width="75" verticalCenter="1" />
</s:SparkSkin>

File upload custom renaming not working with {KT_ext}

Hi,
I used many times custom renaming with file upload, and used {KT_ext} for file's extension, but in first ADDT project is not working. I use this:
$uploadObj->setRenameRule("{GET.id_cd}_{track}.{KT_ext}");
Does anybody know if {KT_ext} is broken in ADDT?
Thank you,
Ruben

Hi Günter,
{track} and {id_track} are both table fields, and setRenameRule worked right with both, but it didn't with {KT_ext}.
I've changed {track} with {id_track} in first page, and it stills fail to put extension.
But maybe is this, in first page the column for Update Transaction is like this
$upd_cds_peces->addColumn("mp3", "FILE_TYPE", "POST", "mp3");
and in the second page (where it works right) is
$upd_cds_peces->addColumn("mp3", "FILE_TYPE", "FILES", "mp3");
Althought in both cases the file is uploaded and DDBB field is filled, maybe in first case the TNG doesn't expect a file and cannot find its extension.
I'll try to change it,
thanks,
Ruben
Edit: Yes, it was this... Now it works. Thank you Günter for your help!

Enable Commenting & Measuring in not working

I am having pdf Dynamic XML Form(Interactive form). and trying to Enable Reader Extended Features.
I just go through the File --> Save As --> Reader Extended Features --> Enable Commenting & Measuring
But Option is not working. It is Clickable but nothting it prompts.
The same option is working in Old version of same form which is also Dynamic Xml Form(Interactive form).
Please Help.
Thanks in advance !!

Santosh,
Really thanks for your consideration.
Yes , i found the reason, the difference only is Old version is static pdf form and i also found that a no. of event are not working in this due to static functionality, which are passing very fine in Dynamic form.
But question is still there.Is Dynamic form(Xfa based) does not show Commenting & Measuring functionality???

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

Urgent--custom servlet not working with https/gateway of the portal server

We have created the custom servlet to add some more authentication to the login screen. I have explained detaildely below.
We have set if password reset change password screen should come by using identity server.
First screen comes which asks �user id� and �password�.
after this next screen comes with �old password�, �New Password� and �Confirm Password� (as we have forcefully asked user to change password after reset by using identity server ).
On this page we have added two new filed �Date of Birth� and �Date of Joining�.
And we are forcefully transferring request to our Custom Servlet which will validate the �Date of Birth� and �Date of Joining� from the database and submit the same a form as required by Login Servlet to validate the default parameters �old Password�, �New Password� and �Confirm Password� (which is the default validation without adding custom Servlet).
This whole process is working with �http� protocol and giving �unable to connect� host with �https� protocol.
Without custom Servlet process is like this, which is working
Login (usrid, password) � Login (Old Password, New Password, Confirm Password) � Portal home Page
With custom Servlet , Which is not working with �https� Protocol. we are getting the message "Authentication Failed" screen.
Login (usrid, password) --> Login (Old Password, New Password, Confirm Password , Date of Birth, Date of Joinig) --> Custom Servlet validate Date of Birth, Date of Joining --> Login (Old password, new Password, Confirm Password) --> Protal Home Page
This one works with http, whereas this one gives the "Authentication Failed" screen with the https.
Please let me know if anybody have implemented this and help me to resolve the issue.
Best Regards
Ramkumar

Hi,
I am also getting this error message in the sun ONE webserver error log file....
[20/Nov/2004:13:42:39] failure ( 6162): for host 172.16.5.21 trying to GET /amserver/UI/Login, service-j2ee reports:
StandardWrapperValve[LoginServlet]: WEB2792: Servlet.service() for servlet LoginServlet threw exception
com.iplanet.jato.CompleteRequestException
at com.sun.identity.authentication.UI.AuthenticationServletBase.onUncaughtException(AuthenticationServletBase
.java:141)
at com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
Regards
Ramkumar R

Java object with ArrayList of custom objects not working

I have a custom java object that has an ArrayList of another set of custom objects (code listed below). I can pull back a Customer object (to flex client) and it's recognized as a Customer action script object, but the ArrayList in the Customer object is not recognized as an ArrayCollection of Accounts. Instead it is an ArrayCollection of Action Script Objects.
At first I thought something was wrong with my action script Account class, but then I tried to pull back just an Account and it was recognized as an action script Account. It's just when I have my Customer object with an ArrayList of Accounts that it isn't getting converted.
Is there something else I need to do to have that ArrayList be recognized as an ArrayCollection of Accounts on the Flex Client side? Is there some way of specifying what type an ArrayCollection is mapped to?
Thanks in advance for the help!
public class Customer {
 private String name;
 private String address;
 private ArrayList<Account> accounts;
 public Customer(){
 public String getName(){
 return name;
 public void setName(String str){
 name = str;
 public String getAddress(){
 return address;
 public void setAddress(String str){
 address = str;
 public ArrayList<Account> getAccounts(){
 return accounts;
 public void setAccounts(ArrayList<Account> list){
 accounts = list;
public class Account {
 private long accountNumber;
 private String type;
 private double balance;
 public Account(){
 public long getName(){
 return accountNumber;
 public void setName(long l){
 accountNumber= l;

I accidently found how to make this work. I may have missed something while reading about blazeDS reflection, but I thought I'd pass this along anyway.
What I have is I have an class A. In class A I have an arraycollection of Class B. If I want that arraycollection to return to the server with the correct class, then I need to include Class B in the compiled swf. How I have done that is to create a dummy variable of type B. Importing B will not work you actually need to have a member variable of type B even if you don't need it.
Example
import dataobjects.B;
[RemoteClass(alias="dataobjects.A")]
public class A {
 private var _b:B; //This is never used, but needed to include B object in swf to be reflected.
 private var_ bList:ArrayCollection = new ArrayCollection();
public function A(){
public function set bList(list:ArrayCollection):void{
 _bList = list;
public function get bList():ArrayCollection{
 return _bList;

Forward Billing if enabled iStore Customer UI not working

Similar Messages

Maybe you are looking for