Forward Chapter to another track

Hello,
I have multiple tracks with chapters on my DVD. I have the end jump on the last chapter set to go to the next track. This works nice but if I want to skip to the next track I can't. I must wait until that chapter is over and then it will automatically jump. How can I make it so if I hit the forward chapter button it will skip to another track?
Thanks
Dual 1.8 G5 4GB Mac OS X (10.4.2)

I see....You can try a script at that chapter's end jump but I don't think the Next button will activate it either.
One thing you could try (and if the above doesn't work then this would be my only answer) -
make sure you have 15 sec - 1 sec of black at the end of your existing track. Make 1 chapter point from where the black begins and set your tracks end jump to the next track
when you hit next it will go to the "first" chapter marker and the user will see black for 15 frames - 1 sec THEN it will jump to the track you need. Kinda of crude work around but if done right the user will not be able to tell - it will just take a little longer then actually skipping chapters.
Do this for every track in your project
In fact i do this on all tracks that have chapters because people love to push next and previous and are confused when they come to the end of a movie and all of a sudden the next button doesn't work
Hope this helps
PS - and hanumang is right - aviod setting end jumps on chapters in DVDSP

Similar Messages

Chapter forward goes to seperate tracks

Sorry for the dumb question, but I don't have time to reserch it. On my DVD player when I press chapter forward it will go to the next chapter, but when it gets to the last chapter in the track, if you chapter forward again, it will go to next track instead of doing nothing. What's my problem.
Thanks

Jake,
I'll pay attention to UOPs in next authoring !
I transmitted my experience with my JVC standalone player with some authoring I did some time ago. Everything worked fine in the computer but in the player (and in SPECIAL with slideshows) the NEXT button made a crazy jump to a track that had no relationship with the previous in DVDSP. I solved that crazy behaviour with connection settings "next jump" (It took me some time of researching to find the problem !).
Now I use to take care of the NEXT JUMP in the connections and never found such problems again in my player or in any customer standalone players.
As I told you, I'll read about the UOPs and try to experiment with them.

When i try to open piano roll it is stuck on the same track regardless of whether another track is selected. I cannot elect a new synt track and pull up in piano roll

When i try to use piano roll it always goes back to a single track. Even if I select another track or adda new blank track it will not open.
Also if I add notes to the track that opens I cannot hear them when i place them on piano roll

There's a little icon in the top left corner of the piano roll window that looks like a pair of chain links. If that is selected (goes yellow) then the piano roll editor is linked to the arrange page region selection(s). Sounds like what you want.
It's really useful sometimes to be able to unlink, so that you can keep one piano roll open (to watch the timing of the notes, for example) and not haver it change each time you do something in the arrange page.
Also, next to it is a little man running icon. If that is selected, the piano roll will chase the cursor. If not selected, it won't. Also useful sometimes.
Hope that helps

Using DC from another track ??? possible??

Hi Experts,
Out of curiosity i wanted to know whether i can access public part of some other DC DC1 from some other track T1 from a different DC DC2 of another track T2?
If yes , can you please tell me how?
Regards,
Ashish Shah

Hi Ashish,
Ans: NO
Explanation:
U cannot connect to 2 tracks at once, U can only connect to one track at any time.
So you cannot access public part of some other DC DC1 from some other track T1 from a different DC DC2 of another track T2?
Because when u are connected to T2, Only dc's under S/w componentents in Track T2 can be seen and hence u cannot acess Public part of someother Dc in Track T1.
Thanks n Regards,
Archana

Copying Clip in another Track

Good morning,
I am using FCE 3.0 and am having trouble copying clips into another track. I have tried the Copy/Paste method as well as dragging the selected clip with the <Option>key.
The Copy/Paste method does not paste the clip at the playhead on a different track, and the <Option> key method simply moves the clip from one track to another.
I'm sure I'm missing some simple element here and would like to know what it is.
Thanks.

Hi(Bonjour)!
For the copy/paste way: pay attention to select the correct video and audio tracks targets.
Sometimes, it's easier to place your playhead right after the last clip of the sequence and paste. Reposition the resulting copy.
For the option drag: pay attention to use option key BEFORE clicking on your original clip, and drag.
Check if your tracks are locked.
Michel Boissonneault

TS4592 I have an ibooks file that when I make a change to a page in one chapter it throws a bunch more pages in at the end of the chapter from another chapter in the book. Anybody have any ideas what is going on?

I have an ibooks file that when I make a change to a page in one chapter it adds additional pages at the end of the chapter from another chapter. Any ideas what is going on and how I can fix this?

Text pages? from what you say you are getting the auto flow function to add pages either because you have flowing text or because you have a lot of blank lines as you would if you tap return to move blank space around.

DCs to move from one tract to another track

Hi,
              We have two tracks one is in DC0 and the other is DC1.
               We have done lot of developments in the DC0 track and now we need to move this code
               from DC0 track to DC1 track.
Please let me know how to do this.
Thanks,
Anilkumar

Anilkumar
Your request to export import single DC from one track to another is unusual.
It is usually SCs that needs to be moved.
Explanation:
The SAP approach to the software development is that you create SCs and develop DCs inside these SCs. DCs stays within their SCs for good.
If another DC(1) needs to use original DC(0) then:
- if DC(1) is in the same SC and DC(0), than DC(1) uses DC(0) via pub parts
- if DC(1) is in SC(1) and DC(0) is in SC(0) (same or different track - des not matter), SC(1) should declare SC(0) as required. SC(0) should be imported to the same track as SC(1).
There is never a need for DC to jump between SCs, because it makes it impossible to make any sense of version tracking and dependencies after that.
If you need an entire SC with all the DCs to come over to another track, there are two ways:
- create a new track and import assembled SC;
- copy old track to new track and import assembled SC
It has been discussed several times in forum like this:
Re: Copying a track in JDI
Regards,
Slava

Has anyone notice that since the new update it's impossible to edit a text, then forward it to another party. I hate having to not able to do so. *****!

Has anyone notice that since the new update it's impossible to edit a text from the sent message, then forward it to another person. *****!

No, it's not. Tap an hold on the message you want to forward. Tap on "More" in the pop up box. Tap on the foward arrow in the lower right. Edit as neccessary.

Used Dc dependency from one Track to another Track

Hi All,
Can you give me some solution for my scenario.
1) I have imported two tracks Track1 and Track2 from the server and created project locally from Inactive DCs.
2) I have already existing DC1 from SC1->Track1 and also i have another track Track2-->SC2. In SC2 i have created new dc DC2.DC2 is still in both Inactive DCs only.
3) I need to use DC1 as used dc in DC2.
4) when i tried to do Used Dc from DC2, i cannot able to see Track1 SCs and DCs, only Track 2 is visible.
Can you please provide some steps or documents for me to proceed further, it will be very helpful for me.
Can you tell how can add Public Part and Used DC.
Thanks & Regards,
Suresh T

To get this working you'll need to do the following after following Slava's steps: Set up a transport connection (in CMS Landscape Configurator) from Track 1 to Track 2, so that SC1 becomes available in Track 2. You can import SC1 into Track 2 after it has been Approved in Track 1.
Note that the following step that Slava mentioned should not be done manually: "Add SC1 to Requirement components in SC2 track." After the Update CMS procedure, you should click the Synchronize SC Dependencies button in Track 2. This should automatically add SC1 to the Required Components table.

Copy custom code from one track to another track

How can we copy only new code from one track to another track. We don't want to merge the other DCs exisitng between 2 tracks. Is it possible through track connection? Pls give your valuable suggestions.
Thanks,
Santha

HI,
you just want to copy new code?
i really dont understand this question.
but as per my understanding
1. you can copy a whole track..through track connection.
2. You can do one thing if just want to copy new code, use NWDS and copy new changes into other tracks DC. it will be good.
3. there is option for workspace comparision and integration. think of it, if suitable.

Automation data copied to another track?

I like the way I automated a track, and want to used that exact "volume" automation on the next track below in my arrange menu. Is there a way to copy/paste kind of process here to recreate this on another track?

Prior to Logic 7, Logic included an Automation Folder. This was basically an arrange page, that had all the automation in your song viewed as if they were audio or MIDI regions. You could easily option/drag automation from one track to another this way.
There is a way to it in version 7... read about it here:
http://community.sonikmatter.com/forums/lofiversion/index.php/t21249.html
I have my automation folder available as a screenset.
Once set up, this is probably the quickest way to achieve what you're wanting. However, I have also used the method mentioned above, where you drag the region, and Logic asks if you want to copy it (as long as you have "Ask" selected in your Track Automation Preferences).
Then just delete the copied region, and tell Logic not to delete the automation data.
Do look into the automation folder though. It allows you to move and copy automation data, just like you do audio and MIDI regions.

Quicktime Chapter and Text Tracks

Hello,
I've got loads of video that I would like to subtitle and add chapters. It has taken me more then a week to complete the above task with a 20 minute video with iMovie (not counting the previous week of work lost when iMovie somehow mangled the video beyond recognition [save more often!].)
Needless to say, I'm looking for alternative methods that might make things easier to revise without having to worry about re-rendering everytime I make a revision.
Quicktime Pro does have the ability to add Chapter and Text tracks (that can be used for subtitling).
Will a Quicktime 7 file with a text track and a chapter track added to an iDVD (HD) project inherit the chapter markers and subtitles? (I really don't mind if the subtitles are always displayed.)
I'll probably try the above with a test file, but I was hoping that someone could let me know if it'll be wasted effort?
Thanks.

I've done a few tests and it appears that it does not import the chapters or text tracks.
Oh well, back to iMovie.

Moving DC from one Track to another track in NMDI??

Hi,
we need a hint if (and, of course, which way) we can move a DC between two tracks in NWDI??
I had developed a DC in the wrong track, so i have to move it to another.
It is a WebDynpro-Project...
Regards
Bernhard

hi,
between tracks you can transport SCs (by transporting them with the CMS - with the 'forward' button) but in your case in both tracks should be defined the SC which contains the DC, and after u transport the SC, you should delete the DC in the source track
more tricky is if you want to move a DC from SC to SC, because when u try to create the DC in the new compartment, the SLD will fail with error like "dc name exists", and in this case you can use the dctool which can be found in the NWDS/eclipse/tools/dc/
N.B! - if you transport a SC between tracks, all other changes made in this SC in the source track ll be transported also to the target track
hmm, there's another way, if you can remember the activities which creates this DC, and if their imports into "Consolidation" don't contain other activities (if the activities for the DC are not released together with other acts), you can use the cmstool (NWDS/eclipse/tools/cmstool) to transport only these activities, but you should not use this if these activities have predecessors.
and remember that for these transports you need cms transport permissions & checkin dtr permissions
best regards
atanas

Passing elements to another track

Hello all!!
I have a doubt because we have two tracks in our Dev environment, and we need to pass some element from one track to another. How can this be performed??.
Regards IA

Armando,
As your development components are part of a software component, you can transport this component from one track to an other track manually from the 'Approval'-tab of your CMS.
Click the "Go to History" button in this tab, select the appropriate software component and click de "Forward..." button.
Select in the pop-up in the dropdown your target track and click the "Forward" button.
Hope this helps,
regards,
Alain

Unity Connection 8.6.2 Forward vm to another email address

Hey team!
I have employees that I want the ability to forward voicemails to an outside email address such as [email protected]
I do this currently for the users that I have NOT migrated from Unity to Unity connection. The way i do it for Unity users is i create a dummy AD account that is the users 10 digit phone number. On that dummy AD account I click on the exchange general tab then click delivery options. I then set the forwarding address to something else such as [email protected]
I want to get away from creating these dummy AD accounts.
In Unity Connection is there a setting that will allow me to create a user in connection but set a relay of that voicemail to another email domain?
I have about 150 users that I would like to make this work for.
Any insight is greatly appreaciated.
Del

I think I have found what I am looking for.
http://www.netcraftsmen.net/component/content/article/70-unified-communications/695-voicemail-only-voicemail-relay-and-integrated-messaging-options-with-unity-connection.html

Forward Chapter to another track

Similar Messages

Maybe you are looking for