Forward key on 17 inch PB not working. Please advise.

I've looked everywhere but can't seem to find a fix for this:
The forward (end) key will no longer advance the cursor letter by letter. However, using option plus the forward key will advance the cursor to the end of the word. This means that the key mechanism itself is fine, but remapping of the key may have happened.
Any tips for correcting this?
Thanks,
Dave
(17 inch Powerbook)
17 inch PB G4   Mac OS X (10.4.6)  

Well,
Unfortunately you may have to kiss your data goodbye. But before giving up, you may be able to recover from such a situation first by:
1. Checking with an authorized service center if your clock battery needs replacing.
2. If the clock battery is good, try zapping the PRAM:
http://docs.info.apple.com/article.html?artnum=2238
3. If nothing results of 3, purchase a Firewire hard drive at least the size of your internal drive from http://www.macsales.com/ and Filesalvage:
http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
And attempt recovery to that drive after formatting the external drive with Disk Utility from your installer. If you have another Mac, you can also attempt to hook it up as an external hard drive by setting the Powerbook in Target Disk Mode:
http://docs.info.apple.com/article.html?artnum=58583
4. If Filesalvage doesn't find anything, you can try Prosoft Data Rescue II:
http://www.prosofteng.com/
5. Now while Alsoft Disk Warrior isn't a data recovery application, it can sometimes repair the directory so that files become visible again. Version 4.1 is the latest and is from here:
http://www.alsoft.com/
If neither 3 nor 4 nor 5 works, you may have to take the machine to a data recovery specialist. Unfortunately these can cost thousands of dollars.
And never forget to backup your data again*:
http://www.macmaps.com/backup.html
It isn't a question of if but when.
Good luck!
- * Links to my pages may give me compensation.

Similar Messages

  • G4-450 DP with a 22 inch clear Cinema display will not work, please advise

    Hello all
    I can not seem to get a G4-450 DP to work with a 22 inch clear Cinema display, i even have one of those dr.botts wich i normaly run a 2nd 15" clear display.
    What happens is that it starts up and then goes black,
    can anyone advise?

    Hi-
    Could you check your system profiler for graphics, and post the model of the card that you have? The stock card is the Rage 128 with the following specs:
    -ATI RAGE 128 Pro graphics card with 16MB of SDRAM graphics memory installed in a dedicated AGP 2X graphics slot
    -Support for up to 1920– by 1200–pixel resolution at 32 bits per pixel (millions of colors)
    -Apple Display Connector (ADC); carries analog and digital video, USB, and power
    -15–pin mini D–Sub VGA connector
    You say you have a DVI port (along with ADC) so, I want to clarify the card model.
    You also state that the display worked once- in what configuration? Connected alone? Through the Dr. Bott's DVIator? That means from the DVI port to an ADC connector on the screen (but the 22" is a DVI connection)?
    I found the following quote on the Dr. Bott's page:
    However, the ATI Rage 128 card will not work with the 20", the 22" and the 23" Cinema Displays
    To clear up confusion (mine), please carefully check your profiler, compare the ports of your card to the Display compatibility link (in above post), and let me know the results (what you have), along with a description of what connects to what. A model number for the display would also help.
    Generally speaking, when a display goes black after the gray screen, the graphics card isn't compatible, or the necessary software/drivers are not installed.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

  • Quicktime simply does not work, please advise!

    Howdy folks,
    There must be something wrong with my Macbook Pro Version 10.6.2, perhaps its too old to allow QuickTime to work? Maybe I need to buy another Macbook thats more up to date?
    When I open QuickTime player from the Applications folder, it appears in my dock, but nothing else happens. There is no window that actually allows me to do anything with QuickTime. This could be normal, but I am not sure.
    I've been trying to play this movie: http://club2009.upa.org/videos/open-finals for a while now and all that happens is the QuickTime logo appears where the video should be playing. I followed the link at the bottom that says something like 'Problem viewing videos? Download latest QuickTime player'. So I downloaded the latest QuickTime player from the site and during the installation, this message appears:
    'QuickTime can't be installed on this disk. This version of QuickTime 7 can't be installed on this disk because QuickTime X is already present. Please us Software Update to install the appropriate version of QuickTime for your Mac.'
    This is quite frustrating. Please help!
    Many thanks, in advance.

    Sloppy html page code and older codecs may be getting in the way:
    http://video.upa.org/videos/club2009/Club09FinalOpenRevolverVsChain.mov
    It's a huge file but it opens and works for me when I copy/paste the URL (above) into the Open URL dialog window of QuickTime X and 7.6.6 (requires Snow Leopard 10.6.3).
    Run Software Update on your machine.

  • Certain symbol fonts installed but not working, please advise

    I'm trying to edit an entire website in Flash that uses Zapf Dingbats font symbols. I had upgraded my computer since last working on the website and had not re-installed the font, so I did so with my copy of the font suitcase. FontBook installs and displays it correctly, but no applications on my Mac will display the font properly—when I select it, I just get regular alphabetic characters. I tested some other fonts and found another that does the same thing: Apple Symbols, which was pre-installed on my computer. I tried restarting to no avail.
    What could be causing these fonts not to work properly? Thanks in advance!

    Oh thank you so much for this tip! It does work to insert symbols from all the various fonts that offer them, but it doesn't explain why one can no longer choose Dingbats from the font menu and type the various characters, nor why all my Zapf Dingbats symbols in all my Flash animations now show up as "+" symbols (and Flash warns me that Zapf Dingbats is not installed on my system when opening the files, even though it is).
    However, your tip has allowed me to find the symbol I need in Pages, then copy and paste it into Flash. I will have to replace dozens and dozens of instance of this symbol in my Flash files, but at least it works!
    Thanks again for taking the time to help.

  • Im living in qatar using ooredoo network and the 4g on my iphone 5 is not working please advise

    4g on my iphone 5 is not wokring im living in qatar and im using ooredoo network please advise

    Look at the page I linked to. It's possible it's out of date, but just because they have LTE does NOT mean that they currently support LTE on the iPhone.
    IF they do, the question becomes 'where EXACTLY' did you get the phone?
    If it came from another region, for example, the US, it may not be compatible with the LTE network you're trying to use.

  • Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

    I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • Convenience Key on my Torch does not work

    Hi Everyone!
    Seek your help as the convenience key on my torch does not work. I have changed the setting as well but to no avail.
    Regards - Nitin
    Solved!
    Go to Solution.

    Hi just an update to the problem of the convenience key not working or working now and again. I had to do a couple of reboots this morning to update some apps and I noticed the key was not working after the reboot so I attached the charging cable to the phone and plugged into the wall socket thinking that will fix it again, but no it didnt. !!! I then remembered the first time I had this sorted I had plugged the charger in and switched the power on and then attached the phone, so I tried this method again and the key is working fine again!!!!. So what ever is happening when you do it in this sequence seems to reset the key. How did you get on with your phone with the Blackberry info?

  • Number keys 1 thru 3 are not working

    number keys 1 thru 3 are not working, so I am unable to unlock my iphone.

    I went ahead and lock myself out from the password screen.  Waited the allotted time.  Now all numbers work.  Thanks for your input

  • 7 key of alphanumeric keypad is not working on Nok...

    Hi Forum;
    I am facing this issue today. The '7' key of alphanumeric keypad is not working properly. On my Nokia 5800 Xpress Music. I am anuable to write character q and r. When ever I press it, it either prints p or 7. But it does not print q and r.
    I soft reset my phone. But the problem resumes. Its annoying. As I cant type.
    People, please suggest some solution for it.
    I will be thankful to you.
    Solved!
    Go to Solution.

    Yes, It is very annoying. In writing sms when I presse key 8 for t,u or v. 7 automatically pressed and it got the glow effect too. As if I pressed it too. Its really annoying. I like my phone but its driving me crazy. its out of warrenty. I have upgraded its firmware to v51 too. If it improve. But it doesnt.
    And I think I should remove the protector screen. As I am having it since I bought this phone. I really should see if I can fix its issue from Nokia or sale it.
    jheel_online I did changed its orientation. The spot has issue. When in landscape mode when i press p the dot (.) also pressed.

  • Launchpad key board shortcut not working please help me

    My launchpad keyboard shortcut not working please anybody help me...

    Hello, did it work in the past? Is the key you chose in use by another shortcut?
    http://www.cultofmac.com/208908/easily-access-launchpad-with-a-keyboard-shortcut -os-x-tips/
    http://imagineric.ericd.net/2011/07/21/keyboard-shortcut-to-launchpad-on-os-x-li on/
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • Why do some keys on my IPhone 4S not work in the vertical position?

    Why do some keys on my Iphone 4S not work in the vertical position?

        Let's get to the bottom of this issue mike4820! What specific keys are not working properly while in vertical position? This is more likely the result of some display settings or an application installed on your phone. Please ensure that you have the latest iOS version installed (7.1).
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Some keys on my MacBook are not working

    Some keys on my MacBook are not working. For example, the "b" is not working. But when I turn on capslock it will type "B". Any ideas???

    Try resetting your SMC and tell me if that works     http://support.apple.com/kb/HT3964

  • HT5569 im trying to connect my ipad to my bt home hub put in wireless key pass code but still not working

    im trying to connect my ipad to my bt home hub put in password still not working please help

    Reboot your router by unplugging it for a couple of minutes, then try it again.

  • IPhone 6 pin or fingerprint not working please help me asap

    i phone 6 pin and finger print not working please help

    Howdy Karan sood,
    Welcome to Apple Support Communities.
    It sounds like you’re running into an issue unlocking your iPhone because Touch ID and passcode aren’t being accepted.
    Take a look at the article linked below, it provides troubleshooting suggestions that’ll resolve most Touch ID issues.
    Use Touch ID on iPhone and iPad - Apple Support
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    And, this article provides tips that’ll help resolve passcode issues.
    iOS passcodes - Apple Support
    Forget your passcode?
    If you or someone else enters the wrong passcode too many times, your device will disable itself temporarily. Get help if you forgot your passcode or your device is disabled.
    Learn what to do if you forgot your Restrictions passcode.
    I hope this helps,
    -Jason

Maybe you are looking for

  • F-54 Balancing field "Profit Center" in line item 002 not filled  Message no. GLT2201

    Hi, During F-54 error "Balancing field "Profit Center" in line item 002 not filled" "Message no. GLT2201"  showing. I have gone through previous posts with  message no. I got below solutions but those applicable belongs to EHP 600 but ours is EHP 605

  • Redirecting control to portal page after exiting from SAP R/3 transaction

    Hai, In my portal Top Level Navigtion, I have two Option, "HOME", "HR FUNCTION". When a user login to portal by default the first node "Home" is opened and its content is opened in detailed navigation. Then the first content from detailed navigation

  • Address Book synching only half-works

    My iPod Classic seems unable to keep straight which addresses and phone numbers are "home" and which ones are "work", and, though my older iPod Photo could do it, does not seem able to transfer information from the "Notes" field. Is there any solutio

  • Viewing PDF with Controls on Android

    I tried to use the controls in the pdf and i couldnt play or control frame by frame. Can anyone help suggest any extensions into PDf that can allow PDF to play such document in android? or rather an alternative that can be used.

  • Load images with some effects

    Hi, I wanted to load java images with some effects like we have in power point like blinds or appear in Java swing when user clicks on the image. I have these specific questions in mind: 1.Is there a way to do this in Java? 2.Also how will this behav