~/.forward problem on Solaris 2.5.1
I've developed a program that is kicked off by receiving an e-mail from another system and am using the ~/.forward file to start my program.
My ~/.forward file looks like:
\jtw, "| /apps/tpg/bin/parse_mail"
When I received mail from the system that is supposed to start my program, I get the message in my mail reader, but my program is not started. If I create a new message and send it to myself with the contents of the original message, it works!
I'm using Solaris 2.5.1. When I issue the '/usr/lib/sendmail -d0.1 -bt </dev/null' command I get the following output:
Version 8.8.8+Sun
Compiled with LOG MATCHGECOS MIME7TO8 MIME8TO7 NAMED_BIND NDBM NETINIT NETUNIX NIS NISPLUS QUEUE SCANF SMTP XDEBUG
===========SYSTEM IDENTITY (after readcf)========
(short domain name) $w=ultra-05
(canonical domain name) $s=ultra-05
(subdomain name) $m=<null>
(node name) $k=ultra-05
Also, the system that is sending the e-mail to me is addressing me as: ULTRA-05@<IPAddress>
I've created the /etc/mail/sendmail.cw file with the entry for <IP Address> and added an entry in /etc/mail/aliases of 'ultra-05:jtw' so that it gets to my actual user account "jtw".
I've been struggling with this for weeks and figure out why I I can send the message to myself, but can't receive it from the other system (BTW: the other system is Win2k, if that makes a difference).
Any ideas would be greatly appreciated. If you need more info, I'll be glad to provide it, just tell me what you want.
Thanks,
Tim Anderson
Follow on Information:
I looked in /var/spool/mqueue and found several qf and df files. One of the df files contained the following:
This is a MIME-encapsulated message
--PAA16295.1027204109/ultra-05
The original message was received (date & time omitted) from [transmitter's IP address]
---The following addresses had permanent fatal errors-----
"| /apps/tpg/bin/parse_mail"
(expanded from: jtw)
----Transcript of session follows-------
sh: /apps/tpg/bin/parse_mail : cannot execute
554 "| /apps/tpg/bin/parse_mail" ... unknown mailer error 1
--PAA16295.1027204109/ultra-05
Content-Type: message/delivery-status
I have already tested that I can run the parse_mail program from sh and it works fine.
Similar Messages
-
Content Server 6.0 Installation problem on Solaris
When I installed Content_Server_6.0_SP1_solaris_oracle on Solaris 10 ,I get the following error in log file.
dbg Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed.
How can I resolve it
please help me.
Regards
SandeepIf I installed any installer for sparc Machine on x86.is there any problem.My Solaris machine is x86.
thanx.
Regards
Sandeep. -
Focus Problem on Solaris with jdk 1.3.1
Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
if (a == null) return b;
if (b == null) return a;
return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
if (oldl == a) return b;
if (oldl == b) return a;
java.util.EventListener a2 = removeInternal(a, oldl);
java.util.EventListener b2 = removeInternal(b, oldl);
if (a2 == a && b2 == b)
return this;
return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
if (l == oldl || l == null)
return null;
if(l instanceof PenHesapLisEventMulticaster)
return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).tamam_actionPerformed(newEvent);
((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).iptal_actionPerformed(newEvent);
((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
protected transient PenHesapListener PenhListener = null ;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus2()
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
fireTamam_actionPerformed(e);
public void addPenHesapListener(PenHesapListener newListener)
PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
return;
protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
PenhListener.tamam_actionPerformed(newEvent);
this.setVisible(false);
protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
PenhListener.iptal_actionPerformed(newEvent);
public static void main(String x[])
TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
PenKreKart aPenKreKart = null ;
Container ctn = null;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JTextField f2 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus()
//aPenKreKart = new PenKreKart(true);
//aPenKreKart.aTemelPencere.setVisible(false);
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(f2);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
pencere_islemi();
// pencere koyma k?sm? .. begin
public void pencere_islemi() {
ctn = this;
ctn.setEnabled(false);
TestFocus2 fpen = new TestFocus2();
//aPenKreKart.aTemelPencere.setVisible(true); //buras?
//aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
fpen.addPenHesapListener(new PenHesapListener() {
// metod tamam_actionPerformed begin...
public void tamam_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
// Problem is when we comment the below line it works .....
f1.requestFocus();
System.out.println("tamam");
// metod tamam_actionPerformed end...
// metod iptal_actionPerformed begin...
public void iptal_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
System.out.println("iptal");
// metod iptal_actionPerformed begin...
// pencere koyma k?sm? .. end
public static void main(String x[])
TestFocus gen01 = new TestFocus();Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
if (a == null) return b;
if (b == null) return a;
return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
if (oldl == a) return b;
if (oldl == b) return a;
java.util.EventListener a2 = removeInternal(a, oldl);
java.util.EventListener b2 = removeInternal(b, oldl);
if (a2 == a && b2 == b)
return this;
return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
if (l == oldl || l == null)
return null;
if(l instanceof PenHesapLisEventMulticaster)
return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).tamam_actionPerformed(newEvent);
((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).iptal_actionPerformed(newEvent);
((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
protected transient PenHesapListener PenhListener = null ;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus2()
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
fireTamam_actionPerformed(e);
public void addPenHesapListener(PenHesapListener newListener)
PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
return;
protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
PenhListener.tamam_actionPerformed(newEvent);
this.setVisible(false);
protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
PenhListener.iptal_actionPerformed(newEvent);
public static void main(String x[])
TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
PenKreKart aPenKreKart = null ;
Container ctn = null;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JTextField f2 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus()
//aPenKreKart = new PenKreKart(true);
//aPenKreKart.aTemelPencere.setVisible(false);
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(f2);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
pencere_islemi();
// pencere koyma k?sm? .. begin
public void pencere_islemi() {
ctn = this;
ctn.setEnabled(false);
TestFocus2 fpen = new TestFocus2();
//aPenKreKart.aTemelPencere.setVisible(true); //buras?
//aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
fpen.addPenHesapListener(new PenHesapListener() {
// metod tamam_actionPerformed begin...
public void tamam_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
// Problem is when we comment the below line it works .....
f1.requestFocus();
System.out.println("tamam");
// metod tamam_actionPerformed end...
// metod iptal_actionPerformed begin...
public void iptal_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
System.out.println("iptal");
// metod iptal_actionPerformed begin...
// pencere koyma k?sm? .. end
public static void main(String x[])
TestFocus gen01 = new TestFocus(); -
Metainit/striping problem on Solaris 9
We are trying to deploy the Apple XServe RAIDS to customers running Solaris 9. The issue is that Solaris 9 will not recognize a device/LUN that is > 2TB. (No problem with Solaris 10) In trying to solve this problem, we sliced a 7 disk (4.09 TB) RAID into 3 slices. This presents three 1.36TB disks to the Solaris system. Basically, we have 6 disks being presented across both controllers to Solaris. They are direct connected from the XServe to a dual port QLogic HBA. The problem comes in when you try to create a stripe/concatenation across the logical devices being presented. (The disks are being presented on C4 and C5)
Results from a format AFTER I split both 7 disk RAID5s into 3 slices.
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@1,0
2. c1t2d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@2,0
3. c1t3d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@3,0
4. c4t600039300001F461d0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,0
5. c4t600039300001F461d1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,1
6. c4t600039300001F461d2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,2
7. c5t600039300001F2ECd0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,0
8. c5t600039300001F2ECd1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,1
9. c5t600039300001F2ECd2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,2
Specify disk (enter its number):
Results of the cfgadm command. You will see there three logical devices presented to each controller. Six disks.
cfgadm -al -o showFCPdev
Ap_Id Type Receptacle Occupant Condition
c4 fc-private connected configured unknown
c4::600039300001f461,0 disk connected configured unknown
c4::600039300001f461,1 disk connected configured unknown
c4::600039300001f461,2 disk connected configured unknown
c5 fc-private connected configured unknown
c5::600039300001f2ec,0 disk connected configured unknown
c5::600039300001f2ec,1 disk connected configured unknown
c5::600039300001f2ec,2 disk connected configured unknown
Trying to initialize a 6 device stripe via Solaris Volume Manager (AKA disksuite)
metainit -f d77 6 1 c4t600039300001F461d0s0 1 c4t600039300001F461d1s0 1 c4t600039300001F461d2s0 1 c5t600039300001F2ECd0s0 1 c5t600039300001F2ECd1s0 1 c5t600039300001F2ECd2s0
I receive the following error:
metainit: hostname: c4t600039300001F461d1s0: overlaps with device in d77
I tried to do a work around where I create three striped devices then concatenate them:
Creating the first 2 device stripe across controllers c4 and c5 (1 device each)
metainit -f d77 2 1 c4t600039300001F461d0s0 1 c5t600039300001F2ECd0s0
I was able to create the first metadevice d77 using one logical LUN from each controller.
When I tried to create a second metadevice across the controllers: (Using d1 from each controller)
metainit -f d78 2 1 c4t600039300001F461d1s0 1 c5t600039300001F2ECd1s0
metainit: hostneme: c4t600039300001F461d1s0: overlaps with device in d77
I received the same error.
In doing some reaearch, it seems the problem is due to a problem with the disk duplication process, disk device IDs stored on the disks are not unique. I was curious if this is the problem that Apple presents the split disks with the SAME diskid? Has anybody else successfully created stripes (due to a LUN size limit) across the disk successfully on a Solaris system?I contacted Sun and here is an explination from them. I also noticed when I queried the Xserver RAIDS, there were no serial numbers.
Solaris 9 can support a 16Tb filesystem, but there is a scsi limitation on the device of 2Tb. So you are stuck with striping together several smaller devices if you want a single filesystem above 2Tb.
The problem you are having when metainit reports an overlap comes from the way Solaris Volume Manager identifies devices. The portion of the scsi inquiry that is returned is always unique when Sun firmware is involved, but in your case is not unique.
You may be able to make use of the appended infodoc to avoid this problem. I see no evidence of our having tested this with your particular scenario, but it has been successful in similar cases.
You might also inquire of whoever supports your storage device whether a mode is supported whereby the device's inquiry strings can be made unique.
Here is the steps he wanted me to take and the results. I still can not get the Xserve RAIDS to generate a unique device id:
Step 1
Determine the vendor and product strings. You can run these commands:
# netstat -k | grep -i vendor
# netstat -k | grep -i product
netstat -k | grep -i vendor
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
grep -i product
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
or you can run
# format -e
then select scsi, then inquiry.
scsi> inq
Inquiry:
00 00 05 12 5b 00 00 02 41 50 50 4c 45 20 20 20 ....[...APPLE
58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 Xserve RAID
31 2e 35 31 63 00 00 00 00 00 00 00 00 00 00 00 1.51c...........
00 00 00 00 00 00 00 00 00 00 0d 40 0d a0 0e 20 ...........@...
0d 80 09 00 0a 00 00 20 00 00 00 20 20 20 20 20 ....... ...
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Vendor: APPLE
Product: Xserve RAID
Revision: 1.51
Removable media: no
Device type: 0
ISO version: 0
ECMA version: 0
ANSI version: 5
Async event notification: no
Terminate i/o process msg: no
Response data format: 2
Additional length: 91
Relative addressing: no
32 bit transfers: no
16 bit transfers: no
Synchronous transfers: no
Linked commands: no
Command queueing: yes
Soft reset option: no
Step 2
Add an entry in the file '/kernel/drv/sd.conf'.
sd-config-list=
"APPLE Xserve RAID ", "AppleRAID";
AppleRAID=1,0x8,0,0,0,0,0;
Step 3 Reboot.
Step 4 Check with SUNWexplo.
[email protected]:[/opt/SUNWexplo/bin] (8)# ./diskinfo.sparc
/dev/rdsk/c0t0d0s2: Device busy
AVAILABLE SCSI DEVICES:
Location Vendor Product Rev Serial #
c1t0d0 COMPAQ BD036863AC HPB5 B2FT4HMM
c1t1d0 SEAGATE ST336607LSUN36G 0507 0349A66VKQ
c1t2d0 SEAGATE ST373307LSUN72G 0507 0417B7C9ZC
c1t3d0 SEAGATE ST373307LSUN72G 0507 0425B7LV5Q
c4t600039300001F461d0 APPLE Xserve RAID 151 c
c4t600039300001F461d1 APPLE Xserve RAID 151 c
c4t600039300001F461d2 APPLE Xserve RAID 151 c
c5t600039300001F2ECd0 APPLE Xserve RAID 151 c
c5t600039300001F2ECd1 APPLE Xserve RAID 151 c
As you will notice, there are no serial numbers in this command or netstat -k | grep -i product commands. -
Fast forward problems with Zen Touch (1.01.03 AND PlayForSu
Device: Zen Touch
Firmware: .0.03
Some files cause fast forward problems. Suppose I fast forward to the end of the song. Then I reach the - 00:00.00 marker. HOWEVER, the song goes on and on. It doesn't stop, even if it should (these files aren't corrupt, they work properly on my pc). For e.g. this file causes problems: http://www.hollywoodsaloon.com/podcast/THS-ep9.mp3 and this file http://meandawg.com/audio/MDTop5_0002.mp3.
Anyone know if this is a common problem, and can I fix this by installing the playforsure firmware?Message Edited by Nicos on 07-27-200703:42 AM
Message Edited by Nicos on 07-27-200703:43 AM
Message Edited by Nicos on 07-27-200703:43 AM
Message Edited by Nicos on 07-27-200707:22 AMI just upgraded the firmware and it didn't help =(
Is there anyone who has the same problem? Maybe someone of you can download these files and try to ffwd to the end with a Zen Touch.Message Edited by Nicos on 07-27-200707:44 AM
Message Edited by Nicos on 07-27-200708:00 AM -
Rsh disconnect problems in Solaris 10
My company uses rsh to transmit data to proprietary cards, from Ultra 25's running Solaris 10. We're experiencing random timeouts. The error is rsh connection timeout.
We never had this problem on Solaris 8 or Solaris 7.
Has anyone run across this before? It's to random to run snoop on. Thanks Marktype passwd mgcusr as root. then you'll need to type new password for that user.
-
Problems with Solaris 11 11/11
Hi,
I need your help because I have problems with Solaris 11 11/11 installed in a Dell Latitude E4310.
Here, there are the problems:
1- No it power off with shutdown or init 5 or init 0 only work well the reboot.
2- It can not connect to the wifi with wpa, no receive ip by dhcp, the driver of the card is "iwp"
Thanks.
Jorge
Edited by: jdangelo on Nov 16, 2011 1:49 PM
Edited by: jdangelo on Nov 17, 2011 2:51 PMHere is the info of my laptop;
Manufacture name:Dell Inc.
Manufacture model:Latitude E4310
64 Bit:True
OS version:SunOS solaris 5.11 11.0 i86pc i386 i86pc
CPU Type:Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
CPU Number:1
Number Of Cores Per Processor:2
Number Of Threads Per Processor:4
Bios/Firmware Maker:Dell Inc. Version:A05 Release Date:11/20/2010
prtconf -pv:
System Configuration: Oracle Corporation i86pc
Memory size: 3958 Megabytes
System Peripherals (PROM Nodes):
Node 0x000001
bios-boot-device: '80'
stdout: 00000000
name: 'i86pc'
Node 0x000002
existing: 00c21000.00000000.02bc6001.00000000
name: 'ramdisk'
Node 0x000003
acpi-namespace: '\_SB_.PCI0'
compatible: 'pciex_root_complex'
device_type: 'pciex'
reg: 00000000.00000000.00000000.00000000.00000000
#size-cells: 00000002
#address-cells: 00000003
name: 'pci'
Node 0x000004
reg: 00000000.00000000.00000000.00000000.00000000
compatible: 'pci8086,44.1028.410.2' + 'pci8086,44.1028.410' + 'pci1028,410' + 'pci8086,44.2' + 'pci8086,44' + 'pciclass,060000' + 'pciclass,0600'
model: 'Host bridge'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00060000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000044
name: 'pci1028,410'
Node 0x000005
acpi-namespace: '\_SB_.PCI0.VID_'
assigned-addresses: 83001010.00000000.f0000000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.000060b0.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
compatible: 'pci8086,46.1028.410.2' + 'pci8086,46.1028.410' + 'pci1028,410' + 'pci8086,46.2' + 'pci8086,46' + 'pciclass,030000' + 'pciclass,0300'
model: 'VGA compatible controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
device_type: 'display'
unit-address: '2'
class-code: 00030000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000046
name: 'display'
Node 0x000006
acpi-namespace: '\_SB_.PCI0.GLAN'
assigned-addresses: 8200c810.00000000.f5400000.00000000.00020000.8200c814.00000000.f5480000.00000000.00001000.8100c818.00000000.00006040.00000000.00000020
reg: 0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10ea.1028.410.5' + 'pci8086,10ea.1028.410' + 'pci1028,410' + 'pci8086,10ea.5' + 'pci8086,10ea' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '19'
class-code: 00020000
revision-id: 00000005
vendor-id: 00008086
device-id: 000010ea
name: 'pci1028,410'
Node 0x000007
acpi-namespace: '\_SB_.PCI0.EHC2'
assigned-addresses: 8200d010.00000000.f5470000.00000000.00000400
reg: 0000d000.00000000.00000000.00000000.00000000.0200d010.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b3c.1028.410.5' + 'pci8086,3b3c.1028.410' + 'pci1028,410' + 'pci8086,3b3c.5' + 'pci8086,3b3c' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1a'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b3c
name: 'pci1028,410'
Node 0x000008
acpi-namespace: '\_SB_.PCI0.HDEF'
assigned-addresses: 8300d810.00000000.f5460000.00000000.00004000
reg: 0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
compatible: 'pciex8086,3b57.1028.410.5' + 'pciex8086,3b57.1028.410' + 'pciex8086,3b57.5' + 'pciex8086,3b57' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,3b57.1028.410.5' + 'pci8086,3b57.1028.410' + 'pci1028,410' + 'pci8086,3b57.5' + 'pci8086,3b57' + 'pciclass,040300' + 'pciclass,0403'
model: 'Mixed Mode device'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1b'
class-code: 00040300
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b57
name: 'pci1028,410'
Node 0x000009
acpi-namespace: '\_SB_.PCI0.RP01'
slot-names: 00000001.746f6c53.00003333
reg: 0000e000.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b42.5' + 'pciex8086,3b42' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b42.5' + 'pci8086,3b42' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00005000.81000000.00000000.00005000.00000000.00001000.82000000.00000000.f4000000.82000000.00000000.f4000000.00000000.01400000
bus-range: 00000001.00000001
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000000
devsel-speed: 00000000
interrupts: 00000001
unit-address: '1c'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b42
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b42'
Node 0x00000a
acpi-namespace: '\_SB_.PCI0.RP02'
slot-names: 00000001.746f6c53.00003433
reg: 0000e100.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b44.5' + 'pciex8086,3b44' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b44.5' + 'pci8086,3b44' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00004000.81000000.00000000.00004000.00000000.00001000.82000000.00000000.f2c00000.82000000.00000000.f2c00000.00000000.01400000
bus-range: 00000002.00000002
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000001
devsel-speed: 00000000
interrupts: 00000002
unit-address: '1c,1'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b44
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b44'
Node 0x000013
acpi-namespace: '\_SB_.PCI0.RP02.PXSX'
assigned-addresses: 83020010.00000000.f2c00000.00000000.00002000
reg: 00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00002000
compatible: 'pciex8086,422c.8086.1321.35' + 'pciex8086,422c.8086.1321' + 'pciex8086,422c.35' + 'pciex8086,422c' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,422c.8086.1321.35' + 'pci8086,422c.8086.1321' + 'pci8086,1321' + 'pci8086,422c.35' + 'pci8086,422c' + 'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00008086
subsystem-id: 00001321
unit-address: '0'
class-code: 00028000
revision-id: 00000035
vendor-id: 00008086
device-id: 0000422c
name: 'pci8086,1321'
Node 0x00000b
acpi-namespace: '\_SB_.PCI0.RP03'
slot-names: 00000001.746f6c53.00000038
reg: 0000e200.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b46.5' + 'pciex8086,3b46' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b46.5' + 'pci8086,3b46' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00003000.81000000.00000000.00003000.00000000.00001000.82000000.00000000.f1800000.82000000.00000000.f1800000.00000000.01400000
bus-range: 00000003.00000003
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000002
devsel-speed: 00000000
interrupts: 00000003
unit-address: '1c,2'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b46
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b46'
Node 0x000014
acpi-namespace: '\_SB_.PCI0.RP03.PXSX'
assigned-addresses: 82030010.00000000.f1830000.00000000.00000100
reg: 00030000.00000000.00000000.00000000.00000000.02030010.00000000.00000000.00000000.00000100
compatible: 'pciex1180,e822.1028.410.1' + 'pciex1180,e822.1028.410' + 'pciex1180,e822.1' + 'pciex1180,e822' + 'pciexclass,080500' + 'pciexclass,0805' + 'pci1180,e822.1028.410.1' + 'pci1180,e822.1028.410' + 'pci1028,410' + 'pci1180,e822.1' + 'pci1180,e822' + 'pciclass,080500' + 'pciclass,0805'
model: 'SD Host controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00080500
revision-id: 00000001
vendor-id: 00001180
device-id: 0000e822
name: 'pci1028,410'
Node 0x00000c
acpi-namespace: '\_SB_.PCI0.RP04'
slot-names: 00000001.746f6c53.00000039
reg: 0000e300.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b48.5' + 'pciex8086,3b48' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b48.5' + 'pci8086,3b48' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.f0400000.82000000.00000000.f0400000.00000000.01400000
bus-range: 00000004.00000009
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000003
devsel-speed: 00000000
interrupts: 00000004
unit-address: '1c,3'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b48
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b48'
Node 0x00000d
acpi-namespace: '\_SB_.PCI0.EHCI'
assigned-addresses: 8200e810.00000000.f5450000.00000000.00000400
reg: 0000e800.00000000.00000000.00000000.00000000.0200e810.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b34.1028.410.5' + 'pci8086,3b34.1028.410' + 'pci1028,410' + 'pci8086,3b34.5' + 'pci8086,3b34' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1d'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b34
name: 'pci1028,410'
Node 0x00000e
acpi-namespace: '\_SB_.PCI0.P0P1'
slot-names: 0000002f.746f6c53.6c530031.0032746f.746f6c53.6c530033.0034746f.746f6c53.00000032
reg: 0000f000.00000000.00000000.00000000.00000000
compatible: 'pci8086,2448.a5' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
model: 'Subtractive Decode PCI-PCI bridge'
bus-range: 0000000a.0000000a
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pci'
power-consumption: 00000001.00000001
devsel-speed: 00000000
unit-address: '1e'
class-code: 00060401
revision-id: 000000a5
vendor-id: 00008086
device-id: 00002448
name: 'pci8086,2448'
Node 0x00000f
#size-cells: 00000001
#address-cells: 00000002
ranges: 00000001.00000000.81000000.00000000.00000000.00000022.00000001.00000024.81000000.00000000.00000024.00000002.00000001.00000028.81000000.00000000.00000028.00000002.00000001.0000002c.81000000.00000000.0000002c.00000006.00000001.00000034.81000000.00000000.00000034.00000002.00000001.00000038.81000000.00000000.00000038.00000002.00000001.0000003c.81000000.00000000.0000003c.00000002.00000001.00000040.81000000.00000000.00000040.00000004.00000001.0000004e.81000000.00000000.0000004e.00000006.00000001.00000060.81000000.00000000.00000060.00000002.00000001.00000063.81000000.00000000.00000063.00000003.00000001.00000067.81000000.00000000.00000067.00000001.00000001.00000070.81000000.00000000.00000070.00000008.00000001.00000070.81000000.00000000.00000070.00000001.00000001.00000080.81000000.00000000.00000080.00000022.00000001.000000a4.81000000.00000000.000000a4.00000002.00000001.000000a8.81000000.00000000.000000a8.00000002.00000001.000000ac.81000000.00000000.000000ac.00000002.00000001.000000b0.81000000.00000000.000000b0.00000006.00000001.000000b8.81000000.00000000.000000b8.00000002.00000001.000000bc.81000000.00000000.000000bc.00000002.00000001.000000c0.81000000.00000000.000000c0.00000020.00000001.000000f0.81000000.00000000.000000f0.00000001.00000001.00000400.81000000.00000000.00000400.00000080.00000001.000004d0.81000000.00000000.000004d0.00000002.00000001.00000500.81000000.00000000.00000500.00000080.00000001.00000680.81000000.00000000.00000680.00000020.00000001.00000930.81000000.00000000.00000930.00000001.00000001.00000934.81000000.00000000.00000934.00000001.00000001.00000cf8.81000000.00000000.00000cf8.00000008.00000001.00001000.81000000.00000000.00001000.00000014.00000001.0000164e.81000000.00000000.0000164e.00000002.00000001.0000ffff.81000000.00000000.0000ffff.00000001.00000000.f54c0000.82000000.00000000.f54c0000.00001000.00000000.f8000000.82000000.00000000.f8000000.04000000.00000000.fed00000.82000000.00000000.fed00000.00000400.00000000.fed10000.82000000.00000000.fed10000.00004000.00000000.fed18000.82000000.00000000.fed18000.00002000.00000000.fed1c000.82000000.00000000.fed1c000.00024000.00000000.fed45000.82000000.00000000.fed45000.0004b000.00000000.fee00000.82000000.00000000.fee00000.00100000.00000000.ff000000.82000000.00000000.ff000000.01000000.00000000.ff000000.82000000.00000000.ff000000.01000000
acpi-namespace: '\_SB_.PCI0.LPCB'
device_type: 'isa'
reg: 0000f800.00000000.00000000.00000000.00000000
compatible: 'pci8086,3b0f.1028.410.5' + 'pci8086,3b0f.1028.410' + 'pci1028,410' + 'pci8086,3b0f.5' + 'pci8086,3b0f' + 'pciclass,060100' + 'pciclass,0601'
model: 'ISA bridge'
power-consumption: 00000001.00000001
devsel-speed: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f'
class-code: 00060100
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b0f
name: 'isa'
Node 0x00001c
unit-address: '1,60'
interrupts: 00000001.0000000c
reg: 00000001.00000060.00000001.00000001.00000064.00000001
name: 'i8042'
Node 0x00001d
compatible: 'pnpPNP,303'
device-type: 'keyboard'
interrupts: 00000001.0000000c
reg: 00000000
acpi-namespace: '\_SB_.PCI0.LPCB.PS2K'
model: 'System keyboard'
name: 'keyboard'
Node 0x00001e
compatible: 'pnpPNP,f03'
device-type: 'mouse'
reg: 00000001
interrupts: 0000000c
acpi-namespace: '\_SB_.PCI0.LPCB.PS2M'
model: 'PS/2 Port for PS/2-style Mice'
name: 'mouse'
Node 0x00001f
interrupts: 00000004
reg: 00000001.000003f8.00000008
model: 'Standard serial port'
compatible: 'PNP0500'
name: 'asy'
Node 0x000010
acpi-namespace: '\_SB_.PCI0.SAT0'
assigned-addresses: 8100fa10.00000000.00006090.00000000.00000008.8100fa14.00000000.00006080.00000000.00000004.8100fa18.00000000.00006070.00000000.00000008.8100fa1c.00000000.00006060.00000000.00000004.8100fa20.00000000.00006020.00000000.00000020.8200fa24.00000000.f5440000.00000000.00000800
reg: 0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
compatible: 'pci8086,3b2f.1028.410.5' + 'pci8086,3b2f.1028.410' + 'pci1028,410' + 'pci8086,3b2f.5' + 'pci8086,3b2f' + 'pciclass,010601' + 'pciclass,0106'
model: 'SATA AHCI 1.0 Interface'
power-consumption: 00000001.00000001
66mhz-capable:
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,2'
class-code: 00010601
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b2f
name: 'pci1028,410'
Node 0x000011
acpi-namespace: '\_SB_.PCI0.SBUS'
assigned-addresses: 8300fb10.00000000.f5430000.00000000.00000100.8100fb20.00000000.00006000.00000000.00000020
reg: 0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
compatible: 'pci8086,3b30.1028.410.5' + 'pci8086,3b30.1028.410' + 'pci1028,410' + 'pci8086,3b30.5' + 'pci8086,3b30' + 'pciclass,0c0500' + 'pciclass,0c05'
model: 'SMBus (System Management Bus)'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,3'
class-code: 000c0500
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b30
name: 'pci1028,410'
Node 0x000012
assigned-addresses: 8300fe10.00000000.f5420000.00000000.00001000
reg: 0000fe00.00000000.00000000.00000000.00000000.0300fe10.00000000.00000000.00000000.00001000
compatible: 'pci8086,3b32.1028.410.5' + 'pci8086,3b32.1028.410' + 'pci1028,410' + 'pci8086,3b32.5' + 'pci8086,3b32' + 'pciclass,118000' + 'pciclass,1180'
model: 'DSP/DAP controllers'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,6'
class-code: 00118000
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b32
name: 'pci1028,410'
Node 0x000015
device_type: 'acpirootnex'
compatible: 'SOLA0001' + 'acpirootnex' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\'
name: 'fw'
Node 0x000016
unit-address: '1'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000000
acpi-processor-id: 00000001
acpi-namespace: '\_PR_.CPU0'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000017
unit-address: '2'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000004
acpi-processor-id: 00000002
acpi-namespace: '\_PR_.CPU1'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000018
unit-address: '3'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000001
acpi-processor-id: 00000003
acpi-namespace: '\_PR_.CPU2'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000019
unit-address: '4'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000005
acpi-processor-id: 00000004
acpi-namespace: '\_PR_.CPU3'
device_type: 'acpicpu'
name: 'cpu'
Node 0x00001a
unit-address: '0'
compatible: 'acpidevice' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\_SB_'
device_type: 'acpidevice'
name: 'sb'
Node 0x00001b
io-space: 00000000.00000020.00000020.00000002.00000024.00000002.00000028.00000002.0000002c.00000002.0000002e.00000002.00000030.00000002.00000034.00000002.00000038.00000002.0000003c.00000002.00000040.00000004.0000004e.00000002.00000050.00000004.00000060.00000001.00000061.00000001.00000063.00000001.00000064.00000001.00000065.00000001.00000067.00000001.00000070.00000008.00000070.00000001.00000080.00000001.00000081.00000011.00000092.00000001.00000093.0000000d.000000a0.00000002.000000a4.00000002.000000a8.00000002.000000ac.00000002.000000b0.00000002.000000b2.00000002.000000b4.00000002.000000b8.00000002.000000bc.00000002.000000c0.00000020.000000f0.00000001.00000400.00000080.000004d0.00000002.00000500.00000080.00000680.00000020.00000930.00000001.00000934.00000001.00000cf8.00000008.00001000.00000004.00001004.00000010.0000164e.00000002.0000ffff.00000001
device-memory: f54c0000.00001000.f8000000.04000000.fed00000.00000400.fed10000.00004000.fed18000.00001000.fed19000.00001000.fed1c000.00004000.fed20000.00020000.fed45000.0004b000.fee00000.00100000.ff000000.01000000.ff000000.01000000
dma-channels: 00000004
interrupts: 00000000.00000001.00000002.00000008.0000000c.0000000d
name: 'used-resources'
prtdiag:
System Configuration: Dell Inc. Latitude E4310
BIOS Configuration: Dell Inc. A05 11/20/2010
==== Processor Sockets ====================================
Version Location Tag
Intel(R) Core(TM) i5 CPU M 560 @ 2.67GH CPU 1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 0 DIMM_A BANK 0
unknown empty 0 DIMM_B BANK 2
==== On-Board Devices =====================================
"Intel GM45 Graphics"
NETWORK_NAME_STRING
==== Upgradeable Slots ====================================
ID Status Type Description
0 available PCI Express x16 J5C1
1 available PCI Express J6C2
2 in use PCI Express J6D2
3 in use PCI Express J7C1
4 available PCI Express J7D2
System Information:
Manufacturer:Dell Inc.
Product:Latitude E4310
BIOS Information:
Vendor:Dell Inc.
Version:A05
Release Date:11/20/2010
BIOS Revision: BIOS Revision:4.6
Firmware Revision:
MotherBoard Information:
Product:0D8H24
Manufacturer:Dell Inc.
Version:A00
Onboard Devices:[Video,Disabled]"Intel GM45 Graphics"
CPU Information:
Processor 0:
Processor Socket Type:CPU 1
Processor Manufacturer:Intel
Current Voltage:0.0V
External Clock:533MHZ
Max Speed:4000MHZ
Current Speed:2666MHZ
Memory Information:
Physical Memory: 4G (4G)
Maximum Memory Support: 4096G
Memory Subsystem 0:
Array Used Function:System memory
Memory Error Correction Supported:None
Maximum Array Capacity:8G
Number of Memory Devices:2
Memory Device 0:
Memory Device Locator:DIMM_A
Total Width:64
Data Width:64
Installed Size:4096M
Memory Device Type:Unknown
Speed:1067MHZ
Memory Device 1:
[Not Installed] -
Openwindows dt libs problems in Solaris 2.8
Hello
My Motif Apps work fine with solaris 2.6
Now, we are moving to solaris 2.8.
I compiled the SAME source code in solaris 2.8 - this App have a different look and feel - like fonts being different, bgcolor, etc.
however, if i compile with solaris 2.6 /usr/dt/lib and /usr/openwin/lib - all looks similar
can anyone point the problems with solaris 2.8
/usr/dt/lib and /usr/openwin/lib
Thanks,
venkatAre you using the same dot files, from the same
login account in each case? This sounds like some
local settings are different. Using different
monitors can make a difference, too. There are two
different systems with the same monitor which you
are using from the same home dir? -
DNS PRoblem in SOLARIS 9.0
Hi
can any one help me on this
I am facing dns problem in solaris sparc 9.0. I am not able to see
" /etc/named.conf" .If i type in.named -v it is showing BIND version .is it required to install bind seprately.
I downloaded BIND from sunfreeware i tried to compile but it is throghing the error something like "make cannot build" after running "./confiugre"
One more query is it possible to install dns and nis server in same solaris box .
could any one guide me how to setup the DNS server and how to configure
Thanks
SolarisTeamHi
Thanks for the reply,
It is working fine with the upgraded version of Weblogic 9.0 from weblogic 8.1. But not with the fresh installation of Weblogic 9.0.
Thanks,
Raj -
Utf-8 encoding problem on solaris
Hello all.
I am using weblogic 9.2 and I am facing a very weird problem regarding the encoding. I fetch data from the db (informix btw) and I forward data as utf-8 to jsps. I have set up everything succesfully on my web.xml, weblogic.xml and all jsps include the page directive for utf-8. When I deploy my application on windows 2k machine everything goes smooth. But when the deployment happens on a solaris machine my jsps show "?" instead of letters. Has anyone faced this problem before? Could you plz direct me towards a solution because this thing has taken me days and days and I still haven't managed to find a solution
Thanx in advance
axelHi,
Start the app, and hook an Eclipse debug project to it. Check if the enconding problem is while retrieving from the DB or while generating the response. If the issue is on the DB, you may need to define the enconding on the connection (I am not sure what driver you are using, but should be able to check this out.) If the issue is while generating the response, just XML escape every character.
Regards,
LG -
Problems with Solaris 10 Secure Desktop server and Windows XP Client
Solaris 10 Secure Desktop server - Windows XP Client - I've tried to open the Solaris Machine's desktop using the browser based http://MysolarisServerName/sdg and the windows native client
http://MySolarisServerName/tarantella.
I log in ok to the Solaris Server.
I can open a VT420 session with the solaris machine, and this works OK, but whenever I try anything else e.g. smc, or full screen desktop it doesn't. I get various error messages e.g. can't open display, and Session Failed - X Session timeout.
I've also installed Cgywin X Server on the Win XP machine to see if this makes a difference, but it doesn't.
Any clues anyone?Being able to run the VT420 session, but not any X-Window sessions is the clue; it's an X-specific problem. Most likely, ssh isn't configured correctly, see: http://docs.sun.com/source/819-4309-10/en-us/base/indepth/ssh.html
Pasting in the (most) relevant bit:
Adding support for X applications
To support X applications through OpenSSH, enable X11 forwarding in the OpenSSH configuration file. On each Secure Global Desktop host:
1. Edit the sshd_config file and include the following:
X11Forwarding yes
2. Edit the ssh_config file and include the following:
ForwardAgent yes
ForwardX11 yes
3. Restart the SSH daemon.
Using SSH and X authorization
If SSH connections fail, when X authorization is enabled, you may have to run the SSH daemon in ipv4-only mode because Secure Global Desktop may not support the xsecurity extension used on your server. You enable ipv4-only mode by editing your system SSH configuration file. For example:
* On SUSE Linux, edit the /etc/sysconfig/ssh file and add a SSHD_OPTS="-4" line.
* On Red Hat Enterprise Linux, edit the /etc/sysconfig/sshd file and add a OPTIONS="-4" line.
Note If the SSH configuration file does not exist on your system, you can create it.
You must restart the SSH daemon after making this change. -
Hi all,
I'm currently trying to build the following (rather simple) setup:
A local network of PCs is connected via a switch to an Ultra 10, running Solaris 9. (10.10.20.x)
On the 2nd interface of the Ultra 10 a router with broadband internet is connected. (192.168.123.x)
On the Ultra 10 currently only a Squid Proxy cache runs.
I plan to enable SunScreen on the Ultra 10 once everything works as planned.
Currently the client PCs can access the internet perfectly well through the Squid Proxy.
I thought, after enabling IP forwarding on the Ultra 10 the clients should be able to access the POP and SMTP servers of my internet ISP, but they can't get any connection to them.
Is my understanding of IP forwarding wrong here?
Do I need an application proxy for mail and other internet applications which don't go through the Squid proxy?
Or do I have a problem in address resolution, which requires some kind of NAT service on the SUN as well?
Sorry, if these are newbe kind of question. Any help appreciated.
Kind regards,
John RobieHi,
I did some research on the internet on that problem.
I figure that I need NAT enabled on that SUN gateway/firewall machine.
I found two possible ways to do that: either use the SunScreen Lite which comes with Solaris 9 or install and use an application called "IP Filter" instead.
Since I planned to activate SunScreen anyway, I'll go for that option.
Can anybody confirm that I'm heading into the right direction?
Cheers,
John Robie -
Installation problem on Solaris 10
Dear All,
We are trying to install j2sdk 1.4.2_13 on solaris server zone. I have downloaded j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin
But when I try to execute this:
#./j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin
It gives me error: The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag
Tried with -console:
The wizard cannot continue because of the following error: Invalid command line option: console is not supported (10
01) (403)
WARNING: could not delete temporary file /tmp/ismp001/2599368
WARNING: could not delete temporary file /tmp/ismp001/6183226
WARNING: could not delete temporary file /tmp/ismp001/1222839
Then tried with -silent:
This time command just completed w/o any output at all.
Please suggest what can I do?
regards, Sean.Dear Siddhesh,
Thanks for your reply.
I tried using X Manager GUI for my Solaris. But when I double click the j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin file to run it, it simply denies saying:
The filename "j2sdk-1_4_2_13-nb-5_0-solsparc-ml.bin" indicates that this file is of type "Unknown type". The contents of the file indicate that the file is of type "Shell script". If you open this file, the file might present a security risk to your system.
Do not open the file unless you created the file yourself, or received the file from a trusted source. To open the file, rename the file to the correct extension for "Shell script", then open the file normally. Alternatively, use the Open With menu to choose a specific application for the file.
Also /tmp has full authorizations:
drwxrwxrwt 7 root sys 557 Jun 24 08:34 tmp
I dont have Hummingbird for X11 forwarding with this client. Do I have any other option??
regards, Sean. -
Compilation problem in solaris 10
Hi,
Iam using solaris 10 SUNW,UltraAX-i2. Iam trying to compile tripwire binaries tw_ASR_1.3.1_SRC. Iam using gcc 3.3.2, later I installed the libiconv package.
on reading the documentation from sunfreeware i modified the file mkheaders.conf putting the line SHELL=/bin/sh in the directory
usr/local/lib/gcc-lib/sparc-sun-solaris10/3.3.2/install-tools
The PATH and LD_LIBRAY_PATH are like this
# echo $PATH
/usr/local/bin:/etc:/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/ucb:/bin:/sbin/:/usr/sb
in:/usr/man:/usr/include/
# echo $LD_LIBRARY_PATH
/usr/local/lib:/usr/X/lib:/usr/lib:/usr/ucblib:/lib:/usr/ccs/lib:/etc/lib:/usr/d
t/lib
Once I changed the configuration changes in the tripwire source. Iam trying to compile make & make install. The output of the make is like this
# make
(cd util; make CC=gcc CFLAGS="-O" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh all)
### Ignore warnings about shift count negative/too large on line 36
gcc -O -ldl byteorder.c -o byteorder
byteorder.c: In function `main':
byteorder.c:36: warning: left shift count >= width of type
byteorder.c:25: warning: return type of `main' is not `int'
(./byteorder; cat ./ntohl.h) > ../include/byteorder.h
gcc -O -ldl types.c -o types
types.c: In function `main':
types.c:29: warning: return type of `main' is not `int'
/bin/sh ./types.sh "gcc -E" > ../include/inode.h
(cd src; make CC=gcc CFLAGS="-O" LIBS="" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh \
YACC="yacc" LEX="lex" all)
/bin/sh help.sh help.txt > help.c
gcc -O -c config.parse.c
gcc -O -c main.c
main.c:704:2: warning: no newline at end of file
gcc -O -c list.c
gcc -O -c ignorevec.c
gcc -O -c dbase.build.c
gcc -O -c utils.c
gcc -O -c preen.c
gcc -O -c preen.interp.c
gcc -O -c preen.report.c
gcc -O -c nullsig.c
gcc -O -c config.prim.c
gcc -O -c dbase.update.c
lex config.pre.l
mv lex.yy.c config.lex.c
yacc config.pre.y
sed 's/lex\.yy\.c/config.lex.c/' < y.tab.c > config.pre.c
rm y.tab.c
gcc -O -c config.pre.c
gcc -O -c help.c
(cd ../sigs/md5; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md5.c
gcc -O -I. -I.. -c md5wrapper.c
(cd ../sigs/snefru; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c snefru.c
(cd ../sigs/crc32; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c crc32.c
(cd ../sigs/crc; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c crc.c
(cd ../sigs/md4; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md4.c
gcc -O -I. -I.. -c md4wrapper.c
(cd ../sigs/md2; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c md2wrapper.c
gcc -O -I. -I.. -c md2.c
(cd ../sigs/sha; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c sha.c
gcc -O -I. -I.. -c shawrapper.c
(cd ../sigs/haval; make CC="gcc" CFLAGS="-O -I. -I..")
gcc -O -I. -I.. -c haval.c
gcc -O -I. -I.. -c havalwrapper.c
gcc -O -ldl -o tripwire config.parse.o main.o list.o ignorevec.o dbase.build.o
utils.o preen.o preen.interp.o preen.report.o nullsig.o config.prim.o dbase.upd
ate.o config.pre.o help.o ../sigs/md5/md5wrapper.o ../sigs/md5/md5.o ../sigs/s
nefru/snefru.o ../sigs/crc32/crc32.o ../sigs/crc/crc.o ../sigs/md4/md4.o ../sigs
/md4/md4wrapper.o ../sigs/md2/md2.o ../sigs/md2/md2wrapper.o ../sigs/sha/sha.o .
./sigs/sha/shawrapper.o ../sigs/haval/haval.o ../sigs/haval/havalwrapper.o
gcc -O -ldl -o siggen siggen.c ../sigs/md5/md5wrapper.o ../sigs/md5/md5.o ../sig
s/snefru/snefru.o ../sigs/crc32/crc32.o ../sigs/crc/crc.o ../sigs/md4/md4.o ../s
igs/md4/md4wrapper.o ../sigs/md2/md2.o ../sigs/md2/md2wrapper.o ../sigs/sha/sha.
o ../sigs/sha/shawrapper.o ../sigs/haval/haval.o ../sigs/haval/havalwrapper.o
nullsig.o utils.o
I think it is not showing any problem. But when I try to make install it is throwing some
error like this. It was unable to find theinsta;; directory under /usr/local/bin. Manually I created the directory to test, it is throwing an error saying that bad file number.
Can any one help me what could be the reason for this.
# make install
(cd util; make CC=gcc CFLAGS="-O" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh all)
(cd src; make CC=gcc CFLAGS="-O" LIBS="" \
LDFLAGS="-ldl" CPP="gcc -E" SHELL=/bin/sh \
YACC="yacc" LEX="lex" all)
/usr/local/bin/install -d /usr/local/bin
sh: /usr/local/bin/install: not found
*** Error code 1
make: Fatal error: Command failed for target `install'
SanjeevThis forum is about using Sun Studio. Your question is about tripwire, which is not a Sun product, and gcc, which is not Sun Studio. I suggest you take your question to a tripwire forum. Check the location where you got tripwire for a support forum.
-
Installation problems with Solaris 8 on Intel
Howdy,
I am having some problem with my installation of Solaris 8 on Intel. I am installing the system on a P133 (Asus TX97 motherboard). When I first start the installation and perform the system scan I get the following error:
The PnP ISA: IDE Controller programable device was unable to be programmed.
This could be caused by two possible reasons:
- Lack of resouces available
- There is a conflict with the following already-existing device: 8086,7111 - Bus Mastering IDE Controller
When I bring up the View/Edit device settings and I scroll to the IDE controller there is an ! mark beside the PCI IDE controller. The controler is specifying: Bus 0, device: 1, function: 1 port 1F0-1F7, 3F6, 170-177, 376, E000-E00F, 0 IRQ 14, 15
Does anyone have any suggestions on how to resolve this conflict? I tried removing the PCI IDE interface and then installing a ISA IDE interfact (for IRQ: 14, IRQ 15 automatically put a PnP IDE controller there). This seemed to resolve the conflict but then I received a: No Bootable devices have been found.
If anyone can help out with how to resolve the conflict, or what the No Bootable Devices have been found error it would be greatly appreciated.
Currently there is a partition set up with NT on it, but I wish to basically get rid of everything on the HD and install Solaris on it. FYI, when I check the HD's in NT it mentions I/0: 1F0-1F7 IRQ 14 and also I/O 170-177 IRQ 15.
Any help would greatly be appreciated.
Regards,
S.When I close down Solais in the CDE I am taken back to the logon screen
and I turn the PC off.Don't do that. If you simply turn off the PC, the OS has no chance to
write back cached / modified disk data back to the HDD - this is also the
reason why solaris has to check the filesystems on the next boot and apparently
has to repair filesystem defects.
What you have to do is shutdown the machine, before you can power it off.
Login as user "root" and use the command
init 5
or
halt
"init 5" will shutdown system services, by executing commands from
/etc/rc0.d/K* with argument "stop". Then it'll sync all modified disk blocks to
the HDD, kills all remaining processes and unmounts all filesystems. In this
state it's safe to power off the machine!
"halt" is a quick-and-dirty shutdown. It does not stop system services (the
/etc/rc0.d/K* commands are not run). But, it syncs all modified disk blocks
to the HDD, kills all processes and unmounts all filesystems. "init 5" is preferred,
especially if you have services like a database server running on the machine,
which needs to be cleanly shutdown. On the other hand, with a default solaris
installation and no extra services, a simple "halt" should be OK.
Btw. if multiple users are logged in on the machine, you should also have a look
at the shutdown(1M) command. "shutdown" sends warnings to the logged in
users that the machine is about to be shut down, ...
Maybe you are looking for
-
Have two iPhones with the same id as I got hubbie one in week and when I got it they asked for email address so I gave the one we use, so when my husband started phone up he just put my password in. When he tried to back his numbers on iCloud they al
-
Problem with Persistence.xml in JDev final after migration
Hi, I am trying to migrate a current project from JDev 11gTp4 to the JDev production release. When deploying the EJB module I get the following problem though (Stack from DefaultServer.log) weblogic.application.ModuleException: Exception preparing mo
-
Multithreaded Java app calling C via JNI...need help!
I have a multithreaded Java app making a JNI call into some C code. It is a high speed imaging algorithm that I simply can't/don't want to do in Java. I am very new to JNI and I am hoping to get some expert advice on how to solve this issue. Basicall
-
Deleting QM View in the material master
Hi Is their any way we can delete the QM view in the material master , once it is created Thanks JJ
-
Problems with Applets notinited with SSL
This is a repost from the java programming area: http://forum.java.sun.com/thread.jspa?threadID=5153036 I have an applet that will not init in the secure area, but works perfectly fine in the public area. I'm pretty close to the end of my rope on thi