Forward Reserved workflow item

Hi Workflow experts,
The work item is reserved by 'X'. ( Not in my SAP user name).
Using my user name how to forward this to 'Y' or how to forward to my user name.
Note: This workitem is not error workitem. If it it error one I can use TCODE SWI2_DIAG.
Thanks in advance,
Sree

Hi
What version are you on?
In ECC there is a forwarding option in SWIA, run it for the said workitem number and then select it and click on <i>Administrator Forward</i>, in the pop-up Select User and enter the user id and finally green tick to forward.
For versions 47 and lower, you can use FM SWL_WI_DISPATCH to do the same, go to SE37 and test execute it after entering the workitem number, you will get a similar pop-up as above....
Good Luck
Ravi
Message was edited by:
        Ravi Dixit

Similar Messages

  • WORKFLOW ITEM forward

    Hello All,
    When I am trying to forward workflow item using SWIA , I am getting the message like " WS is not a valid object type for a task".
    It's in statuts "STARTED" and AGENT is "SAP WORKFLOW".
    How can I forward this item to user as workflow administrator.
    Regards,
    Lavanya.

    Hi,
    Please follow the below steps........
    1. If you have the workflow instance number
    Oepn table SWWWIHEAD through tcode se11/se12/se16
    Enter the instance number in field TOP_WI_ID and execute.
    You will find there are multiple woritem there.
    Get the workitem whrere WI_TYPE is 'W'.
    That is the dialog workitem of that workflow. ( There may be the multiple dialog workitem as per the workflow design )
    Now forward the dialog workitem through SWIA
    2. If you hav woritem number which is not wokflow instance number
    Open table SWWWIHEAD through tcode se11/se12/se16
    Enter the instance number in field WI_ID and execute.
    You will get the worklow instance number in field TOP_WI_ID.
    Now get the top wokitem id adn open table SWWWIHEAD through tcode se11/se12/se16
    Enter the instance number in field TOP_WI_ID and execute.
    You will find there are multiple woritem there.
    Get the workitem whrere WI_TYPE is 'W'.
    That is the dialog workitem of that workflow. ( There may be the multiple dialog workitem as per the workflow design )
    Now forward the dialog workitem through SWIA
    Hoping that this will help you to fix your problem.
    Thanks and regards,
    SNJY

  • Excluding workflows from automatic mail forwarding of work items

    Hi,
    I have configured automatic email forwarding of work items by scheduling a background job that calls RSWUWFML2.
    Is there some way to exclude some workflows, meaning that work items from these workflows shall not be forwarded to the users email?
    Thanks, Oscar

    Hi,
    This you can achieve by creating the Variant
    1) In the workflow identify the Task, which you donu2019t want to send the notification
    2) In the u201CInstance Datau201D Block, in the Task there is a select option, click that.
    3) In the Select option screen you have to give the Task which you want to exclude, in the exclude options
    4) Then save the variant, schedule program using the variant
    Note : you have to give the respective Task No. in the workflow, NOT the workflow No.
    Regards,
    Surjith

  • Admistrator forward in workflows

    I am forwarding a work item to a different user, but the old approver is receiving reminders. When a workitem is forwarded what would the container hold? When I checked a completed workflow's container, it still holds the old approver and the reminder mails are sent to the old approver and not the new approver. Please help us in understanding the standard workflow process when we forward a workitem in SWIA

    You cannot make any change in your workflow for updating the new approver. Because the forwarding will happen from outside of your workflow.
    The solution you have implemented doesnt sound proper to me.
    Why havnt you not implemented standard workflow deadline monitoring which works based on current agent of workflow ?
    Refer below link for deadline monitoring :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e47216-ce95-2e10-cf8f-f861e9a25aa2?quicklink=index&…

  • Will the reserved work item triggers deadline?

    hi,
    im working on DMS workflow for the transaction CV02N.
    when i got the work item , i have double clicked and it has taken me to cv02n  transaction.
    i did not do any thing in the transaction  and came to my business workplace with out saving any thing .
    now the work item status is RESERVED.
    are these kind of reserved work items are able to trigger deadlines if i mention simple deadline for the work item?
    Raghu

    Hi Agardeep,
    i  have to use deadline with latest end tab for my scenario.
    so,  do this reserved work items are able to trigger deadlines for latest end?
    please suggest
    Raghu

  • Automatic Forwarding in Workflow..

    Hi All,
    Is there a way to do an Automatic forwarding of workflow approvals to another SAP User ID. I do see an option in Office Setting and in SO36 but its not working for me. When I try to send some short message, it is working fine but not for workflow generated items.
    I highly appreciate your help.
    Thanks

    Hi, 
    Work items are not like emails since one item can go to more than one person. You have to use susbstition to allow other users access to your inbox.
    From their inbox, the user can go to settings -> workflow settings -> maintain substitute to give someone else access to their inbox.
    Cheers
    Mike

  • How to get the objects from a workflow item's container

    Dear all,<P/>
    We need to get the value of a variable in the container of a workflow item. I can get the workflow item list using function module <B>SAP_WAPI_CREATE_WORKLIST</B>. Then how can I get the corresponding container elements' value?<P/>
    I tried function mofule <B>SAP_WAPI_GET_OBJECTS</B>, but the returned table <B>OBJECTS</B> and <B>OBJECTS_2</B> are both empty.<P/>
    Thanks + Best Regards<P/>
    Jerome<P/>
    null

    Hi,
    Well, I think you will be getting the value as BORNAME:BORKEY. Get the KEYVALUE into your local variable. And use the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4acef453d11d189430000e829fbbd/frameset.htm">BOR Macros</a> to get the instance and desired contents.
    Regards
    <i><b>Raja Sekhar</b></i>

  • Carry forward of Open Items - FMJ2

    Hi,
    We are using BCS in EHP 7.0. i am trying to carry forward the open items with FMJ2 and Availability control is "Update without check". When i execute the transaction, system is carryforwarding to next year without any errors.
    How ever, if i see the availability report FMAVCR01  for 2015-
    Budget for 2015 is 0 - Consumable budget - 0, Consumed Budget is 20000$ and available amount is -20000$.
    Where if i add the budget for 2015 of 50000$, then consumable budget - 50000, Consumed is 20000 and available amount is 30000$. it is consuming from current year.
    Please help me on this.
    Regards
    Sam

    Hi Eli,
    Thanks for your reply
    When i carry forward the open item, and runs the FMAVCR01 report, it is deducting last year open items budget from current year. As i stated above, Consumable amount is 0 and consumed amount is 20000$ and available amount is -20000$.
    Is System should carry forward the consumed budget along with consumable budget?
    Regards
    Sam

  • GRC AC v10 SPM WF - Workflow Item not showing up in WF Inbox

    GRC AC v10 - SP12
    The outlook email notification for the Workflow Item goes out, but there is nothing in the NWBC Inbox for the WF Item. Subsitution is setup correctly.
    Any ideas?
    -john

    Hi John
    this is probably be a silly question but what substitution did you set up for ZFF_CTL_01? I assume the item is in that user's inbox. Which user is meant to be receiving?
    I also noticed this KB article (1589130) which mentions the delegated person needs GRAC_REQ authorisation. Have you checked if security access issue?
    There was also mention that the delegated approver does not appear in the MSMP instance runtime (your screen shot suggests same situation unless you have not set up the delegation). SP14 delivers the fix or refer to  1915928 - UAM: Delegated Approver is not visible in the Instance status
    Possibly have a look at both of them to see if they resolve your issue.
    Regards
    Colleen

  • Delete Workflow items from workflow inbox.

    Hello All,
    We are using workflow in MSS for Compensation Management. As part of this an email will be sent to the managers when a compensation needs an approval. There are some workflow items under workflow inbox ( SBWP ) . How can I delete emails which I don't want to execute. I don't see any delete button. I can see delete buttons for the documents under inbox, but these emails that I want to delete are under workflow in Inbox.
    Thanks a lot for your help and points will be rewarded for any helpful solution.
    Thanks,
    Chakri.

    Thank You Suresh,
    You are refering to the emails in the inbox ( SBWP ) where I can delete my emails with the help of a delete button. But I am referring to the workflow items that are present under INBOX -> WORKFLOW. There is no delete button on these workflow items. If we execute these workflow items then they will be deleted automatically. I am looking for a solution by which I can delete (clean up) all the workflow items that are not executed from last year so that we can be ready for our compensation for this year.
    Thanks,
    Chakri.

  • Regarding workflow items

    Hi,
    Can any one suggest the solution to get the workflow items in the portal UWL.
    I had configured the UWL and I am able to get the mails of the documents in the inbox of SAP. But I am not able to get the workflow items. Even I had maintained the task in SWFVISU.
    Regards,
    Narendra

    Hi,
    The UWL has to be configured in the portal side also.Please refer the below link for the same.
    http://help.sap.com/saphelp_nw70/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
    Thanks,
    Smita Das.

  • CAN Workflow items in KM appear in the UWL

    Hi
    We are looking the features of the Universal Worklist
    and have configured SAP Business Workflow to appear in the
    UWL.
    Can all your workflow items in KM (Document Management)
    be configured so that the end user and one place to see all workflow items
    If so How? Please advise.
    Regards
    Arun

    Hi
    Just to get Clarity.
    KM Notifications appearing in the recent notifications
    small iview, will be incorporated only in stack 11.
    We are currently on EP6 SP9 Patch 1 software un-licensed
    from sdn.
    Hence there is no config to be done because the functionality does not exist at the current level that we are running.
    Regards
    Arun

  • Problem in displaying workflow Items in UWL

    Hi all,
    I am facing the following problems in displaying the workflow Items in UWL
    I am able to see the work flow items in SAP inbox but not in UWL.
    The following are my issues and questions
    1. what is the type of system to be created in portal.
    BI JDBC System
    BI ODBO-Compliant OLAP System
    KM Windows System
    Portal Tenant System
    SAP system using connection string
    SAP system using dedicated application server
    SAP system with load balancing
    Web Service System using WSDL URL
    2. what is the configuration need to be done in Universal Worklist & Workflow
    3. Any other configurations need to be done in WAS server and SAP server.
    Please anyone give me the solutions and it is urgent.
    Thanks in advance
    Thanks
    Ponnusamy P

    Hi,
    <b>1. What is the type of system to be created in portal ?</b>
    This depends on what type of a system are you trying to connect to. If it's an ECC system or R3 system, you may use SAP system using dedicated application server. Give an alias to it and check the permissions of that system.
    <b>2. What is the configuration need to be done in Universal Worklist & Workflow ?</b>
    You have register this system now. Go to System Administration -> System Configuration -> Universal Worklist Administration -> UWL Configuration -> Chose New -> Enter the Name, System Alias and select WebFlowConnector.
    In the System Administration -> System Configuration -> Universal Worklist Administration -> Registration for all types of Universal Worklist WebFlow, register item types by clicking "Register Item types for all systems". Alternatively, you can also click on "Register items types for new systems".
    <b>3. Any other configurations need to be done in WAS server and SAP server ?</b>
    The portal user should have corresponding user on the ECC or R3 system or whichever backend system you are trying to connect to. This user should be authorized to have RFC access to function group SWK1 and transaction SWK1.
    Please refer to this document which lists out all the steps. Please refer to minimal configuration section. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
    Regards,
    Sunil

  • Forwarding of Work Item from Approver's Inbox

    Hi All,
    We are in SRM 5.0 SP07 Classic Scenario.
    We have a requirement of restricting forwarding of work items from approver's inbox to users who do not have a approver's role. Presently, when the system takes in a user ID who is having a requisitioner role or for that matter any role. The requistioner receives a work item but the requsitioner is not be able to approve/reject the workitem.
    We would like to ensure only the approvers are selected in search and other users are not even displayed for selection.
    Is there a way to achieve this?
    With Regards
    Sathya

    Hi,
    As per the config guide,when you try to assign the User,using the FIND button,you will get to see all the users with the role "SAP_BBP_STAL_MANAGER" who can approve.
    Else you can filter the possible selection with the BADI BBP_CHNG_AGNT_GET.
    See the foll thread for more pointers:
    Re: Selection of approvers for Bid
    BR,
    Disha.

  • How to change the details ina BPS workflow item

    Hi,
    I'm working in a SAP BW 3.5 environment and I need to change some details in a BPS workflow item. Unfortunately I have never used BPS and am struggling to get to grips with it and also to resolve the issue.
    Can anyone advise on my issue and also offer any advice / documents that cover BW BPS in a 3.5 environment.
    thanks.

    I think I better change my question. Can anyone please provide link(s) / documents where I can quickly pick up the basics of BW 3.5 BPS so I can start looking into the issue I have.

Maybe you are looking for

  • FiOS Remote App on IPhone

    I have been trying to get the FiOS Remote app to work, but it keeps giving me problems with the sign on.  I don't think my sign on is the issue. My signon works for ... 1. My FiOS app - in which I can pull my account information 2. the Verizon mobile

  • IPod Nano - LCD Faulty?

    Hi, I purchased an iPod Nano for my finacee for Xmas. She has just called me to say she thinks it has broken. The iPod is playing music. However, the screen appears to have broken, as all she sees is the backlight come on and dim as it usually would,

  • A guest at our home used his ipad and changed the network name. How do I change it back to the apple network

    A guest at our house was using his ipad and changed the apple netwrok name to another and put a password on it.  How do I eliminate this netwrok and get back to the Apple Network?

  • IMac not sharing internet via wifi

    I am trying to share internet eternet connection via iMac's wifi, but did not succeed since yesterday. I've been using this mode for the last two years but it suddenly stopped working.

  • Wifi help3

    What do yuo do when the ipod says safari cannot open the page because its not connected to the internet, but it is help!!!!!!!!!!