Forward to multiple addresses

Hi, I'm trying to forward mail from one e-mail to 2 more addresses.
Since you can only define one forward using the GUI, I imagine I have to do it using Sieve. But I don't really get it. If anyone could tell me exactly what I need to do?
And should I define one forward address in the GUI and one using Sieve, or both with Sieve? If it's the latter, then how do I avoid the account of storing the mails it gets (it should only forward them)?
Thanks.

Neither.
Use aliases. If it's local domains they must be written into /etc/postfix/aliases if it's for virtual domains use /etc/postfix/virtual
Open those files in a text editor. They both contain samples.
After you have edited /etc/postfix/aliases issue:
cd /etc/postfix
sudo postalias aliases
sudo newaliases
sudo postfix reload
After you have edited /etc/postfix/virtual issue:
cd /etc/postfix
sudo postmap virtual
sudo postfix reload

Similar Messages

I can no longer select multiple addresses from my Mail address book when forwarding emails

Since updating to Mavericks I cannot select multiple addresses from my address book when forwarding emails.
I can select them individually using the + sign in the address bar but cannot select any when I open my Contact list as I have done with previous systems.
Additionly, the full address appears in the "To" window instead of just the name and without the email address. I have selected "Smart Address" from the Preferences menu, View section.
Help!

Why are you using a Hotmail or Live Mail SMTP server to send email with your Gmail account?
This is likely the cause of the problem. Use Gmail's authenticated SMTP server to send email with your Gmail account.

How do I access my address book when forwarding an email to multiple addresses. I want to be able to view the names and click on them.

I'm trying to forward an email to multiple addresses. I want to be able to view my address book and click on the names I want to the email sent to. How can I do this. Have a MacBook Pro. Thanks.

this is not MBPro forum.
you want Maill Community and if you want to lean how to use Mail, start with Help menu and then I assume you would use BCC
http://www.apple.com/support/mail

Exchange server 2010 forwarding to multiple email address

Is it possible to forward email from one address to multiple email address?

Hi,
On Exchange side, we can create a transport rule to copy the message to multiple addresses. The original recipients can see these addresses in Cc address. Or we can blind these addresses in Cc addresses. Here are detail steps:
Open EMC, navigate to Microsoft Exchange On-premises > Organization Configuration > Hub Transport
In middle panel, click on Transport Rules tab
In actions panel, click on New Transport Rule to create a transport rule.
Enter the name and comment of transport rule, then click
Next.
Select sent to people condition and click on people to add the email address you want to apply this rule to, then click
Next.
Select copy the message to addresses action (multiple addresses will show up in Cc address) or
Blind carbon copy(Bcc) the message to addresses action ( multiple addresses will show up in Bcc address and original recipient can’t see the Bcc address)
Click on addresses to add multiple addresses.
Then click on Next > Next > New to create and apply this transport rule.
Transport Rule Actions
http://technet.microsoft.com/en-us/library/aa998315(v=exchg.141).aspx
On Outlook client side, we can create email rule to achieve this goal. Here are steps:
Click File > Info > Manage Rules & Alerts
Click on New Rule, then select Apply rule on the messages I receive.
Click Next, select where my name is in the To or Cc box condition.
Click Next, select forward it to people or public group.
Click on people or public group to add multiple addresses.
Click Next > Next > Finish to create and apply this rule.
Best Regards.

Sending email to multiple address using Utl_Smtp

Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause:    A SMTP permanent error occurred.
*Action:   Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected]                         U1
[email protected]                         U2
[email protected]                         U3
[email protected];[email protected];[email protected]     U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected]     U1
[email protected]     U2
[email protected]     U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank you

Simple Mail Transfer Protocol RFC 5321 specifications.
      RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
   The first or only argument to this command includes a forward-path
   (normally a mailbox and domain, always surrounded by ">" and "<"
   brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb.

How do I add multiple addresses/contacts in an email tread to my contact list without having to enter each at a time?

How do I add multiple addresses/contacts in an email tread to my contact list without having to enter each at a time? I have AppleScript but don't see "add address" in any of the boxes/drop-downs.

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

Forwarding to ePrint Address?

I have my own domain name with email hosted by Gmail which I wanted to setup an address such as [email protected] to forward to the randomly generated ePrint address. When I try this I get the error below, which technically it wasnt sent to multiple recipients, just forwarded from one address to another. Is there any way I can make this work? I am not concerned about the unintended printing as I created rules to only forward if the email comes from a specific address etc. Any help on this would be greatly appreciated!
"The email was sent to multiple printers or recipients. HP's ePrint service only processes emails sent to a single recipient to protect users from unintended printing."
This question was solved.
View Solution.

Sorry to say that a lot of us are waiting for this feature to be allowed.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

PO to supplier using external send option email (to multiple addresses)

Hello All,
We have activated PO external send option for our client but they want that PO should be sent to more than one ID of the supplier and it seems that is not possible by maintaining multiple addresses in Vendor Master's Address view as system only picks one having indicator ticked, also system does not allow to tick it for more than one address. Please let me know if it is possible using standard function to send PO email to more than one address.
I need to know if there is any standard way of doing this w/o using any development or ABAP work.
Also has anybody tried using disctribution list SO15 if it is possible?
Please help we are at Go live.
Regards
Anjan
Edited by: Anjan Dubey on Aug 12, 2009 10:28 AM

Hi,
From my opinion, it's impossible of the standard function in SAP system, so:
Firstly you need to confirm with your buyers, whether they really require to send the information to multiple addresses, maybe they can send the information to one contact person on vendor side, then the contact person can forward the email to other relevant people;
If have to do it, you need to develope an ABAP background job to do it!
Hope you can solve the problem!
Good luck
Tao

WRT160Nv2-Problem with Single Port forward to multiple servers with same internal port numbers.

On my network I have 3 systems that I've set up as RDP hosts. And need to get to all three of them externally. So I'm trying to do the following single port forwarding.
RDP 1   Forward 4000 to port 3389 for 192.168.1.11
RDP 2   Forward 4001 to port 3389 for 192.168.1.12
RDP 3   Forward 4002 to port 3389 for 192.168.1.14
When I hit "Save Changes" I get the error "Port range already exists". So it's good that it won't let me overlap ports generally, but at the same time, I'm trying to send them to different IP address. There should be no overlap in this case. Please advise
I'm trying this on the WRT160Nv2 with firmware 2.0.02, which I had just bought this weekend.

kevj,
Thanks for your suggestion. I have now upgraded the firmware to 2.0.03 build 7. But I am still seeing the error message
As I mentioned previously, I'm trying to single port forward to multiple machines in the following way:
Machine 1:   Forward 4000 to port 3389 for 192.168.1.11
Machine 2:   Forward 4001 to port 3389 for 192.168.1.12
Machine 3:   Forward 4002 to port 3389 for 192.168.1.14
The error appears to be generated by the fact that 3389 is selected for multiple external port numbers, but the same internal port number. The router I believe isn't taking into account that the similar internal port numbers aren't taking into account the different internal ip address I'm trying to send this to.
This would be a standard sort of practice for running a live HTTP server on one machine, and a new beta HTTP server behind the router on a secondary machine on the same internal port, but different external port numbers for test purposes from the outside.
Please advise
Thank you.

How do I use multiple addresses at one time?

Shouldn't the Adobe server page that allows for the entry of a recipients address tell users how to add another address? Do we separate them with semicolons? Commas? Or is it even possible to use multiple addresses?

Yes, Adobe Send.
Unfortunately, it is NOT spelled out on the page where you enter email addresses of recipients, nor is it revealed if you click on the question mark box by email address.
Frank
=========================
Frank Schmalleger, Ph.D.
Distinguished Professor Emeritus
The University of North Carolina
Website: www.schmalleger.com
Amazon Author Page: http://tinyurl.com/78nly4s
Mailing Address:
Ste 203-332
4300 S. U.S. Hwy 1
Jupiter, FL 33477
Ph. 561.225.1760

How to select multiple addresses from the contacts list to send an email?

How do I select multiple addresses from the contacts list at one time to send an email. Each time I select one, the address book closes and I have to touch the "+" key to open it back to select another address. Is there a way to select all of them at one time instead of making a group? Thanks.

Yes, once you select a person from your Contacts app, you either need to select more from the '+' button or you can tap in the 'to:' field and type in the first few letters of a contact and select from the list. Kinda bummer but gotta make do.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

I have an Apple ID with a single e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

I have an Apple ID with a single e mail address. I want to set multiple addresses in the same ID. Can I? If so how?

Howdy there johnzcarp,
As I understand it you want to have more than 1 email address under your Apple ID. You can have what are called Alternate Email addresses associated with your Apple ID and this article will help you get those setup:
Manage your Apple ID primary, rescue, alternate, and notification email addresses
Alternate email address
You can add one or more alternate email addresses for use with Apple services such as Game Center, FaceTime, Find My Friends, iMessage, and OS X notifications.
Go to My Apple ID (appleid.apple.com).
Select “Manage your Apple ID” and sign in.
Add an alternate address:
Select Add Email Address, then enter your alternate address. Apple will send a verification email to that address. Didn't receive the email?
Follow the instructions in the email to verify the address.
Edit an alternate address:
Select Edit next to the address, then enter the new address. Apple will send a verification email to that address. Didn't receive the email?
Follow the instructions in the email to verify the address.
Delete an alternate address: Select Delete next to the address.
Thank you for using Apple Support Communities.
Take care,
Sterling

How can I send to multiple address in one email?

In Outlook, I can send the email to multiple addresses by separating the emails with a semicolon. How can I do this using utl_mail?
Thanks!

Calling utl_smtp.rcpt multiple times.
[read more|http://download.oracle.com/docs/cd/A91202_01/901_doc/appdev.901/a89852/utl_smt9.htm#1000815]
Example:
DECLARE
    mailhost    VARCHAR2(64) := 'mailhost.fictional-domain.com';
    sender      VARCHAR2(64) := '[email protected]';
    recipient1   VARCHAR2(64) := '[email protected]';
    recipient2   VARCHAR2(64) := '[email protected]';
    recipient3   VARCHAR2(64) := '[email protected]';
    mail_conn utl_smtp.connection;
BEGIN
    mail_conn := utl_smtp.open_connection(mailhost, 25);
    utl_smtp.helo(mail_conn, mailhost);
    utl_smtp.mail(mail_conn, sender);
    utl_smtp.rcpt(mail_conn, recipient1);
    utl_smtp.rcpt(mail_conn, recipient2);
    utl_smtp.rcpt(mail_conn, recipient3);
    utl_smtp.open_data(mail_conn);
    utl_smtp.write_data(mail_conn, 'This is a test message.');
    utl_smtp.close_data(mail_conn);
    utl_smtp.quit(mail_conn);
END;
/Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com]
Edited by: Massimo Ruocchio on Dec 18, 2009 9:49 PM
Added example

How to use multiple addresses for a global vendor

Hi experts.
scnerios is.company has different plants in different countires.they have centrally agreed contract with vendor.now each plant create p,o is in different country how can we use that vendors local addresses in p.o because in vendor master we can define one addres at a time.so if that adrees is in other country.and plant creating p,o is in different how can select the local address of that vendor.
if option is partner function then how to use it.all adressess witl be odering address of that vendor.his offices is alll the counties.
thanks

IQBAL,
You can maintain multiple addresses for the same vendor using international addresses.
First, you have to Activate International Address Versions for each country/language via config at
IMG: Flexible Real Estate Management (RE-FX) > Address Management > International Settings > Activate International Address Versions (You can do this even if you are not using Real Estate Management
Then, in the vendor master, address screen, select the "International Verion" button, select the address version and maintain your address.
If you have any programs that need to display or print these addresses, you will have to specifiy the address version to display/print. by default, the version (Field = NATION) is Blank.
I hope this helps.

Forward to multiple addresses

Similar Messages

Maybe you are looking for