Forwarded Routing Rule - Unity Connection Help?

Hi Folks,
I have a requirement for the following scenario:
Reception phone is Ext 2000. On a holiday day, reception will forward Ext 2000 to ext 2001. Ext 2001 is then forward all to Voicemail.
On CUC, I have setup a call handler with extension 2001 which I want to play when someone calls the reception on 2000.
To achieve this I have had to setup a 'Forwarded Routing Rule' which matches on calls forwarded from ext 2000 and sends the call to the call handler I created.
My Problem:
During normal working hours, the reception (Ext 2000) is busy and someone calls in, the call will get forwarded to CUC. When this happens, the call is being picked up by the forwarded rule and is hitting the 'Holiday' greeting, which I do not want to happen.
Any ideas why this might be happening. I would expect that a call hitting 2000 and then voicemail would NOT hit the forwarded rule because its not forwarded on to another extension...

Seems to be working as designed, you have a Forwarding Rule matching 2000, so when a call comes in from 2000 it matches. I am guessing you set Calling Number = 2000 in the rule?
I think you want the Forwarding Rule to be Forwarding Station = 2001.
You could also apply a schedule, to either the routing rule or the 2000 VM box, that included a list of holidays but then you have to remember to keep up with that every year.

Similar Messages

  • Call forward to unity connection call handler

    have  the following setup:
    cucm 8.6
    cuc 8.6
    a cti route point (DN 1000 )with forward all to unity connection call handler.
    phone users who choose to have some quiet time can forward all their calls to the cti rp.
    1. i need to allow only specfic DNs the ability to forward to the cti rp.
    2. at times that  the allowed DNs didnt choose to forward to cti rp then normal behaviour should occur - busy or unanswerd calls should go to DNs personal voice mail.
    thanks

    You can assign a specific partition to cti-rp and assign it to a CSS and this CSS should be assigned to those users (at call forward settings in line) only to whom you are trying to give this facility and for other users you can 
    or you can create a TP for it with specific partition and set the called number as per voice mail.
    Suresh

  • Cisco Unity Connection 8.5 PIMG integration.

    Hello Experts
    My customer has PIMG integration with Cisco Unity Connection, users can access their mailboxes after creating a direct routing rule with the search scope where this users are located to send the call to "attemp sing in" conversation this part is working fine. Now subscribers do not get the user's mailbox when reaching FNA,Busy or RNA they are going to the "welcome to Cisco Unity Connection Messaging System from a...  default greeting. Using Remote port status monitor I can not see the call coming in,but I am sure the call is getting to that server. I will like to know what traces I can enable to get the extension that is being sent by PIMG or what else I can check on the Unity connection server to resolve this issue?
    Thanks in advance

    Hi Rob
    I  configured the Direct Routing to send the calls to conversation "sing in" because the customer has multiple integrations and duplicated users with same extesion,  he was getting "invalid username and password" everytime they try to log in, meaning that the user was in different CSS and the existing Direct Routing Rule did not have this CSS in the Search Scope.Maybe in you case you the users were not sorted out by CSS.
    I am pritty sure they are using Nortel phones,but not sure what exact version.
    Thank you for your response.I will try to configure a Forward Routing rule to send the calls to and specific user'extension base on the calling number to see what happens.

  • Cisco Unity Connection 8.5 Greeting Administrator

    Hi
    I've set up 2 call handlers for an IVR set up I have created, it all works, I need the user to be able to create/amend greetings.
    I have set up a DN pointing to connection, created a direct routing rule, checked conversation/greetings administrator, created a routing rule in for the DN I created in callmanager.
    I 've set a call handler owner as me to test.
    When I dial the number for greeting admin (12345), I get the normal welcome to cisco unity connection message.
    it's not really clear in the admin guide how to drive it, any ideas anyone?
    Thanks
    Tim

    Hi Tim,
    When I set this up on our CUC 7.1 system, I found that the Direct Routing Rule
    only worked if the greeting Admin DN was actually on a phone and that number 12345
    was used to access CUC (kinda makes sense). It's more likely that you set up DN 12345
    as a CTI-RP or something else and are using Call Forward All to reach Unity Connection.
    In this case you will need to use the Forwarded Routing Rules.
    Cheers!
    Rob

  • Unity Connection transferring calls to CUCM

    I have posted here before, continuing my learning in my lab.
    CUCM 9 and CUC 9.  4 IP Phones registered and all have mailboxes.  I have a System Call Handler configured to answer calls coming from a CTI Route Point.
    I have been playing with a scenario trying to learn all the capabilities of the various call handlers.
    Im currently trying to allow the caller to transfer to a phone number that is registered in CUCM - but does NOT have a mailbox.
    My CUC Configuration
         Call Handler Basics
              Callers Hear -> My Personal Recording
              During Greeting -> Allow Transfers to Numbers Not Associate with Users or Call Handlers
              After Greeting -> Conversation -> Caller System Transfer
         System Settings -> Restriction Tables
              Default Transfer
                   I added a new entry and specifically entered the DN that I was trying to transfer to (123)
                   I unchecked the "blocked" for all entries
         Call Management -> Call Routing -> Forwarded Routing Rules
                   Attempt Forward Routing Rule -> Send Call to -> Conversation -> Attempt Forward
    From an IP Phone, I dial the CTI RP and get forwarded to the main / opening call handler.  I traverse a couple of menu tree levels to get to my call handler where I am attempting to transfer back to CUCM.  I hear my recorded personal greeting instructing me to enter my number.  Whether I wait for the recording to end or whether I enter the digits during the greeting, the results are the same.  The result is that nothing happens.  No recorded message telling me that I cant be transferred to that number - nothing at all.  The call just terminates.
    I started up Connection Remote Port Status monitor and I can watch the sequence of the call.  When I enter the digits of the target phone (123), I see in the Remote Port Status Monitor that it sees and receives the DTMF digits, but then nothing happens. 
    I next tested by adding a test user in CUC with the same DN of 123.  As soon as I did that, I repeated the attempted call and when I dialed "123", I get the recorded message "Wait while I transfer that call" and then the call completes successfully.
    This is my home lab so I can make any changes that you suggest with no user implications.
    Jeff

    Hi Jeff,
    That is weird! It is still shown in this 9.x doc
    Overview of Default Restriction Tables in Cisco Unity
    Connection 9.x
    Default Fax
    Restricts numbers for fax delivery.
    Default Outdial
    Restricts numbers for message notifications
    Default System Transfer
    Restricts numbers that can be used for
    Caller system transfers, which allow
    unidentified callers to transfer to a
    number that they specify. For example,
    callers may want to dial a lobby or conference room phone that is not
    associated with a Connection user. By default, the table does not allow
    Connection to dial any numbers.
    Default Transfer
    Restricts numbers for call transfers.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/administration/guide/9xcucsagx/9xcucsag110.pdf
    Cheers!
    Rob
    "May your heart always be joyful
    And may your song always be sung
    May you stay forever young " 
    - Dylan

  • Unity Connection 8.6 not able to forward from extension (dial out)

    Dear all,
    I'm having a problem at a customer where i'm not able to forward calls externally from the Unity (that's a wish too).
    Basically here is the request for which I'm having an issue:
    - I'm making a menu with a number XXX (CTI Port) with a System Call Handler
    - Under that menu i've 3 choices which points to 3 internal numbers (YY1, YY2, YY3) (CTI Ports).
    - All the CTI Ports are forwarded to international numbers which are the final destination
    So the flow is the following:
    NOT Working
    - XXX --> Choice 1 --> YY1 --> Forwaded all to 000countrycode
    Working
    - XXX --> Choice 1 --> YY1 --> Forwarded all to 444 (internal number)
    The strange thing is that I tested everything when I was on site by calling internally XXX from an internal number and it was able to forward all my call to the international number ...
    If anyone have a clue about what I can do, I'll appreciate a lot ...
    Thanks in advance
    C.

    Hi Taranjit,
    The rules are not made to enable unity to dial out, my goal was to permit only internal calls, but in this specific case, the internal number, is a CTI Port forwarded all to the external international number...
    I tried the Unity connection system handler from a internal phone and it was working perfectly, but not if the call is coming from outside apparently.
    Kind regards
    Christophe

  • ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

    Hello All,
    I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with  IBM LOTUS  Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC  version is 8.x
    I have attached the file that displays the error.
    From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
    Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
    "The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
        where 10.0.0.152 is the IP-Address of my Unity Connection Server.
    Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
    I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
    A Quick Help will be much appreciated .......... :-)
    Hasan Jafri

    Hello Craig,
    After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
    Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
    But still I am NOT able to use Forward option to send the Voice Messages via VMN.
    REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
    This is error that I am getting
    "Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
    I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
    Its 7 MB Recording. I hope you can easily Download.
    Also important point is that i don't see any previous error that was accuring during my earlier testing.
    Thanks & Regards,
    Hasan Jafri

  • Cisco Unity Connection 8.6 Distribution list help.

    We have a shared department line on several phones ( say 30  ) with VM and users were accessing the VM  through the telephhone interface.
    Recently we had a request from the leadership team ( say 5  ) , that they need unified messaging ( VM in their emails)  for that department line.
    How do i make it possible so that the leadership team has the unified messaging( VM in their emails ), while the other user still have access to the dept line VM through telephone interface.
    If  I create  distribution list with the the leadership team  as DL members and call handler for the dept line DN with message  setting set to receipients as the distribution list , would that do it ? Will the other users still  be able to access the VM through their phone. how do I make it  possible .?

    Indu,
    I understand you requirement and I'll be upfront and say there are only so many options here as I see it and each has its own caveats/limitations.  Here are a couple:
    1.  You will need an SMTP Smart Host configured for Unity Connection for this solution to work.  The Smart Host is just an SMTP relay server and it needs to be configured to accept messages from and deliver messages to the SMTP domain of Unity Connection.  That also means that you need to configure Unity Connection to allow inbound SMTP from this host (i.e., a trusted address configuration).
    2.  You will need an email distribution list or shared email address that you can forward a copy of voice messages for the mailbox to.  That email distribution list needs to have your special users set as members.
    3.  Once the first 2 items are in place, go to the shared mailbox and set the Message Actions for Voicemail to "Accept and Relay" and then specify the relay address as the address for the distribution list you set up in item 2.
    4.  Leave the configuration for the shared mailbox the same except for the accept and relay configuration above.  All users will continue to have the same phone-based functionality.  The difference is that a COPY of every voicemail will be sent to the special users via the relay to distribution list.  The caveat is that this is not Unified Messaging.  It does get the voicemail into email but there is no synchronization of MWI and/or message status for users that rely on email client to check messages.
    Another option would be an Integrated Messaging solution.  This also is not Unified Messaging but does provide synchronziation between the shared line and email client; however, it requires that each of your special users set up an IMAP connection from their email client to the Unity Connection server.  So, the messages will not be seen in their personal email inbox but rather in a separate IMAP folder in the email client.
    Hailey
    Please rate helpful posts!

  • Unity Connection 8.6.2 Forward vm to another email address

    Hey team!
    I have employees that I want the ability to forward voicemails to an outside email address such as [email protected]
    I do this currently for the users that I have NOT migrated from Unity to Unity connection.  The way i do it for Unity users is i create a dummy AD account that is the users 10 digit phone number.  On that dummy AD account I click on the exchange general tab then click delivery options.  I then set the forwarding address to something else such as [email protected]
    I want to get away from creating these dummy AD accounts. 
    In Unity Connection is there a setting that will allow me to create a user in connection but set a relay of that voicemail to another email domain?
    I have about 150 users that I would like to make this work for.
    Any insight is greatly appreaciated.
    Del

    I think I have found what I am looking for.
    http://www.netcraftsmen.net/component/content/article/70-unified-communications/695-voicemail-only-voicemail-relay-and-integrated-messaging-options-with-unity-connection.html

  • How is an Order Routing rule connected to the IC Webclient Profile

    I created a simple ERMS order routing rule that If priority equals very high then route to John Smith whom is assigned to the IC Web position in PPOMW.
    When I create a service ticket and mark it very high and choose the ESCALATE button the message no rule for routing was found. 
    I don't see anyway to connect this rule to our IC Webclient profile, or why the rule wasn't envoked. Will give points.
    Edited by: John Burton on Apr 21, 2008 2:54 PM

    Hello Glenn,
    Yes, you are correct. In addition to creating a Rule Modeler policy via the IC Manager role (accessible from the BSP view or Enterprise Portal), the business user also needs to request that IT (or someone) add the name of the Rule Modeler policy as an attribute of the RE_RULE_EXEC service for the applicable Service Manager profile in the IMG configuration for the relevant Rule Modeler context (Order Routing, ERMS, etc.). I certainly agree with you that the business user and the IT user as generally two different people. And if they are the same person, Sarbanes Oxley probably has something to say about that Your point is definitely valid. Perhaps in the future we need to be more considerate of the distinction of job responsibilities of business user versus IT user when designing products and solutions.
    By the way, just as an aside... some Rule Modeler contexts can only use one Service Manager profile (for example Order Routing must always use a Service Manager profile called "SAP_ORDERROUTING") while other contexts can use multiple Service Manager profiles. For example, as of CRM 2005 (CRM 5.0) it is possible in transaction CRMC_ERMS_SM_PDET to assign different Service Manager profiles directly to different inbound email addresses for ERMS. And by assigning a different Rule Modeler policy to each Service Manager profile, you can use different root/default Rule Modeler policies for each incoming email address.
    Warm regards,
    John
    Edited by: John Burton on May 1, 2008 10:01 PM

  • Airport Express/Router Connection - Help Needed!

    I was given an Airport Express for Christmas to use to beam my iTunes from my iMac to a pair of powered speakers in a different room. I was using the AE in conjunction with a Netgear wireless router.
    It was a pig to set up but now I wish to change everything and I might need help.
    I want to connect my router to the iMac by ethernet cable - the 2 bits of equipment are only 2 feet apart! Thus the AE will be the only piece of kit connected wirelessly to the router.
    I would like to delete the present connection of AE to router and start again.
    Is there anything I need to know about changing my router to Mac connection from wireless to wired and reinstalling my wireless connection from router to AE?

    Is there anything I need to know about changing my router to Mac connection from wireless to wired and reinstalling my wireless connection from router to AE?
    For the iMac:
    System Preferences > Network > Show > Network Port Configurations
    o Verify that a Built-in Ethernet option exists. If it does not, click "+" to create one. (Note: If you are unable to create a Built-in Ethernet configuration, the Ethernet card in your computer either doesn't exist or it is not recognized.)
    o Verify that Built-in Ethernet is at the top of the list. If it isn't, you can drag it to the top.
    Advanced > TCP/IP tab
    o Configure IPv4: Using DHCP
    o Configure IPv6: Automatically or Off
    Advanced > DNS tab
    o Verify that your ISP's DNS server(s) appear. If they do not, click "+" add them.
    Advanced > Proxies tab
    o Configure Proxies: Manually
    o Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
    o Exclude simple hostnames (unchecked)
    o Bypass proxy settings for these Hosts & Domains: <leave blank>
    o Use Passive FTP Mode (PASV) (checked)
    Ethernet tab
    o Configure: Automatically
    For the AX:
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    *AirPort > Base Station*
    o Base Station Name: <rename or leave default>
    o Base Station Password: <enter desired password>
    o Verify Password: <re-enter desired password>
    o Remember this password in my keychain: (optional)
    o Set time automatically: (unchecked)
    *AirPort > Wireless*
    o Wireless Mode: Join a wireless network
    o Network Name: <existing Netgear's wireless network>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    *_In iTunes:_*
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

  • %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure

    Hi,
    I have an ASA5510 running version 8.2(5). I have set up a new network on interface Ethernet0/1.777 of the fwl. The firewall works perfectly with remote access VPNs but has now given me the error with the new network that has been set up:
    %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure
    The difference between the other networks and the new one that I have set up is that this is the first one using a private addressing scheme. I understand that NAT is not allowing something along the way but I cant figure out what needs to change in order to get it to work. My config is as follows:
    interface Ethernet0/1.777
    description TRU 777
    vlan 777
    nameif tru777
    security-level 50
    ip address 10.1.34.17 255.255.255.240 standby 10.1.34.18
    access-list acl_tru777 remark * ALLOW ALL OUTBOUND *
    access-list acl_tru777 extended permit ip any any
    access-list RA-VPN extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
    access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 10.0.0.0 255.0.0.0
    access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 172.16.0.0 255.240.0.0
    access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 192.168.0.0 255.255.0.0
    access-list acl_ra-lock-tru777 extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
    access-list acl_ra-lock-tru777 extended permit ip 10.159.159.0 255.255.255.0 10.1.34.16 255.255.255.240
    ip local pool ra-pool 10.159.159.0-10.159.159.254 mask 255.255.255.0
    nat (tru777) 4 access-list acl_no-nat
    nat (tru777) 2 10.1.34.16 255.255.255.240
    global (outside) 2 x.x.x.x
    crypto isakmp nat-traversal 20
    I think that is everything you should need, if not please just ask.
    Thank you very much in advance,
    Chris

    Hi Julio,
    Here you go:
    FWL01# sh nameif
    Interface                Name                     Security
    Ethernet0/0              outside                    0
    Ethernet0/1              CLIENTS                 50
    Ethernet0/1.314        tru01                      50
    Ethernet0/1.313        dmz01                    50
    Ethernet0/1.316        tru02                      50
    Ethernet0/1.776        dmz776                  50
    Ethernet0/1.777        tru777                     50
    Management0/0       management           100
    FWL01#  sh run nat
    nat (tru02) 1 192.168.3.0 255.255.255.240
    nat (tru777) 4 access-list acl_no-nat
    nat (tru777) 2 10.1.34.16 255.255.255.240
    FWL01#    sh run glob
    global (outside) 1 interface
    global (outside) 2 x.x.x.x
    Thanks,
    Chris

  • Unity Connection 8.5 Help Desk Administrator Role

    I have a Unity Connection 8.5 Cluster and I have assigned agents on our helpdesk to the Help Desk Administrator Role.  When looking at the Roles page the Help Desk administrator has right to (as per the text on the page) "Resets user passwords and unlocks user accounts, views user settings" and I see that "Reset User Passwords" is selected in the check boxes.
    When logged in as an account with this role assigned, I can navigate around CUCM to view pages but when I try to reset a voicemail PIN I get the message "Not Authorized" when I press save.
    What am I doing wrong?
    Thanks in advance

    Hi Culittle,
    I have some similar but different issue. I have users with admin roles (Technician,Help Desk administrator & User administrator). We are getting Not Authorized error while resetting the password of fellow admin users. They are able to reset the passwords for the voicemail account holders and delete users, however unable to reset the passwords of admin users.
    Any assistance is greatly appriciated.
    Thank you

  • Unity Connections 7.x Unable to route to Contacts from Call Handler

    Unity Connection 7.x.  CallManager 7.x.
    My desired goal is to route from an AutoAttendant CallHandler to CallManager users that do not have VoiceMail boxes.  I have created a contact with the following:
    alias: myuser
    first: my
    last: user
    display: my user
    voice name: recorded
    list in directory: yes
    transfer enabled: yes
    transfer extension: 1234
    When dialing AA and pressing # to get the the directory and doing dial-by-name, I am able to route.  When dialing the extension number during the greeting, I receive the following:
    "I did not recognise that as a valid entry"
    When selecting "Allow Transfers to Numbers Not Associated with Users or Call Handlers" from within the AA Handler and then dialing by extension, I receive the following:
    "You cannot be transferred to this number"
    Is there a way to dial the extension number to get to the user's device?
    Regards...

    Hi Phil Denton,
    You are indeed going on the right track with the
    "Allow Transfers to Numbers Not Associated with Users or Call Handlers"
    What you're missing is the restriction table which by default doesn't allow any patterns to be dialed.
    So in the System Settings go to the Restriction Tables and select the "Default System Transfer", and add a pattern that matches your internal extension or just that specific one.
    Now this will permit dialing by extension to those specific patterns, one last thing you should verify is that the CSS assigned to your voicemail ports in UCM has the proper partitions to dial those extension.
    HTH
    Jonathan Sylvain
    Message was edited by: Jonathan Sylvain My bad didn't notice original past was in 2010

  • Help needed on Unity Connection

    I'm setting up a new branch office with CUCM and Unity connection in HQ and h323 GW in branch office.  The phones are registered with HQ CUCM and everything works fine.  The issue is with Unity Connection.  I followed exactly how other remote site is setup.  However, when I dialed the new remote office, it rings and it goes to our company main greetings not their individual voice mail box.  On the CUCM side, I created VM pilot and VM profile for a new office along with calling search space, partition.  And, assigned all new DNs to a new VM profile.  Any suggestion?  I'm very new to Unity Connection.
    Thanks. 

    Hi Peter
    How is your CUCM integrated with Unity Connection ? By VM Ports or Sip Trunk ?
    Regards
    Aditya Gupta

Maybe you are looking for

  • Problem with n95 pc suite music manager

    when i load up pc suite and click on music manager to transfer music files from my pc to my phone it shows up for about 10 secs and automatically closes by itself, every other one is fine except install applications which does the same thing but i ca

  • How do I change the itunes account my iphone is linked to?

    My wife and I both have Itunes accounts but somehow my iphone is linked to her account. I simply want to link my iphone to my account and can't discover how to do this. Should be very simple I guess but if i try and edit her ID on Itunes by putting m

  • What is the difference?

    I'm a bit confused between the difference between the following 3 ways of setting up PSTN fallback if WAN bandwidth is insufficient in GK scenario Say I want to call extn 3xxx on the remote office. The intercluster prefixs are *801, and the PSTN digi

  • Best way to create output with only topics that are not finalized

    I'm nearing the end of a project and I need to isolate the topics that still have questions. I keep trying things, but nothing gives me what I need. Any suggestions? Here's what I tried. I'm using RoboHelp 9 (RH9). Status I can get a report of the to

  • Regarding changing and using

    Hello experts:     First thank you in advance for all your replies.     would you please explain the difference of changing and using preferably by an example?     couldn't thank you more. Best regards. Frank