Forwarding a selection of a message in Mail, without if sending the entire message

Hello
I have recently incurred a few problems with Mail, forwarding and replying to messages.
I have selected a section of a message I wanted to forward to a friend, selected the pictures, clicked on forward and added a message and email address. I have later checked my sent box and Mail has forwarded the new message with pictures at the top of the email and the entire original email below, containing personal information, personal conversations and contact info!
Why? It did not show all this in the new window when I selected the pictures.
I have not changed any of the setting on my iMac as I have not had any problems prior.
Can someone let me know if there is a bug in Mail or have I simply done something wrong, as I do not wasn’t to repeat it again.
Peter

From the sounds of it I don't think this is a problem - I think it's just your perception
By default, Mail.app shows messages in a threaded view - that is, when you reply to a message (or get a reply to a message), Mail.app shows the message thread so that you can review the entire message stream without having to hunt down other messages in your InBox or Sent Items.
The clue is the disclosure triangle in the message list, and dividing line and message headers (From, To, Subject lines) between each message in the message pane.
The upshot is that this is local to your machine only - YOU can see the message thread, but people you forward the snippet to cannot.
You can test this easily enough by forwarding your snippet to an account outside of Mail.app - set yourself up a free gmail.com account as a test, for example, and see what that account gets.

Similar Messages

How to delete one perticular message from a user and not the whole messages

hi
i would like to know how can i delete a single message sent by a person and not the complete list of message received by me from the same person also how can i forward a message received by me

beesani
Sorry. ;( You can"t delete part of a message. You can only delete the entire message from that person.
will2b

HT201320 when i send an email using my hotmail address through outlook my contacts do not receive the mail. when i send the same mail through my iPad or iPhone no problem my contacts receive the mail. this only problem happens when i send mail with my mac

I have a hotmail email address. I compose my mail useing MS outlook. when i send the mail to my contacts useing my macbook air,my contacts tell me there have not received the mail.
when i send the same message with my ipad or iphone no problem my contacts receive the mail.
what is the problem?

Blair84 wrote:
Double check your contacts email, and if its incorrect, go to their contact and change it and save it or you can delete the email you put in, and manually type it in.
Hope this helps.
How would that help the original poster?

Why is it when I forward mails from my MAc, PC users don't receive the entire message.

Help!! Why is it when I send and emial out from my Mac, the other party can't receive the entire message?

You have two different issues: HP and Canon.
I don't know if I believe the Canon people. Windows XP has lots of different print options. Try installing Bonjour on Windows and then setting up a networked, Color Apple Laserwriter PS printer using "http://macmini.local:631" (assuming macmini is the name of your Mac). I have done this before (though not on a Canon). I am sure Canon will only support a standard configuration and this is not quite standard. Give it a try. It doesn't sound like it can hurt anything in your current setup.
For the HP, you might have to just wait for an updated driver from HP. HP has always had this problem. They are a huge printer company and I'm sure they get Apple hardware and OS versions before anybody else in the world. And yet, it seems as if they don't even begin working on their drivers until Apple officially releases a new OS. HP drivers are always the last to show up for a new OS and the first to break. If you get it working under MacOS 10.4.6, and then upgrade to 10.4.7, it is very likely that the HP drivers will stop working.
Unlike some of the other big companies, HP seems to have made the transition from Classic MacOS to MacOS X seamlessly. Their printer driver software works just as well on MacOS X as it did under MacOS.

How can I delete part of my message or forward part of it? I only see an option that allows me to delete the entire message.... Help please

How can I delete part of my message or forward part of it? I only see an option that allows me to delete the entire message.... Help please

hold your finger on the part of the message you want to delete. This will give you the copy and more option. Choose more, and then you will be able to choose the message or messages you want to delete. Once selected you will be able to tap the trash can icon on the bottom of your screen.

Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

Hi Richard,
Thanks for the reply - I think I've sorted it though and there isn't actually an issue.
The whole group wasn't receiving the NDR, only the group manager which I setup a few weeks prior. This is a new feature so it complies with certain RFC's, basically the group manager will recieive the NDR to let them know there is a problem.
Something to do with mass mailing and unsolicited mail.
Ta
Ian

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this.

Mail doesn't send certificate-signed message

Symptoms
When attempting to send a message in Mail that has been signed by a trusted certificate, a message appear that states:  "Unable to sign message You don’t have a trusted certificate in your keychain that matches the email address (sender’s email address). Without a certificate, you can’t sign messages sent from this address."
 The Compose window cannot be closed.
(same as describe for Lion in http://support.apple.com/kb/TS4222 )
Then, if you quit Mail and reopen it, the signed message reopen in its
compose window and can now be sent…

Symptoms
When attempting to send a message in Mail that has been signed by a trusted certificate, a message appear that states:  "Unable to sign message You don’t have a trusted certificate in your keychain that matches the email address (sender’s email address). Without a certificate, you can’t sign messages sent from this address."
 The Compose window cannot be closed.
(same as describe for Lion in http://support.apple.com/kb/TS4222 )
Then, if you quit Mail and reopen it, the signed message reopen in its
compose window and can now be sent…

My iPad has been hacked I cannot get into hotmail through mail also I get the apple message ,incorrect password even though this is correct what can I do

My iPad has been hacked I cannot get into hotmail through mail also I get the apple message ,incorrect password even though this is correct what can I do

From your description it sounds like your Hotmail account was compromised. Does anyone else know the password and could they have changed it?

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Did you find an answer to your question?
Would it also apply to Mountain Lion's Messages?
Thanks

How to send the entire binary file as Content in mail adapter

Hi,
I have the below scenario:
A binary file is there on the XI server and this is more than 1 lines.
This file needs to be sent across to certain email addresses via the XI interface.
I have made the design and config and now get the the mail but so far not been able to get the file contents.
The requiremnet is to send the entire file contents in the mail so that they appear in the body of the received mail.
How do i do it?
Can you please advice.
Regards,
Archana

Hi,
I am giving below the incoming mesasge details and the outgoing Mail message details.
Sender File Adapter:
Mesasge Content/Payload:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Ack_Mail_In xmlns:ns="Urn:Serco-com:interface:Banking:HSBC:FileTransfer">
- <Content>
- <Mail>
<Details>UNBUNOA:3HEXAGON-ABCABC10268002081201:2152+692125127893</Details>
</Mail>
- <Mail>
<Details>UNH1CONTRL:2:2:UN:APACS</Details>
</Mail>
- <Mail>
<Details>UCI1000246720ABC10268002HEXAGON-ABC4+C09</Details>
</Mail>
- <Mail>
<Details>UNT31</Details>
</Mail>
- <Mail>
<Details>UNZ1692125127893</Details>
</Mail>
</Content>
</ns:MT_Ack_Mail_In>
Receiver Mail Adapter:
Message Content/Payload:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>ME-Acknowledgement</Subject>
<From>email of from</From>
<To>my email</To>
</ns1:Mail>
I need to map the contents of the incoming payload Contents/Mail/Details (all the 5 instance) to outgoing Missing Content (after To field).
If it can be in Mail body, then it would be best else please suggest what other option can I use?
Also, If i want the file name to be in the subject of the mail, is that possible to be picked up in the configuration?
Please help.
Regards,
Archana

Can we send the same message two different recievers with sequence

Hi,
i am sending the same message to two different receviers without using BPM.
now i require to send with sequence.is it possible without BPM?

Hey
There are two options for this
First one is to use Wait step in BPM as other experts suggested.
Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
for bypass scenario,have a look at the following
How to send any data (even binary) through XI, without using the Integration Repository

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

How to send the same message to two SMTP servers

hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
ofer

hi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code---------------

Sending the fault message payload to sender using BPM.

I have the scenario where BPM splits a file into multiple record and each record calls webservice.
For a successfull call a success response is generated by web service . For a failed transaction a fault message is sent back which needs to be delivered to the sender's mail ID.
I am not able send the fault message payload which contains the error message details to sender ..
Please suggest what can be done for such a scenario. Is there any way by which error details can be sent to sender?
Edited by: trisha.b on Nov 28, 2010 7:23 PM
Edited by: trisha.b on Nov 28, 2010 7:29 PM

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Forwarding a selection of a message in Mail, without if sending the entire message

Similar Messages

Maybe you are looking for