Forwarding calls

Curious, when a phone number is forwarded to a phone is it then attached to the device or the original phone number on the device. Case scenario: if my husband forwards his number to my mobile phone and I then forward my number to my home phone/landline.
Which will be the result:
1) My husband's number will ring at home/landline (attaches to the number) or
2) My husband's number will ring at mobile phone (attaches to the device)

Test it, but I believe the answer will be #1

Similar Messages

  • Jabber for Windows 9.2.4 - Spinner freezes on "forward calls to"

    On Jabber for Windows 9.2.4 when we activate "Forward calls to" - the forward is set on controlled phone, however the spinner freezes (see image) and won't clear until a different phone is selected for control. Setting "forward calls to" "none" does not clear the spinner.

    Hi Mark,
    this is known issue: 'CSCui37305 - After forwarded call, "Setting call forwarding..." does not disappear' and it is already resolved in 9.2.6.
    Regards,
    Nebojsa

  • Possible to answer iPhone & then forward call?

    I would like to be able to answer my iphone 4, say hello to caller & then be able to forward call onto another number.
    I tried by adding 2 call recipients & merging our 3 calls, but when I hung up to let callers 2&3 talk , it disconnected all of us.
    it seems that the originating caller is the anchor of the conference call & that all will be disconnected if he/she hangs up.
    Am I missing something?  Is there another way to forward calls on an individual basis?  Maybe an app?
    thx

    Is this possible with an iphone?
    Not that I've heard of.  However,  peruse the App Store to see if there's any app available that will allow you to use the iPhone as a remote device. 

  • HT4994 I have an Iphone 4 and can not forward calls. every time I put the number in the call forward field it jumps back a page and the button moves to off. can anyone assist.

    I can not forward calls. I go to call forwarding, turn it on, copy and paste my phone number into the correct field (including the international dialling code).
    I then tap the Call Forwarding button, which takes me back one stage and the Call Forwarding button goes to off after a couple of seconds. Anyone who can help?

    Yes, a blocked call will go immediately to your voice mail.
    If you would rather not have that behavior, ask your cellular carrier if you can block that person through the carrier.

  • Can't receive forwarded calls on phone

    Help needed, Thanks!
    Just a moment ago I bought an online skype number intending
    to have incoming calls forwarded to my cell phone. (in us)
    However,every time although my cellphone is ON, the skype
    number test calls I make always tell me "You are reaching..
    please leave a message"... as if my phone isn't Turned on. Whhhhhy? 
    ALSO
    When I test call my skype contact from my the other skype account,
    (to test the 'forward skype call to mobile phone'function) it always
    show "connecting....connecting... connecting.................."
    I read "setting up forward calls" very carefully, the number is set
    correctly and the waiting time is only a few seconds, no reason could
    "connecting" takes that long.
    What is exactly wrong with this???
    Thank you sooooooooooooooooooooooooooooooooooooooooooooooo MUCH!

    This is how do not disturb works when you have an option selected to allow the second call within a short time to come through. Do you see a crescent moon at the top of your screen? If so you have Do Not Disturb turned on in settings.

  • JTAPI answer forwarded call

    Hi
    I've written a small app that registers as a CTI PORT and accepts calls, confers with a hunt group and then transfers once the call has been picked up by the hunt. (essentially creating hold music for the customer until someone in the hunt answers the call).
    I'd like to get 10 of these running simultaniously however cti ports can't belong to a hunt group - so my next thought was to add a forward ctifailure/forward busy/forward no answer to chain the cti ports together, but my problem is this:
    I can't get my application to answer a forwarded call - I can see the callchangedevents for it, but where I'd have answered the call for a normal call I get null when I do a getConnections(), obviously this means I can't transfer the call.
    is there a better (or easier) way to do this? or can anyone provide me with some insight as to why answering a forwarded call might not be working for me?
    thanks in advance
    this is running on CUCM6

    Isn't that how things work on a CCM? The continuing to beep (I'm not a 100% sure you can reconfigure that) seems to be a standard for Cisco (and various SIP phones for that matter), whereas other PBXes take the device on hook after a few beeps.
    There's also Call.drop() though I've never used it.
    Even on the Alcatel systems I work with.. when I drop a call via CTI, the device plays the busy/reorder tone (as you know in Switzerland they're both the same ;) for a few seconds, and then goes on hook (and that behavior is a standard feature for this PBX).

  • Forwarded call to cell phone is not displayed with...

    I have a subscription allowing me to let calls to my skype online-number be forwarded to my cell phone. Now, if someone calls my skype number and is forwarded to my cell phone, my cell phone only shows "unknown". This is also the case, if the person calling me and being forwarded has activated his phone to show its number. So it has to be a setting inside the skype-program. How can I change this setting to let the number calling me being displayed on my cell phone?
    Thank you, I appreciate your help very much.
    Solved!
    Go to Solution.

    faju wrote:
    I have a subscription allowing me to let calls to my skype online-number be forwarded to my cell phone. Now, if someone calls my skype number and is forwarded to my cell phone, my cell phone only shows "unknown". This is also the case, if the person calling me and being forwarded has activated his phone to show its number. So it has to be a setting inside the skype-program. How can I change this setting to let the number calling me being displayed on my cell phone?
    It is possible that the telephone network is not passing the Caller ID information along.  This is the case in certain countries, even if the caller has enabled Caller ID and you have set a number in your Skype account to be used as Caller ID.  Have you done that yet?  Log into your account here on the Skype web site using the "Account" link at the top of this page to see your Skype account's Caller ID settings. 
    If you have Caller ID set up on your Skype account, sometimes you will see your own Caller ID number when calls are forwarded from Skype.  Other times, it may be "unknown" or a series of digits.  Unfortunately, Skype does not have control over all of this, since Skype works with partners in many countries to provide services using the telephone network (making calls to or receiving calls from telephones, forwarding calls from Skype to a telephone number, Caller ID, etc.). 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Forwarding calls to iPhone

    I have been forwarding calls from another phone to the iPhone. When those calls come to the iPhone, it rings and there is a message that pops up, which says there is a call being forwarded to it. Sometimes the message disappears, but sometimes it doesn't, not letting me answer the call. Has anyone else had this problem?

    I am forwarding my Verizon number to my iPhone and I do get the pop-up but it allows me to tap on it and it disappears which then allows me to either accept or decline the call.
    t60p   Windows XP Pro  

  • Nokia 1520 - how to forward calls?

    Hi. In setting>phone.......there is no option for call forward on Lumia 1520
    Moderator's note: We amended the subject as the post was moved to the appropriate board.
    Solved!
    Go to Solution.

    Hi,
    Welcome to the forum.
    Here's how to activate call forwarding:
    Tap Phone >  > settings, or tap Settings > network+‎, depending on your software version.
    Switch Call forwarding to On.
    Type in the phone number in the Forward calls to box, and tap save.
    To check if call forwarding is being used, tap the top of the screen. This icon should show up. 
    Note: You may need to contact your network service provider to get this service.
    Besides forwarding calls to another phone number, you can also forward these calls to your voice mail and listen to them later.
    Tap Phone >  > settings, or tap Settings > network+‎, depending on your software version.
    On first use, type in your default voice mail number in the Voicemail number box.
    If necessary, switch Use default voicemail number to On.
    Switch Call forwarding to On, and type in your voice mail number in the Forward calls to box.
    Note: You may need to contact your service provider to get this service & to get the default voice mail number.
    Hope this helps.

  • Forwarding calls by localization

    Hello.
    I would like to have forwarding calls by localization on my iPhone. I would like to transfer all my calls from my iPhone to my home phone automatically each time I enter in my appartement. It's really annoying to do activate the fonction manually each time I enter at home and deactivate each time I go out. Sometimes I even forget and then I miss calls.
    I don't have a good net in my appartement and I cannot really enjoy my iPhone at home. Plus, I have good nice home phones which I would like to use for all my incoming calls. It could be very useful to have this fonction integrate in the iOS system. Or at least an application for that, like Android have.
    Thank you a lot.
    Angelo

    I am forwarding my Verizon number to my iPhone and I do get the pop-up but it allows me to tap on it and it disappears which then allows me to either accept or decline the call.
    t60p   Windows XP Pro  

  • Forwarded call notification

    I am forwarding calls from my work phone to my private iPhone 4.
    On my old Nokia, there was always arrow symbol for all forwarded incoming calls.
    I am using the same service provider.
    Can I set this by settings or additional App?
    Arnis

    As you say, when you receive a call that has been forwarded you will only see information about this see for a couple of seconds when it starts ringing. The call list will not show if a received call was forwarded and i'm afraid i don't know of any way to change this.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Incoming forwarded calls / ringtone problems....

    Hi guys,
    Hopefully someone can help!! I have a Blackberry Curve 8310, which I use as my direct number for work, but work also have another number forwarded to my phone for short periods of time over the course of a month.
    When someone rings my phone normally, their number displays on my screen, and the phone rings.
    When someone calls the number which has been forwarded to me, a message pops up saying something along the lines of "Unconditional forwarded call", then the number of the person who is calling displays, and the phone rings.
    What I want to do is have a different ringtone for the second type of calls, so that if i miss the message that is displayed on screen, i know its a call which has been forwarded to me!
    I've searched the internet and it seems a few people have asked the same question but have yet to read any helpful replys.
    Can anyone help?
    ps: Just to make it clear, the number that displays on my phone for these forwarded calls is that of the original caller, not the number of the phone that the call has been forwarded from.
    Thanks in advance!!

    There is no indicator for forwarded calls.

  • Gathering call data on forwarded calls in Attendant Console

    Hi, Does anyone know if there is a way to get call data for forwarded calls. Specifically calls forwarded to an extension from the Cisco Attendant Console.

    you could try CAR but there is no specific report for what you're looking for
    HTH
    javalenc
    if this helps, please rate

  • 1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

    Hi. please solve my problem.
    .call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
    thank you in advance.

    Hi Ersin,
    Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform.  However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module.  I can think of no reason why the different calling method would be a factor.
    When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
    Regards,
    Nick

  • I need to forward calls to my boss (when he travels) how can I do this without listening in on the conversation?

    My boss travels a lot and I need to forward calls to his cell (Iphone 5).  If I conference the calls I cannot disconnect and therefore have to mute my phone.  There has got to be some way I can just transfer the call to his phone.  Any suggestions???

    Hi heathers,
    You would need to print the file to a new PDF with the appropriate page size.
    Best,
    Sara

  • Why iphone 5 no indicator forwarded call?

    why iphone 5 no indicator forwarded call? in all the old phones have a display pereadrisatsii, and no iphone 5 when I forwarded to the caller's number

    No, you do not understand! there is a phone with sim1 it the diversion to iphone 5 c sim2. When an incoming call on iphone 5, there is no information / indicators which sim call me, that's too bad: (

Maybe you are looking for