Forwarding Email on Treo Pro?

I do not see any option to forward an email from the treo pro. only repy. Please advise.
Post relates to: Treo Pro T850 (Sprint)
ok...found it. You have to tap reply first then it takes you to another drop down menu to forward.
Message Edited by amyprurealtor on 07-01-2009 07:49 PM

Pssst, you can mark your thread solved if you want people to ignore it.

Similar Messages

  • Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct

    I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
    -Jay- 
    Post relates to: Treo Pro T850 (Sprint)
    This question was solved.
    View Solution.

    audiojay11 wrote:
    P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
    Try adding it to the server name, e.g.: smtp.provider.com:587

  • Cannot send email with Palm Treo Pro

    Hi,
    We have a Palm Treo Pro that was previously configured to sync with exchange 2003 and at the same time also had an IMAP email account setup for another email address.  We have since removed the Exchange email account and only have the IMAP account configured.  Since removing the exchange account we can no longer send email from the phone, but can receive fine.  The error we get when trying to send is listed below.
    "The message(s) could not be sent.  Check that you have network coverage and that you account information is correct then try sending again"
    The connection is fine because we can receive email and browse fine.  The account information is also correct.  We are using the SMTP server settings for the phones provider and that requires no authentication.  I have also tried a different SMTP server with the appropriate user credentials but still get that message.
    I have contacted the phone provider (Telstra) but they were no use.
    We did have to load on a self signed certificate to get the exchange email working and I dont know whether this is causing any issues.
    If anyone has any ideas it would be greatly appreciated

    Maybe this will help. If you monitor the "More Like This" box, other threads appear. Opening them usually displays other threads.
    http://https://discussions.apple.com/message/19122030#19122030
    http://https://discussions.apple.com/message/18048618#18048618

  • Exchange email account disappears on treo pro

    activesync works great on my treo pro with my corporate outlook exchange email account. but over the past two weeks, the exchange account has simply disappeared three or four times from my phone. (it is the only active account i have. i also have a yahoo account on the phone but it is set to manual updates.) for some reason the exchange account name and details are simply no longer in my list of email accounts and also not available in activesync.
    this has happened most when i have not used the treo for a few hours. it is easy to reestablish the account by re-entering password etc and then re-sync everything. but it is also a troublesome pain. does anyone have an idea why this might be?
    Post relates to: Treo Pro T850U (Unlocked)

    I've never heard of the account simply disappearing. I would try a Hard Reset of the device and see what happens after that. If it continues to happen after a Hard Reset, you might want to talk to your Exchange Admin and see if they are kicking you off.
    Post relates to: Treo 800w (Sprint)

  • Email setup on Treo Pro

    I live in Australia and use the carrier Telstra but there are no aussie support forums.
    I have set up my email for my Internode Pop 3 account the same way I did for the old Palm Centro and as per instructions on the Palm site. The Palm Centro worked fine but I cannot get email with my Treo UNLESS I also have my wifi on and near an access point. Just trying to get it through the phone as I did with the Centro does not work as keep gettin g"error synchronising" as soon as I hit send/receive. I assume it is probably something simple I am doing wrong given that the actual settings work through wifi but Telstra are hopeless and really no one seems to know anything here about this particular model. I use WAP as my network as I did previously but not sure if I should be using another network eg My ISP? Realise many of you would have no experience with Telstra but any advice appreciated.
    Post relates to: Treo Pro T850U (Unlocked)

    The Australian support number - depending on where you call from - is either continuously busy, or is 'out of service'.
    Given that it's no longer listed on the Palm page, I'm going with the latter.
    I tried contacting the US via live chat, but they absolutely refused to help me because I was supposed to be using Australian support options, so, yet again, no help.
    Contact Palm by telephone
    Palm telephone support is offered on a chargeable basis.
    Hours of operation: 09:00 to 17:30 (local business hours)
    UK: 0207 867 0108
    Denmark: 3544 5573
    Finland: 09 8171 000
    Ireland: 01 605 8382
    Norway: 2 350 0093
    South Africa: 0800 995 070
    Sweden: 08 519 92029
    Palm is now HP - it's official - learn about the merger
    Palm continues to offer the support services above for all Palm-branded products.

  • Palm Treo Pro - suddenly lost Messaging email and SMS?

    Currently travelling overseas and no probs first few days but then was in Port Isaac with "no signal" and switching carriers and lost messaging - emails, sms etc. I can make outgoing calls and  receive them but can't receive SMS. I can access web for weather updates, Facebook etc. I have done a few few soft resets with no success although one time I got an error message about device.exe - not every time though. The messaging won't work either through the nominated button or through the menu item. I do get the "thinking" whirling ball for 10s while it tries but nothing starts. Has my device.exe become corrupted somehow - can I replace it or do I need a hard reset? Should I install 6.5 if that is the case - don't really want to lose all contacts etc
    Any comments appreciated - it is driving me nuts!
    Post relates to: Treo Pro T850U (Unlocked)

    It is strange if web browsing works but not email. Unlike SMS, email should be using the same data connection as web. Are you roaming with your provider's SIM card or are you using a local SIM card?
    I generally get a device.exe error if I close a program and it doesn't close correctly, or very occasionally if a program crashes for some other reason. I don't think I've seen it during startup. I doubt that the file has become corrupted, although I suppose it's possible.
    There is no (official) 6.5 update for the Treo Pro.

  • Deleting emails on computer with Treo Pro

    Previously, I had a Treo 750 that would wirelessly sync with my office Outlook. I now have a new Treo Pro. It is syncing fine, but whenever I delete an email at one location, it is no longer automatically deleted at the other. How do I set the Treo Pro where deleting an email on my phone deletes that message on my computer's MSN Outlook, and vice-versa?
    Post relates to: Treo Pro T850U (Unlocked)

    Are type of email is it? POP or IMAP?
    try going to menu then tools then options, tap on your email account then tap on edit account..
    hit next until you are under automatic send receive option. below tap Advance settings, in there you should see "when deleting messages" option. try each one and see which will work. 
    Post relates to: Treo Pro T850U (Unlocked)

  • Unable to get Data Connection on Treo Pro after Flying (Sprint)

    I got my Treo Pro a few weeks ago and have really had no issues. It has been a great phone, but I just ran into an issue I cannot explain.
    I had to fly from Mpls to Miami and put my phone in "airplane mode" when the flight started. When I landed I took the phone out of "airplane mode" and was able to get voicemail and make calls. However, when I tried to get email or open a browser session the phone kept giving me an error. It was trying to dial #777 to begin a data session (I think) and said it was unable to make a connection. I removed the battery and forced the phone to reboot and everything work just fine.
    Someone I traveled with suggested I give it some time to "sync" up with the network, so on the return trip I just let phone continue to try and establish a session for about an hour. After an hour with no email I got frustrated and rebooted the phone... again everything worked just fine. Am I going to need to reboot this phone every time I travel? Is there something I am missing here?
    Is anyone else seeing this? Is it a Sprint Issue? Please help. Thanks in advance.
    Dan
    Post relates to: Treo Pro T850 (Sprint)
    This question was solved.
    View Solution.

    Hello and thank you for using the Palm Help Forums!
    That's strange and I've never heard of this issue. I usually don't jump to this method of troubleshooting right away but I do not have any other idea to resolve this issue. Try to do a hard reset on the device. A hard reset will erase all data on the device and restore settings back to default. Be sure to back up all data on a computer to Outlook via Activesync or Windows Mobile Device Center (WMDC). For further information and instructions on hard resets please visit kb.palm.com and look up article number 43146 in the solution id search field.
    Please let me know if you have any further questions or concerns.
    -Pat 
    Post relates to: Treo 800w (Sprint)

  • Treo Pro will not sync with Vista SP1

    I'm really hoping somebody can help me here.  I just replaced my aging 700p with the long-awaited Treo Pro (Sprint).  I've actually been looking forward to getting fully Windows-based, since my 700p syncing was routinely problematic - always having to do workarounds and plug in the cord just the right way, etc...
     Let me try to give you the flow so far.
    I have Vista SP1
    I get Treo Pro
    I plug Treo Pro into Vista, SP!, all ready to sync up my Outlook 2007 data.
    Treo Pro fires up a very impressive looking installation routine.
    Routine seemingly works fine - getting me to the point where you unplug and reconnect your device to do your first sync
    I reconnect, and hear the Windows "USB connect" sound, then.... nothing.
    I open WMDC and it says "not connected"
    I open "USB to PC" on the Treo, and uncheck the "advanced networking" box as suggested by some other posts.
    Windows sees the difference and installs a couple of other drivers.
    Windows connects, gives me the "USB connect" sound, and WMDC says "not connected"
    The Treo appears to attempt a sync, but finishes with a message "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer. "
         HUH?  ActiveSync only works with XP - of course I can't install that!
    By the way, I tried the same thing with my Vista SP1 laptop. Same exact results.
    Also, at no time have I seen the WMDC icon in the tray area. (I remember having a Nino way back when, and the ActiveSync icon was down there)
    I thought this was supposed to be easy - Windows PC, Windows device.  Piece of cake, right?  Not so.  If I cannot get this thing to connect, I'm getting a Centro! (not my first choice....)
    A thought... any chance this could have to do with having Palm Hotsync still installed (from my Treo 700p)?
    Any help would be GREATLY appreciated!
    Post relates to: Treo Pro T850 (Sprint)
    Message Edited by finalewiz on 03-29-2009 09:02 PM

    On Windows XP, having HotSync installed didn't interference with using ActiveSync with a Treo 800w. This is not exactly the same as your setup, but close enough that I think HotSync is not likely to be the problem.
    How did you install WMDC? The downloadable User Guide (PDF pp44-46) refers to running the PC Setup program. Did that part go as expected?
    I don't use Vista, so I'm not familiar with the additional complications that might be involved...
    Post relates to: Treo 800w (Sprint)

  • Not Receiving Forwarded Email from Redirector

    I've installed Desktop Manager v4.7 on a Windows XP Pro with SP3 on an Exchange server.  I have a Bold with BES hosted on a different 3rd party Exchange server.  The redirector indicates that the email has been forwarded with 0 expired, filtered, or pending.  The result to the last transaction to the device indicates delivered, but no email show up on my BB.  The strange thing is that it initially worked and then stopped.  I've removed and reinstalled the Desktop Manager with no success receiving the "forwarded" email.  I would appreciate any suggestions to find where these emails are being "forwarded" to or how to receive them.  Thanks.

    Hi,
    Did you select “Directory Management Service” option, if so, please make sure you configure the Central Administration application pool identity account to have the Create, delete, and manage user accounts right to the container that you specify in Active Directory.
    Did you install Exchange server 2003 in your MOSS environment? If so, you should add an SMTP connector in Exchange Server, if you don’t know how to do that, you can post your issue into the following forum:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploy/threads
    Also, please check whether your configuration meet the following requirements, If not, correct them and check the effect.
    ·         The application pool account for Central Administration, the logon account for the Windows SharePoint Services Timer service, and the application pool accounts for your Web applications should have the correct permissions to the e-mail drop folder.
    ·         The domain controller running Active Directory has a Mail Exchanger (MX) entry in DNS Manager for the mail server that you plan to use for incoming e-mail.
    For more information about how to configure incoming e-mail settings, please refer to the following article:
    Configure incoming e-mail settings
    http://technet.microsoft.com/en-us/library/cc262947.aspx
    Introduction to incoming e-mail
    http://office.microsoft.com/en-us/sharepointtechnology/HA100823061033.aspx
    Demo: Configure a SharePoint Server 2007 site to receive e-mail
    http://office.microsoft.com/en-us/sharepointserver/HA102047921033.aspx?pid=CH101788401033
    Enable and configure e-mail support for a list or library
    http://office.microsoft.com/en-us/sharepointtechnology/HA100823071033.aspx?pid=CH101215271033
    Rock  Wang 
    Rock Wang– MSFT

  • Pairing my Palm Treo Pro with my car

    I keep trying to pair my treo with my car (bluetooth) and it asks for a code - I have no code so press next - it then says I can't connect incorrect code, but my car system then gives me a code that I enter in - and it says I cannot connect, incorrect code!
    I had this problem with my last Treo and then soemone else paired it for me as they had a code from an engineer which allows you then to enter the car code - does anyone know the code?  I have tried 0000 and 1234 and 9999 - any suggestions? 
    Post relates to: Treo Pro T850U (Unlocked)

    benglish60 wrote:
    I guess you and I are the only ones with the Palm treo Pro as I cannot find any other info on it.
    Actually, I have the slightly older Treo 800w, but the mail programs are similar. The problem with this board is the launch of the Pre has flooded the forums with posts about webOS...
    benglish60 wrote:
    I have two options on setting up Email.  One as outlook on the Palm or as a POP.
    If I setup as Outlook, it will go to my COMPUTER only if I hot sync it.
    Setup as a Pop, it gets my EMail on a regular schedule.
    In the Outlook setup mode,as I said it ONLY downloaded what I had on my Computer in outlook.
    Do you know of a way to have it actually get real time mail via the outlook settings vice a pop3?
    As far as I know, Windows Mobile doesn't offer that. I think you will need two accounts set up. One will be sync'd with Outlook for Contacts, Calendar, and Tasks (Email would be optional here). The other would be a standard POP3 account to retrieve and send email in real time. Unfortunately, the Sent Items on that account will not be sync'd to Outlook
    benglish60 wrote:
    Also What Good does the Wifi do?  I have my working and it it connected, but I do not see it doing anything.
    as I have a very very weak Sprint Signal in the house, even getting my Email is hard, but If there were someway to use the Wifi to connect to the internet, that would be fine.
    You can use the Wireless/Connection Manager to turn different radios (CDMA, wi-fi) on and off. If you tap the connection icon at the top of the home screen, you can access it from there. You might need to turn off your cellular data connection in order to take advantage of wi-fi, but you might want to check the user guide, as it might be the other way around.

  • Alltel Palm Treo Pro picture messaging

    I have followed the instructions, made sure thru Alltel I still had picture messaging and still can't send a picture message.  It seems as if it is being sent properly- when it arrives the screen is only white with my signature on the bottom.   After sending it also seems to lock up my Today screen if I attempt to see messages.  The picture sent is one taken with the phone- it goes out under 300k, and with the white screen it shows up as a 1k; but if you go to the sent file it show up still at 300k.   The phone is new- so there is no memory issues Any help would really be appreciated
    Post relates to: Treo Pro T850 (Alltel)

    My wife has this exact phone and has the exact same problem, did anyone ever solve this.  We have alltel. THis is rediculous, a brand new phone and all over advertises that you can picture video and text message with it but of course as usual it is lies. Just like all the other BS alltel has pulled on me. I digress. Palm Pro has newest arcsoft on it and video messages do receive as well as pictures sent though email account using the phone but a real picture message mms just shows up white screen with sig at bottom. When looked at with file explorer on my htc and on my other palm the "attachment" is only 1k and is named temp. WTF is going on here does anyone know?

  • Palm Treo Pro New SMS

    Is there any programs or settings one can change to add some notification for new SMS? Most other phones have a blinking LED or a message floating on the screen saver for new SMS and emails, but the Treo Pro has nothing.
    I often have my phone setting aside and when in sleep mode, I am unaware of new messages or emails until I turn the phone off sleep mode. 
    Post relates to: Treo Pro T850 (Sprint)

    I posted a suggest in your other thread here:
    http://forums.palm.com/t5/Palm-OS-WinMo-Software/Re-Led-notification-issue/td-p/315405

  • Receiving Email Accounts to Pro

    My email accounts will not sync. They are set to auto receive, however they don't and when I click Send/Receive, they say connecting, and then disconnecting and the disconnecting lasts Forever. I have to click stop send/receive to get it to stop. I just want to be able to check my emails!! Please help.
    Post relates to: Treo Pro T850 (Sprint)
    This question was solved.
    View Solution.

    Sometimes I find with Windows Mobile 6.1 on the Treo 800w I have to do a soft reset when the connection is acting up. Almost always behaves correctly after that.

  • Intermitte​nt Calendar Sync, Outlook 2007, Exchange 2003, Windows Mobile 6, Palm Treo Pro.

    Hello,
    We are having a problem with a couple of our devices, one being a Palm Treo Pro.
    The users have noticed that some of the calendar appointments they receive are not always updating in either their outlook, or on their device, it is apparently random as to whether it updates to the device and not outlook or vice versa.
    That is as much detail as I currently have; I am asking them to supply more observations as I know this doesn't give us alot to go on but thought I would ask in case someone else has experienced similar issues.
    The other thing I noticed is that the windows update tool fails to work with the following message: "Connection to the update server not available. Check data connection setting and ensure device date and time are correct."
    The date and time are correct (live in the UK) and they can access the internet and emails on the device to connection settings must be working.
    Any help would be much appreciated.
    Thank you,
    Marc 
    Post relates to: Treo Pro T850 (Bell)

    Is this only from the phone to the PC? Or from the PC to the phone?

Maybe you are looking for

  • Can I edit image size in the TOC?

    Is it possible to edit the size of the image placeholder used for the TOC in CP5? I'd like to use it for a company logo to free up some design space and keep marketing happy, but I can't make it big enough. Unfortunately I don't have access to Flash

  • How can I separate just a message that has been mis-threaded?

    I thread all of my messages as it helps keep them organized. I occasionally run across a message that is mis-threaded. Totally unrelated to the thread it has been included in. How do I separate out just that mis-threaded message and keep everything e

  • Enlarging root filesystem of the VM Server

    Hey everyone, I have a Oracle VM environment up and running in test: 2 servers in a server pool with 5 virtual machines. Now I want to add a nbew Virtual disk of 100 Gb to I virtual machine, but I get the error that 31 Gb is the max size I can alloca

  • Cannot Edit a pantone color in illustrator

    Has anyone encountered the problem of not being ablw to edit a pantone color in illustrator? I'm trying to switch it to process CMYK and the top portion of the editing box is ghosted out. Solution? Thanks !! Ron

  • Itunes won't download on my computer it goes into an error

    Hey i just got a new computer its a compaq, and i just got my ipod also. So i want to download itunes into my computer and it goes into an erro it says C:/Documents and Settings/Compaq_Administrator/Desktop/itunes Setup.exe is not a valid Win32 appli