Forwarding messages to more than one person at a time, how in the heck do i do it ??

I recently got a new phone, and am trying to learn how to send messages to more than one person at a time. It is a Samsung Gem. 
Thanks so much people,
Gayle

Gayle1963 wrote:
I recently got a new phone, and am trying to learn how to send messages to more than one person at a time. It is a Samsung Gem. 
Thanks so much people,
Gayle
Hi there!
I hope you are enjoying your new phone.
In order to forward a text message to multiple people, just long-press on the message you want to send and select 'Forward'. In the 'To:' field begin typing the first persons name, then hit the 'enter' key. This will typically move the cursor down to the message, just tap on the 'To:' field again and begin typing the second person's name, and so on and so forth until you get all the people included.
Keep in mind, if you have a limited texting package that sent messages are billed per recipient. Example, if you forward a text to 10 people, then 10 messages go against the allowance.
Have a great day!

Similar Messages

  • I have Firefox 7.0.1 and would like to go forward and back more than one page at a time- how do I set this?

    I used to have Firefox 6 that let me jump forward or back more than one page

    You can right click on the back or forward button and jump to your required page.

  • Send SMS text message to more than one person at a time

    How do I do that?  Do I need additional software?

    I think seven or eight is the limit.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Sending a Text Message to More Than One Person...

    How do i send a single text message to more than one person? Is that possible?

    Not possible at present. It's on the list of feature requests. We hope an update will add this feature in the near future.

  • When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

    while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

    I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
    "How do I text message multiple people at once?"
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html
    Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
    (If this has answered your question, please mark your original post as answered)

  • HT5622 Can Face Time be used to connect with more than one person at a time?

    Can I connect with more than one person at a time when using Face Time?

    You mean like a conference call?  No, unfortunately.

  • HT204380 Is there a way to talk to more than one person at a time on FaceTime?

    Is there a way to talk to more than one person at a time on FaceTime?

    No. 
    OT

  • Creating form - want to change font style and size in more than one field at a time HOW??

    creating form - want to adjust font style and size in more than one field at a time - HOW??

    Select the fields with the mouse, right-click one of them, go to Properties
    and set the settings you'd like them all to have.
    On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]>

  • Firefox won't let me open more than one window at a time. how do i fix the problem

    Firefox won't let me open more than one window at a time. It use to allow me to open multiple windows before but for no apparent reason it stopped. I uninstalled it and re-installed but I'm having the same problem. How do I fix the problem
    == This happened ==
    Every time Firefox opened
    == several days ago

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Why can I not send a text to more than one person at a time on my iphone 5

    I have an iphone 5 IOS 8.1.3, and I can only send text messages to one person at a time. I cannot send GROUP text messages. It will then tell me they are not delivered.  What is wrong? How can I correct it?

    Send a group message with your iPhone, iPad, or iPod touch - Apple Support
    Send messages with your iPhone, iPad, or iPod touch - Apple Support
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support

  • My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?

    Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I want to send  a text message to more than one person!

    HOW?

    Well, I was typing up a solution for ya and decided to test it to see if it still worked, but apparently it doesnt, at least not with cingular/at&t. You used to be able to send text messages to people via e-mail by using their [email protected] The syntax might have changed. I would check into this and see if it's available for AT&T still and for the networks the other people you want to text at the same time are using. Add that as the person's e-mail address in your contact list and just e-mail them all at the same time on the iphone.

  • How do I send, or bcc to more than one person at a time?

    I have used outlook express for years and grown very familiar with it. I switched to Thunderbird because of mail problems in WIN7. I have no problem receiving, or sending to one person. The email autofills the name of the first person, but when I try to type another name, the first is deleted. This is the same on TO: or BCC. Also, is there a way to avoid having to click on the field "show remote content" on every message.
    Thanks for any assistance.
    Norman

    I missed your 2nd question.
    This article explains how to always show remote content and the risks of doing so. You can make that call. Adding your trusted senders to your address book will allow content from them and is the recommended action.
    http://kb.mozillazine.org/Privacy_basics_(Thunderbird)

  • Addressing a message to more than one person

    when I try to address a message and send it to another person in the cc line, the program removes the name in the To line.
    This has only happened since the program was updated. Anyone know how I can fix this. Please send the answer to
    [email protected]

    I suspect it's just scrolling the first address up and out of sight.
    If you hover your cursor over the divider between the addressing space and the message text space, you should be able to grab the divider and drag it down to make more space for the addresses. I expect the lost topmost address to reappear.
    You may also find if you hover the mouse cursor over the addresses that a pop-up appears, summarizing the entered addresses. If this doesn't happen, there's an add-on that provides this.

  • Texting more than one person at a time.

    First of all, I love the iPhone. This isn't a complaint just more of a request.
    Mass text messaging.
    On all of my previous cellphones I've been able to send the same text message to multiple people at the same time. This does not seem possible with the iPhone. I like telling people what bar im at so they can come buy me shots.
    If any Apple people read these forums please send this suggestion up the chain!
    Thx!

    I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
    "How do I text message multiple people at once?"
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html
    Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
    (If this has answered your question, please mark your original post as answered)

Maybe you are looking for