Forwarding on Sun Convergence!
Hi !
On Sun Convergence, Forwading tab, I add an email address ( gmail), when customer send mail to me, I get that mail normal but that mail does not go to gmail and my customer received the following mail:
Your message cannot be delivered to the following recipients:
Recipient address: <mygmail>@gmail.com
Original address: [email protected]
Reason: Illegal host/domain name foundPlease help me solve this problem!
./iwcadmin -version
Sun Convergence 1.0-10.01 (built September 6 2009 - 18:26:20)
ergwertwrtfre wrote:
Why back-end don't move this message for front-end send to gmail ? By default the MTA will attempt to deliver the email based on the MX record of the domain of the recipient (gmail.com in this case).
You need to configure the back-end MTA to send the email to the front-end or you could enable LMTP from the front-end => back-end which would cause the mailForwardingAddress: expansion to occur on the front-end.
To get the back-end to relay external-bound emails (tcp_local) to the front-end MTA, make the following changes on the back-end MTA:
a) Add daemon <front-end hostname> to the tcp_local channel definition in the imta.cnf file.
b) Change the tcp_local channel definition in the same imta.cnf file so that "mx" is "nomx" and "single_sys" is "multiple"
So you should have something like:
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel daemon frontendmta.domain.com
tcp_auth loopcheck
tcp-daemonc) Run ./imsimta cnbuild;./imsimta restart
To use LMTP between the front-end and back-end refer to:
http://wikis.sun.com/display/CommSuite/LMTP+Delivery
Regards,
Shane.
Similar Messages
-
Url forwarding in sun one web server 6.1
Hi,
Can we use wild char patterns in url -forwarding in sun one web server 6.1
For example http://myserver.com/*.do
to
http://anotherserver.com/*.do
http://myserver.com/*.jsp
to
http://anotherserver.com/*.jsp
appreciate your reply
thanksyes, you can.
http://docs.sun.com/source/819-0130/agcontnt.html#wp1017783 -
Sun Convergence - correct version of GF
Hi,
I'm looking for release document where I can find infromaction which version of GF is the best for Sun Convergence.
I have Sun Convergence with patch 10.01_182930 and GF v2.1 Patch05 (9.1_02 Patch11). I wonder if I can install the latest patch of GF with my Convergence ... and which GF should be correct to the latest Convergence (patch 11).
IrekNarenLahoti wrote:
yes you can install GF v2.1.1 Patch07 (9.1_02 Patch13)
Glassfish 2.1.1 Patch 07 is available from sunsolve:
128643-15 => Solaris Sparc
128644-15 => Solaris x86
128645-15 => Redhat Linux
This version fixes the following issue which is important if you are using Convergence with the IM service enabled:
bug #6875041 - "Grizzly leaks ConcurrentLinkedQueue when having Comet"
Also note that the upcoming Convergence patch 12 will have a number of IM related fixes:
bug #6632069 - "IM client disconnects automatically"
bug #6878227 - "IM Users status go unavailable shortly after logging in to IWC"
bug #6894013 - "im connection/session is lost when RID mismatched"
Convergence patch 12 should be available in ~2-3 weeks from Sun support.
Regards,
Shane. -
How do Sun Convergence Communicate with LDAP?
Please tell how do sun convergence communicate with LDAP server.what api do these calls use.and where do we can find it.
Looked at the login page,it is was calling iwc.protocol.iwcp.LOGIN_URL variable.
login_url was assign as below:
iwc.protocol.iwcp.LOGIN_URL = iwc.config.session.contextPath + "/svc/iwcp/login.iwc";
please let us know what is iwcp ?
And what is contextPath its refering?
Also please let us know what kind of frame work does convergence uses to communicate with LDAP.
If possible,advice some documentation to read about this function.
thanks in advance
Edited by: testxtest on Jul 14, 2009 12:50 PMtestxtest wrote:
Please tell how do sun convergence communicate with LDAP server.Convergence uses the standard LDAP protocol to access data from the LDAP servers.
what api do these calls use.and where do we can find it.The LDAP protocol technical specifications are defined here:
http://tools.ietf.org/html/rfc4510
Looked at the login page,it is was calling iwc.protocol.iwcp.LOGIN_URL variable.
login_url was assign as below:
iwc.protocol.iwcp.LOGIN_URL = iwc.config.session.contextPath + "/svc/iwcp/login.iwc";
please let us know what is iwcp ?What is it you are trying to achieve?
And what is contextPath its refering?The "contextPath" is the Convergence server URL base for the current session e.g. http://server.aus.sun.com/iwc
Also please let us know what kind of frame work does convergence uses to communicate with LDAP.The Convergence server uses java ldap-pool libraries.
If possible,advice some documentation to read about this function.Once again, what is it you are trying to achieve, and most importantly, why?
Regards,
Shane. -
Calendar tab does not appear on Sun Convergence
Hi;
I have a problem.I installed sun communication suit 6 update 1.I have logged the system but does not appaer calendar tab on sun convergence.I don't solve this problem.How could i solve this problem?I see iwc log file.i see this warn.
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.UserPrefsCommandDelegate Thread httpSSLWorkerThread-80-4 at 2009-02-25 15:24:36,632 - get_allprefs.iwc : Service is not enabled : cal
PROTOCOL: INFO from com.sun.comms.client.entity.user.sun.CommsUser Thread httpSSLWorkerThread-80-4 at 2009-02-25 15:24:36,633 - SMIME Service is not enabled for server
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.UserPrefsCommandDelegate Thread httpSSLWorkerThread-80-4 at 2009-02-25 15:24:36,635 - get_allprefs.iwc : Service is not enabled : smime
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.agent.ClientOptionsAgent Thread httpSSLWorkerThread-80-4 at 2009-02-25 15:24:36,637 - client preferences not found for domain: <domain name>
Help me..
regards.
thanks all..[email protected] wrote:
I installed sun communication suit 6 update 1.Did you install Communication Suite 6 update 1 on a Solaris or Redhat Linux system?
I have logged the system but does not appaer calendar tab on sun convergence.What mechanism did you use to create the user (e.g. Delegated Administrator GUI)?
What service package did you assign to the user e.g. mars, earth?
Do you see the Calendar Tab for the user if you log into Communications Express?
I don't solve this problem.How could i solve this problem?I see iwc log file.i see this warn.
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.UserPrefsCommandDelegate Thread httpSSLWorkerThread-80-4 at 2009-02-25 15:24:36,632 - get_allprefs.iwc : Service is not enabled : cal The user in question doesn't appear to have the Calendar Service assigned. Please provide an LDIF of the users entry from the directory server.
Regards,
Shane. -
Sun Convergence Corporate Directory doest show record
Sun Convergence 1.0-4.01 (built December 8 2008 - 14:58:01) with latest patch T128640
After login successfully into convergence. click on address book tab, the cooperate address book doesn`t show anything record. Below is the error logs show.
ADDRESS_BOOK: ERROR from com.sun.comms.client.ab.abutil.ABUtils Thread httpSSLWorkerThread-443-9 at 2009-05-15 11:36:24,861 - getDbKeyFromPSRootXML(): psRoot DOES NOT start with ldap://Duplicate posting, refer here: http://forums.sun.com/thread.jspa?threadID=5386604
-
Maxmessagesize for each hosted domain on Sun Convergence.
Hi
When I set service.http.maxmessagesize, service.http.maxpostsize parameters is 20MB, all hosted domain in mail server is offered. But I want to limit message size for each hosted domain and set message size for them.
Ex:
hosted domain 1: abc.com maxmessagesize is 10MB
and hosted domain 2: def.com maxmessagesize is 20MB.
Can anyone help me ?
I use Sun Convergence to send/recv email.>
Please always provide the version of Messaging Server that you are running (./imsimta version).
When I set service.http.maxmessagesize, service.http.maxpostsize parameters is 20MB, all hosted domain in mail server is offered. But I want to limit message size for each hosted domain and set message size for them.
Ex:
hosted domain 1: abc.com maxmessagesize is 10MB
and hosted domain 2: def.com maxmessagesize is 20MB.There is no per-domain service.http.maxmessagesize parameter. You can however restrict the size of the email that each domain can send at the MTA level through the use of a channel-level sieve e.g.
require ["ereject"];
# Restrict abc.com to 10MB
if address :domain :is "from" "abc.com" {
if size :over 10M {
ereject "Email exceeded maximum message size of 10MB for domain abc.com";
stop;
# Restrict def.com to 20MB
if address :domain :is "from" "def.com" {
if size :over 20M {
ereject "Email exceeded maximum message size of 20MB for domain def.com";
stop;
}Regards,
Shane. -
Domain login for Sun convergence
Hi,
i've created two domains on the sun convergence and created 5 users on each domain.
For instance
domainA.net - 5 users
domainB.net - 5 users
i took one user from domainA and logged with user name(login name) & password.it was sucessful.
but i took one user from domainB and logged with user name(login name) & password.but it failed.whereas i can able to logon with [email protected]
Please can you tell what modification to be done , inorder to the users on domainB can log on without the full email address.
Thanks
V BaluMake an A record for domainA.net and domainB.net to point to the server hosting iwc
User from domainA login to
http://mail.domainA.net/iwc
Users from DomainB login to
http://mail.domainB.net/iwc
Thats the easy way. -
Help Configuring Sun Convergence
Dear All ,
I try install com suite 7 in ldom :
this my guide
*1 http://wikis.sun.com/display/CommSuite6U2 /Sun+Java+Communications+Suite+6+Update+2+on+a+Single+Host#SunJavaCommunicationsSuite6Update2onaSingleHost-AddSvsLLOrg*
*2. http://wikis.sun.com/display/CommSuite7/Sun+Java+Communications+Suite+7+on+a+Single+Host+(Linux), i configure calender use this guide*
*3.for calender 7 i use http://wikis.sun.com/display/CommSuite7/Calendar+Server+7+Initial+Configuration*
all configure both calender and im 8x no error ,after that i configure Sun Convergence .
When i try login i can see web mail server also but i can not access the calender and can not login to IM ( i check svcs -a my im running well),
does any one have guide for setup calender 7 and Im 8x in Sun Convergence ?
regards
hadihadi74 wrote:
When i try login i can see web mail server also but i can not access the calender and can not login to IM ( i check svcs -a my im running well),
does any one have guide for setup calender 7 and Im 8x in Sun Convergence ?Calendar Server 7 does not yet integrate with Convergence -- this functionality is to be added in a future release of Communications Suite. If you want the calendar service in Convergence you will need to install and configure Calendar Server 6.3.
With regards to Instant Messaging Server, you will need to provide more details about what isn't working.
What do you mean by "can not login to IM"?
Are you able to access Instant Messaging server via the Java IM client?
Regards,
Shane. -
Sun Convergence - edit login page title
Hi,
I need to customize Convergence.
I need to change the title from 'Sun Convergence' (title in login page) to 'MyWebmail'. I tried look in login.html, index.html, main.html and don;t have idea where to edit this title.
Can anyone familiar with Sun Convergence give some help?mattzyzy wrote:
Then inside the Convergence after successfully logged in , how to change the title Sun Convergence to let say " SoccerMail " ,without quotes ? .If you are referring to the browser title, you can change this by setting the following in your resources.js customisation file:
login_product_name: "SoccerMail",Regards,
Shane. -
Sun Convergence default language
Question. Does anybody know, how to change default language of Sun Convergence client.
Changeing base.defaultlocale to different locale does not solve the problem.
After user logs out of the client it is redirected back to "en-us" loacle.
.../iwc_static/layout/login.html?lang=en-us&9.01_201327&svcs=abs,mail,calendar,c11n
Any idea where does "lang" parameter comes from?
Regards.Saulius23 wrote:
Question. Does anybody know, how to change default language of Sun Convergence client. Why are you asking this question i.e. what is the problem you are trying to solve?
Changeing base.defaultlocale to different locale does not solve the problem.
After user logs out of the client it is redirected back to "en-us" loacle.
.../iwc_static/layout/login.html?lang=en-us&9.01_201327&svcs=abs,mail,calendar,c11n
Any idea where does "lang" parameter comes from?The value of the "lang" parameter for the login page is dictated by the end-user browser preferences. So if the browser is configured to have a preferred language of "en-us" then you will see "lang=en-us".
Regards,
Shane. -
Sun Convergence for user with disabled calendar service
I have Communication Suite 7 installed with the "Sun Convergence" web interface.
I create a test user with a disabled calendar service (service package platinum).
The user test logged in in Sun Convergence web interface and I'm surprised,
that the calendar for him is available.
How can I disable the calendar view in Sun Convergence for user with disabled calendar service?
Thank you.petrahu wrote:
I'm getting the expected result with a service package for mail and calendar,
e.g. mercury, and setting the status of calendar service to inactive or disabled.The behaviour you are seeing is both "expected" (i.e. as per the current Convergence design) and "unexpected" (i.e. doesn't make sense from a DA service provisioning perspective). It is a real "can-o-worms".
The problem stems back to the "local.autoprovision" functionality provided at the Calendar Server end (enabled by default):
http://docs.sun.com/app/docs/doc/819-4654/acajh?l=En&a=view
"The first time a user logs in, the user's LDAP entry in updated to add calendar service, and a default calendar is created. The user entry must already exist in the LDAP directory. If it does not, an error is returned."
So even if the calendar service has not been granted at the Delegated Administrator end, the calendar server will "helpfully" add the required objectclasses/attributes when a client (such as Convergence) attempts to login as that user.
This means Convergence cannot automatically assume a user is not able to access the Calendar service based on the users current objectclass/attribute settings.
This leads to an existing bug for Convergence:
Bug#6871400 - "Mail only user is able to access the calendar service"
I've also created a new Change Request for Calendar Server:
RFE#6898717 - "local.autoprovision should be disabled by default"
Please raise this issue with Sun support (log a support request) if you believe the current behaviour is confusing/needs changing (i.e. fix the bug/RFE above).
Regards,
Shane. -
Hi All,
It's possible configure sun convergence to log the "user agent" without enable debug mode. ?
I try :
./iwcadmin -u admin -w password -o log.pattern -v '%c: %p from %C Thread %t ipaddress=%X{ipaddress} sessionid=%X{sessionid} useragent=%X{useragent} at %d{HH:mm:ss,SSS}- %m %n'
On log file I see:
ADDRESS_BOOK: INFO from com.sun.comms.client.ab.coresrv.DBHandler Thread httpSSLWorkerThread-8080-7 ipaddress=134.120.100.XXX sessionid=65d53131d03b5bcda3aewwwwdabdb useragent= at 15:53:53,540- Got DBPluginMap
TIA
Giovannigiovanni.romaneghi wrote:
It's possible configure sun convergence to log the "user agent" without enable debug mode. ? No. I've created a new request-for-enhancement for the log.pattern option:
RFE#6937204 - "Add ability to include browser user-agent string as part of the log.pattern syntax"
You will need to raise this RFE with your Sun account manager otherwise it will not be implemented.
Regards,
Shane. -
Hi,
I have 2 instances of Sun Convergence. Both instances run well, but Application (or Application Server) sometimes hung.
If it happen I have blank login screen, server has no load, can't login or do something.
I'm still watching with jconsole JVM behaviour and there are nothing strange (resources, connection, threads, memory - JVM looks normal). I register in server.log and jvm.log some jave exception. My Application Sevrer was tuned with Sun Convergence manual.
I wonder if some other people (Sun Convergence administrators) have noticed some similar.
IrekYou could try to disable the file cache in the AS server :
http://docs.sun.com/app/docs/doc/820-4343/abege?a=view
Cheers, Ben -
Sun Convergence - allow access with spaces as password
Hi,
We've discovered that Sun Convergence log in as any user when we write space sign without any other signs in password field. It's lok like ldap search (or bind) command fails if only spaces are in password field.
We use:
- Convergence with patch 12 and 10.
- Directory Server 5.2 (not recomennded, but on compatibile list)
We read some threards about similar problem with LDAP auth, but ... thera are not Sun Products. I suspect that problem are in LDAP (implementation Convergence requests).
We have temporary workaround, but ... it very bad. Any people have acces to any known user.
I woonder if some other have similar problem
regards
ITOracle does not comment on published reports of alleged Oracle product vulnerabilities. Please refer to Critical Patch Updates and Security Alerts (http://www.oracle.com/technology/deploy/security/alerts.htm) for more details on the policy.
Note: I still recommend you contact support for access to the latest Convergence patch (not yet available on SunSolve) which fixes known product vulnerabilities.
Maybe you are looking for
-
Reserved Words not Highlighted in Oracle SQL Developer
Hi believe that issue has already been raised however this is more widespread (i.e. %FOUND, %NOTFOUND and %ISOPEN to name a few)
-
Hello, When I create purchase requisition for an activity in Project, it creates commitment with PR amount. Requirement is that system should generate commitment on PO creation rather than PR. Where can I make this setting. Please guide... Thanks.
-
Installation hangs every time with 6 items remaining. I an considering buying a newer model of Dymo: which models will work with ML? Lou
-
Forced page break: space
When I insert a forced page break, the text moves to the next page but there's roughly a 1-M space before it -- in the middle of a sentence. If I force the text back to occupy the unwanted space, the space simply moves to the end of the text on the p
-
Error when first run page using SelectOneChoice objects
Hi! I had following error, when I run my jspx page: <FacesCtrlListBinding><getInputValue> ADFv: Could not find selected item matching value Vitis of type: java.lang.String in the list-of-values. When I press refresh button in browser, then I can see