Foto Synchronisation with ipad does not work correctly

New Photos after installing the Mavericks update doe not synch. with iPad.
The fotos are visible on iPhoto on the Mac , but no transfer via iTunes are possible to the iPad.
Any tip to resolve?

Thanks. Any other option, if I dont like to put all my photos to the iCloud but still synch with the iPad as before?

Similar Messages

Security filter with variable does not work correctly

Helo,
I have one table with this columns (called BI_USERS):
USERBI | REGIONS
XXXX 10,5 -> In this case the user XXX can access the region 10 and 5
AAA 9,7
I use this table to apply the security filters. Fisrt I did a initialization block with the select: SELECT USERBI, REGIONS FROM BI_USERS WHERE USER = :USER
This select populate two variables: variable USER (system variable) and UserRegion (Non-system variable)
After I use the UserRegion variable in the securty filter of the one group of users. For exemple:
Name | Status | Business Model Filter
"Claro"."Historico Saldo Pre-Pago" Enabled "Claro"."Historico Saldo Pre-Pago"."DW_UN_NEG" In(VALUEOF(NQ_SESSION.*UserRegional)* )
But the issue is that the query is not working, because the query created for BIServer no use the IN operator. Seems the IN operator is changed for equal (=).
And the query returs error because the value 10,5 (for example) is not a numeric value.
Anybody could help me, please? I am using the version 10.1.3
Mauricio

|||\/||| wrote:
Helo,
I have one table with this columns (called BI_USERS):
USERBI | REGIONS
XXXX 10,5 -> In this case the user XXX can access the region 10 and 5
AAA 9,7
I use this table to apply the security filters. Fisrt I did a initialization block with the select: SELECT USERBI, REGIONS FROM BI_USERS WHERE USER = :USER
This select populate two variables: variable USER (system variable) and UserRegion (Non-system variable)
After I use the UserRegion variable in the securty filter of the one group of users. For exemple:
Name | Status | Business Model Filter
"Claro"."Historico Saldo Pre-Pago" Enabled "Claro"."Historico Saldo Pre-Pago"."DW_UN_NEG" In(VALUEOF(NQ_SESSION.*UserRegional)* )
But the issue is that the query is not working, because the query created for BIServer no use the IN operator. Seems the IN operator is changed for equal (=).
And the query returs error because the value 10,5 (for example) is not a numeric value.
Anybody could help me, please? I am using the version 10.1.3
MauricioHi Mauricio,
First of all you have some syntax errors with your init block:
select USERBI, REGIONS from BI_USERS WHERE upper(USER)=upper(':USER');
Couple things to consider here:
1) Why are you selecting Userbi column from the table? Is USER system session variable not getting populated through other souces like LDAP or default security?
Ans: If your user session variable is getting populated from a different init block, then you dont need to select that column. Then your init block would look something like this:
select 'USERREGIONAL', REGIONS from BI_USERS WHERE upper(USER)=upper(':USER'); - Data Source
Row Wise Initialization - Data Target
Initblock that is populating the user session variable as the order of precedence.
2) If you dont have USER session variable populating from any other source, then your init block would look something like below:
select 'USER', USERBI, "USERREGIONAL', REGIONS from BI_USERS; - Data source
Row Wise Initialization - Data target
After following one of the above two steps, you need to apply the filters on the table.
"Claro"."Historico Saldo Pre-Pago"."DW_UN_NEG" IN(VALUEOF(NQ_SESSION.USERREGIONAL))
Note: Make sure you understand that variables are case sensitive.
Please award points as this is correct answer.
Thanks,
-Amith.
Edited by: Amith on May 10, 2011 3:18 PM

Default Data Deduplication Optimisation job with "StopWhenSystemBusy" does not work correctly

I have configured Data Deduplication on Windows Server 2012 R2 and enabled on a volume.
Data Deduplication creates a default Optimisation task called "BackgroundOptimization".
I have placed files on my volume, and started the job manually. It succeeds but does nothing. InPolicyFiles still shows zero.
If I edit this job in Task Scheduler and remove the /backoff switch (StopWhenSystemBusy), then start the job manually again, it succeeds, and also incrememnts the InPolicyFiles.
At the same time, the CPU and RAM on the server is fairly idle, with no users on the system.
Is there a problem with the StopWhenSystemBusy? Should we not use this parameter, and simply run the task out of business hours instead? Has anyone seen this before?
This happens on two Windows Server 2012 R2 servers, so is reproducable here.
David

Hi David,
Please also try -Priority and -Memory with-StopWhenSystemBusy - set Priority to High and set a proper memory value such as 50% to see the result.
If you have any feedback on our support, please send to [email protected]

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

How do I get a refund for an App that does not work correctly?

How do I get a refund for a App (Express Newspapers) that does not work correctly?

How to report an issue with Your iTunes Store purchase

Focus under Win2k does not work correctly

Hi,
we've found out that the focus does not work correctly under Windows 2000 in
Seamless Mode (App is a Windows Application running on Windows Terminal Server
2003), the same application has no problems under Windows XP, Apple Macintosh
and Linux.
Example: The application has a button which pop's up a small calendar window
giving that window focus. In Tarantella under Win2k however you just see the
window popping up shortly and then going in the background. As the window is in
the background and you can't get the window back and you also cannot work
further in that application as the rest is inactive.
Only way is to do a right-click on the application in the taskbar, which brings
the window in the foreground again. What makes this problem even harder to
analyze is, that it sometimes even works correctly (around 3 of 10 times).
We've mostly recognized this with modal windows. The native client does not have
this problem, however as far as I know it does not support seamless mode.
2. The second problem we got is, that if you click with the mouse into the
initializing Window while the application starts up after you have clicked on an
application Link in SGD (I mean the Pre-Login window of Windows which shortly
shows up just before the Login Process begins),
the application is not started seamlessly but is started within that window and
you have no chance but closing an restarting the application to get it in
seamless mode. This is seen on all Client Operating Systems by us and not only
Windows 2000.
The Client runs:
Windows 2000 SP4 all updates installed
Java: 1.5.0-5
Browser: IE6.0 and Firefox 1.0.7
Server: Windows 2003 Terminal Server (all updates installed)
Tarantella: 4.20.909
I hope that someone has at least a workaround.
Regards
Carsten

I have organized some testcases attached are 3 Test Programs which work
nice natively but got these problems under Tarantella under every Windows
Operating System (the error is not Windows 2000 as I previously mentioned but
also occurs on Windows XP).
The interesting thing is that the Test Program made with .NET does not show this
problem.
Could someone please test these and tell if this error is reproducible on your
systems as well ?
Run these Testprograms natively, they show no misbehavior.
Execute this from a SGD Webtop Session in Seamless Mode, see that
the Modal window is not modal but shifts into the background on every 2 -3 click.
Regards
Carsten
[ModalTestPrgs.zip]

Since I upgraded to Yosemite, my CS5 does not work correctly.

Since I upgraded to Yosemite in October, my photoshop CS5 does not work correctly. When right clicking to change a brush size, the adjuster when moving to the right or left, either sticks or moves radically. As I set the size of the brush and move my cursor back to the image, the adjuster moves with the cursor.
Help!

sharonfrombury wrote:
Is there no contribution from Apple support community for this question yet? I know there have been teething problems upgrading to Yosemite, but this loss of functionality is adding administrative workload that I can ill afford. Come on Apple, some ray of light please.
If you read the Terms of Use you agreed to you would realize Apple does not read or participate in these user forums. All posts and responses are end users just like yourself. If you have feedback for Apple please post it at www.apple.com/feedback. Please do not expect to hear back from Apple, they read the feedback but do not reply.
Also, the feature the feature of combining multiple PDF's into one document using the Preview app works perfectly.

After sending sound from find my iphone, now ipad does not work

after sending sound from find my iphone, now ipad does not work
it can't be unlock and scrren is blank, only siri works

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

SB Titanium Fatal1ty Champ - Frontpanel does not work correctly

?SB Titanium Fatalty Champ - Frontpanel does not work correctly? good morning,
i use the fatalty with the - champ - frontpanel. Unfortunately this panel does not work correctly. that means is have sound at the headphones and can use the mic but i cannot change the volume (HP and Mic)and cannot change?game mode, cmss-3d and crystalizer.
i?tested this card on two operating systems (one of the totally new) but the frontpanel does not work.
I try the driver from CD, the newest which will be found by creatives autoupdate driver search and i check youp pak but none of them will help.
Internal Soundcard of my mainboard is deactivated.
The hardware is not damaged - i try two different titanium cards with two frontpanels...
here my system:
[color="#0000ff" face="Book Antiqua">MSI DKA790GX Platinum , Cooler Master CM 690
AMD Phenom X4 9950BE @ 3,2GHZ, Logitech Z-4e
4GB Kingston HyperX DIMM 2 GB DDR2-800 Kit
MSI N260GTX-T2D896-OC @707MHZ
Xilence RedWing Gaming Edition Modular - 750 Watt
Creative X-Fi Titanium Fatalty Champion Series
Windows Vista Ultimate 32-Bit; Samsung T260
so...what can i do now? i have no idea what to test now?
brgds
stefan

So nobody actually has any idea what the problem is? I'm not the thread-bumping type, but this is a very annoying issue and if anyone has any useful information I would greatly apprecaite it.

Foto Synchronisation with ipad does not work correctly

Similar Messages

Maybe you are looking for